ADDN ALTN TO BLDG NO E 2 OF AE AND CERTAIN SPECIAL REPAIR WORKS UNDER GE (WEST) FEROZEPUR CANTT

Amount

Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil complete all as specified.

Excavating in trenches, n exc 1.5m wide & exc 1.5m but n exc 3.0m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil,compete all as specified.

Excavating in trenches, n exc 1.5m wide & exc 3.0m but n exc 4.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & n exc 1.5m in depth & getting out in soft/loose soilcompete all as specified.

Excavating in trenches, n exc 1.5m wide & exc 4.5m but n exc 6.00m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & n exc 1.5m in depth & getting out in soft/loose soilcompete all as specified.

Earth work in excavation for all kind of soil by mechanical means (Hydraulic excavator) means over areas including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge .

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas including getting out and disposal of excavated earth lead upto 50 m and lift exc 1.5 metre but not exceeding 3 metre, as directed by Engineer-incharge .

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas including getting out and disposal of excavated earth lead upto 50 m and lift exc 3 metre but not exceeding 4.5 metre, as directed by Engineer-incharge.

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas including getting out and disposal of excavated earth lead upto 50 m and lift exc 4.5 metre but not exceeding 6.00 metre, as directed by Engineer-incharge.

Returning, filling in, including spreading, leveling, watering and well ramming soft/loose soil in layers n. exc 25 cm thickness complete all as specified.and directed by Engineer-incharge.

Removing excavated soil n exc 50 m and depositing where directed at a level n exc 1.50 m above the starting point complete all as specified.and directed by Engineer-incharge.

Use and waste of timbering as planking and strutting for excavations in trenches,manhole in soil, including wales, struts, open poling boards, etc. as may be necessary and fixing and removal complete all as specified and directed by Engineer-incharge.

Demolition and breaking up salt glazed stoneware (SGSW) drain pipes set in cement mortar internal dia of pipe 200 mm.complete all as specified.and directed by Engineer-incharge.

Demolition and breaking up salt glazed stoneware (SGSW) drain pipes set in cement mortar internal dia of pipe 150 mm.complete all as specified.and directed by Engineer-incharge.

M & L cement concrete 1:3:6 type C2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid & tested for 250 mm bore pipe complete all as specified.and directed by Engineer-incharge.

All as per ser item No-14 here-in-before but for 150 mm bore pipe complete all as specified.and directed by Engineer-incharge.

M & L 250 mm dia reinforced concrete pipes,class NP2 laid and jointed complete with collars in trenches as specified

All as per ser item No-16 here-in-before but 150 mm bore pipe.complete all as specified.and directed by Engineer-incharge.

Cutting into existing manhole for connecting new drain, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC1:2:4 type B1, smooth finished and reforming benching as required for internal pipe of dia 200 mm complete all as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for & forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished and reforming branching as required for 150 mm dia pipes complete all as specified.and directed by Engineer-incharge.

Rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces,, surfaces finished even and smooth without using extra cement complete all as specified.

Demolition of PCC of any description and in any position as in not otherwise specifically provided for complete all as specified.and directed by Engineer-incharge.

Cement concrete (1:4:8) type D2 40mm graded agg in foundations, filling and mass concrete complete all as specified and directed

M&L for cement concrete type B2 1:2:4 (40mm graded aggregate) in surface channels and drains complete all as specified.and directed by Engineer-incharge.

Providing cement concrete 1:2:4 type B1 (20mm graded agg) in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, ier aps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces,including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified.

Demolition of brick work built in cement mortar of any specification and in any position complete all as specified.

Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

All as per item no. 26 here-in-before but using old bricks retrieved from item no 25 demolition including cleaning and removal of mortar from old bricks.

Demolition of reinforced cement concrete (reinforce-ment cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for and removing debris outside MD land complete all as specified.

M/L RCC 1:2:4 type B1 using 20mm graded aggregate as in Precast cover slab , shelves and similar articles and setting in mortarcomplete with joints to match complete all as specified

S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified.

Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor topping, 75 mm thick, complete all as specified.

Cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in floor topping, 100 mm thick, surface finished even and smooth without using extra cement complete all as specified.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified and directed.

S&F hydraulically extruded aluminium body door closer regulated designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg etc complete all as speciified and directed.

S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified

S& F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified

S& F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified

S & F 3.00mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

S & F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified

S &F in repair to 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm incl. incl hacking out old broken glass and putty/beading complete all as specified.

S &F in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified .

Taking down cement plaster inlcuding racking out joints, hacking for keys, scrubing down with water, complete all as specified and directed.

M&L 10 mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth with out using extra cement complete all as specified and directed.

M&L Rendering 5mm thick in cement mortar (1:3) on any face of brick walls or conrete surfaces, surfaces finished even and smooth without using extra cement, in ceiling, soffits of chajja or similar location etc complete all as specified & directred.

M & L preparing old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of pink primer all as specified.

M & L for Preparing old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

M&L Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified.

M&LPreparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified.

M&L White wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified.

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as specified and directed.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified.

M&L 10 mm thick screed bed or bedding layer of mortar in CM(1:4) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane. Note: WPC shall be measured and paid separately

Supply only water proofing compound.

M&L Tack coat of industrial bitumen 85/25 @ 1.20 Kilogram per square metre over a coat of bitumen primer @ 1.2 kg per square metre including preparation of roof surfaces complete all as specified and directed.

M&L For APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) Laid on primed surface by torced application including bitumen primer complete all as specified.→

M&L for 80mm thick average consolidated thickness, mud phuska on flat roofs including 25mm thick mud plaster and 3 mm thick leeping plasteris not plaster.

S & F 40 mm thick brick tiles laid on mud mortar and joints grouted flus in cement mortar(1:3) mixed with 5% of crude oil by wt of cement on mud phuska complete all as specified and directed.

All as item No 58 here in before but except tiles

M & L for Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in coping,benching , roof kerbs or mud stops, rounded or chamfered on edges including necessary form work complete all as specified.

M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide zink primer on steel surfaces complete all as specified.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 15mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) fixed complete all as specified.

S&F in repairs 15 mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F in repair PVC connection both end brass union and length 450 mm long for 15 mm bore pipe.

S&F in repair Bib tap of CP brass, 15mm bore, fancy type screwed down, screwed for iron pipe or for brass ferrule complete all as specified. .

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, as in repair complete all as specified.

S&F PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs. as fixed in repairs and all specified and directed.

S&F Health faucet (Jaquar model No: ALD-CHR-585)(ABS Body) with 8mm dia 1.00 m long easy flexible tube chormium coated finish and wall hook all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) 110 mm pipes single socketed in any lengthwith rubber/ ring Joints fixed to wll complete all as specified

S&F PVC (SWR) bends any Radius with 110 mm dia complete all as specified

M&L Providing precast cement concrete louvres and jallies, set in cement mortar (1.4) 12.5 mm thick aggrigate tpe B-0 25mm thick (measured solid), in?cluding all mould- ings but excluding frame Note: (Precast frame shall be measured and paid separately)

M&L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltrs/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.

M&L for glazed coloured ceramic tiles of size 350x250x7/450x350x7 mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35Grade including laying of sand cushioning, etc, complete all as specified and as directed. Note :- Sand will be measured and paid seperately

M&L sand filling under floors or in foundations including watering and consolidation

M&L 50 mm thick PCC, type B-1, 1:2:4 (20mm graded aggregate) as in plinth protection, surface finished even and smooth without using extra cement complete all as directed.

Taking down carefully copper /aluminium point wiring (light, fan, socket or power ) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M &L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

(b) One socket outlet on the same board controlled by one single pole one way switch

(c) One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

All as per Item No 83 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

Supply & Fixing Switch piano flush type single pole one way 5/6 Amp complete all as directed.

Supply & Fixing Switch piano flush type 15 amps, single pole one way duly ISI marked.

Supply & Fixing Socket outlet 2 in one, 5/6 Amps flush type ISI marked.

Supply & Fixing Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked.

Supply & Fixing ceiling rose, PVC/Polycarbonate,isolated three terminals.

Supply & Fixing Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb omplete all as specified and directed.

S&F LED tube light fitting 1 X18/20 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.

Supply & Fixing MCB, Single pole 240 V, 6 - 32 Amps 10 KA 'B' Series.

Supply & Fixing MCB, Single Pole and neutral 240 V, 32 Amps 10 KA 'B' series.

M & L for sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia ( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run)

M/S KRISHNA ENTERPRISES

Dee Kay EnterPrises

HARBHAJAN SINGH KHARBANDA

M/s Sarup Singh

M/s Surjit Singh and bros