REPAIR TO SEWAGE PUMP PANEL AND RELATED WORKS AND DG SET AND ESSENTIAL RECTIFICATION OF LEAKAGE OF SEWAGE PUMPING LINE UNDER AGE EM OF GE WEST FEROZEPUR CANTT

Amount

Dismantling of defective centrifugal sewage motor complete of capacity 20 HP to 30 HP by removing cable connection from LT panel and taking out carefully, transporting to repair workshop for repair. Reassembling after repair and testing, transporting back to sewage well re-installation by connectiing electric cable to LT panel and testing complete all as specified and directed. Note :-(i) The cost also includes for making stand by arragnment to avoid any type of breakdown by putting standby motor/pumpset all as directed by Engr-in-charge. (ii)Minor Items costing up to RS 300/- i.e gland packing, Nuts bolts , insulation tape, Rubber seal, Hozing bushes etc required are deemed to be included in unit rate of above item. (iii) spares parts required for repair will be measured and paid under relevent item of Sch 'A' as supply only. (iv) Labour required for dismantling the defective pump set for removing of defective spare parts and re-assembling after fixing new spares are deemed to be included in unit rate of above item. (v) Cont.will send daily his rep to E/M yard for getting complaint, after getting complaint contracter will rectified bottelnecks with in 48 Hrs if fail for any reason,a fine of Rs 500/- per day

All as per item No 1.00 here in before but for capacity 50 HP to 60 HP pump set.

All as per item No 1.00 here in before but for capacity 7.5 HP to 17.5 HP pump set.

All as per item No 1.00 here in before but for capacity 02 HP to 05 HP pump set.

Dismantling of defective centrifugal sewage pump set of capacity 4770/2900 LPM by removing cable connection from LT panel and suction & delivery pipe lines and taking out carefully, transporting to repair workshop for repair. Reassembling after repairs and testing, re-installation by connecting suction & delivery pipe line, connecting electric cable to LT panel and testing complete all as specified and directed. Note :- Minor Items ie gland packing ,Nut bolts insulation tape and greasing etc. required are deemed to be included in unit rate of above item. (i) Spare parts required for repair will be measured and paid under relevant item of seh “A” as supply only. (ii) Labour required for dismantling the pump set for removing defective spare parts and re-assembling after fixing new spares are deemed to be included in unit rate of above item. (iii) Cont will send daily his rep to yard for getting complaint, after getting complaint contracter will rectified bottelnecks with in 48 Hrs if fail for any reason,a fine of Rs 500/- per day

All as per item No 5.00 here in before but for capacity 2400 LPM/ 1500 LPM pump set.

All as per item No 5.00 here in before but for capacity 975 LPM/ 372 LPM pump set.

Supply and fixed in repair Ball Bearing No.6310. (spare parts) of Sewage pumps of capacity 20 HP to 30 HP complete all as specified and directed. Make :-SKF/NBC/GPZ.

Supply and fixed in repair Ball Bearing No.6309. (spare parts) of Sewage pumps of capacity 7.5 HP to 17.5 HP complete all as specified and directed.Make :-SKF/NBC/GPZ.

Supply and fixed in repair Ball Bearing No.6308 (spare parts) of Sewage pumps of capacity 02 HP to 5 HP complete all as specified and directed. Make :-SKF/NBC/GPZ.

Supply and fixed in repair Shaft sleeve MS for 20 HP to 30 HP with key motor pump set (spare parts) of Sewage pumps complete all as specified and directed.

Supply and fixed in repair Shaft sleeve MS for 7.5 HP to 17.5 HP with key motor pump set (spare parts) of Sewage pumps complete all as specified and directed.

Supply and fixed in repair Shaft sleeve MS for 02 HP to 05 HP with key motor pump set (spare parts) of Sewage pumps complete all as specified and directed.

Supply and Fixed in Rubber Coupling upto No.14 of sewage pumps of capacity upto 20 HP Motor Pumpset

Supply and Fixed in Rubber Coupling No.15/ Coupling No. 16 of sewage pumps of capacity 30 HP / 40 HP Motor Pumpset

Supply and Fixed in Rubber Coupling No.19 of sewage pumps of capacity 60 HP Motor Pumpset

S&F Thermal over load relay type RT21M relay range 9-13 Amps make Havells cat No-IHNR11AM as approved by Engr-in-Charge

S&F Thermal over load relay type RT21N relay range 12-18 Amps make Havells cat No-IHNR11AM as approved by Engr-in-Charge

S&F Thermal over load relay type ML-2/3 relay range 9-14 Amps make L&T cat No-SS9185900AO or equivalent in Havells / Siemens as approved by Engr-in-Charge

S&F Thermal over load relay type ML-2/3 relay range 13-21 Amps make L&T cat No-SS9185900CO or equivalent in Havells / Siemens as approved by Engr-in-Charge

S&F Thermal over load relay type ML-2/3 relay range 20-32 Amps make L&T cat No-SS9185900EO or equivalent in Havells / Siemens as approved by Engr-in-Charge

S&F Thermal over load relay type ML-2/3 relay range 28-42 Amps make L&T cat No-SS9185900FO or equivalent in Havells / Siemens as approved by Engr-in-Charge

S & F single phasing preventor/protection relay type VVSP-2 or equivalent Make L&T or equivalent as specified and directed

S & F in replacement of Digital Ampere meter 0-400 Amp with 3 Phase 96x96 Sqmm with CT ratio 200/5 as per site requirement size complete all as specified and directed by Engineer-in-Charge

S & F in replacement of Indicator lamp LED type on all phases (R,Y,B) - 03 Nos as per site requirement

S&F of Flat Three Core 10 Sqmm PVC Insulated & PVC Sheathed Industrial Cable for Submersible Pump Motors1100 Volt, conforming to IS 694 MAKE : Havells/Finolex/Polycab.

S&F of Flat Three Core 6 Sqmm PVC Insulated & PVC Sheathed Industrial Cable for Submersible Pump Motors1100 Volt, conforming to IS 694 MAKE : Havells/Finolex/Polycab.

M&L in repair on load change over switch 4 pole 200 Amps cap with centre handle complete all as specified and directed

M&L in repair on load change over switch 4 pole 100 Amps cap with centre handle complete all as specified and directed

M&L in repair on load change over switch 4 pole 63 Amps cap with centre handle complete all as specified and directed

Dismantling of defective Submersible sewage motor pumpset of capacity 7.5 to 10 HP by removing cable connection from LT panel and suction & delivery pipe lines and taking out carefully, tranporting to workshop for repair.Reassembling after repairs and testing, transporting back to sewage well reinstallation by connecting suction & delivery pipe line connecting electric cable to LT panel and testing complete all as specified and directed. Note :-(i) The cost also includes for making stand by arragnment to avoid any type of breakdown by putting standby motor/pumpset all as directed by Engr-in-charge. (ii)Minor Items costing up to RS 300/- i.e gland packing, Nuts bolts , insulation tape, Rubber seal, Hozing bushes etc required are deemed to be included in unit rate of above item. (iii) spares parts required for repair will be measured and paid under relevent item of Sch 'A' as supply only.(iv) Labour required for dismantling defective pump set for removing of defective spare partsand re-assembling after fixing new spares are deemed to be included in unit rate of above item. (v) Cont will send daily his rep to yard for getting complaint, after getting complaint contracter will rectified bottelnecks with in 48 Hrs if fail for any reason,a fine of Rs 500/- per day

All as per srl item No 40.00 here in before but 3 HP to 5 HP.

M&L for rewinding of centrifugal electric motor cup 20 HP to 30 Hp with super enameled copper winding wire emake HTP/Devi Dyal of size/ gauge after providing 'F' class insulation material and varnishing complete all as specified. Note : Contracter will give Warranty of rewinded motor for at least 1 yr minimum.

All as per item No 42 here in before but 50 HP to 60 HP

All as per item No 42 here in before but 7.5 HP to 17.5 HP

All as per item No 42 here in before but 2 HP to 5 HP

M&L for rewinding of submersible electric motor cap 7.5 to 10 HP with PVC insulated copper wire of existing size/guage make HTP/ Devi Dyal/National including insulation material complete all as required. Note : Contracter will give Warranty of rewinded motor for at least 1 yr minimum.

All as per item No 46 here in before but 3 HP to 5 HP

supply and Laying XLPE insulated, heavy duty FRLS electric cable with aluminium conductor 1100 Volts grade, cross-sectional area 35 sqmm 3.5 core all as Specified and as directed by the Engineer-in-Charge.

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep for pipe line/cable in any type of soil getting out and levelling of bottom surface to required level all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25Cum thick all as specified and directed.

Removing excavated material from site to a distance not exc 50 mtr away and depositing where directed not exc 1.5mtr from the starting point all as directed.

Supplying and laying of Sub class 'B' bricks in trenches for protection to cable all as specified.

Supplying and laying in trenches Jamuna Sand for cushioning as specified.

M&L Copper Cable 1100 Volts grade cross sectional area 25 Sqmm Single Core complete all as specified and directed.

M&L Copper Cable 1100 Volts grade cross sectional area 16 Sqmm Single Core complete all as specified and directed.

M&L Copper Cable 1100 Volts grade cross sectional area 10 Sqmm Single Core complete all as specified and directed.

S&F Copper thimble of 95 Amps Make: Dowell/Action

S&F Copper thimble of 70 Amps Make: Dowell/Action

S&F Copper thimble of 50 Amps Make: Dowell/Action

S&F Copper thimble of 35 Amps Make: Dowell/Action

S&F MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA of Make L&T or equivalent in Havell's/Siemens/Indoasian

S&F MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA of Make L&T or equivalent in Havell's/Siemens/Indoasian

S&F in replacement moulded case circuit breakers 3 pole 100 Amps having breaking capcity 16 KA at 415 volts of Make L&T or equivalent in Havell's/Siemens

S&F in replacement moulded case circuit breakers 3 pole 63 Amps having breaking capcity 16 KA at 415 volts of Make L&T or Equivalent in Havells / Siemens .

M&l for Repairs/ servicing to DG set of capacity 100/125 KVA with and including replacement of the worn out spares,serviceing of dynamo, FIP pump,coolingsystem, panel board setting if reqd and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as per recommended grade & quality and testing for smooth running at rated speed complete all as per manufacturer’s specification and as directed of the following spares to be replaced after a period of 250 hours run.( parts must be replaced with same part as obtained in credit)installed at SP No 2 ,STP :- i.e. i) Spin –on filter for lub oil(Cat Pt No. 0643601000) ii) K- oil super ( Cat pat 8203010020) iii) Primery Insert ( Part No : 3H13201000) iv) Secondary Element ( Part No : 3H13202000)

All as per item No 65.00 hereinbefore but for 50/63 KVA capacity DG set at SP No 3& 10, i.e. i) Spin –on filter for lub oil(Cat Pt No. 0643601000) ii) K- oil super ( Cat pat 8203010013) iii) Primery Insert ( Part No : 3H13201000) iv) Secondary Element ( Part No : 3H13202000)

All as per item No 65.00 hereinbefore but for 30 KVA capacity DG set at SP No 6A & 14,i.e. i) Spin –on filter for lub oil(Cat Pt No. 0643601000) ii) K- oil super ( Cat pat 820301005) iii) Primery Insert ( Part No : 3H13201000) iv) Secondary Element ( Part No : 3H13202000)

All as per item No 65.00 hereinbefore but for 25 KVA capacity DG set at SP No 6,6B &12 i.e. (i) Spin –on filter for lub oil(Cat Pt No. 0643601000) (ii) K- oil super ( Cat pat 820301007) iii) 0.5 Ltr Fuel Filter Kit ( Part No : 0392242000)

Supply & Fixing LED tube light fitting 18 Watts,4 feet long decorative ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.Cat No LHEXBQP5IN1W018 Make Havells

M&L for cleaning of Clarifiers at STP with opening of choked/jammed suction/delivery all lines of sewage pump in sump well ( size upto 12 mtr Rad and 10 mtr depth max) fitted With Bridge Platform, Sludge Extract Plate, Sludge Collet Hopper & Sludge Removal Arms by rodding , air presure or other mechanical means for removing of setteled down sludge at the bottom of sump well and made the line severiciable all as directed. Note :- Any other work reqd for cleaning the choked lines/removal of sludge includes elctrician work, plumbing works or mechanical means reqd if any is deemed to be included in quoated rate

M&L for cleaning of Sump Well with opening of choked/jammed suction/delivery all lines of sewage pump in sump well ( size upto 10 mtr dia and 10 mtr depth max) fitted with submersible sewage pumpset of capacity upto 60 HP by rodding , air presure or other mechanical means for removing of setteled down sludge at the bottom of sump well and made the line severiciable all as directed. Note :- Any other work reqd for cleaning the choked lines/removal of sludge includes elctrician work, plumbing works or mechanical means reqd if any is deemed to be included in quoated rate

Shifting of Motor coupled Centrifugal Pumpset of any Capacity into Sumpwell including Machining, Forming, welding works alongwith its Dismantling, removing cable connection, Lowering, Reassembling, cable jointing and testing all as specified and directed.

Dismantling of defective sluice valve of size upto 200 mm dia (any Make) after providing dead plate/plug on the existing pipe line for repair/replacement of unserviceable part in defective sluice valve with and including remetalling, rethreading of existing defective spindle, remetalling/gland clamp to its true size and replacement of spindle nut and collaring , greasing, oiling/ loath work if any or replacement of nut and bolts complete for making it smooth functional including refixing the same at its initial stage after necessary repair/replacement by removing dead plate/plug complete all as specified and directed.

Supply and fix in repair for cast iron sluice valve suitable for 150mm bore CI pipe flanged type, class PN-1 with brass spindle both ends flanged conforming to IS 14846 , including jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers complete all as specified and directed . Make Kirlosakar/leader/ Kartar/BIR

Dismatling of Non Return valve R/Flap FL both ends flanged of 250/200 mm bore for repair/replacement of unserviceable part in defective NRV jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers complete all as specified and directed.

Dismatling of Non Return valve R/Flap FL both ends flanged of 150/127 mm bore for repair/replacement of unserviceable part in defective NRV jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers complete all as specified and directed.

Dismatling of Non Return valve R/Flap FL both ends flanged of100/80 mm bore for repair/replacement of unserviceable part in defective NRV jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers complete all as specified and directed.

S&F in repair Non Return valve R/Flap FL duly ISI marked and both ends flanged of 200 mm bore, conforming to BIS 5312 including jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers complete all as specified and directed fixed in repair complete. Make Kirlosakar/leader/ Kartar/BIR

S&F in repair Non Return valve R/Flap FL duly ISI marked and both ends flanged of 150/127 mm bore, conforming to BIS 5312 including jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers complete all as specified and directed fixed in repair complete. Make Kirlosakar/leader/ Kartar/BIR

S&F in repair Non Return valve R/Flap FL duly ISI marked and both ends flanged of 100 mm bore, conforming to BIS 5312 including jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers complete all as specified and directed . Make Kirlosakar/leader/ Kartar/BIR

Maintenance/repair at LT Control panel including cleaning in side the panel,rewiring complete with copper wire of existing/reqd size complete, tightening of all connection complete of internal wiring (Power & Auxillary) with CP Nut bolts & securing of wiring/cables in PVC Conduit as per site requirement including welding/frame work reqd if any for making the LT panel board fully funtional all as specified and directed. installed at pump house for centrifugal pump set/ Submersible pump set at different places in the area and replacement of spare parts as required during maintenance (Spare part will be measured and paid seperately under relevent item) complete upto 50 HP motor pump set.

Taking out DI/CI line for repair & cleaning of pipe 150/100 mm dia CI Class"B" both ends flanged and fixing with MS Nut bolts and rubber insertion sheet 3 mm thick of 150 mm dia complete all as specified and directed.

M & L in repair suction/delivery pipe 150/127 mm dia CI Class"B" both ends flanged and fixing with MS Nut bolts and rubber insertion sheet 3 mm thick of 150 mm dia complete all as specified and directed.

M & L in repair suction/delivery pipe 100/80mm dia CI Class "B" both ends flanged and fixing with MS Nut bolts and rubber insertion sheet 3 mm thick of 100 mm dia complete all as specified and directed.

M&L in repalcement of rusted/unserviceable MS clamp of suitable size with nut,bolts & vashers complete for hanging of submersible pump set with column pipes in bore well any size/cap all as directed by Engr-in Chrge

M & L for Cast iron specials, ISI marked such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces ( single branch."Y" junction, double branch) straight connecting pieces cross(all flanged end upto 300 mm bore complete all as specified and directed.

Supplying only Sewage PVC Flexible Hose pipe(soond pipe) 100mm/80 mm all as per specified and directed.

S&F in repair lead acid battery capacity of 200 AH, 12 volts for DG sets installed on pump house

S&F Electric Shock & it's Management/ Fire order/ SOP Chart (Star HD Flex) showing the Effects, Management, Precautions against electric shock of dimension (90cm×60cm) fixed on Iron square bar Frame (90cm×56cm×2cm) welded together at each end screwed with 2 Hooks for fixing on the wall

All as per item No 89 here-in-before but History of Plant and Machinery Chart (Star HD Flex) showing description of 3 phase motor coupled Pumpsets and Generators wherever installed all as directed by Engineer-in-Charge

Material and labour for removing old paint by paint removers and painting to existing surface of motor and pump Sets of capacity 5 to 40 HP by using spray gun with one coat of red oxide and two coat of synthetic enamel paints as per colour code as mentioned below of make Burger/Asian/Nerolac of first quality ,all as specified and directed by Engr-in-Charge. (i) Motor colour - Dark Grey (ii) Pump colour - Blue (iii) Coupling - Orange

Material and labour for removing old paint by paint removers and painting to existing outer & inner surcface of LT Control Panel of any size by using spray gun with one coat of red oxide and two coat of synthetic enamel paints as per colour code as mentioned below of make Burger/Asian/Nerolac of first quality , all as specified and directed by Engr-in-Charge. (i) LT Control Panel (Outer & Inner Surface) - Dark Grey

M&L cross arms, bracing, supports, clamps and back plates fabricated from structural steel/CI sections including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape of size as directed inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and as directed.

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)

Guru Kirpa Trading Company

M/s Bansi Lal

M/S Yashpaul Gulati

M/s Mukand Lal Khanna

M/s Surjit Singh and bros

manoj and company