PROVN OF STORAGE SHED AT AF STN DADRI UNDER GE AF FARIDABAD

Amount

Sch 'A' Part I to VI are under Srl No. 2 to 8 Note: These schedules are pre-priced by MES. Rate to be quoted by contractor after verify and workout their own rates. Department shall not entertain any claim due to any variation in the estimate inserted by MES, if any.

Sch 'A' Section -I (Building Work) Construction of Storage accommodation (Ration Store) with permanent specification in framed structure with RCC M-25 grade design Mix concrete, brick wall in CM 1:6, RCC roof, Plinth Protection, flooring etc all as permanent specifications and shown in drawings (refer prepriced shedule attached seperately)

Lump sum price worked out by the contractor for SITE CLEARANCE AND EARTH WORK as listed in Sch 'A' Section-II (refer prepriced shedule attached seperately)

Lump sum price worked out by the contractor for COMPOUND WALL FENCING AND GATE as listed in Sch 'A' Section-III (refer prepriced shedule attached seperately)

Lump sum price worked out by the contractor for PATH WORK as listed in Sch 'A' Section-IV (refer prepriced shedule attached seperately)

Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORK as listed in Sch 'A' Section-V (refer prepriced shedule attached seperately)

Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORK as listed in Sch 'A' Section-VI (refer prepriced shedule attached seperately)

MISCELLANEOUS ITEMS under Sch 'A' Section-VII are not prepriced by MES and Rate to be quoted by contractor.

Taking out carefully existing serviceable LT UG cable from trench for rerouting as per site requirement to terminate for electrical distribution network of existing Bldg and new proposed bldgs. Note : Old serviceable cable should not be dammaged during taking out, if it dammaged the contractor shall wear the additional cost required for rectification as required on site.

Laying only LT UG cable obtained from item No 9.01 here in above.complete all as specified and directed by Engr-in-Charge.

M&L for street light bracket made of GI pipe Med grade of suitable dia to fix street light on pole with 02 Nos MS clamp 50x6 mm flat.complete all as specified and directed by Engr-in-Charge.

M&L for hot pressed moulded SMC boxes with hinged door fixing of size 230mm x 170mm x 105mm complete with suitable aluminium bus bar 4 Nos fixed in side the box on PVC insulator, MCB DP 6 Amp -01 No incl 02 Nos MS clamp made of 25x6 mm MS Flat, nuts, bolts etc suitable to fix on wall/ pole as required on site. Make: Sintex/ Hensel or equivalent model as directed by Engr-in-Charge

M&L for cable PVC insulated, sheathed for connection 2.50 Sqmm x 3 core Copper conductor duly drawn in concealed PVC conduit of 20 mm dia from DB to cut out junction box and upto street light fittings on wall/ poles as required on site incl PVC flexible pipecomplete all as specified and directed by Engr-in-Charge

M&L for boring of holes under road, pavement, motor hardstanding by trenchless technology using ultra sound technicque and necessary machine including HDPE pipe of 150 mm dia suitable foor 40 MPA working pressure. complete all as specified and directed by Engr-in-Charge

M&L for new generation energy saving and environment friendly long life LED 01 x 45 watt LED street light fitting with pressure die cast aluminium housing with high power LED as light source and lens embeded PC cover having top opening separate driver compartment with IP 65 protection and impact resistance of IK07 suitable for pole complete with all accesories including connected with twin core twisted flexible copper conductor wire of suitable size complete all as specified and directed by Engr-in-Charge.

S&F LED integrated batten tube light fitting 1x20W, 230 V, ultra bright with very high efficiency suited for installation G 13 lamp holder o give glare free light complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specfied and directed. Make C&S Cat Part No:LTTB4F20WLED/W or equivalent approved Makes as per Appx 'D' in Tender Documents.

M&L for ceiling fan 1400 mm sweep of Min BEE 3 star rating with all accesories and makig connection from connector to fan alongwith regulator connection. complete all as specified and directed by Engr-in-Charge

M&L for PVC Exhaust Fan with lovers of 300 mm sweep, 950 RPM, 230 volts, A/C of min BEE 3 star including making connection complete all as specified and directed by Engr-in-Charge

MCB SPN , 240 Volts 40 Amps current rating ‘C’ series, with rupturing capacity 10 KA complete all as specified and directed by Engr-in-Charge .

MCB SP, 240 Volts and 06 to 32 Amps current rating ‘C’ series, with rupturing capacity 10 KA complete all as specified and directed by Engr-in-Charge .

M & L for retrofit LED lamp energy saving Eco friendly complete set 9 Watt, 230 volts, B -22 Type complete all as specified and directed by Engr-in-Charge

M&L for new generation energy saving and environment friendly long life LED 01 x 30 watt LED street light fitting with pressure die cast aluminium housing with high power LED as light source and lens embeded PC cover having top opening separate driver compartment with IP 65 protection and impact resistance of IK07 suitable for pole complete with all accesories including connected with twin core twisted flexible copper conductor wire of suitable size complete all as specified and directed by Engr-in-Charge.

GARG CONSTRUCTION CO