REPAIR/ MAINTENANCE OF INTERNAL WIRING WITH LED FITTINGS AND FIXTURES i.e, DBs, SWITCH SOCKETS, CEILING FAN, EXHAUST FAN, WALL MOUNTED FAN AND PEDESTAL FAN ETC AND ALLIED WORKS IN TECH AREA AT AF STN NAL

Amount

Taking down Copper/Aluminium Point Wiring any type including PVC casing caping /PVC Conduit (Light, Fan, Socket or Power) excluding Fixture and Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets, Light Fittings of any description and Making Good Disturbed Surfaces of Walls, Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed.

Taking down carefully MCB Distribution board SPN/TPN off sizes & any capacity by unscrewing from DB box, all as directed.

M&L Point wiring for One light/fan point controlled by one switch with PVC insulated fire retardant low smoke (FRLS) multi stranded copper conductor cable of 1.5 sqmm in and including PVC concealed rigid conduit heavy duty (ISI mark) and pressed steel terminal boxes (for mounting switches / sockets /regulators / ceiling roses etc) made out of MS sheet not less than 1.6 mm and 6cm depth including painting with one coat of red oxide primer on internal and external surface covered with 3mm thick laminated plastic sheet ISI marked including 1.5 sqmm PVC insulated fire retardant low smoke (FRLS) multi stranded copper conductor cable as earth continuity wire connected to common earth and each terminal box/fitting all as specified and directed . Note :- (i)The wiring shall be provided in standard colour code i.e. Red for Phase, Black for Neural and Green for earth. (ii) The quoted rate is deemed to include for cutting/chasing for concealing the conduit and making good the surface to match the existing surfaces. (iii) In case of ceiling portion where concealed conduiting is not possible, the surface conduit shall be provided ad directed. (iv) The earth wire shall be connected to common earth and each terminal boxes and fitting all as directed.

All as per description of serial item No. 3.00 here in before but for One 3-pin socket outlet 5 Amp on independent board.

All as per description of serial item No. 3.00 here in before but one 3 pin socket outlet 5 Amp on same board

All as per description of serial item No. 3.00 here in before but for One 5-pin socket outlet 5/6 & 15/16 Amp on independent board. with 2.5 sqmm FRLS multistranded copper cable including 2.5 sqmm FRLS multistranded copper cable as earth continuity wire connected to common earth and each terminal box/fitting complete all as specified and directed.

M&L Point wiring for One light/fan point controlled by one switch with PVC insulated fire retardant Low smoke (FRLS) multi stranded copper conductor cable of 1.5 sqmm in and including double locked PVC casing caping and pressed steel terminal boxes (for mounting switches / sockets / regulators / ceiling roses etc) made out of MS sheet not less than 1.6 mm and 6cm depth including painting with one coat of red oxide primer on internal and external surface covered with 3mm thick laminated plastic sheet ISI marked including 1.5 sqmm PVC insulated fire retardant low smoke (FRLS) multi stranded copper conductor cable as earth continuity wire connected to common earth and each terminal box/fitting all as specified and directed . Note :- (i)The wiring shall be provided in standard colour code i.e. Red for Phase, Black for Neural and Green for earth. (ii) The earth wire shall be connected to common earth and each terminal boxes and fitting all as directed.

All as per description of serial item No. 7.00 here in before but for One 3-pin socket outlet 5 Amp on independent board.

All as per description of serial item No. 7.00 here in before but one 3 pin socket outlet 5 Amp on same board

All as per description of serial item No. 7.00 here in before but for One 5-pin socket outlet 5/6 & 15/16 Amp on independent board. with 2.5 sqmm FRLS multistranded copper cable including 2.5 sqmm FRLS multistranded copper cable as earth continuity wire connected to common earth and each terminal box/fitting complete all as specified and directed.

All as per description of serial item No. 7.00 here in before but for One industrial power socket 20 Amp on independent board with 4 sqmm FRLS multistranded copper cable including 4 sqmm FRLS multistranded copper cable as earth continuity wire in existing conduit connected to common earth and each terminal box/fitting complete all as specified and directed.

M&L Point wiring for One light/fan point controlled by one switch with PVC insulated fire retardant low smoke (FRLS) multi stranded copper conductor cable of 1.5 sqmm in and including on surface in stove enameled steel conduit min 20mm dia (ISI mark) and pressed steel terminal boxes (for mounting switches / sockets /regulators / ceiling roses etc) made out of MS sheet not less than 1.6 mm and 6cm depth including painting with one coat of red oxide primer on internal and external surface covered with 3mm thick laminated plastic sheet ISI marked including 1.5 sqmm PVC insulated fire retardant low smoke ( FRLS) multi stranded copper conductor cable as earth continuity wire connected to common earth and each terminal box/fitting all as specified and directed . Note :- (i)The wiring shall be provided in standard colour code i.e. Red for Phase, Black for Neural and Green for earth. (ii) The earth wire shall be connected to common earth and each terminal boxes and fitting all as directed. (iii)The quoted rate shall include the cost of saddling and fixing of steel conduit.

All as per description of serial item No. 12.00 here in before but for One 3-pin socket outlet 5 Amp on independent board.

All as per description of serial item No. 12.00 here in before but one 3 pin socket outlet 5 Amp on same board

All as per description of serial item No. 12.00 here in before but for One 5-pin socket outlet 5/6 & 15/16 Amp on independent board. with 2.5 sqmm FRLS multistranded copper cable including 2.5 sqmm FRLS multistranded copper cable as earth continuity wire connected to common earth and each terminal box/fitting complete all as specified and directed.

Taking out the existing burnt sub main wiring of size 4 Sqm / 6 Sqmm PVC insulated multi stranded aluminum conductor cable along-with earth continuity conductor including the PVC / rigid steel, concealed/surface conduit complete all as specified and directed.

Supply and laying sub main wiring complete with 03 runs (Phase, Neutral & Earthing colour code) of single core 6 sqmm fire retardant low smoke (FRLS) PVC insulated copper conductor cable multistranded and sheathed LT 1100 V grade drawn through and including non metallic PVC conduit 20mm dia ISI marked and accessories surface fixed on wall /floor etc all as specified. Note:- 03 runs of cable and one run of PVC conduit(20 mm size) shall be considered as one unit(i.e. RM) for measurement purposes.

Supply and laying sub main wiring complete with 03 runs (Phase, Neutral & Earthing colour code) of single core 4 sqmm fire retardant low smoke (FRLS) PVC insulated copper conductor cable multistranded and sheathed LT 1100 V grade drawn through and including non-metalic conduit 25mm dia ISI marked and accessories surface fixed on wall /floor etc all as specified. Note:- 03 runs of 01 metre cable and 01 run of PVC conduit (25 mm ) shall be considered as one unit(i.e. RM) for measurement purposes.

Supply and laying sub main wiring complete with 05 runs ( 3 nos for three phase, Neutral & Earthing colour code) of single core 4 sqmm fire retardant low smoke (FRLS) PVC insulated copper conductor cable multistranded and sheathed LT 1100 V grade drawn through and including non- metalic conduit 25mm dia ISI marked and accessories surface fixed on wall /floor etc all as specified. Note:- 05 runs of cable 01 metre 01 run of PVC conduit(25 mm) shall be considered as one unit(i.e. RM) for measurement purposes.

Supply and laying sub main wiring complete with 05 runs ( 3 nos for three phase, Neutral & Earthing colour code) of single core 6 sqmm fire retardant low smoke (FRLS) PVC insulated copper conductor cable multistranded and sheathed LT 1100 V grade drawn through and including non metalic conduit 25mm dia ISI marked and accessories surface fixed on wall /floor etc all as specified. Note:- 05 runs of cable 01 metre 01 run of PVC conduit (25 mm )shall be considered as one unit(i.e. RM) for measurement purposes.

Supply and fixing in repairs Switch piano flush type single pole one way 5/6 amp complete all as specified and directed.

Supply and fixing in repairs Switch piano flush button single pole one way 15/16 amp complete all as specified and directed.

Supply and fixing in repairs Switch piano flush type single pole two way 5/6 amp complete all as specified and directed..

Supply and fixng in repairs bell push flush type single pole one way 5 amp complete all as specified and directed.

Supply and fixing in repairs Socket out let 2 in 1, 3 pin, 5/6 and 15/16 amp multipurpose, flush type complete all as specified and directed.

Supply and fixing in repairs Ceiling rose surface Bakelite 65 x 50 mm three terminals complete all as specified and directed.

S&F call bell AC 230 volt single pole complete all as specified and directed.

supply and fix as in repairs MCB DB single pole and neutral 240 volt SPN 04 way with 200 Amps rated bus bar double door type complete all as specified and directed.

All as per description of serial item No. 28.00 here in before but 8 way

All as per description of serial item No. 28.00 here in before but 12 way

Supply and fix as in repairs MCB SPN 10-32 Amps 240Volts, Breaking capacity 10 KA 'C' curve complete all as specified and directed.

Supply and fix as in repairs MCB SP 6-32 Amps 240Volts, Breaking capacity 10 KA 'C' curve complete all as specified and directed.

Supply and fix as in repairs MCB TPN 63 Amps 415 Volts, Breaking capacity 10 KA 'C' curve complete all as specified and directed.

Supply and fixing as in repairs TPN DB double door, IP 45 protection with powder coated enclosure 4 way insulated bus bar complete all as specified and directed. Note: MCB shall be of same make as of DB.

Supply and fixing as in repairs vertical TPN DB double door, IP 45 protection with powder coated enclosure 4 way insulated busbar assembly including MCCB 4 pole, 415 V, 125A, 16 kA - 01 No complete all as specified and directed. Note: MCCB and MCB shall be of same make as of DB.

Supply and fix IP-20 linear Retro LED T-8 tubular lamp with extruded aluminium / PC body and PC diffuser complete with inbuilt driver 1x20 watt, in existing batten/fitting after removing the old choke, stater including electrical connection complete all as specified and directed. Make: Crompton Greaves Cat Ref LTT8-20 or equivalent with makes as specified in list of makes.

All as per description of serial item No. 35.00 here in before but 10 watt.

Suply and fixing Lamp holder angular PVC polycrbonate type with back plate suitable for PVC casing capping/conduit fitting complete.

S&F as in repairs modular switch 10 Amp one way switch one module complete all as specified and directed.

S&F as in repairs modular multi socket 10 Amp 2/3 pin two module complete all as specified and directed.

S&F as in repairs modular switch 25 Amp one way switch one module complete all as specified and directed.

S&F as in repairs modular socket 25 Amp 2/3 pin two module complete all as specified and directed.

S&F as in repairs modular metal box with frame & cover and plate suitable for one module complete all as specified and directed.

S&F as in repairs modular metal box with frame & cover and plate suitable for two module complete all as specified and directed.

S&F as in repairs modular metal box with frame & cover and plate suitable for three module complete all as specified and directed.

S&F as in repairs modular metal box with frame & cover and plate suitable for four module complete all as specified and directed.

S&F as in repairs modular metal box with frame & cover and plate suitable for six module complete all as specified and directed.

Suply and fixing as in repairs recessed LED Driver with input voltage 90-300 V AC , max current 0.7 A and output voltage 40-55 V for ceiling panel layout suitable for 600X600 MM modular ceiling grid and also can be suspended with provided kit complete all as specified and directed. Make as per exhisting.

Suply and fixing as in repairs recessed LED ceiling panel provided with best in class aesthetics premium white poeder coated frame blends seamlessy with ceiling layout suitable for 600X600 MM modular ceiling grid and also can be suspended with provided kit complete all as specified and directed. MAKE-crompton greaves CAT REF:-LCPL-36-CDL(2x2) or equivalent with makes as specified in list of makes.

Suply and fixing as in repairs integrated LED bulk head luminaire 1 x 10 watt comprising of pressure die cast housing, acrylic diffuser & frame IP65 protection & available in 5700k (CDL) & 3000K (WW) colour temperatures pre-wired incl connection with flexible twin core wire complete all as specified and directed. MAKE-crompton greaves CAT REF- LBHN-10-CDLor equivalent with makes as specified in list of makes.

Supply and fixing as in repairs IP-20 linear Retro LED T-8 tubular lamp 10 watt with extruded aluminium/ PC body and PC diffuser complete with inbuilt driver 1x10 watt Cat Ref LTT8-10, including new Decorative box type, prewired LED tube, blue colored end caps complete all as specified and directed. Make: Crompton Greaves Cat Ref DMLN1 LT8-8/10 or equivalent with makes as specified in list of makes.

Supply and fixing as in repairs IP-20 linear Retro LED T-8 tubular lamp 20 W with extruded aluminium/ PC body and PC diffuser complete with inbuilt driver 1x20 watt Cat Ref LTT8-20, including new Decorative box type, prewired LED tube, blue colored end caps complete all as specified and directed. Make: Crompton Greaves Cat Ref DMLN1 LT8-16/20 or equivalent with makes as specified in list of makes.

S&F as in repairs sheet metal enclosure single pole and neutral encolsure with two pin and earth plug and socket complete with provision for fixing of one MCB SP 20 Amps complete all as specified and directed.

Supply and fixing as in repairs stepped type electronic fan regulator , SP 230 Volt 100/120 watt complete all as specified and directed.

Supply and fixing as in repairs LED PLL lamps retro fit 18 watt suitable for security light fittings 1x18 watt, complete all as specified and directed.

Attending day to day complaints for ceiling fan, exhaust fan and wall mounted fans installed at various locations in AF Stn Nal and rectifying the complaints complete all as directed by Engr-in-Charge. Note : (i) Defective parts / winding required to be replaced shall be measured and paid separately under respective items. (ii) Cost of taking down of fan and re-fixing where required shall be included in the unit quoted rate

M&L Dismantling blades, down rod, canopy and taking out burnt stator assy of ceiling fan 48"/56" sweep and taking down old burnt copper stator winding, cleaning stator slots, rewinding of stator assy with appropriate gauge of super enamelled copper winding wire, insulating material complete and assembling ceiling fan and testing for proper function including provision of split pin of suitable sizes and writing MES No ( Letter size shall be minimum 5 mm width x 15 mm heigh) complete all as specified and directed. Note: Cost of taking down of fan and re-fixing is included in unit rate of item No. 50 of this Schedule.

Repair stator shaft suitable for fixing top and bottom bearings, including grinding, polishing and fixing suitable for ceiling fan of any Make and any sweep complete all as specified and directed. Note: Bearings shall be measured and paid as 'Supply only' under relevent item of this schedule.

Supply only self lubricated ball bearing of SKF 6201 complete all as specified and directed. Make : NBC/SKF/Tata

Supply only self lubricated ball bearing of SKF 6202 complete all as specified and directed. Make : NBC/SKF/Tata

Supply only gun metal self lubricated bush bearings suitable for ceiling fan 48"/56" complete all as specified and directed

Supply only fan condenser 2.5 mfd, 50 Hz, 240 Volts complete all as specified and directed

Supply only fan condenser 4 mfd, 50 Hz, 240 Volts complete all as specified and directed

Supply and fixing flexible twin core PVC insulated copper cable of size 1.5 sqmm complete all as specified and directed

M&L for Taking down existing ceiling fan of size 48" or 56 " from fan hook servicing of ceiling fan, cleaning throughly, greasing ball bearings, oiling bush bearing, replacing split pin and rubber real and including and fixing back in position complete all as specified and directed.

Supply and fix as in repair socket piano flush type single pole two way 5/6 amp complete all as specified and directed..

Supply only down rod of fan suitable as per site condition 45/60 Cm with rubber real, clamp,nut bolts,and spring.

Opening the exhaust fan, removing the burnt copper winding wire complete cleaning the slots, stator and the rotors and rewinding the exhaust fan 250/300/ 380/ 450 mm sweep with existing gauge super enamelled copper conductor including varnishing and heating and re-installation etc and re-assembling complete including writing MES No. ( Letter size shall be minimum 5 mm width x 15 mm height) complete all as specified and directed. Note: (i) Spare / Part such as Bearing / winding to be replaced shall be measured and paid for separately as 'Supply only' under respective item of this schedule. (ii) Cost of taking down of fan and re-fixing is included in unit rate of item No. 1 of this Schedule.

Supply only ball bearing suitable for exhaust fan 250 / 300 / 380 / 450mm sweep complete all complete all as specified. Make : NBC/SKF/Tata

Supply and fixing as in repairs metal louvers with frame suitable for 250/300/380/450 mm sweep exhaust fan complete all as specified and directed (As per sample).

M&L Opening the cabin fan / wall mounted fan / table fan / pedastal fan 400/450 mm sweep, removing the burnt copper winding wire complete, cleaning the slots, stator and the rotors and rewinding with existing gauge super enamelled copper conductor including varnishing and heating and re-installation of fan etc complete including writing MES No. ( Letter size shall be minimum 5 mm width x 15 mm height) complete all as specified and directed. Note: (i) Spare / Part such as Bearing / winding to be replaced shall be measured and paid for separately as 'Supply only' under respective item. (ii) Cost of taking down of fan and re-fixing is included in unit rate of item No. 1 of this Schedule.

Supply only ball bearing suitable for cabin fan / wall mounted fan / table fan / pedastal fan of sweep 250 / 300 / 380 / 450mm complete all as specified and directed. Make : NBC/SKF/Tata

Supply and fixing as in repairs fibre made fan blade of table fan / cabin fan / wall mounted fan / pedastal fan, colour and size as per existing complete all as specified and directed.

Supply and fixing as in repairs metal grill cover of table fan / cabin fan / wall mounted / pedastal fan 250 / 300 / 380 / 450mm sweep of existing make and colour as specified and directed.

RAJENDER ENTERPRISES

m/s gaurav enterprises

B.K. ROY & SONS