Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi

BILL OF QUANTITIES

Sl. No. Area Item/ Description Unit Qty. Rate Total Amount

Sl. No. Area Item/ Description Unit Qty. Rate Total Amount

Providing and supplying student desk cum bench. The top of the desk shall be 25mm thick made up of Pre-laminated particle

board of grade II of IS 12823 with approved laminate and shade. To protect the wall from kicks, abrasion and serve as a decorative

moulding the front of the desk shall be covered with 25mm thick particle board. The edges of the board shall be sealed with 2mm

thick PVC edge banding. The desk shall be supported on CRCA rectangle shape pipe with cross-section area 80mm X 40mm with

2.5mm thick and table understructure shall have two nos. metal base leg made of CRCA elliptical shape pipe of 75x25x2.0 mm

thick and welded together and base plate shall be 10mm thick. A CRCA powder coated sheet frame 2.0 mm thick shall be provided

below the top for structural support. The seat shall be made up of metal insert moulded polyurethane foam having density 45Kg/m³

and covered with PP/ABS cover. The back shall be made up of 9 mm thick hot pressed plywood upholstered with high resilience

polyurethane foam having density 35Kg/m³. The seat and back shall be padded with leatherite tapestry with 1±0.2mm thick. The

seat shall have tip-up mechanism in which the seat shall be able to pull down for sitting on and return to an upright position. The

STUDENT DESK board shall be supported on CRCA rectangle pipe having size 80mm X 40mm X 2.5mm thick. The pipe frame shall be

1 WITH TIP-UP electrostatically coated with epoxy powder with 40-60µ thick. Size Desk height- 750mm +/- 10mm, Seat Height - 450mm +/-10mm , Each 832 21,377 1,77,85,903.7

SEAT( CUHIONED) Seat Size-450mm(W)x480mm(D), Back Size - 450mm(W)x450mm(H) Top Size- 350mm(W)x600mm(L)x25mm thick complete..

Providing and supplying executive table with an overall size 1200mm X 600mm X 750mm. The top shall be made up of 25mm thick

Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile shall be

in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board

panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. The understructure shall consist of

MS/CRCA rectangle pipe frame having cross-section area 40mm X 20mm with 1.2mm thick. Fixed top supporting pedestal shall be

supplied at both sides of the table. The pedestal shall be made up of 0.8mm thick high yield strength CRCA sheet of grade 'D'

confirming to IS:513 with wooden facia. It should have 3 nos. of drawer i.e. 2 box and 1 filing. It should be operated on ball bearing

sliding channel and Al die cast handle with centralized locking mechanism. The table shall be clad with modesty panel. It should be

1mm thick made up of CRCA sheet.There shall be leveller provided at the bottom. The board used should meet International

2 TABLE Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of Each 4 30,539 1,22,155.9

rupture and modulus of elasticity bending tested as per IS 2380 complete.

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor 1 of 30 NBCC India Ltd.

SINGH RAJPOOT RAJPOOT

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Providing and supplying medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made

of 15mm thick hot pressed plywood upholstered with high resiliance moulded polyurethane foam 40mm thick having density

40kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of metal bright bar upholstered with

breathable mesh and leatherite tapestry 0.8mm thick and 535GSM. The chair shall be supplied with polyurethane arm mounted on

metal pipe loop frame. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position

locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to

100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested

as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged MS/CRCA chrome plated having pitch circle Dia.

650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon 30% glass filled,

confirming to ANSI/BIFMA standard X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 470±10

mm(W) X 475±10 mm(D) and back size shall be 550±10 mm(H) from seat & overall height = 960±10 mm complete..

Supplying & placing cafeteria table with an overall size 1800mm X 900mm X 750mm. The top of the table shall be made up of Pre-

laminated particle board of grade II of IS 12823 with approved laminated. The top profile shall be in rectangle shape with round

corner and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly

pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supported on MS powder coated pipe

frame having size 40mm X 20mm with 1.6mm thick. The legs shall have the combination of MS powder coated and chrome plated.

The Joints shall be made by using TIG welding. There shall be adjustable leveler provided with metal insert at bottom to avoid

4 CAFÉ TABLE scratches on the floor complete. Each 33 27,180 8,96,929.9

Supplying & Placing of cafe chair. The complete structure shall be made up of 20% glass filled injection moulded polypropylene.

The frame structure shall be supported by four legs made up of polypropylene having Dia. 35mm at upper and 25mm at lower i.e

taper shape. The seat size shall be 410±10 mm(D) X 400±10 mm(W) and back size shall be 390±10 mm(W) X 420±10 mm(H)

from seat. Overall height shall be = 845±10 mm, overall depth = 510±10 mm complete.

5 CAFÉ CHAIR Each 264 3,563 9,40,600.7

Supplying and placing Single bed with an overall size W900XD2050X352H. Head and tail panel shall be made of 50mm X 25mm X

1.2 THK Crossection and 20mm X 20mm X 1.2 THK M.S Structure . The Mattress understructure shall consist of square hollow

section 20mm X 20mm X 1.2 THK M.S Structure. Head and Bottom shall be covered with 18mm thick Pre laminated particle

board with 2mm thick PVC edge banding . The edge banding shall be pasted with hot melt glue at 200 degree Celsius.Mattress

panel shall be made of 12 mm thick particle board.All metal part shall be powder coating finish with DFT(Dry Film Thickness) - 35µ

min. The PPCP shoes shall be insert into bottom of legs for avoid skretches on the floors complete.

Signature of Contractor 2 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Providing and placing students desk of overall size 900mm X 600mm X 1350mm. The table shall be supplied with 25mm thick pre-

laminated particle board, edges sealed with PVC edge banding. The table top shall be supported on MS pipe frame of

30X30x1.2mm. The complete support structure and the frame or the table shall be made up of MS pipe frame of 30x30x1.2mm.

The table shall be provided with bookshelf 1 feet above the table top supported on direct and cross beams made up of MS pipe

frame of 30x30x1.2mm. The overall dimensions of the bookshelf shall be 900mm X 300mm. The book shelf shall be made up of

18mm thick pre-laminated particle board, edges sealed with PVC edge banding. The MS supported frame shall be further extended

upto 150mm above the bookshelf with 18mm thick pre-laminated particle board placed on between the two sides of MS frame. The

7 Study table work shall be carried out as per guidance and instructions recieved from engineer incharge complete. Each 435 23,922 1,04,06,158.5

Providing and supplying visitor chair with ergonomic design for user comfort complete. The seat and back shall be made of 15mm

thick hot pressed commercial plywood padded with high resiliance moulded polyurethane foam 50mm thick having density 40kg/m³

in seat and 40mm thick having density 32Kg/m³ in back. The same shall be upholstered with fabric tapestry 1mm thick and 300

GSM. The backrest of the chair shall be made by keeping the natural curvature of the spine which helps to provide back support.

The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the the armrest shall be used

black integral polypropylene arm completely joint with seat. The frame structure shall be cantilever support type made up of

MS/CRCA powder coated round pipe of Dia 25.4mm with 2mm thick. There shall be co-polymer polypropylene shoe provided at the

base to avoid scratches on the floor. The seat size shall be 465±10 mm(W) X 460±10 mm(D) and back size shall be 480±10 (W) X

8 Study chair 520±10 mm(H) from seat & overall height = 960±10mm. Each 338 5,955 20,12,824.4

Providing, supplying and placing steel almirah in perfectly upright and straight position complete. The overall size of the almirah

shall be as per available size at site and maximum depth will be 450mm. The almirah should have two no. of doors providing two

seperate spaces to be accessed from two difference shutter sides of the almirah. It should be supplied with 4 nos. of adjustable

shelves i.e. 5 loading compartments on each side of the almirah to be used and accessed by two students, mainitaning proper

safety and security fo the essentials stored in the almirah.. Door shall be made of 1mm thick and all other components shall be

made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Stiffeners shall be provided in shelf & door.

The steel hinged door shall be provided with two dandelas and handles to b used by two different students. The almirah should

have provisioning for pad-locks fixing by students to carry and keep their own lock and key to use and operate the almirah with full

safety and security. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity.

Steel Almirah Uniformly distributed load capacity per each shelf shall be 40kg maximum. The complete steel structure shall be constructed by Sq.Mtr.

Customised welding and provide finishing with epoxy polyester powder coated to be thickness 40-60µ.

Signature of Contractor 3 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Providing, supplying and placing steel almirah in perfectly upright and straight position complete. The overall size of the almirah

shall be 900mm (W) X 450mm (D) X 1830mm (H) including legs. The almirah should have two no. of doors providing two seperate

spaces to be accessed from two difference shutter sides of the almirah. It should be supplied with 4 nos. of adjustable shelves i.e.

5 loading compartments on each side of the almirah to be used and accessed by two students, mainitaning proper safety and

security fo the essentials stored in the almirah.. Door shall be made of 1mm thick and all other components shall be made of

0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Stiffeners shall be provided in shelf & door. The

steel hinged door shall be provided with two dandelas and handles to b used by two different students. The almirah should have

provisioning for pad-locks fixing by students to carry and keep their own lock and key to use and operate the almirah with full safety

and security. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly

distributed load capacity per each shelf shall be 40kg maximum. The complete steel structure shall be constructed by welding and

10 Steel almirah provide finishing with epoxy polyester powder coated to be thickness 40-60µ. Each 97 28,503 27,64,795.9

Supplying & Placing workstation table in completely knock down conditions with an overall size 900mm X 600mm X 1050mm that is

to be assembled at site complete. The top shall have the size 900mm X 600mm made up of sharing base for workstation. 25mm

thick E1 grade PLPB table top having low VOC emission with matching edgebanding grade II of IS 12823 with one side laminate

and finish as per approved shade. The profile of the top shall be in rectangle shape with smooth radial corners as per EHS norms

for safety and the edges shall be sealed with 2mm thick strip of impermeable PVC that is cut to fit the size of board panel and duly

pasted using EVA / PUR Holt melt adhesive having low VOC emission with the assistance of edge banding machine at 200 degree

celsius. The workstation shall have desking based system with overall height 1050mm. Glass screen is made of 8 mm thick

sandwich glass of 1050mm(W) x 300mm(H) mounted on anodized brackets. Privacy screen to be provided between 2 user made

of 8 mm thick sandwich glass of 600 mm(W) x 300mm(H) mounted on anodized brackets MS Powder coated 40x30mm beams are

considered to support table top. The table understructure shall have Aluminum Powder coated SOLE series Trapezoid shape legs

(End Legs) with die cast connectors for weldfree joints + Mid legs: 30x60mm MS-Powder coated Legs. Sole series Trapezoid leg

11 Workstation having C-profile Slant Leg. Aluminum flapper with Soft closing shall be provided on top with size 350mm X 135 size or 500 x 135 Each 80 23,210 18,56,770.2

mm size as per site requirement. Horizontal Power Management shall be given under Aluminium flapper on metal cable tray, where

switch plate shall be mounted and vertical metal riser for vertical wire trucking. 1.2mm thk CRCA Powder coated wire tray with

switch plate and vertical cable risers are considered for wire management. Flapper box shall have several components for electric

and data (6amp/15amp 2 switch, 3 socket , Data LAN port along with complete wiring.

Providing and supplying medium back chair with ergonomic design, comfortable & aesthetically appealing complete. The seat shall

be made of 15mm thick hot pressed plywood upholstered with high resiliance moulded polyurethane foam 40mm thick having

density 40kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of metal bright bar upholstered with

breathable mesh and leatherite tapestry 0.8mm thick and 535GSM. The chair shall be supplied with polyurethane arm mounted on

metal pipe loop frame. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position

locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to

100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested

as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged MS/CRCA chrome plated having pitch circle Dia.

12 Workstation Chair 650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon 30% glass filled, Each 80 8,755 7,00,360.7

confirming to ANSI/BIFMA standard X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 470±10

mm(W) X 475±10 mm(D) and back size shall be 550±10 mm(H) from seat & overall height = 960±10 mm.

Signature of Contractor 4 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Supplying and placing Table with Overall size 1500mm X 750mm X 1650mm .Structure is made up of 25mm X 25mm X

1.6/2.0mm THK M.S Structure complete . Understructure AndLegs are made up of 50mm X 25mm X 1.2mm THK M.S tubes. All

metal part shall be powder coating finish with DFT(Dry Film Thickness) - 35µ min. The PPCP shoes shall be insert into bottom of

legs for avoid skretches on the floors. Top of the Table is made up of 25mm Pre-Lam Particle Board having Approved Laminate

shade. Back Modesty is made up of 18mm Pre-Lam Particle Board having Approved Laminate shade.with 2mm thick PVC edge

banding . The edge banding shall be pasted with hot melt glue at 200 degree Celsius. Table must be provided with complete

13 Table electrical fittings and wiring (8 swithes and socket with indicator, Moudular frame/plate for fitting, Single phase and Three phase Each 15 36,647 5,49,701.7

MCB and DC MCB).

Providing and supplying of wooden stool complete. The overall size of the stool shall be 400mm X 400mm X 600mm. The structure

shall be constructed out of solid wood. The top shall be made up of solid wood surface duly buffed for smoothening as well as

melamine polish to obtain shining finish. The top support / legs/ footrest shall be supported on solid wood baton/frame and 4 nos. of

legs. The entire struture shall be polished with melamine to obtain shining finish. There shall be buffers provided at the bottom to

14 Stool avoid scratches on the floor. Each 70 6,617 4,63,174.6

Providing and supplying executive table with an overall size 1200mm X 600mm X 750mm. The top shall be made up of 25mm thick

Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile shall be

in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board

panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. The understructure shall consist of

MS/CRCA rectangle pipe frame having cross-section area 40mm X 20mm with 1.2mm thick. Fixed top supporting pedestal shall be

supplied at both sides of the table. The pedestal shall be made up of 0.8mm thick high yield strength CRCA sheet of grade 'D'

Electrical confirming to IS:513 with wooden facia. It should have 3 nos. of drawer i.e. 2 box and 1 filing. It should be operated on ball bearing

Lab sliding channel and Al die cast handle with centralized locking mechanism. The table shall be clad with modesty panel. It should be

1mm thick made up of CRCA sheet.There shall be leveller provided at the bottom. The board used should meet International

15 Teacher table Each 1 30,539 30,539.0

Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of

rupture and modulus of elasticity bending tested as per IS 2380.

Providing and supplying medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made

of 15mm thick hot pressed plywood upholstered with high resiliance moulded polyurethane foam 40mm thick having density

40kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of metal bright bar upholstered with

breathable mesh and leatherite tapestry 0.8mm thick and 535GSM. The chair shall be supplied with polyurethane arm mounted on

metal pipe loop frame complete. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright

position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height

up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be

tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged MS/CRCA chrome plated having pitch

16 Teacher chair circle Dia. 650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon 30% Each 1 8,755 8,754.5

glass filled, confirming to ANSI/BIFMA standard X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be

470±10 mm(W) X 475±10 mm(D) and back size shall be 550±10 mm(H) from seat & overall height = 960±10 mm. .

Signature of Contractor 5 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Supplying and placing Study Table with Overall size 1500mm X 750mm X 1200mm . Structure is made up of 25mm X 25mm X

1.6/2.0mm THK M.S Structure complete. Understructure AndLegs are made up of 50mm X 25mm X 1.2mm THK M.S tubes. All

metal part shall be powder coating finish with DFT(Dry Film Thickness) - 35µ min. The PPCP shoes shall be insert into bottom of

legs for avoid skretches on the floors. Top of the Table is made up of 25mm Pre-Lam Particle Board having Approved Laminate

shade. Back Modesty is made up of 18mm Pre-Lam Particle Board having Approved Laminate shade.with 2mm thick PVC edge

banding . The edge banding shall be pasted with hot melt glue at 200 degree Celsius. Including Table shall come with all electric

17 Table fitting and wiring (15amp 2 switch and 3 socket). Each 12 36,647 4,39,761.4

Providing and supplying of revolving stool, ss top, height adjustable (510mm - 690mm), minimum approx height 510 mm,

maximum approx height 690mm tubular four feet base of 25.4mm od x 16g thick tube. adjustment in height by 25.4mm x 4 tpi

accurately machined screw is covered with 38.1mm x 16g vertical ms round tube welded with four feet complete.The revolving

stool have approximately 300mm dia stainless steel top with bent burr free edges & both ss top and support of ms top should be in

same design.there should not be any welding and any pop rivet or screw to fix ss top and ms top .It should be air tight without any

18 Stool welding and pop rivet.the revolving stool should have pvc shoe with nylon reinforcement.the base frame should be epoxy powder Each 36 6,769 2,43,701.1

Providing and supplying executive table with an overall size 1200mm X 600mm X 750mm complete. The top shall be made up of

25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The

profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the

size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. The understructure shall

consist of MS/CRCA rectangle pipe frame having cross-section area 40mm X 20mm with 1.2mm thick. Fixed top supporting

pedestal shall be supplied at both sides of the table. The pedestal shall be made up of 0.8mm thick high yield strength CRCA sheet

of grade 'D' confirming to IS:513 with wooden facia. It should have 3 nos. of drawer i.e. 2 box and 1 filing. It should be operated on

ball bearing sliding channel and Al die cast handle with centralized locking mechanism. The table shall be clad with modesty panel.

19 Teacher table It should be 1mm thick made up of CRCA sheet.There shall be leveller provided at the bottom. The board used should meet Each 1 30,539 30,539.0

International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength,

modulus of rupture and modulus of elasticity bending tested as per IS 2380.

Physics Providing and supplying medium back chair with ergonomic design, comfortable & aesthetically appealing complete. The seat shall

Lab be made of 15mm thick hot pressed plywood upholstered with high resiliance moulded polyurethane foam 40mm thick having

density 40kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of metal bright bar upholstered with

breathable mesh and leatherite tapestry 0.8mm thick and 535GSM. The chair shall be supplied with polyurethane arm mounted on

metal pipe loop frame. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position

locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to

100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested

as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged MS/CRCA chrome plated having pitch circle Dia.

650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon 30% glass filled,

20 Teacher chair confirming to ANSI/BIFMA standard X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 470±10 Each 1 8,755 8,754.5

mm(W) X 475±10 mm(D) and back size shall be 550±10 mm(H) from seat & overall height = 960±10 mm.

Signature of Contractor 6 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

102mm thickness -Interior Wall (Double Layer Boarding with 12.5mm thick USGBORAL Fire Gypsum plasterboards) Providing and

fixing USGBORAL System Components complete. This includes fixing of Ultraframe Floor and Ceiling channel (0.55 mm thick,

52mm wide & having two flanges of 30mm each) to the RCC Floor and Slab with Approved Fasteners @ 600 mm Centers

respectively. Ultraframe Wall Studs (0.55 mm thick, 50 mm wide having one flange of 34mm another of 36 mm). These Wall studs

are placed at 610 mm centers in Floor and Ceiling channel. Double layer of 12.5mm thick USGBORAL FireBloc Gypsum

plasterboards (Confirming to IS 2095: Part 1) is screw fixed vertically to either side of Ultraframe wall Studs with 25mm long

USGBORAL Drywall Screws at 300mm centers. The screw fixing of Gypsum plasterboards to the metal framing at the periphery,

openings and cut edges should be at 150mm centers. The horizontal & vertical joints of the Gypsum plasterboards on both sides of

the metal framework must be staggered so as to avoid through and through joints, M.S. fixing channel of 99 mm width (0.9 mm

thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to

Partition for Dark metal flat head screws. All joints to be taped & finished with 50mm wide USGBORAL Paper tape & All Purpose Joint compound.

21 Room/Chemstry (Confirming to ASTM C475). Sq.Ft 55 7,024 3,86,318.1

1. All openings & cut outs shall be sealed with Fire sealants as approved.

2. All external L junctions shall be finished with USGBORAL Metal corner tape.

All the size shall have the tolerance of upper and lower deviation of ±10mm for board/ size & ±0.02mm for metal.

Supplying and placing Study Table with Overall size 1500mm X 750mm X 1200mm . Structure is made up of 25mm X 25mm X

1.6/2.0mm THK M.S Structure complete . Understructure AndLegs are made up of 50mm X 25mm X 1.2mm THK M.S tubes. All

metal part shall be powder coating finish with DFT(Dry Film Thickness) - 35µ min. The PPCP shoes shall be insert into bottom of

legs for avoid skretches on the floors. Top of the Table is made up of 25mm Pre-Lam Particle Board having Approved Laminate

shade. Back Modesty is made up of 18mm Pre-Lam Particle Board having Approved Laminate shade.with 2mm thick PVC edge

22 Table banding . The edge banding shall be pasted with hot melt glue at 200 degree Celsius. Table shall come with all electric fitting and Each 18 36,647 6,59,642.0

wiring (15amp 2 switch and 3 socket).

Providing and supplying of revolving stool, ss top, height adjustable (510mm - 690mm), minimum approx height 510 mm,

maximum approx height 690mm tubular four feet base of 25.4mm od x 16g thick tube complete. adjustment in height by 25.4mm x

4 tpi accurately machined screw is covered with 38.1mm x 16g vertical ms round tube welded with four feet complete.The revolving

stool have approximately 300mm dia stainless steel top with bent burr free edges & both ss top and support of ms top should be in

same design.there should not be any welding and any pop rivet or screw to fix ss top and ms top .it should be air tight without any

23 Stool welding and pop rivet.the revolving stool should have pvc shoe with nylon reinforcement.the base frame should be epoxy powder Each 54 6,769 3,65,551.6

Signature of Contractor 7 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Providing and supplying executive table with an overall size 1200mm X 600mm X 750mm. The top shall be made up of 25mm thick

Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade complete. The profile

shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of

board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. The understructure shall consist

of MS/CRCA rectangle pipe frame having cross-section area 40mm X 20mm with 1.2mm thick. Fixed top supporting pedestal shall

be supplied at both sides of the table. The pedestal shall be made up of 0.8mm thick high yield strength CRCA sheet of grade 'D'

confirming to IS:513 with wooden facia. It should have 3 nos. of drawer i.e. 2 box and 1 filing. It should be operated on ball bearing

EC sliding channel and Al die cast handle with centralized locking mechanism. The table shall be clad with modesty panel. It should be

1mm thick made up of CRCA sheet.There shall be leveller provided at the bottom. The board used should meet International

24 Teacher table Each 1 30,539 30,539.0

Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of

rupture and modulus of elasticity bending tested as per IS 2380.

Providing and supplying medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made

of 15mm thick hot pressed plywood upholstered with high resiliance moulded polyurethane foam 40mm thick having density

40kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of metal bright bar upholstered with

breathable mesh and leatherite tapestry 0.8mm thick and 535GSM. The chair shall be supplied with polyurethane arm mounted on

metal pipe loop frame complete. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright

position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height

up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be

tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged MS/CRCA chrome plated having pitch

circle Dia. 650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon 30%

25 Teacher chair glass filled, confirming to ANSI/BIFMA standard X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be Each 1 8,755 8,754.5

470±10 mm(W) X 475±10 mm(D) and back size shall be 550±10 mm(H) from seat & overall height = 960±10 mm.

Providing and supplying executive table with an overall size 1200mm X 600mm X 750mm. The top shall be made up of 25mm thick

Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade complete. The profile

shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of

board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. The understructure shall consist

of MS/CRCA rectangle pipe frame having cross-section area 40mm X 20mm with 1.2mm thick. Fixed top supporting pedestal shall

be supplied at both sides of the table. The pedestal shall be made up of 0.8mm thick high yield strength CRCA sheet of grade 'D'

confirming to IS:513 with wooden facia. It should have 3 nos. of drawer i.e. 2 box and 1 filing. It should be operated on ball bearing

sliding channel and Al die cast handle with centralized locking mechanism. The table shall be clad with modesty panel. It should be

1mm thick made up of CRCA sheet.There shall be leveller provided at the bottom. The board used should meet International

26 Teacher Table Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of Each 2 30,539 61,078.0

rupture and modulus of elasticity bending tested as per IS 2380.

Signature of Contractor 8 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Providing and supplying medium back chair with ergonomic design, comfortable & aesthetically appealing complete. The seat shall

be made of 15mm thick hot pressed plywood upholstered with high resiliance moulded polyurethane foam 40mm thick having

density 40kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of metal bright bar upholstered with

breathable mesh and leatherite tapestry 0.8mm thick and 535GSM. The chair shall be supplied with polyurethane arm mounted on

metal pipe loop frame. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position

locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to

100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested

as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged MS/CRCA chrome plated having pitch circle Dia.

Teacher Chair/ Mid 650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon 30% glass filled,

Back Chair confirming to ANSI/BIFMA standard X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 470±10

mm(W) X 475±10 mm(D) and back size shall be 550±10 mm(H) from seat & overall height = 960±10 mm.

Providing and supplying of revolving stool, ss top, height adjustable (510mm - 690mm), minimum approx height 510 mm,

maximum approx height 690mm tubular four feet base of 25.4mm od x 16g thick tube. adjustment in height by 25.4mm x 4 tpi

accurately machined screw is covered with 38.1mm x 16g vertical ms round tube welded with four feet.the revolving stool have

approximately 300mm dia stainless steel top with bent burr free edges & both ss top and support of ms top should be in same

design.there should not be any welding and any pop rivet or screw to fix ss top and ms top .it should be air tight without any

welding and pop rivet.the revolving stool should have pvc shoe with nylon reinforcement.the base frame should be epoxy powder

28 SS Stool coated. Each 40 6,769 2,70,779.0

Providing and supplying executive table with an overall size 1200mm X 600mm X 750mm complete. The top shall be made up of

25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The

profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the

size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. The understructure shall

consist of MS/CRCA rectangle pipe frame having cross-section area 40mm X 20mm with 1.2mm thick. Fixed top supporting

pedestal shall be supplied at both sides of the table. The pedestal shall be made up of 0.8mm thick high yield strength CRCA sheet

of grade 'D' confirming to IS:513 with wooden facia. It should have 3 nos. of drawer i.e. 2 box and 1 filing. It should be operated on

ball bearing sliding channel and Al die cast handle with centralized locking mechanism. The table shall be clad with modesty panel.

29 Teacher table It should be 1mm thick made up of CRCA sheet.There shall be leveller provided at the bottom. The board used should meet Each 13 30,539 3,97,006.8

International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength,

modulus of rupture and modulus of elasticity bending tested as per IS 2380.

Signature of Contractor 9 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Providing and supplying medium back chair with ergonomic design, comfortable & aesthetically appealing complete. The seat shall

be made of 15mm thick hot pressed plywood upholstered with high resiliance moulded polyurethane foam 40mm thick having

density 40kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of metal bright bar upholstered with

breathable mesh and leatherite/fabric tapestry 0.8mm thick and 535GSM. The chair shall be supplied with polyurethane arm

mounted on metal pipe loop frame. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with

upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat

height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism

should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged MS/CRCA chrome plated having

30 Teacher chair pitch circle Dia. 650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon Each 13 8,755 1,13,808.6

30% glass filled, confirming to ANSI/BIFMA standard X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size

shall be 470±10 mm(W) X 475±10 mm(D) and back size shall be 550±10 mm(H) from seat & overall height = 960±10 mm.

Supplying & Placing workstation table in completely knock down conditions with an overall size 3000mm X 500mm X 1050mm that

is to be assembled at site. The top shall be made up of back to back 25mm thick Pre-laminated particle board of grade II of IS

12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape having four

sharing base and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel

and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The workstation shall have desk based

partition of 25 mm thick screen with overall height 1050mm. The partition shall be linear in profile and provided in the front side of

user. The screen shall have the asseambly of top bar, side bar, side trim, bottom bar made up of aluminium extrusions (pre-

treated) and duly powder coated with 40-60µ thick and also be covered with die cast end caps on joints. There shall be soft-board

(with fabric) provided at front of the user. The workstation should have concealed wire management capabilities and also be

engaged for responsive and safe operations of power, telecommunications and data (LAN) with the assistance of vertical cabel

riser made up of CRCA 1mm thick punched sheet confirming to IS:513. The worktop shall be supplied with flapper box which have

31 LIBRARY TABLE separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire Each 6 38,648 2,31,888.6

movements. The raceway or metal wire carrier shall be situated below the worktop as per requirement of inlaying the electrical

management and carrying the wire horizontally. The top shall be supported on MS powder coated rectangle pipe frame having

cross-section area 40mm X 20mm with 1.6mm thick. The table understructure shall have powder coated metal legs having cross-

section area 60mm X 30mm with 1.6mm thick.

Signature of Contractor 10 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Supplying & Placing workstation table in completely knock down conditions with an overall size 3000mm X 1000mm X 1050mm

that is to be assembled at site. The top shall be made up of back to back 25mm thick Pre-laminated particle board of grade II of IS

12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape having four

sharing base and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel

and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The workstation shall have desk based

partition of 25 mm thick screen with overall height 1050mm. The partition shall be linear in profile and provided in the front side of

user. The screen shall have the asseambly of top bar, side bar, side trim, bottom bar made up of aluminium extrusions (pre-

treated) and duly powder coated with 40-60µ thick and also be covered with die cast end caps on joints. There shall be soft-board

(with fabric) provided at front of the user. The workstation should have concealed wire management capabilities and also be

engaged for responsive and safe operations of power, telecommunications and data (LAN) with the assistance of vertical cabel

riser made up of CRCA 1mm thick punched sheet confirming to IS:513. The worktop shall be supplied with flapper box which have

32 LIBRARY TABLE separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire Each 2 60,036 1,20,072.0

movements. The raceway or metal wire carrier shall be situated below the worktop as per requirement of inlaying the electrical

management and carrying the wire horizontally. The top shall be supported on MS powder coated rectangle pipe frame having

cross-section area 40mm X 20mm with 1.6mm thick. The table understructure shall have powder coated metal legs having cross-

section area 60mm X 30mm with 1.6mm thick.

Supplying & Placing workstation table in completely knock down conditions with an overall size 1500mm X 500mm X 1050mm that

is to be assembled at site. The top shall be made up of back to back 25mm thick Pre-laminated particle board of grade II of IS

12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape having four

sharing base and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel

and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The workstation shall have desk based

partition of 25 mm thick screen with overall height 1050mm. The partition shall be linear in profile and provided in the front side of

user. The screen shall have the asseambly of top bar, side bar, side trim, bottom bar made up of aluminium extrusions (pre-

treated) and duly powder coated with 40-60µ thick and also be covered with die cast end caps on joints. There shall be soft-board

(with fabric) provided at front of the user. The workstation should have concealed wire management capabilities and also be

engaged for responsive and safe operations of power, telecommunications and data (LAN) with the assistance of vertical cabel

riser made up of CRCA 1mm thick punched sheet confirming to IS:513. The worktop shall be supplied with flapper box which have

33 LIBRARY TABLE separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire Each 1 26,036 26,036.0

movements. The raceway or metal wire carrier shall be situated below the worktop as per requirement of inlaying the electrical

management and carrying the wire horizontally. The top shall be supported on MS powder coated rectangle pipe frame having

cross-section area 40mm X 20mm with 1.6mm thick. The table understructure shall have powder coated metal legs having cross-

section area 60mm X 30mm with 1.6mm thick.

Supplying and placing cafe chair complete. The seat and back shall be made of injection moulded polypropylene shell. The seat

shall be upholstered with high resiliance polyurethane foam 19mm thick having density 40kg/m³ with leatherite tapestry 0.8mm thick

and 535GSM. The PP shell shall be supplied in perforated position and fixed with main frame. The frame structure shall be

supported by four legs made up of MS/CRCA chrome plated tubular pipe frame having cross-section area 25mm X 12mm with

1.6mm thick. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor. The seat size

shall be 400±10 mm(D) X 410±10 mm(w) and back size sall be 455±10 mm(W) X 370±10 mm(H) from seat. Overall height shall

34 LIBRARY CHAIR be = 820±10 mm & overall depth = 565±10 mm. Each 42 3,970 1,66,742.8

Signature of Contractor 11 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Providing, supplying and placing double side steel Library Racks in perfectly upright and straight position complete. The overall size

of the rack shall be 925mm (W) X 600mm (D) X 2110mm (H). The rack shall be supplied with 4 nos. of adjustable shelves on both

side i.e. 10 loading levels. Rack, side panel, skirting shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’

confirming to IS: 513. Side and top shall be covered with 18mm thick Pre-laminated particle board of grade II of IS 12823. The

edges of the board shall be sealed with 2mm thick PVC edge banding. The add-on units can be stacked width wise to form a bank

of racks having common side panel. The shelves shall be folded constructions which have intrinsic rigidity and high load carrying

capacity. Uniformly Distributed load capacity per each shelf shall be 80kg maximum. Each shelf shall be provided with stiffener at

DOUBLE SIDED bottom for strength and back stiffener for separator between front and rear shelf. All steel components shall be epoxy polyester

BOOK RACK powder coated to the thickness of 40-60µ. Adjustable leveler shall be provided with metal insert to resist scratches on the floor and

also level & support structure.

Providing, supplying and placing an open display book racks complete. The overall size of the rack shall be 925mm (W) X 300mm

(D) X 1800mm (H). The rack shall be supplied with 4 nos. of adjustable shelves i.e. 5 loading levels. Rack, side panel, skirting shall

be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Side and top shall be covered with

18mm thick Pre-laminated particle board of grade II of IS 12823. The edges of the board shall be sealed with 2mm thick PVC edge

banding. The add-on units can be stacked width wise to form a bank of racks having common panel. Back panel up to the bottom

of third rack shall have additional rigidity. The shelves shall have folded constructions which have intrinsic rigidity and high load

carrying capacity. Uniformly distributed load capacity per each shelf shall be 80 kg maximum. Each rack shall be provided with

SINGLE SIDED stiffener at bottom for strength. Label holder & range indicators on each main unit for inserting labels. All steel components shall be

BOOK RACK epoxy polyester powder coated to the thickness of 40-60µ. Adjustable leveler shall be provided with metal insert to resist scratches

on the floor and also level & support structure.

Providing, supplying and placing steel almirah. The overall size of the Almirah shall be 915mm (W) X 485mm (D) X 1980mm (H).

The Almirah shall be supplied with 2 nos. of glass doors with 4 nos. of adjustable shelves i.e. 5 loading compartments. The glass

used shall be 4mm thick clear. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying

capacity. Uniformly distributed load capacity of each shelf shall be 40 Kg maximum. Each rack shall be provided with stiffener at

GLASS DOOR bottom for strength. The entire body panel and shelf shall be made of high yield strength 0.8mm thick and door 1mm thick CRCA

37 sheet of grade ‘D’ confirming to IS: 513. The complete steel structure shall be constructed by welding and provide finishing with Each 8 31,800 2,54,400.0

epoxy polyester powder coated to the thickness 40-50µ thick.

Providing and fixing in position baggaging rack of model name Pigeon hole having side, top, bottom and shelf panel made up of

18mm thick Pre-laminated particle board (interior grade) and back panel made up of 18mm thick Pre-laminated particle board and

the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted

LIBRARY with the assistance of edge banding machine at 200 degree Celsius complete. The compartment size shall be approx. 275mm X

275mm. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time

38 Megzine Rack load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Each 1 25,958 25,958.1

Supplying and placing of heavy duty Newspaper Display stand made up of round MS pipe 2 layers stand for keeping magzines and

new paper as per the approval of Engineer in charge complete.

Newspaper Display

Signature of Contractor 12 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Supplying and placing of Newspaper reading table frame made out of stainless steel and top and modesty made out of 18mm

thick Pre-laminated particle board (interior grade) as per the approval of Engineer in charge complete.

Providing and supplying executive table with an overall size 1200mm X 600mm X 750mm. The top shall be made up of 25mm thick

Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade complete. The profile

shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of

board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. The understructure shall consist

of MS/CRCA rectangle pipe frame having cross-section area 40mm X 20mm with 1.2mm thick. Fixed top supporting pedestal shall

be supplied at both sides of the table. The pedestal shall be made up of 0.8mm thick high yield strength CRCA sheet of grade 'D'

confirming to IS:513 with wooden facia. It should have 3 nos. of drawer i.e. 2 box and 1 filing. It should be operated on ball bearing

sliding channel and Al die cast handle with centralized locking mechanism. The table shall be clad with modesty panel. It should be

Computer Desk 1mm thick made up of CRCA sheet.There shall be leveller provided at the bottom. The board used should meet International

41 (1200mm X 600mm Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of Each 2 19,850 39,700.7

X 750mm) rupture and modulus of elasticity bending tested as per IS 2380.

Supplying & Placing workstation table in completely knock down conditions with an overall size 900mm X 600mm X 1050mm that is

to be assembled at site. The top shall have the size 900mm X 600mm made up of sharing base for workstation. 25mm thick E1

grade PLPB table top having low VOC emission with matching edgebanding grade II of IS 12823 with one side laminate and finish

as per approved shade. The profile of the top shall be in rectangle shape with smooth radial corners as per EHS norms for safety

and the edges shall be sealed with 2mm thick strip of impermeable PVC that is cut to fit the size of board panel and duly pasted

using EVA / PUR Holt melt adhesive having low VOC emission with the assistance of edge banding machine at 200 degree celsius.

The workstation shall have desking based system with overall height 1050mm. Glass screen is made of 8 mm thick sandwich glass

of 1050mm(W) x 300mm(H) mounted on anodized brackets. Privacy screen to be provided between 2 user made of 8 mm thick

sandwich glass of 600 mm(W) x 300mm(H) mounted on anodized brackets MS Powder coated 40x30mm beams are considered to

support table top. The table understructure shall have Aluminum Powder coated SOLE series Trapezoid shape legs (End Legs)

Computer Desk with die cast connectors for weldfree joints + Mid legs: 30x60mm MS-Powder coated Legs. Sole series Trapezoid leg having C-

42 (1050mm X 600mm profile Slant Leg. Aluminum flapper with Soft closing shall be provided on top with size 350mm X 135 size or 500 x 135 mm size Each 8 23,210 1,85,677.0

X 750mm) as per site requirement. Horizontal Power Management shall be given under Aluminium flapper on metal cable tray, where switch

plate shall be mounted and vertical metal riser for vertical wire trucking. 1.2mm thk CRCA Powder coated wire tray with switch

plate and vertical cable risers are considered for wire management. Flapper box shall have several components for electric and

data (6amp/15amp 2 switch, 3 socket , Data LAN port along with complete wiring.

Signature of Contractor 13 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Providing and supplying medium back chair with ergonomic design, comfortable & aesthetically appealing complete. The seat shall

be made of 15mm thick hot pressed plywood upholstered with high resiliance moulded polyurethane foam 40mm thick having

density 40kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of metal bright bar upholstered with

breathable mesh and leatherite/fabric tapestry 0.8mm thick and 535GSM. The chair shall be supplied with polyurethane arm

mounted on metal pipe loop frame. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with

upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat

height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism

should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged MS/CRCA chrome plated having

pitch circle Dia. 650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon

43 COMPUTER CHAIR 30% glass filled, confirming to ANSI/BIFMA standard X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size Each 12 8,755 1,05,054.1

shall be 470±10 mm(W) X 475±10 mm(D) and back size shall be 550±10 mm(H) from seat & overall height = 960±10 mm.

Supplying & Placing reception table in completely knock down conditions with an overall size 1800mm X 600mm X 1000mm that is

to be assembled at site. The construction shall be free standing structure constructed with the help of minifix dowels and pins. The

top shall be made up of 18mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per

approved shade. The table shall have upper top shelf with 18mm thick Pre-laminated particle board. The main top shall be

supported on MS powder coated pipe frame cross-section area 40mm X 20mm. The upper top shall be supported on 200mm

metal studs. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable

PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. A

pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 550mm X 280mm. The trey shall be

operated on keyboard channel. The end wall of the table on the side shall be topped by gable end. It shall be made up of 18mm

thick Pre-laminated particle board and profile shall be in linear shape with appropriate PVC edge banding. There shall be buffers

provided at the bottom to avoid the scratches on the floor. The table shall be clad with 18mm thick modesty panel which provide

44 structural support for the table. It should be 18mm thick pre-laminated particle board in linear shape with appropriate edge banding Each 1 32,066 32,065.9

(1500mm X 600mm connecting both end. A mobile pedestal shall be provided with an overall size 400mm X 450mm X 735mm. The pedestal shall be

x 1000mm) made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, facia shall be 18mm thick & drawer base

shall be 9mm thick. The pedestal shall have 1 drawer and 1 shutter. The drawer shall be operated on MP lock mechanism and SS

handle and easily close & open with the assistance of sliding channel to enable smooth movement. The pedestal shall be mounted

on injection moulded nylon castor.

Providing and placing of side unit for storage purpose with an overall size 1200mm X 450mm X 600mm complete. The side unit

shall be made up of Pre-laminated particle board of grade II of IS 12823 with top 25mm thick, base 9mm thick and other parts

18mm thick like shutter, back, side panel etc. It shall have 2 sliding shutter which slides over sliding rail track. The shutter shall be

operated by SS handle. The side unit shall be mounted over injection moulded nylon castor

45 SIDE UNIT Each 1 12,622 12,622.2

Signature of Contractor 14 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Supplying & placing storage unit with an overall size 1800mm X 400mm X 2000mm. It should be made up of Pre-laminated particle

board of grade II of IS 12823 with approved laminate and finish as per approved shade complete. The top of the storage shall have

50mm thick cantor top with full round post form. All other profile i.e. side, back, shutter, shelf, skirting shall be 18mm thick and

base 9mm thick. The edges shall be sealed with thin strip of impermeable PVC that is cut to fit the size of board panel and duly

pasted with the assistance of edge banding machine at 200 degree Celsius. The storage shall be supplied with 12 nos. of shelf, 2

nos. of drawer and 6 nos. of door shutter. The glass shutter shall be used with 4mm thick clear glass insert within PLPB profile. The

shutter and drawer shall be operated with concealed crank hinge and roller channel as well as SS handle. To protect the wall from

kicks, abrasion and serve as a decorative moulding skirting shall be provided at bottom. There shall be buffers provided at the

46 BACK UNIT bottom to avoid scratches on the floor. The boards used should meet international standards of quality and safety, Indian standard Each 1 46,317 46,317.5

IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of elasticity bending tested as per IS

Supply and installation of General Chemistry Fume Hood Type: Low Constant Volume; Size:5 feet with chemical storage base

cabinet complete in all respect.

Supply and installation of Chemical Storage Cabinet Floor Mounted Full Height Chemical Storage Cabinets (2 Glass Door, Phenolic

Resin Laminate Liner, 4 Adjustable Shelves & 1 Fix, 15 PP trays.) 1000 mm (L) x 460 mm (D) x 1800 mm (H)complete in all

Supply and installation of Blower and Ducting - 1400 CFM Centrifugal Blower - 50mm WC Static pressure, 1440RPM, 3 Phase 1.5

HP motor for air suction in cluster of 2 nos. of 5 ft Fume Hood complete in all respect.

Supply and installation of 700 CFM Centrifugal Blower - 50mm WC Static pressure, 1440RPM, 3 Phase 1 HP motor for air suction

in Fume Hood complete in all respect.

Supply and installation of 400 CFM Centrifugal Blower - 50mm WC Static pressure, 1440RPM, 3 Phase 0.5 HP motor with DOL

Starter for air suction in cluster of 4 nos. of Chemical Storage Cabinet complete in all respect..

Supply and installation of PP+FRP Ducting complete in all respect.

Labs 3 Number Supply and installation of Duct supports including of brackets, clamps and other hardware etc complete in all respect.

Supply and installation of Gas Distribution system for Nitrogen, vacuam, LPG, water inlet and outlet (including piping and fitment)

complete in all respect..

LABORATORIES ACCESSORIES -

Signature of Contractor 15 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Supply and installation of Lab tables Work top complete with accessories:- Made of (16 to 18mm) thick Jet Black Granite Top with

chamfer moulding at the front & groove at the bottom to avoid chemical spillage on the modules. Worktop all joints are sealed thru

Epoxy sealeant. 6 mm x 30 mm Neoprene packing must be CRCAven between Worktop (Granite) and Metal Storage. Material of

Construction:- Completely made of 0.8 mm CRCA sheets., Under Bench Module:- Completely made of 0.8 mm CRCA sheets as

per IS 513 standard. The sound deadning plastic bumpers to be used while closing the shutter. The entire module is made up of

CRCA panels and are bolted/rivetted for achiving maximum strength with high corrossion resistance. The shutters or doors are

mounted to the modules by hinges which are openable to 95 degree. Drawers are mounted with the ball bearing based telescopic

slides which are sturdy & able to take load upto 30kg. Provision of lock and key is optional. Length : 450mm / 600mm / 750mm /

900mm L (As per layout) Depth : 530mm D, Height : 635 mm H Standing Height- Table Height : 900 mm H Sitting Height Table -

800 mm, Frame construction:- Entire structure should be "C" frame type. 60 X 30 X 2 mm pipe is used for main frame structure. -

CO2 welded & finished with highly chemical resistant epoxy powder coating. Knee Space area :- Openable back cover panel.

Instrumentation and Sitting area knee space need to be 600 or 750 mm.

Reagent Rack:- Three tier: Island Table: 3 No.s Toughened Glass Adjustable Shelves reagent shelf. Top & Bottom rack 300 mm

Clear space and outer 300 mm Side Table: Three tier adjustable Toughened Glass Shelf reagent shelf. Top & Bottom rack:

150mm clear space outer 150 mm Overall height: 750 mm, Electrical Trunking:- Wall Table: Triangular Electrical Trunking of

100mmD x 85 mmH, Switch & Sockets:- Elect. Socket With Piano Switch 6/16Amp With complete Wiring and fitting (2.5 Sq.mm

FRLS), LAN (Data) Points:- RJ-45 type Data point fixed in electrical trunking., Powder Coating:- Complete module & frame work

are processed with multitank pre- treatment and finished with highly corrossion resistant 'AKZONOBEL/equiv' epoxy powder

coating With 70 - 80 microns thickness. Our Automatic coating plant and fully Conveyorize Oven ensures that coating surface get

apprpriate temperature to bond with the surface. The paint surface to be tested for quality and lonCRCAvity out of which 1000

hours salt spray test is important factor. fitting of Gas Distribution system for Nitrogen, vacuam, LPG, water inlet and outlet

(including piping and fitment). as per the approval of Engineer in charge.

AS per below mentioned details and given specifications.

Granite worktop (16 to 18 mm)

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)LHS

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)RHS

Standing Height 2 Shutters Sink Unit - 900 mm(L)

C-Frame 750 mm (D) X 900 mm(H) Table - 690 mm(L) X 850 mm(H) #(For Both Sides)

Standing Height Leg Space-570 mm(L) with Back Panel(size:-570mm(L) x 529 mm(H))

Standing Height Leg Space-650 mm(L) with Back Panel(size:-650mm(L) x 529 mm(H))

Standing Height Leg Space-660 mm(L) with Back Panel(size:-660mm(L) x 529 mm(H))

Gap Closing Panel for 'C' & 'H' frame ( - Table Height 900 mm )-538 mm(W) X 728 mm(H)

Signature of Contractor 16 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Standing Height- Gap Closing Panel (Table 750 mm(W) x 900 mm(H))- 55 mm (W) X 728 mm(H)

Corner Piece Of Electrical Trunking.

Elect Trunking Box Str. Single side With wiring (Wall Table)600 mm(L) X C24

Elect Trunking Box Str. Single side With wiring (Wall Table)680 mm(L) X 100 mm(W) X 85 mm(H)

Elect Trunking Box Str. Single side With wiring (Wall Table)700mm(L) X 100 mm(W) X 85 mm(H)

Elect Trunking Box Str. Single side With wiring (Wall Table)710mm(L) X 100 mm(W) X 85 mm(H)

Elect Trunking Box Str. Single side With wiring (Wall Table)1100mm(L) X 100 mm(W) X 85 mm(H)

Elect Trunking Box Str. Single side With wiring (Wall Table)1340mm(L) X 100 mm(W) X 85 mm(H)

Elect Trunking Box Str. Single side With wiring (Wall Table)1350mm(L) X 100 mm(W) X 85 mm(H)

Elect Trunking Box Str. Single side With wiring (Wall Table)1470mm(L) X 100 mm(W) X 85 mm(H)

Elect. Socket With Piano Switch 6/16Amp With complete Wiring (2.5 Sq.mm FRLS)

Wall Mounted Overhead File Cabinets (Float Glass Door) CRCA Structure 2 Shutter with 1 adjustable shelf Size -750 mm (L) x 375

Wall Mounted Overhead File Cabinets (Float Glass Door) CRCA Structure 2 Shutter with 1 adjustable shelf Size -600 mm (L) x 375

Furniture Peg Board Big Size: 750Mm L X 750Mm H ( 33 Pegs.) With Ss Collection Tray.

Hand Held Eye Wash Single Bulk ( Broen )

High Rise Revolving Stool (seat cover will be black) - With cushion in seat & back, Metal stand with ring type footrest & castors &

Big PP Sink - 600L X 450W X 300D mm

Three Way Water Tap-Gooseneck Type (Far-Italy / "TOF" Italy / Broen Denmark)

One Way Utility Tap For LPG (Far-Italy / "TOF" Italy / Broen Denmark make)

One Way Utility Tap For Nitrogen (Far-Italy / "TOF" Italy / Broen Denmark make)

One Way Utility Tap For Vacuum (Far-Italy / "TOF" Italy / Broen Denmark make)

Granite worktop (16 to 18 mm)

Signature of Contractor 17 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

C-Frame 750 mm (D) X 900 mm(H) Table - 690 mm(L) X 850 mm(H)

32 (For Both Sides) Nos. 7.00 5,793 40,547.8

Gap Closing Panel for 'C' & 'H' frame ( - Table Height 900 mm )-

Table 2 Wall Mounted Overhead File Cabinets (Float Glass Door) CRCA

Structure 2 Shutter with 1 adjustable shelf Size -750 mm (L) x 375 mm (D) x 675 mm (H)

High Rise Revolving Stool (seat cover will be black) - With cushion in seat & back, Metal stand with ring type footrest & castors &

Standing Height Modesty Panel (Table 900 mm(H))- 1000 mm(L) x

Granite worktop (16 to 18 mm)

C-Frame 750 mm (D) X 900 mm(H) Table - 690 mm(L) X 850 mm(H)

38 (For Both Sides) Nos. 7.00 5,793 40,547.8

Gap Closing Panel for 'C' & 'H' frame ( - Table Height 900 mm )-

Table 3 Wall Mounted Overhead File Cabinets (Float Glass Door) CRCA Structure 2 Shutter with 1 adjustable shelf Size -750 mm (L) x 375

High Rise Revolving Stool (seat cover will be black) - With cushion in seat & back, Metal stand with ring type footrest & castors &

Standing Height Modesty Panel (Table 900 mm(H))- 1000 mm(L) x

Granite worktop (16 to 18 mm)

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)LHS

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)RHS

Standing Height 2 Shutters Sink Unit - 750 mm(L)

H-Frame 1800 mm (D) X 900 mm(H) I-Table - 1740 mm(L) X 850

47 mm(H) (For Both Sides) Nos. 6.00 11,585 69,510.5

Gap Closing Panel for 'C' & 'H' frame ( - Table Height 900 mm )-

Standing Height- Gap Closing Panel (Table 1800 mm(W) x 900

Furniture 2 Compartment Service Droppers In Lab 300Mm L X

Reagent Rack Island Table:3 Tier Struct, 3Adjustable Toughened Glass Shelves -

Signature of Contractor 18 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Reagent Rack Island Table:3 Tier Struct, 3Adjustable Toughened Glass Shelves -

Elect. Socket With Piano Switch 6/16Amp (Northwest/ Norisys Make)

53 With Wiring (2.5 Sq.mm FRLS) Nos. 18.00 1,105 19,890.0

Hand Held Eye Wash Single Bulk ( Broen )

High Rise Revolving Stool (seat cover will be black) - With cushion in seat & back, Metal stand with ring type footrest & castors &

Big PP Sink - 600L X 450W X 300D mm

Three Way Water Tap-Gooseneck Type (Far-Italy / "TOF" Italy / Broen Denmark)

Two Way Utility Tap For LPG (Far-Italy / "TOF" Italy / Broen Denmark make)

Two Way Utility Tap For Nitrogen (Far-Italy / "TOF" Italy / Broen Denmark make)

Two Way Utility Tap For Vacuum (Far-Italy / "TOF" Italy / Broen Denmark make)

Standing Height Modesty Panel (Table 900 mm(H))- 1000 mm(L) x 728

Granite worktop (16 to 18 mm)

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)LHS

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)RHS

Standing Height 2 Shutters Sink Unit - 750 mm(L)

H-Frame 1800 mm (D) X 900 mm(H) I-Table - 1740 mm(L) X 850

66 mm(H) (For Both Sides) Nos. 6.00 11,585 69,510.5

Gap Closing Panel for 'C' & 'H' frame ( - Table Height 900 mm )-

Standing Height- Gap Closing Panel (Table 1800 mm(W) x 900

Furniture 2 Compartment Service Droppers In Lab 300Mm L X

100Mmd X 2100Mm H

Reagent Rack Island Table:3 Tier Struct, 3Adjustable Toughened Glass Shelves -

Table 5 Reagent Rack Island Table:3 Tier Struct, 3Adjustable Toughened Glass Shelves -

Signature of Contractor 19 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Elect. Socket With Piano Switch 6/16Amp (Northwest/ Norisys Make)

72 With Wiring (2.5 Sq.mm FRLS) Nos. 18.00 1,105 19,890.0

Hand Held Eye Wash Single Bulk ( Broen )

High Rise Revolving Stool (seat cover will be black) - With cushion in seat & back, Metal stand with ring type footrest & castors &

Big PP Sink - 600L X 450W X 300D mm

Three Way Water Tap-Gooseneck Type (Far-Italy / "TOF" Italy / Broen Denmark)

Two Way Utility Tap For LPG (Far-Italy / "TOF" Italy / Broen Denmark make)

Two Way Utility Tap For Nitrogen (Far-Italy / "TOF" Italy / Broen Denmark make)

Two Way Utility Tap For Vacuum (Far-Italy / "TOF" Italy / Broen Denmark make)

Standing Height Modesty Panel (Table 900 mm(H))- 1000 mm(L) x

Granite worktop (16 to 18 mm)

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)LHS

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)RHS

C-Frame 750 mm (D) X 900 mm(H) Table - 690 mm(L) X 850 mm(H)

84 (For Both Sides) Nos. 5.00 5,793 28,962.7

Standing Height Leg Space-680 mm(L) with Back Panel(size:-680

Standing Height Leg Space-690 mm(L) with Back Panel(size:-690

Gap Closing Panel for 'C' & 'H' frame ( - Table Height 900 mm )-

Standing Height- Gap Closing Panel (Table 750 mm(W) x 900

Elect Trunking Box Str. Single side With wiring (Wall Table)710

Elect Trunking Box Str. Single side With wiring (Wall Table)1130

Elect Trunking Box Str. Single side With wiring (Wall Table)1140

Elect Trunking Box Str. Single side With wiring (Wall Table)1160

Elect. Socket With Piano Switch 6/16Amp (Northwest/ Norisys Make)

93 With Wiring (2.5 Sq.mm FRLS) Nos. 7.00 1,105 7,735.0

Signature of Contractor 20 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Wall Mounted Overhead File Cabinets (Float Glass Door) CRCA Structure 2 Shutter with 1 adjustable shelf Size -600 mm (L) x 375

High Rise Revolving Stool (seat cover will be black) - With cushion in seat & back, Metal stand with ring type footrest & castors &

Granite worktop (16 to 18 mm)

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)LHS

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)RHS

Standing Height 2 Shutters Sink Unit - 900 mm(L)

C-Frame 750 mm (D) X 900 mm(H) Table - 690 mm(L) X 850 mm(H)

100 (For Both Sides) Nos. 8.00 5,793 46,340.3

Gap Closing Panel for 'C' & 'H' frame ( - Table Height 900 mm )-

Standing Height- Gap Closing Panel (Table 750 mm(W) x 900

Corner Piece Of Electrical Trunking.

Elect Trunking Box Str. Single side With wiring (Wall Table)600

Elect Trunking Box Str. Single side With wiring (Wall Table)870

Elect Trunking Box Str. Single side With wiring (Wall Table)900

Elect Trunking Box Str. Single side With wiring (Wall Table)1030

Elect Trunking Box Str. Single side With wiring (Wall Table)1190

Elect. Socket With Piano Switch 6/16Amp (Northwest/ Norisys Make)

109 With Wiring (2.5 Sq.mm FRLS) Nos. 8.00 1,105 8,840.0

Furniture Peg Board Big Size: 750Mm L X 750Mm H ( 33 Pegs.) With

110 Ss Collection Tray. Nos. 1.00 8,542 8,542.4

Hand Held Eye Wash Single Bulk ( Broen )

High Rise Revolving Stool (seat cover will be black) - With cushion in seat & back, Metal stand with ring type footrest & castors &

Big PP Sink - 600L X 450W X 300D mm

Three Way Water Tap-Gooseneck Type (Far-Italy / "TOF" Italy / Broen Denmark)

Signature of Contractor 21 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

One Way Utility Tap For LPG (Far-Italy / "TOF" Italy / Broen Denmark make)

One Way Utility Tap For Nitrogen (Far-Italy / "TOF" Italy / Broen Denmark make)

One Way Utility Tap For Vacuum (Far-Italy / "TOF" Italy / Broen Denmark make)

Standing Height Modesty Panel (Table 900 mm(H))- 1000 mm(L) x

Granite worktop (16 to 18 mm)

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)RHS

Standing Height 2 Shutters Sink Unit - 900 mm(L)

C-Frame 750 mm (D) X 900 mm(H) Table - 690 mm(L) X 850 mm(H)

122 (For Both Sides) Nos. 7.00 5,793 40,547.8

Gap Closing Panel for 'C' & 'H' frame ( - Table Height 900 mm )-

Standing Height- Gap Closing Panel (Table 750 mm(W) x 900

Corner Piece Of Electrical Trunking.

Elect Trunking Box Str. Single side With wiring (Wall Table)600

Elect Trunking Box Str. Single side With wiring (Wall Table)740

Elect Trunking Box Str. Single side With wiring (Wall Table)1170

Elect Trunking Box Str. Single side With wiring (Wall Table)1270

Elect. Socket With Piano Switch 6/16Amp (Northwest/ Norisys Make)

130 With Wiring (2.5 Sq.mm FRLS) Nos. 9.00 1,105 9,945.0

Wall Mounted Overhead File Cabinets (Float Glass Door) CRCA Structure 2 Shutter with 1 adjustable shelf Size -600 mm (L) x 375

Hand Held Eye Wash Single Bulk ( Broen )

High Rise Revolving Stool (seat cover will be black) - With cushion in seat & back, Metal stand with ring type footrest & castors &

Big PP Sink - 600L X 450W X 300D mm

Three Way Water Tap-Gooseneck Type (Far-Italy / "TOF" Italy / Broen Denmark)

One Way Utility Tap For LPG (Far-Italy / "TOF" Italy / Broen Denmark make)

Signature of Contractor 22 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

One Way Utility Tap For Nitrogen (Far-Italy / "TOF" Italy / Broen Denmark make)

One Way Utility Tap For Vacuum (Far-Italy / "TOF" Italy / Broen Denmark make)

Standing Height Modesty Panel (Table 900 mm(H))- 1000 mm(L) x

Granite worktop (16 to 18 mm)

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)LHS

Standing Height 2 Shutters Sink Unit - 900 mm(L)

C-Frame 750 mm (D) X 900 mm(H) Table - 690 mm(L) X 850 mm(H)

143 (For Both Sides) Nos. 6.00 5,793 34,755.3

Gap Closing Panel for 'C' & 'H' frame ( - Table Height 900 mm )-

Standing Height- Gap Closing Panel (Table 750 mm(W) x 900

Corner Piece Of Electrical Trunking.

Elect Trunking Box Str. Single side With wiring (Wall Table)600

Elect Trunking Box Str. Single side With wiring (Wall Table)870

Elect Trunking Box Str. Single side With wiring (Wall Table)900

Elect. Socket With Piano Switch 6/16Amp (Northwest/ Norisys Make)

150 With Wiring (2.5 Sq.mm FRLS) Nos. 6.00 1,105 6,630.0

Hand Held Eye Wash Single Bulk ( Broen )

High Rise Revolving Stool (seat cover will be black) - With cushion in seat & back, Metal stand with ring type footrest & castors &

Big PP Sink - 600L X 450W X 300D mm

Three Way Water Tap-Gooseneck Type (Far-Italy / "TOF" Italy / Broen Denmark)

One Way Utility Tap For LPG (Far-Italy / "TOF" Italy / Broen Denmark make)

One Way Utility Tap For Nitrogen (Far-Italy / "TOF" Italy / Broen Denmark make)

One Way Utility Tap For Vacuum (Far-Italy / "TOF" Italy / Broen Denmark make)

Standing Height Modesty Panel (Table 900 mm(H))- 1000 mm(L) x

Signature of Contractor 23 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Granite worktop (16 to 18 mm)

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)LHS

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)RHS

H-Frame 1500 mm (D) X 900 mm(H) I-Table - 1440 mm(L) X 850

162 mm(H) (For Both Sides) Nos. 3.00 11,585 34,755.3

Standing Height- Gap Closing Panel (Table 1500 mm(W) x 900

Furniture 2 Compartment Service Droppers In Lab 300Mm L X

Reagent Rack Island Table:3 Tier Struct, 3Adjustable Toughened Glass Shelves -

Elect. Socket With Piano Switch 6/16Amp (Northwest/ Norisys Make)

166 With Wiring (2.5 Sq.mm FRLS) Nos. 6.00 1,105 6,630.0

High Rise Revolving Stool (seat cover will be black) - With cushion in seat & back, Metal stand with ring type footrest & castors &

Two Way Utility Tap For LPG (Far-Italy / "TOF" Italy / Broen Denmark make)

Two Way Utility Tap For Nitrogen (Far-Italy / "TOF" Italy / Broen Denmark make)

Two Way Utility Tap For Vacuum (Far-Italy / "TOF" Italy / Broen Denmark make)

Granite worktop (16 to 18 mm)

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)LHS

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)RHS

H-Frame 1500 mm (D) X 900 mm(H) I-Table - 1440 mm(L) X 850

174 mm(H) (For Both Sides) Nos. 3.00 11,585 34,755.3

Standing Height- Gap Closing Panel (Table 1500 mm(W) x 900

Furniture 2 Compartment Service Droppers In Lab 300Mm L X

Reagent Rack Island Table:3 Tier Struct, 3Adjustable Toughened Glass Shelves -

Elect. Socket With Piano Switch 6/16Amp (Northwest/ Norisys Make)

178 With Wiring (2.5 Sq.mm FRLS) Nos. 6.00 1,105 6,630.0

High Rise Revolving Stool (seat cover will be black) - With cushion in seat & back, Metal stand with ring type footrest & castors &

Two Way Utility Tap For LPG (Far-Italy / "TOF" Italy / Broen Denmark make)

Signature of Contractor 24 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Two Way Utility Tap For Nitrogen (Far-Italy / "TOF" Italy / Broen Denmark make)

Two Way Utility Tap For Vacuum (Far-Italy / "TOF" Italy / Broen Denmark make)

Granite worktop (16 to 18 mm)

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)LHS

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)RHS

H-Frame 1500 mm (D) X 900 mm(H) I-Table - 1440 mm(L) X 850

186 mm(H) (For Both Sides) Nos. 3.00 11,585 34,755.3

Standing Height- Gap Closing Panel (Table 1500 mm(W) x 900

Furniture 2 Compartment Service Droppers In Lab 300Mm L X

Reagent Rack Island Table:3 Tier Struct, 3Adjustable Toughened Glass Shelves -

Elect. Socket With Piano Switch 6/16Amp (Northwest/ Norisys Make)

190 With Wiring (2.5 Sq.mm FRLS) Nos. 6.00 1,105 6,630.0

High Rise Revolving Stool (seat cover will be black) - With cushion in seat & back, Metal stand with ring type footrest & castors &

Two Way Utility Tap For LPG (Far-Italy / "TOF" Italy / Broen Denmark make)

Two Way Utility Tap For Nitrogen (Far-Italy / "TOF" Italy / Broen Denmark make)

Two Way Utility Tap For Vacuum (Far-Italy / "TOF" Italy / Broen Denmark make)

Granite worktop (16 to 18 mm)

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)LHS

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)RHS

C-Frame 750 mm (D) X 900 mm(H) Table - 690 mm(L) X 850 mm(H)

198 (For Both Sides) Nos. 5.00 5,793 28,962.7

Standing Height Leg Space-770 mm(L) with Back Panel(size:-770

Standing Height Leg Space-780 mm(L) with Back Panel(size:-780

Gap Closing Panel for 'C' & 'H' frame ( - Table Height 900 mm )-

Standing Height- Gap Closing Panel (Table 750 mm(W) x 900

Signature of Contractor 25 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Elect Trunking Box Str. Single side With wiring (Wall Table)800

Elect Trunking Box Str. Single side With wiring (Wall Table)1230

Elect Trunking Box Str. Single side With wiring (Wall Table)1250

Elect. Socket With Piano Switch 6/16Amp (Northwest/ Norisys Make)

206 With Wiring (2.5 Sq.mm FRLS) Nos. 7.00 1,105 7,735.0

High Rise Revolving Stool (seat cover will be black) - With cushion in seat & back, Metal stand with ring type footrest & castors &

Granite worktop (16 to 18 mm)

Sitting Height 1 Drawer & 1 Shutter- 450 mm(L)LHS

Sitting Height 1 Drawer & 2 Shutters- 600 mm(L)

Sitting Height 1 Shutter Corner Unit:- 900 mm(L) X 900 mm (D)

C-Frame 750 mm (D) X 800 mm(H) Table - 690 mm(L) X 750 mm(H)

212 (For Both Sides) Nos. 7.00 5,793 40,547.8

Sitting Height Leg Space-600 mm(L) with Back Panel(size:-600

Sitting Height- Gap Closing Panel (Table 750 mm(W) x 800

Corner Piece Of Electrical Trunking.

Elect Trunking Box Str. Single side With wiring (Wall Table)600

Elect Trunking Box Str. Single side With wiring (Wall Table)900

Elect Trunking Box Str. Single side With wiring (Wall Table)1050

Elect Trunking Box Str. Single side With wiring (Wall Table)1200

Electrical Data Point Without Wiring

Elect. Socket With Piano Switch 6/16Amp (Northwest/ Norisys Make)

221 With Wiring (2.5 Sq.mm FRLS) Nos. 17.00 1,105 18,785.0

Cable Organizer Ø 60Mm - Black,Code - Co 60

Keyboard drawer with soft pad.

Granite worktop (16 to 18 mm)

Signature of Contractor 26 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Sitting Height 1 Drawer & 1 Shutter- 450 mm(L)LHS

Sitting Height 1 Drawer & 1 Shutter- 450 mm(L) Right

H-Frame 1800 mm (D) X 800 mm(H) I-Table - 1740 mm(L) X 750

227 mm(H) (For Both Sides) Nos. 2.00 11,585 23,170.2

Sitting Height Leg Space-600 mm(L) with Back Panel(size:-600

Sitting Height- Gap Closing Panel (Table 1800 mm(W) x 800

Elect Trunking Box Str. Two side With wiring (Island Table)1400

Furniture 2 Compartment Service Droppers In Lab 300Mm L X

Electrical Data Point Without Wiring

Elect. Socket With Piano Switch 6/16Amp (Northwest/ Norisys Make)

233 With Wiring (2.5 Sq.mm FRLS) Nos. 6.00 1,105 6,630.0

Cable Organizer Ø 60Mm - Black,Code - Co 60

Keyboard drawer with soft pad.

Granite worktop (16 to 18 mm)

C-Frame 750 mm (D) X 900 mm(H) Table - 690 mm(L) X 850 mm(H)

237 (For Both Sides) Nos. 7.00 5,793 40,547.8

Gap Closing Panel for 'C' & 'H' frame ( - Table Height 900 mm )-

Wall Mounted Overhead File Cabinets (Float Glass Door) CRCA Structure 2 Shutter with 1 adjustable shelf Size -750 mm (L) x

High Rise Revolving Stool (seat cover will be black) - With cushion in seat & back, Metal stand with ring type footrest & castors &

Standing Height Modesty Panel (Table 900 mm(H))- 1000 mm(L) x

Granite worktop (16 to 18 mm)

C-Frame 750 mm (D) X 900 mm(H) Table - 690 mm(L) X 850 mm(H)

243 (For Both Sides) Nos. 7.00 5,793 40,547.8

Gap Closing Panel for 'C' & 'H' frame ( - Table Height 900 mm )-

Wall Mounted Overhead File Cabinets (Float Glass Door) CRCA Structure 2 Shutter with 1 adjustable shelf Size -750 mm (L) x

Signature of Contractor 27 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

High Rise Revolving Stool (seat cover will be black) - With cushion in seat & back, Metal stand with ring type footrest & castors &

Standing Height Modesty Panel (Table 900 mm(H))- 1000 mm(L) x

Granite worktop (16 to 18 mm)

C-Frame 750 mm (D) X 900 mm(H) Table - 690 mm(L) X 850 mm(H)

249 (For Both Sides) Nos. 7.00 5,793 40,547.8

Gap Closing Panel for 'C' & 'H' frame ( - Table Height 900 mm )-

Wall Mounted Overhead File Cabinets (Float Glass Door) CRCA

251 Structure 2 Shutter with 1 adjustable shelf Size -750 mm (L) x 375 mm (D) x 675 mm (H) Nos. 4.00 10,763 43,053.6

High Rise Revolving Stool (seat cover will be black) - With cushion in seat & back, Metal stand with ring type footrest & castors &

Standing Height Modesty Panel (Table 900 mm(H))- 1000 mm(L) x

Granite worktop (16 to 18 mm)

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)LHS

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)RHS

Standing Height 2 Shutters Sink Unit - 750 mm(L)

H-Frame 1800 mm (D) X 900 mm(H) I-Table - 1740 mm(L) X 850

258 mm(H) (For Both Sides) Nos. 6.00 11,585 69,510.5

Gap Closing Panel for 'C' & 'H' frame ( - Table Height 900 mm )-

Standing Height- Gap Closing Panel (Table 1800 mm(W) x 900

Furniture 2 Compartment Service Droppers In Lab 300Mm L X

Reagent Rack Island Table:3 Tier Struct, 3Adjustable Toughened Glass Shelves -

Reagent Rack Island Table:3 Tier Struct, 3Adjustable Toughened Glass Shelves -

Elect. Socket With Piano Switch 6/16Amp (Northwest/ Norisys Make)

264 With Wiring (2.5 Sq.mm FRLS) Nos. 18.00 1,105 19,890.0

Hand Held Eye Wash Single Bulk ( Broen )

High Rise Revolving Stool (seat cover will be black) - With cushion in seat & back, Metal stand with ring type footrest & castors &

Signature of Contractor 28 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

Big PP Sink - 600L X 450W X 300D mm

Three Way Water Tap-Gooseneck Type (Far-Italy / "TOF" Italy / Broen Denmark)

Two Way Utility Tap For LPG (Far-Italy / "TOF" Italy / Broen Denmark make)

Two Way Utility Tap For Nitrogen (Far-Italy / "TOF" Italy / Broen Denmark make)

Two Way Utility Tap For Vacuum (Far-Italy / "TOF" Italy / Broen Denmark make)

Standing Height Modesty Panel (Table 900 mm(H))- 1000 mm(L) x

Granite worktop (16 to 18 mm)

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)LHS

Standing Height 1 Drawer & 1 Shutter- 450 mm(L)RHS

C-Frame 750 mm (D) X 900 mm(H) Table - 690 mm(L) X 850 mm(H)

276 (For Both Sides) Nos. 6.00 5,793 34,755.3

Standing Height Leg Space-630 mm(L) with Back Panel(size:-630

Standing Height Leg Space-660 mm(L) with Back Panel(size:-660

Gap Closing Panel for 'C' & 'H' frame ( - Table Height 900 mm )-

Standing Height- Gap Closing Panel (Table 750 mm(W) x 900

Elect Trunking Box Str. Single side With wiring (Wall Table)1110

Elect Trunking Box Str. Single side With wiring (Wall Table)1200

Elect. Socket With Piano Switch 6/16Amp With Wiring (2.5 Sq.mm FRLS)

Wall Mounted Overhead File Cabinets (Float Glass Door) CRCA Structure 2 Shutter with 1 adjustable shelf Size -750 mm (L) x 375

Wall Mounted Overhead File Cabinets (Float Glass Door) CRCA Structure 2 Shutter with 1 adjustable shelf Size -600 mm (L) x

High Rise Revolving Stool (seat cover will be black) - With cushion in seat & back, Metal stand with ring type footrest & castors &

One Way Utility Tap For LPG

Signature of Contractor 29 of 30 NBCC India Ltd.

Supply, Installation Commissioning and placement of Furniture work under Pkg-VI for NIT Delhi Campus under Phase-I,NITD Narela Delhi”

One Way Utility Tap For Nitrogen

One Way Utility Tap For Vacuum

Total Amount Basic 6,65,76,394.0

Total Amount Basic 6,65,76,394.0

GST will be extra @ 18% 1,19,83,751

Total amount including GST 7,85,60,145

Total amount including GST 7,85,60,145

Signature of Contractor 30 of 30 NBCC India Ltd.