CAMOUFLAGE PAINTING TO VARIOUS BLDGS OF EXPLOSIVE AREA OF NAD TROMBAY UNDER GE (NW) MANKHURD

Amount

Taking down cement or cement lime plaster of any description on brick or stone walls, including raking out joints, hacking for keys, scrubbing down with water, etc. including all necessary scaffolding as required and taking off rubbish outside MD land, etc. complete all as specified and as directed.

M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces using CM 1:6, finished the surface even and smooth without using extra cement all as specified and as directed.

M & L Rendering 5 mm thick on fair faces of concrete surfaces using CM 1:3, finished the surface even and smooth without using extra cement as in ceiling all as specified and as directed.

M & L Rendering 20 mm thick in two layers (15 + 5 mm) on fair faces of brick work or concrete surfaces using CM 1:4, finished the surface even and smooth all as specified and as directed. Note : WPC shall be measured separately

Supply only integral water proofing compound etc. complete all as specified and as directed.

Chipping, removing carefully loose/damaged concrete incl plastering (total thickness up to 60mm ) from RCC surfaces of columns, beams,Chajas, soffits of slabs etc by low impact Hammer/Breaker without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land, complete all as specified and directed. Note: Hard concrete shall not be removed by force.

M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hour between the coats, complete all as specified and directed. Note :- Mode of measurement: superficial area covered between the end to end reinforcement bars (i.e., concrete area excluding all side covers) will be measured.

M&L for Anticorrosive Treatment to Reinforcement using IPNET-RB of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed. Note :- Mode of measurement: superficial area covered between the end to end reinforcement bars (i.e., concrete area excluding all side covers) will be measured.

M&L for providing TMT bars any dia in various structural RCC elements like columns, beams, Slabs etc. including cutting, bending, fixing of bars with welding/ tying as required at site with & including binding wires etc. and all relevant works like anchoring of the bars in the existing RCC Members, complete all as specified and directed.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit, up to 20mm thickness while the bonding agent is still sticking, including leveling, profiling etc, complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit while the bonding agent is still sticking, exceeding 20mm thickness and not exceeding 40mm thickness in two layers, each layer not exceeding 20mm, including leveling, profiling etc, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified.

M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper with roller over and including one coat of primer, complete all as specified and directed.

M&L for preparation of surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on new surfaces over and including minimum 1 mm thick white cement based wall care putty as a leveling course for obtaining plain surface etc complete all as specified and directed. Note: The percentage of colours in Camouflaging pattern shall be as under :- Olive Green - 50%, Dark Brown - 25%, Dark Stone/Leaf Brown - 25%

M&L for preparation of old surfaces and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm etc complete all as specified and directed. Note: The percentage of colours in Camouflaging pattern shall be as under :- Olive Green - 50%, Dark Brown - 25%, Dark Stone/Leaf Brown - 25%

M & L for complete removal of existing treatment and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over & including priming coat of extreior primer applied @ 0.90 litre/10 sqm over old surfaces etc complete all as speicified and directed Note: The percentage of colours in Camouflaging pattern shall be as under :- Olive Green - 50%, Dark Brown - 25%, Dark Stone/Leaf Brown - 25%

M & L Preparation of old plastered or un-plastered surface of wall and applying one coat of white wash complete all as specified and as directed

All as per ser Item No 18.000 above but on ceiling.

M & L for washing rubbing down & stopping of distempered & painted surfaces of walls, preparation of surfaces & applying one coat of oil bound distemper complete all as specified & directed

M&L complete removal of existing treatment and preparation of surface of wall and applying two coat of distemper oil-emulsion, of white or tinted over & including 3 mm thick (minimum) white cement based wall care putty in two coats complete all as specified and directed.

M& L preparation of old painted wooden surface of any description not other wise described , over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M& L preparation of old painted steel surface of any description not other wise described , over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M& L preparation of old painted steel surface of any description not other wise described , over 10cm width or girth and applying one coat of aluminium paint complete all as specified and as directed.

M& L preparation of old painted plastered surfaces on walls and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for filling of cracks in existing old surfaces of wall, chajjas, beams, parapets etc after cutting the same to V shape approximate 10mm wide and up to full depth of cracks with and including Chemistic crack seal caulking compound (Acrylic sealant) of M/s. Chemistik or equivalent of Dr. Fixit or of M/S STP Ltd as approved by the GE, also including necessary scaffoldings etc, complete all as specified and directed.

Removing plant/growth including its roots up to 1.00 metre of plant height at any location/at any storey and of any description and treating the surfaces with Acid (HCL) and making good surfaces with cement mortar 1:4, complete all as specified and directed.

bajaranga enterprises

Parmatma Enterprises

sahajanand const co.

SRINIVASA BUILDERS

M/s Mohd Altaf Hanif Qureshi

M/s Hari Om Construction