COMPREHENSIVE MAINTENANCE OF DEFECTIVE ITEMS OF INTERNAL ELECTRIFICATION IN VIMAN NAGAR, CHANDAN NAGAR, AKASH NAGAR AND BURMA SHELL IN 2 WING AND REPAIR MAINTENANCE OF DEFECTIVE ITEMS OF FIRE ALARM SYSTEM IN 2 WING AFS PUNE UNDER GE (AF) LOHEGA

Amount

M&L for Carrying out day to day comprehensive maintenance of domestic area [(i)Viman Nagar and Chandan Nagar SMQ other Domestic Bldgs, (iii) Akash Nagar and Burma Shell SMQ and other Buildings] internal eletrification complaints by Collecting from complaints cell daily between 9.00 am to 10.00 am and repairs in situ or attending of complaints of domestic area. After rectification the specified complaint job card shall be returned on same date. Nature of defects such as repair/replacement of switches, fuse wires, DB, MCB (light/ power), lamp holder (bracket, pandent, batten) bell/buzzer, push button, ceiling rose, capacitors and other similar electrical items/fittings, repairing of fan and geysers etc including providing electrical connection using pvc copper cable of size 1.5 sqmm to 10 sqmm single core/ two core and length not exceding 1.5 mtrs complete all as specified and directed. (Note :- any accessories as mentioned above found unserviceable shall be measured and paid separately under respective items of this Sch. However any minor requirement essential for making overall system serviceable is deemed to be included in the quoted rate of this item.)

Note for Ser Item No 1.00 : (i) Contractor shall provide his representative’s authorized contact No (i.e) Cell / Mobile no and local address to contact and communicate the message of any breakdown/complaint. Contactor’s representative shall visit the Office to collect day to day complaints of any nature/type. For essential services, Contractor’s representative shall be available 24x7 to attend complaint as called upon by Engr-in Charge. (ii) Penalty for not rectifying the defect in given time shall be charged to contractor at the rate of ₹100 per complaint from due payment of works/RAR/Final bill.Manpower requirement for attending and completing day to day complaints may vary day to day and cost of same shall deemed to be included in the quoted rate.Contractor is advised to quote accordingly. (iii) Complaints shall be treated as rectified only after production of user’s “Satisfactory Job Slip duly signed” to Engr-in-Charge. (iv) Old material obtained from replaced items under this item shall be contractor's property and shall be measured as Schedule of credit and shall be Issued to contractor at the time of RAR payments. (v) Cost of minor spares i.e, insulation tape, lugs, thimbles etc are deemed to be included in the quoted rate. Labour required to carryout the maint / repairs including testing and commissioning shall be deemed to be included in item rate as quoted by the contractor.Items replaced shall be measured and paid seperately. (vi) Cost of T&P i.e, ladders, tools, brazing, welding, soldering required and transportation is deemed to be included in quoted rates. (vii) Making good the area / cleaning the area will be mandatory for the contractor & failing which penalty of Rs. 50/- shall be charged. (viii) Separate team of manpower shall be provided for Viman Nagar/Chandan Nagar, Akash nagar, burma shell regularly as directed by Engineer-in-Charge according to requirement. (ix) Complaints of one SMQ (Md Accn) on one job card/per day will be considered as one complaint irrespective of number of defects rectified/accessories replaced. (x) Complaints of OTM Bldgs will be considered as one unit on replacement upto five accessories/rectifications upto five defects

M & L for repair/replacement of the following items if required against Ser Item No.1.00

Supply and fix switch piano flush type 5 A one way complete all as specified and directed.

Supply and fix socket 2 in one 5 Pin 5 Amps complete all as specified and directed.

Supply and fix switch socket combination multipurpose 3 pin 6/16 Amps complete all as specified and directed.

Supply and fix switch socket combination multipurpose 3 pin 5 Amps complete all as specified and directed.

Supply and fix switch piano flush type 15 Amps complete all as specified and directed.

Supply and fix Socket out let 2 in 1, 3 pin 5 and 15 Amps complete all as specified and directed.

Supply and fix Piano switch bell push type switch 5 A complete all as specified and directed.

Supply and fix bell electric 230V single pole complete all as specified and directed.

S & F Fan Regulator electronic step type 100 W complete all as specified and directed.

S&F angle / batten holder insulated body with back plate for batten fittings complete all as specified and directed.

Supply and fix ceiling rose surface type bakelite/PVC three terminal 65x50mm complete all as specified and directed.

S & F Modular switch 1 way 6A, 1 module matching to as existing on site complete all as specified and directed.

S & F Modular switch 1 way 16A, 1 module vmatching to as existing on site complete all as specified and directed.

S & F Modular Bell push 1 module, 5 amp matching to as existing on site complete all as specified and directed.

S & F Modular socket 6 A 2 module matching to as existing on site complete all as specified and directed.

S & F Modular socket 16 A 2 module matching to as existing on site complete all as specified and directed.

S & F Modular Fan Regulator 120W 2 module matching to as existing on site complete all as specified and directed.

S & F modular cover plate with frame 4 module matching to as existing on site complete all as specified and directed.

S & F modular cover plate with frame 6 module matching to as existing on site complete all as specified and directed.

S & F modular cover plate with frame 8 module matching to as existing on site complete all as specified and directed.

S & F modular cover plate with frame 3 module matching to as existing on site complete all as specified and directed.

S & F PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed.

Ditto all as per Ser Item No. 24.00 above but 175 x 100 x 50 mm complete all as specified and directed.

Ditto all as per Ser Item No. 24.00 above but 200 x 150 x 50 mm complete all as specified and directed.

Fixing only and connecting electric meters Issued Under Sch "B" free for fixing including taking down old meters.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix high quality indoor Surface and wall mounted LED batten 20 Watt, provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver having THD<10%. complete with all accessories internally pre-wired and including connecting up with three core 0.5 Sqmm flexible copper conductor cable ceiling rose to fitting terminal complete all as specified and directed.

Supply and fix Energy efficient recess mounted LED panel fitting 36 Watt suitable for 2x2 grid in white colour with high quality diffuser for uniform light & high Efficiency. Made from CRCA sheet, Pre-coated white color. Separate replaceable electronic driver, lumen constant of 5700/6500K colour temperature with current electronic connections complete all as specified and directed.

Supply and fix sheet metal enclosure MCB DB double door SPN 12 way 230 V with neutral link and with 200 A bus bar complete all as specified and directed.

Supply and fix sheet metal enclosure MCB DB double door SPN 8 way 230 V with neutral link and with 200 A bus bar complete all as specified and directed.

Supply and fix sheet metal enclosure MCB DB double door SPN 4 way 230 V with neutral link and with 200 A bus bar complete all as specified and directed.

Supply and fix MCB SPN 40 Amp, 230 volt 'C' series complete all as specified and directed.

S&F MCB SP 240 volt 6 to 32 A 'C' series complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 225/230 mm sweep with, blades, and frame and louver complete all as specified and directed.

Supply and fix wall fan AC single Phase. 230V of size 400 mm sweep complete all as specified and directed.

S & F Electronic Ballast suitable for 1x 36/40 Watt tube light fitting complete all as specified and directed.

S & F Electronic Ballast suitable for 1x 28 Watt tube light fitting complete all as specified and directed.

S & F LED PL Tube 18 Watt 4 pin suitable for any type fitting as required on site complete all as specified and directed.

S & F LED retrofit tube in built driver suitable for T-5 Tube light fitting 4 feet long complete all as specified and directed.

S & F LED retrofit tube in built driver suitable for T-8 Tube light fitting 4 feet long complete all as specified and directed.

S & F Tube rod 36 Watt complete all as specified and directed.

S & F Tube rod 28 Watt complete all as specified and directed.

S&F in replacement bipin holder rotary type suitable for T8/T8 FTL Lamp complete all as specified and directed.

M & L for sub main wiring with two runs of single core 4.0 Sq mm FRLS PVC insulated unsheathed multi stranded copper conductor 650 / 1100 V grade with colour code and one run of 2.5 Sq mm ( 22 / 0.3 mm ) single core FRLS PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor including PVC casing & caping complete all as specified and directed. ( Note :Two runs of 4.0 Sqmm copper cable,one run of earth wire of 2.5 Sqmm copper cable shall be measured & paid as one length.)

M & L for sub main wiring with two runs of single core 6.0Sq mm Flame retardant PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 4.0 Sq mm single core Flame retardant PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor drawn in & including casing & caping complete all as specified and directed. ( Note:- Two runs of 6 Sqmm copper cable & one run of 4 sqmm copper cable including PVC casing & caping shall be measured & paid as one length )

M & L for sub main wiring with two runs of single core 10.0Sq mm Flame retardant PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 6.0 Sq mm single core Flame retardant PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor drawn in & including casing & caping complete all as specified and directed. ( Note:-Two runs of 10 Sqmm copper cable & one run of 6 sqmm copper cable including PVC casing & caping shall be measured & paid as one length )

Ditto all as per Ser Item No. 46.00 above but 2x1.5 sq. mm + 1x1.0 sq. mm as earth wire complete all as specified and directed.

Ditto all as per Ser Item No. 46.00 above 2 x2.5 sq. mm + 1x1.50 sq. mm as earth wire complete all as specified and directed.

S & F PVC Casing & Capping with connected accessories

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed.

Taking down ceiling fan single phase 240 V 1200 mm /1400mm sweep from the existing position including disconnecting supply cable from ceiling rose / connector opening ceiling fan carefully and taking out worn out/defective spare parts such as bearing/ bush shaft , blades, split pin condenser rubber reel nuts and bolts and washer etc cleaning and washing the bearings /bushs thoroughly and applying necessary lubricants etc and reassembling of ceiling fan after replacement of wornout parts and hanging in original position connecting and testing complete all as specified and directed. [Note :- Replacement of spares for ceiling fan shall be measured and paid seperately]

Ditto all as per Ser Item No 53.00 above but for exhaust fan 300 / 450 mm sweep complete all as specified and directed.

Ditto all as per Ser Item No 53.00 above but for wall mounting fan any sweep complete all as specified and directed.

Supply and fix ball bearing SKF 6201 complete all as specified and directed.

Supply and fix ball bearing SKF 6202 complete all as specified and directed.

Supply and fix ball bearing SKF 6203 complete all as specified and directed.

S&F Gunmetal bush suitable for existing fans complete all as specified and directed.

Supply and fix capacitor 2.5 Mfd /3.15 mfd complete all as specified and directed.

Supply and fix capacitor 4 Mfd complete all as specified and directed.

Supply and fix rubber reel with nuts bolts and split pin for ceiling fan complete all as specified and directed.

Supply and fixing PVC unsheathed 3 core cable copper flexible wire 0.5 Sqmm size complete all as specified and directed.

M&L for rewinding of ceiling fans of 1200 / 1400 mm sweep with suitable size of copper winding wire of same gauge & number of turns complete all as specified and directed.

M&L for rewinding of exhaust fans of 300 / 380 / 450 mm sweep with suitable size of copper winding wire of same gauge & number of turns complete with insulation complete all as specified and directed.

M&L for rewinding of wall fans of 400 mm sweep with suitable size of copper winding wire of same gauge & number of turns complete with insulation complete all as specified and directed.

S&F fan clamp suitable for ceiling fan complete all as specified and directed.

S&F fan blade suitable for existing wall mounting fan / exhaust fan complete all as specified and directed.

Taking down Geyser 25/50 Ltrs from the existing position including disconnecting supply cable from connector opening geyser carefully and taking out worn out/defective spare parts such as Thermostat, appratus terminal plate, glass wool, element etc cleaning and reassembling of geyser after replacement of wornout parts and hanging in original position connecting and testing complete all as specified and directed. [Note :- Replacement of spares for geyser shall be measured and paid seperately]

Supply and fix thermostat suitable for geyser of any make and any size complete all as specified and directed.

Supply and fix indicating neon lamps suitable for geyser of any make complete all as specified and directed.

Supply and fix apparatus terminal plate assembly with provision of inlet and outlet copper tubing including nuts bolts and washers suitable for geyser of any type complete all as specified and directed.

Supply and fix PVC connecting pipe heavy duty 15 mm dia for inlet and outlet with brass coupling complete all as specified and directed.

Supply and fix for glass wool suitable for any type and make for geyser complete all as specified and directed.

Supply and fix geyser element 250 V 1.5 KW suitable for 25 ltrs capacity complete all as specified and directed.

Supply and fix geyser element 250 V 2 KW suitable for 25/50 ltrs capacity complete all as specified and directed.

S&F Syphene assembly on existing geyser suitable for 25 Ltrs Geyer complete all as specified and directed.

Supply & fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cables stranded conductor flat or circular 6 Sqmm complete all as specified and directed.

Supply & fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cables stranded conductor flat or circular 10 Sqmm complete all as specified and directed.

M & L for comprhensive maintenace of Fire alarm system installed at various Tech Bldgs of 2 Wing. comprehensive maintenance the following works including Note:- (i) The maintenance cost of fire alarm system shall deemed to comprises of cost of labour employed for the purpose, T&P used and other petty items such as batteriess and other cleaning materials etc. (ii) Servicing shall be carried out authorised dealer of manufacturer i.e. OEM. (iii) Non attending the complaint with in 3 days @ Rs. 500.00/day shall be recovered for the fourth day by the contractor. (iv) Keeping the complaint pending after fourth day @ Rs. 1000.00/day shall be recovered for the fourth day by the contractor. (v) The complaint shall be generated by Telephonically/Verbally by concern JE E/M or Engr-Incharge.

(vi) Servicing of quaterly basis of fire alarm system installed in following Bldgs including first hand repairs, consisting of normal repairs and cleaning of all components such as smoke detectors/manual call point/sounder/translator/expendor / input/output module etc of any type installed in Bldgs using proper method and tools , replacement of unserviceable Battries of connected system , tightening of all connections as required including replacements of defective spares and required calibration of control pannel and connected items check and maintain the system for efficent functiong of intire system, including troubleshooting and clearance of all faults from the panel.Testing of EachFire alarm system in presence of User and MES Rep and give quaterly basis servicibility report duly signed by user and Engr-in-Charge comlete all as specified & directed in all respect. Note : Major Items if required for Repair shall be measured & paid separately under respective item. (a) Base Ops (b) FSS (avoinic lab) (c) Tech Fly Hanger (d) 30 Sqd Hanger (e) JTF Hanger (f) 20 Sqd Hanger (g) 31 Sqd Hanger (h) RT Cabin (j) GCA Bldg (k) Logistic Bldg (l) SRE Tower (m) SMC (n) SSC (o) LDP Lab Bldg (p) Simulator (q) PTT (r) Fire Stn (s) Guruth complex (t) PAR Bldg

Taking down exising Fire Alarm system panel repair/repailacement unserviceablle part including mother board , display, power supply & bettery of microprocessor based networkable Analogue Addressable fire Alarm control panel completed all as specified and directed by Engr in Charge.

Taking down exising Fire Alarm system panel in replacement S&F Fire alarm control panel complying with BS EN 54 Single loop panel of capacity from 99 detectors & 99 modules upto 200 detector and modules

Taking down exising Fire Alarm system panel in replacement S&F Supply, Installation Testing & Commissioning of microprocessor based Networkable Analogue Addressable Fire Alarm Control Panel. The Panel shall be compliant with EN54-2, EN54-4 and approved by LPCB. The Panel must have Full colour 800 x 480 LCD with resistive touch screen and automatic backlight dimming. The Panel must also have the capability to take Addressable Intelligent Wired and Wireless Devices on same loop. Eachloop shall have a capacity of 127 analogue Addressable devices and 127 Base sounders/Base Sounder Beacons. The panel shall have an event log of minimum 10,000 events @ 1 second resolution, Filterable and Printable. The Panel shall have Three access levels. Panel shall support upto 5000 Cause & Effects entries, with upto 20,000 inputs controlling & 20,000 Controlling outputs across the network. The Panel shall have capability for Peer to Peer networking through RS485 network card. The Panel must have 4 inbuilt programmable sounder circuits, Eachcircuit rated at 2.5A.The Panel must have inbuilt 3 programmable inputs and 5 inbuilt programmable relay outputs. The Panel shall have up to sub-addressable 512 programmable Inputs/Outputs via optional RS485 COMMS serially connected expansion cards. The panel shall have zone indicator ranging from 0 to 144. The Panel shall have 240 V AC power supply along with automatic Battery Charger. The Panel shall be fully expandable via common plug in loop driver boards. The user shall have a choice of using the panel with 5.25 Amp or 10.25 Amp power supply unit which is inbuilt in the FACP and should be approved to EN54-4. The Panel shall have configurable via USB port to PC or SD card slot. The Panel shall have dedicated RS232 serial port for optional printer. complete all as specified and directed by Engr-in-Charge.

Taking down exising Beam Detector in replacement S&F Supply, Installation, Testing and Commissioning of Approved Projected Beam Detector Complete set with required module (100mtrs)• Should be Microprocessor based complete all as specified and directed by Engr-in-Charge. • Signal strength LED's • Should Provide linear protection • Automatic compensation for signal drift or dirty lens • Minimum Three field adjustable sensitivity settings • Form A alarm and Form B trouble contacts • Calibrated filters shall be vailable to verify sensitivity • Emitter and Receiver type

Taking down carefully from trench/wall/roof/trench of hanger/building loose/hanging/deshaped of any size unserviceable cable etc complete all as specified and as directed.

Material and labour for supply and fix armored fire cable copper conductor of size 2 Core 1.5 sqmm two core FRLS in Red colour fixed on wall / roof with GI saddle complete all as specifed and directed by Engineer-in-Charge at site Make: Finolex/Havells/Polycab

Taking down old unserviceable/damage from roof & wall of the hanger/building in replacement Supply, Installation, Testing and Commissioning of Hybrid Wireless Optical Smoke Sensor with Bi-directional wireless communication, Self optimising wireless amplitude and frequency, in-built magnet test, operating on 865-868 MHz with communication range up to 1000 m in open air, 95% RH (non condensing), Primary & Secondary Power Supply LPCB Approved, Approved to EN54-7 & 25B. complete all as specifed and directed by Engineer-in-Charge.

Taking down old unserviceable/damage from roof & wall of the hanger/building in replacement Supply, Installation, Testing and Commissioning of Compatible Batteries for above type of detectors to be used in existing system installed. complete all as specifed and directed by Engineer-in-Charge

Taking down old unserviceable/damage from roof & wall of the hanger/building in replacement Supply, Installation, Testing and Commissioning of Hybrid Wireless Translator Module with Bi-directional wireless communication, Self optimising wireless amplitude and frequency, Loop Powered, allows the connection of up to 126* radio field devices to an addressable fire detection loop, Incorporates a Loop Short Circuit Isolator and an OLED display, operating on 865-868 MHz with communication range up to 1000 m in open air, 95% RH (non condensing), RED compliant, LPCB Approved, Approved to EN54-17, 18 and 25. complete all as specifed and directed by Engineer-in-Charge.

Taking down old unserviceable/damage from roof & wall of the hanger/building & Supply, Installation, Testing and Commissioning of Hybrid Wireless Expander Module with Bi-directional wireless communication, Self optimising wireless amplitude and frequency,Up to 126 Expander Modules may be configured to any one Translator Module, Supports MESH communications, operating on 865-868 MHz with communication range up to 1000 m in open air, 93% RH (non condensing), RED compliant, LPCB Approved, Approved to EN54-18 and 25. complete all as specifed and directed by Engineer-in-Charge.

Taking down old unserviceable/damage from roof & wall of the hanger/building & Supply, Installation, Testing and Commissioning of Hybrid Wireless Manual Call Point with Bi-directional wireless communication, Self optimising wireless amplitude and frequency, Resettable Element, fully addressable and intelligent monitoring functionality operating on 865-868 MHz with communication range up to 1000 m in open air, 95% RH (non condensing), Up to 10 year battery life Dependant on operational usage, Primary & Secondary Power Supply, LPCB approved, Approved to EN54-11 & 25. complete all as specifed and directed by Engineer-in-Charge.

Taking down old unserviceable/damage from roof & wall of the hanger/building & Supply, Installation, Testing and Commissioning of Hybrid Wireless Sounder with Bi-directional wireless communication, Self optimising wireless amplitude and frequency, 4 Tone Settings, fully addressable and intelligent monitoring functionality operating on 865-868 MHz with communication range up to 1000 m in open air with Max. sounder output 93 dB(A) @ 1 metre, 95% RH (non condensing), Up to 10 year battery life Dependant on operational usage, Primary & Secondary Power Supply, LPCB approved, Approved to EN54-3 and 25. complete all as specifed and directed by Engineer-in-Charge.

Taking down old unserviceable/damage from existing Fire Alarm system panel and Supply & Installation, Testing and Commissionig of Sealed lead Acid Battery CS 7-12, 12 V, 7 AH Chrge parameters, Constant Voltage Charge with voltage reguation (27 degree C) stanby use 13.6V -13.8V, cycle use -14.1 V-14.4V, Max initia current 1.4 A suitabe for Existing fire Alarm panel complete all as specified and directed by Engineer -in-Charge

Taking down old unserviceable/damage from existing and Supply & Installation, testing and commissioning Hybrid wireless input/output modle with BI directioal wireless cummunication self optimisng wireless communication self optimising wireless aplitude frequency upt oto radio field deice iput/output module an addressable fire ditection loop operating on 865-860 MHZ with commuication rage up to 100 m in open air 95% RH (Non condensiing LPCB PCB approved to EN54.

Shree Ayyappa Engineering

M/S SOMANATH ENTERPRISES

cooltech engineering services