Krishnagiri Dt Mathur Block Mines and Minerals 2025-26 1 Work of Providing Cupboard with UPVC partitions to union office Building First Floor at Mathur Block Package No 2025-26 MTR 24

1.Providing Cupboard with UPVC partitions to union office Building First Floor at Mathur Block. Estimate Cost (42,32,000.00)

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work

The supply and installation of UPVC partitions with doors shall utilize UPVC profile sections with an outer wall thickness of 2.30mm ($0.2mm), featuring an outer frame of 74mm x 60mm x 56mm, a shutter of 104mm x 60mm x 66mm, a mullion of 72mm x 60mm x 36mm, a glazing bead of 35mm x 18mm, a 20mm multi-chambered hollow uPVC panel section of 150mm x 20mm, and a uPVC panel bead of 19mm x 16mm. Al profiles of frames, sash, and mullion shall be reinforced, where required, with 1mm thick GI steel sections.The door will be equipped with 3D hinges for enhanced weight holding capacity, and security devices such as multipoint lock systems with a cylinder lock facilitate d handle, all compliant with relevant specifications and departmental directives . GlazingoUPVC panels shall be 5 m m thick Plain Toughened o r uPVC panel grip, held by TPE (Grey) weather-sealed gaskets. All corners and mullion joints of the frame and sash shall be mitred cut and fusion weld ed with out mechanical joints , with all welded joints neatly trimmed to a grooved nib finish,the complete units shal be fixed into pre-finished penies.by drilling and fastening through the outer frame using high- quality fasteners, and silicon sealant shall be applied to fillthe gap between the wall and the frame for a leak- proofinstallation and completion etc., Complete and as directedby the department officers. SOR 2025-26

Provision for writing Name board

Provision for Photographics charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Please Enable Macros to View BoQ information