Certain Repairs/Maint works for shed located at RSSD and old traffic area including welcome maint at Fort cant Under GE East Allahabad.

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded in any mortar, complete all as specified and directed.

Granite, 18-20mm thick, (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.

Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc, complete all as specified and directed.

Stainless steel drapery rod, powder coated inner dia 30mm, for door and windows, fancy type including curtain rings, brackets, fancy type funnial and fixed to wall, complete all as specified and directed.

Cast in situ 12 mm thick Plaster of Paris false ceiling with GI frame work including all necessary drilling, cutting to fix electric items and making grid or designed ceiling, moulded edge complete all as specified and directed with following :- (a) GI Grid channel 30mm x 25mm x 20mm of guage fixed with rawl plug and screw 450mm c/c alongwith perimeter walls. (b) GI Channel made of shape 50mm x 40mm x 40mm of 24 guage placed @ 600mm centre to centre from perimeter at wall except long wall (in one span). (c) GI intermediate runners of size 45mm x 10mm x 10mm of 24 guage fixed 1200mm centre to centre leaving frame of one side wall except long wall. (d) GI 20mm grid wire mesh 20mm gauge suspended fixed with steel fasttner to recieve pop finishing as reinforcement of POP. (e) 12mm thick Plaster of Paris smooth finished as directed design and finished with 2 coats of acrylic emulsion paint any shade over a coat of primer, complete all as specified and directed.

Toughned glass, 10mm thick, as in hinged doors, partitions, automatic doors, railing and similar work including cutting to shape, drilling holes, moulding and fixed with screw, rubber beadings as required, fixed in repair, complete all as specified and directed.

Viterous china counter sunk oval shaped wash basin white colour of size 560 x 470 x 190mm, without tap but fixing to counter cut to existing platform and making good the edge smooth and rounding, fixed in repair, complete all as specified and directed.

Frame less rounded edge, 6mm thick, area n exc 1 Sqm each pane in any shape fancy type looking mirror fix to wall with CP screw and decorative bolt, complete all as specied and directed.

Anodized aluminium door frame with shutter of section size 62.5 mm x 44mm x 2.5mm thick, shutter with middle and bottom rail of aluminium section 112.5mm x 44mm x 2.5mm thick, and stiles and top rails of aluminium section 83mm x 44mm x 2.5mm thick with suitable locking arrangement with lock (Make: Godrej/ Link) 7 levers & self closing devices with rebates including joining cleats of suitable section for fixing builders hardware fittings, door spring and glazing with 5.5mm thick ordinary plain coloured glass including necessary fittings, fixtures and snap beadsand ornamental door handle, hydraulic door closer, etc, complete all as specified and directed.

Powder coated aluminium ventilator top hung type with partly blind glazed and partly gauged without sash bar with stile and rail of size 45mm x 45mm x 1.8 mm thick including 4mm glass and necessary glazing clip, rubber packing with and including fittings Aluminium Tower bolt 200mm - 01 Nos and Aluminum stay- 01 No. complete all as specified and directed.

Poder coated Aluminum window (side hung type shutter i.e. glazed and gauged) with aluminium anodised frame of aluminum section 62.5 x 37 x 1.5 mm thick with shutters having styles & rails of aluminum section 47.62 x 44.45 x 1.5 mm thick including jointing cleats, glazing clips, rubber packing, aluminum snap beading, screws anodized aluminum fittings such as hinges, tower bolts, handles etc including 5.5 mm thick ordinary plain glass, aluminium designer grill and stainless steel wire cloth 0.36mm dia and size of aperture 1.40mm, complete all as specified and directed.

Powder coated aluminium window shutter sliding type with 3 track (one shutter with aluminium jallie sliding type and two shutters with glass pan) without sash bar with style and rail of size 45mm x 45mm x 1.8mm thick including 4mm glass and necessary, glazing clip, rubber packing with and including fittings, (including necessary maruti locking arrangement) complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing including necessary fixing arrangements as per specification and drawings complete all as specified and directed.

Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, supplying & fixing in opening as per specification & drawing including necessary fixing arrangements as per specification and drawings complete all as specified and directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm and resistance to spread of flame of Class A category with property of being termite/ borer proof, water /moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately.

Factory made solid panel PVC glazed/ gauged door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. supply & fixing in the frame at site as per specification and drawing, complete all as specified and directed.

Hand shower chromium plated (health faucet) with 8 mm dia and 1.2 m long flexible tube with wall hook with NRV (back flow prevention), complete all as specified and directed. Make: Jaquar, CERA, Prayag

Soap dish, fancy type, CP, fixed in repair, complete all as specified and directed. MAKE:- Jaquar Cat No. 1131N techno-commercially equivalent model in Prayag or Cera.

Toilet paper holder with stainless steel flap fixed to wall etc, fixed in repair, complete all as specified and directed. MAKE:- Jaquar Cat No. CAN-1153S or techno-commercially equivalent model in Prayag or Cera.

PVC connection 15mm dia and 45 cm long with PTMT nuts with washers, complete all as specified and directed.

PVC connection 15mm dia and 45 cm long with brass nuts at both ends with washers, complete all as specified and directed.

CP grating, 100mm dia, fixed with coloured cement, joint to match the existing surface of tile, fixed in repair, complete all as specified and directed.

Wall mixer with provision of overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges fixed to 15mm bore GI pipe, complete all as specified and directed. Make: Jaquar Cat Part No- FLR 5273 UPR or techno-commercially equivalent model in Prayag or Cera.

Chromium plated brass shower rose, 125mm dia, with swivel joints fixing to steel pipe or union of 15 mm dia pipe, fixed in repair, complete all as specified and directed. Make: Jaquar, CERA, Prayag.

Bib taps (fancy type), cast copper alloy, long body chromium plated with crutch or butterfly hnadle, screwed down, screwed for iron pipe or for brass ferrule and fixed, 15mm bore, complete all as specified and directed.

Waste coupling of PTMT (half or full threaded), 32 mm dia, complete all as specified and directed.

E-board Make: Everest, Design "Lake and Hill" of size 605 x 605 x 4mm thick white prelaminated set embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section (White powder coated). The framework shall comprise of main runner made from 0.33mm thick GS sheet and of size 24 x 32x 300mm and soaced at 1200mm maximum centres securely fixed to structural soffits with hangers of 2mm dia GI wire to be fixed with approved rawl plugs, adjusters and screws. Flush fitting of 1200mmm long cross Tee (with double stiching) to be interlocked between main runners at 600mm centre to form 1200 x 1600 mm modules cross tee longer than 600mm to be supported independently. 600 x 600mm doubles to be formed by fittings 600mm long cross tee centrally between the 1200mm cross tee. Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19 x 19 mm and 300mm long of white colour all as per manufacturers instructions, fixed in repair, complete all as specified and directed. Make of frame work: Armstrong or equivalent.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Vitrified exterior coloured flooring tiles of 300 x 300 mm size, laid in floors with cement based adhesives, set and jointed as per manufacturer's instructions over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. Make: Orient Bell Ltd Cat Part No Checkers Teracotta (16513) or equivalent

Vitrified Ceramic tiles 9-10 mm thick, in light shade, area of each tile exceeding 0.42 sqm but not exceeding 1.0 sqm, as in floors/ walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Vitrified Ceramic tiles 9-10 mm thick, in coloured shade, area of each tile exceeding 0.42 sqm but not exceeding 1.0 sqm, as in skirting/ dado, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

Towel rack 600mm long, CP, with bottom hook, fixed in repair, complete all as specified and directed. Make: Jaquar Cat Part No: CAN-1181FHN or techno-commercially equivalent model in Prayag or Cera.

Fabrication only of modular kitchen with cabinet/ shelves & wardrobe/ cupboard made out of 18mm thick solid board with solvent adhesive at external faces including providing cabinet for keeping basket/ cutlery basket with handles/ door shutters all as specified and directed. Note : PVC solid sheet and fitting accessories shall measured and paid separately.

Supply only 18mm thick solid prelaminated one side prelaminated and one side plain (any shade) PVC sheet (celuka sheet) suitable for kitchen cabinet and modular kitchen racks complete all as specified and directed. Make: Rajshri plastiwood/ SYNTEX or commercially equivalent make in as approved by GE.

Supply only Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap 30mm, complete all as specified and directed.

Supply only Brass handle cast type, 125 mm size fixed with screw, complete all as specified and directed.

Supply only Ball catcher with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed.

Floor door stopper of brass body and tongue with hard drawn steel spring of cover plate length of 140 mm size, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, including cutting of reinforcement as required to facilitate demolition, complete all as specified and directed.

RCC 1:2:4 type B-1, using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. Note: Reinforcement shall be measured and paid separately.

TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Formwork to flat rough finished surface of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping), complete all as specified and directed.

PVC (SWR) gully trap 125/ 110 mm, setting and jointing with solvent cement, fixed in repair, complete all as specified and directed.

Dismantling of AC sheet corrugated or semi corrugated including ridges as in roof or wall etc covering complete all as specified and directed.

Asbestos cement corrugated or semi-corrugated sheet, 6 mm thick, fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as specified and directed.

Asbestos cement corrugated or semi-corrugated sheet, 6 mm thick, fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as specified and directed. [Expect sheet]

Asbestos cement two piece adjustable plain wing ridge, 6mm thick, fixed with ‘L’ type or ‘J’ type or cranked hook bolts, including taking down existing unserviceable ridge, complete all as specified and directed.

Fibre glass reinforced translucent corrugated sheeting 2mm thick, with two corrugations side lap fixed with coach screw and washer in roof, wall etc, complete all as specified and directed.

Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa, as in roof covering / cladding to wall fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as speified and directed .

Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa, as in roof covering / cladding to wall fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as speified and directed .

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Galvanised, corrugated mild steel sheeting, 0.63mm thick, with two corrugations side lap, fixed with ‘L’ type or ‘J’ type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed.

Galvanised, plain mild steel sheeting, 0.63mm thick, in ridges, hips, valley gutters, drip and straight flshings (length and girth as fixed), with grade of zinc coating 275, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Mild steel work in tubular trusses, purlins, rafter, vertical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240, complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed.

Dismantling timber scantlings, as in framed work, 40sq. cm and over in section, in any position, complete all as specified and directed.

Second class hard wood timber scantling clean swan fixed as girder, lintels, wall plates, joist, purlin rafters, complete all as specified and directed.

Preparation of new steel and iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint (camouflage colour shade) over a coat of red oxide primer, complete all as specified and directed.

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

Brickwork with sub class B brick, straight or curved on plan exceeding 6metre mean radius, built in CM 1:4, complete all as specified and directed.

Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water including removing of all rubbish off from the site, complete all as specified and directed.

Rendering 15mm thick in CM 1:4, mixed with water proofing compound @ 2% weight of cement, on fair faces of brick work or concrete surfaces of walls, finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

Preparation of new plastered surfaces of walls and applying two coats of cement base paint of approved colour over a coat of 1mm thick wall care putty, complete all as specifed and directed.

Rendering 10mm thick in CM 1:6 on brick work or concrete surfaces of walls, finishing the surface even and fair, complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of walls and applying two coats of acrylic emulsion paint, complete all as specifed and directed.

Kitchen sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35mm x 35mm x 5mm and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, in repair, complete all as specified and directed.

First class hardwood wooden Beads, 19mm width, straight (any size) for glazed or gauzed joinery, partical boards, renewed, including mitres etc. and removing old beads to store, complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed.

Plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate), 75mm thick as in plinth protection, finsihed even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metre and at every change of direction and filling the same with and including provision of bitumen and sand mixture at 1:3 proportion, complete all as specified and directed.

Steel windows factory made with side hung shutters including box type hinges with steel handle, and steel peg stay, with glazing bars dovetailed or welded including two coat of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces, fixed in repair, complete all as specified and directed. Note:- Red oxide primer have been cattered by factory.

Steel windows factory made with side hung shutters including box type hinges with steel handle, and steel peg stay, without glazing bars dovetailed or welded including two coat of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces, fixed in repair, complete all as specified and directed. Note:- Red oxide primer have been cattered by factory.

Vitrified homogenous tiles (light shade) 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm each (minimum size of tile 600mm x 600mm), in vertical surfaces such as skirting, dados, riser to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 10mm thick bedding in CM 1:4, complete all as specified and directed.

Vitrified homogenous tiles (light shade) 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm each (minimum size of tile 600mm x 600mm), in floors. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

Plain cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate), 25mm thick, as in sub base, including finishing the surface rough to receive top layer, , complete all as specified and directed.

Non - skid Ceramic, jointless coloured tiles 7 to 8 mm thick, size of each tile shall be 300mm x 300mm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

Non - skid Ceramic, jointless coloured tiles 7 to 8 mm thick, size of each tile shall be 400mm x 400mm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

Glazed ceramic coloured tiles as in vertical surface of walls such as skirting / dado and risers to steps, size of tile shall be 350mm x 250mm x 7mm / 450 x 300 x 7 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles, laid over and including provison of 10 mm thick rendering as in backing coat of tiles in cement mortar 1:4, complete all as specified and directed.

Block board 18/19 mm thick, interior grade, commercial type, fixed with screws to timber frame work, fixed in repair, complete all as specified and directed.

Machine cut mirror polished Kota stone slab 18-20mm thick, as in landing, stpes, flooring over and including 20 mm thick screed bed in cement mortar 1:6, laid and jointed in grey cement slurry mixed with pigment to match slab including rubbing and polishing mirror finish, complete all as specified and directed.

Machine cut mirror polished kota stone 18 to 20 mm thick over 10 mm thick bedding layer CM (1:4) in riser of steps, skirting, pillar etc laid and jointed in grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5sq.m each with shutters (without taking off shutters from the frames) including removing from site, complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification, complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section and fixed, 150mm long, complete all as specified and directed.

Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100mm long, complete all as specified and directed.

Aluminium alloy handles, cast type, anodised, 125mm long, complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250mm long, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame (with and including punching or drilling out old glazing pins/spring clips and providing and fixing new ones) or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

Sheet glass, 3mm thick, ordinary quality and glazing in squares not exceeding 0.5 sq. m in each pane with oil putty, complete all as specified and directed.

Figured glass, 4mm thick, pin headed type and glazing in squares not exceeding 0.5 sq. m in each pane with oil putty, complete all as specified and directed.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specifed and direcetd.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed in repair, complete all as specifed and direcetd.

Preparation of new wooden surfaces exc 10 cm width or girth with sand or emery paper & applying two coats of synthetic enamel paint over a coat of pink primer , complete all as specified and directed.

Preparation of new steel and iron surfaces (window) over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. Note: Red oxide primer shall be cattered in steel window item.

Plastic seat & cover for pedestal pan, black/ white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

PVC coating mild steel tubing of 25 mm dia with PVC coating for curtain rod fancy type including fancy type PVC rings decorative holder and brackets (wall to wall or flush to wall) for securing to curtain rod, fixed in repair, complete all as specified and directed.

Tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges, fixed in repair, complete all as specified and directed.

Angle valves two-in-one, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, screwed both ends for iron pipe or for unions 15 mm bore, in repair, complete all as specified and directed.

Bib taps (fancy type), cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed, 15mm bore, fixed in repairs, complete all as specified and directed.

PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, fixed in repair, complete all as specified and directed.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), including provision of cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe, 'P' or 'S' trap 100mm bore of pipe, fixed in repair, complete all as specified and directed.

Vitreous China wash down water closet pan (pedestal pattern) , white (excluding flushing cistern and flushing pipe), white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device, PVC (SWR) 'P' or 'S' trap and connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc., complete all as specified and directed. NOTE:- Plastic seat cover shall be measured as Supply only under respective item of this Schedule.

Supply only plastic seat cover for water closet, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

Vitreous China wash hand basin white flat back of size 550 mm x 400mm fixed on cantilever brackets of mild steel angle 35 x 35 x 5mm, 32mm dia brass waste coupling, 32mm dia PVC waste pipe rigid quality and PVC connections 15mm bore 450mm long of PTMT, including fixing of taps, fixed in repairs, complete all as specified and directed. Note: Pillar tap/ mixture shall be measured and paid separately as supply only item.

Supply only pillar taps, fancy type, cast copper alloy with capstan head chromium plated fancy type screwed down high pressure with or without lettered 'HOT' or 'COLD' letter with long screwed shank and fly nuts, screwed for iron pipe 15mm bore pipe, complete all as specified and directed.

Taking up or down 15mm bore, steel tubing and connections, , including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore, steel tubing and connections, , including cleaning for refixing or removal to store, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 15mm bore of pipe, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20mm bore of pipe, complete all as specified and directed.

Rotational moulded HDPE water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (minimum weight 210gms), in repair, complete all as specified and directed.

Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore, fixed in repair, complete all as specified and directed.

Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (minimum weight 210gms), fixed in repair, complete all as specified and directed.

PVC (SWR) 75 mm bore pipes single socketed ends, in any length with rubber gasket cup washing, fixed on walls, in repair, complete all as specified and directed..

PVC (SWR) 110 mm bore pipes single socketed ends, in any length with rubber gasket cup washing, fixed on walls, in repair, complete all as specified and directed..

PVC (SWR) bends, fixed to pipes in walls making good with CM 1:4 or PCC 1:2:4, fixed in repairs, complete all as specified and directed.

Preparation of old decorated plastered surfaces of wall including cornices, pilastered etc, by brooming down or steel wire brushing scrapping down smoke soot moulds , moss and efflorescent salts and trading oil and greasy sports and applying two coats of white wash on wall surface including wasing of floor, cleaning of glass, joinery, electrical fittings etc of drops & splash complete all as specified and directed.

Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty and applying a uniform layer of 1mm thick wall care putty (Make:- JK/Birla) including preparation of surfaces by rubbing with appropriate size of sand paper and applying two coats of acrylic emulsion paint (approved colour/shade) complete all as specified and directed.

Preparation of old decorated plastered surfaces of wall including cornices,pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint (approved colour/ shade) on wall surface including washing of floor, cleaning of glass , joinery,electrical fittings,wires etc. of drops & splash complete all as specified and directed.

Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of white colour / approved colour, complete all as specified and directed.

Preparation of old decorated plastered surfaces of wall including cornices, pilastered etc, by brooming down or steel wire brushing scrapping down smoke soot moulds , moss and efflorescent salts and trading oil and greasy sports and applying one coat acrylic emulsion paint (approved clour/shade) on wall surface including washing of floor, cleaning of glass, joinery, electrical fittings etc of drops & splash complete all as specified and directed.

Preparation of old decorated plastered surfaces of ceiling including cornices, pilastered etc, by brooming down or steel wire brushing scrapping down smoke soot moulds , moss and efflorescent salts and trading oil and greasy sports and applying one coat of white wash on ceiling surface including wasing of floor, cleaning of glass, joinery, electrical fittings etc of drops & splash complete all as specified and directed.

Preparation of old decorated plastered surfaces of ceiling including cornices, pilastered etc, by brooming down or steel wire brushing scrapping down smoke soot moulds , moss and efflorescent salts and trading oil and greasy sports and applying two coats of acrylic emulsion paint over a coat of primer on ceiling surface, complete all as specified and directed.

Preparation of old plastererd surfaces including filling depressions of scrapped surfaces with wall care putty and applying a uniform layer of 1mm thick wall care putty (Make:- JK/Birla) including preparation of surfaces by rubbing with appropriate size of sand paper and applying two coats of weather coat paint (approved colour/shade) over a coat of ready made cement primer, complete all as specified and directed.

Finishing walls with textured exterior paint of required shade: new work (two or more coats applied @ 3.28 ltr/ 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm, complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4.0 Sqm each with shutter (without taking off shutters from the frames), complete all as specified and directed.

Plain solid straight chowhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint of 2nd class hard wood (sal), complete all as specified and directed.

Flush shutters 35 mm thick, factory made, kiln seasoned and ASCU treated solid core construction, with block board core and ply wood face panels, commercial type on both sides, complete all as specified and directed.

Second class hardwood glazed and skeleton door shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars),divided into square with plain chamfered or rounded, metered edges of framing plain, chamfered or rounded,fitted with cut and mitred beads for securing glass, etc. are provided with stiles and rails as specified in SSR Part-I, section 8 clause 8.24 (a), complete all as specifed and directed.

M/s Rahul Kumar Agrawal

M/S A P CONSTRUCTION

ms shanti sons

shirdi sai builders

shweta constructions

M/S ATUL CONSTRUCTION

M/S Garg Sons

Airways Enterprises

creative construction co.