NIT No. 29, Item No. 01 (2021-22)

S/I/T/C of Pump Sets with allied equipments for water hydrant, operated from water emergency at sarita vihar by carrying out the following works:- S/o. Sub. P/Set of High discharge of 15 HP with dynamically balanced motor, vibration free total enclosed motor fitted squirrel cage induction motor, water lubricated thrust bearing, fitted with S.S. impeller mounted on stainless steel shaft of following parameters having 2900 RPM, suitable to operate on 3 Phase 415 Volt 50 Hz, A.C. supply. Head in meters approx.- 20-29 mtr., Discharge in LPM – 1800-1500., No of stages- 02, Delivery size – 100 mm, Make- BS/SKOPE/GREAT INDIA/KIRLOSKAR/SU/Lubi/DJB Approved

S/o PVC insulated & PVC sheathed flat cable with plain copper conductor having 6 cores 6sq. mm size for submersible motor. (Each Drum of 500 mtrs) Note- Each drum contains 500 mtr continuous cable. Make:- Polycab/Havells/Grandley/Gloster/ DJB approved.

Laying of overhead cable from water emergency at pocket-J, JE(Civil)store to pump sets installed at pocket-J sarita vihar Reservoir at booster pumping station.

S/o of double flange G.I. column pipe 100 mm dia., medium class, each of 3mtrs Long duly threaded on both ends, welded & fitted with G.I. flange on both ends welded with three nos. support strip at each end between flange and pipe, with two slots for sub cable in each flange. Make of pipe: TATA/Jindal

S/o tail piece of the medium class G.I. pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of G.I. pipe 100 mm dia. Make of pipe: TATA/Jindal

S/o G.I. 90 degree x 100 mm dia. bend having flange at both ends (Heavy duty).

S/o M.S. clamp of 1500 mm length duly fabricated from 12.5 mm thick 75 mm wide M.S. plate for holding the pipe of 100 mm dia

Supply of MS full threaded Nut bolts off sizes as per site requirement.

Supply of Rubber packing for 100 mm dia. Flange( 3 mm thick)

Supply of Starter Oil .Make:- bentex/capital.

Supply CI D/F non return valve of size 100 mm dia.,as per IS 5312(part 1&2)PN 1.0 CI Body, Door/Bronze to Rubber rings/SS410 Hinge Pin Construction Make: IVC/Kirloskar

Supply CI D/F sluice valve of size 100 mm dia.,as per IS 5312(part 1&2)PN 1.0 CI Body, Door/Bronze to Rubber rings/SS410 Hinge Pin Construction Make: IVC/Kirloskar

Installation of submersible pump set by lowering of p/set in Sump with all allied above items.work also includes fixing/fitting of all above items such as G.I Pipe, bend, tail piece, clamp, rubber packing, nut bolts etc.This includes installation and grouting of panel board with all electrical wiring & cabling at site. All tools & tackles i/c tripod chain pulley blocks etc. shall be arranged by the firm. This includes testing & commissioning of t/well on load at site i/c cartage, loading & unloading of material. All required civil work included in the scope of work

Raj Engineering Co.

CHANDERA BUILDERS

MITTAL TRADING COMPANY