STRUCTURAL_PIPELINE PAINTING@IPN

STRUCTURAL PAINTING — INTING OF STRUCTURAL MEMBERS LIKE LADDERS,PLATFORMS, WALKOVERS ETC: PAINTING SHALL BE DONEAS PER SPECIAL INSTRUCTIONS FOR PAINTI ATTACHEDIN TENDER DOCUMENT. PRICES TO BE QUOTED IN PERSQM BASIS. THIS ITEM INCLUDES SUPPLY OF PAINTALSO.

PAINTING OF GRATING — INTING OF GRATING: 1) SCOPE OF JOB:SURFACEPREPARATION TOTAL SURFACE PAINTING OF MILD STEELSURFACE OR MILD STEEL GRATING IN THE T K FARMAND OTHER AREAS WITH VARIOUS SIZES AND VARIOUSCOLOURS FOR EG. VALVES, MOVS ETC AS PER DIRECTIONOF ENGINEER IN CHARGE. PA TING SYSTEM:MILD STEELSURFACE SURFACE PREPARATION:MANUAL CLEANING/POWERTOOL CLEANING ST2 CONTRACTOR HAS TO ENSURE THATTHE SURF E IS CLEAN FROM ALLSCALES/RUST/DUST/GREASE/OILS/PAINT WRAPS ETC. ANDPERFECTLY SUITABLE TO APPLY THE PRIMER AFTERSURFACE PREPAR ION CONTRACTOR HAS TO GET THEAPPROVAL FROM THE ENGINEER-IN-CHARGE. BEFOREAPPLYING PRIMER. 2) SCOPE OF JOB:ONE COAT-BERGERPROTE OMASTIC OR EQUIVALENT PAINT-1 X 100 MICRONTOTAL SURFACE PAINTING OF MILD STEEL SURFACE ORMILD STEEL GRATING IN THE TANK FARM AND THERAREAS WITH VARIOUS SIZES AND VARIOUS COLOURS ASPER DIRECTION OF ENGINEER IN CHARGE. PAINTINGSYSTEM: MILD STEEL SURFACE AFT SURFACEPREPARATION AND CLEARANCE FROM ENGINEER IN CHARGEONE COAT - BERGER PROTECTOMASTIC OR EQUIVALENTPAINT - 1 X 100MICRON H TO BE APPLIED DFTREPORT OF THE SAME TO BE SUBMITTED AFTERCOMPLETION OF THIS COAT FOR APPROVAL. IF THEREQUIRED THICKNESS OF TH SAME IS NOT MET,CONTRACTOR HAS TO PAINT UNTIL 100 MICRON ISACHIEVED. 3)SCOPE OF JOB:APPLICATION OF ONECOAT-EPILUX 4 HB MIO CTG R EQUIVALENT PAINT-1 X100 MICRON TOTAL SURFACE PAINTING OF MILD STEELSURFACE OR MILD STEEL GRATING IN THE TANK FARMAND OTHER A AS WITH VARIOUS SIZES AND VARIOUSCOLOURS AS PER DIRECTION OF ENGINEER-IN- CHARGE.PAINTING SYSTEM:MILD STEEL SURFACE AFTERSATISF TORY 100 MICRON ONE COAT OF BERGERPROTECTOMASTIC OR EQUIVALENT PAINT (DFT REPORT),ONE COAT-EPILUX 4 HB MIO CTG OR EQUIVALENT PAI TO BE APPLIED DFT REPORT AFTER APPLICATION OF ONECOAT-EPILUX 4 HB MIO CTG OR EQUIVALENT PAINT TOBE SUBMITTED FOR APPROVAL, IF E REQUIREDTHICKNESS OF THE SAME IS NOT MET, CONTRACTOR HASTO PAINT UNTIL 100 MICRON IS ACHIEVED AS PER DFTREPORT. 4) SCOPE OF B:APPLICATION OF ONECOAT-BERGERTHANE PU GLS FINISH OR EQUIVALENTPAINT-35 MICRON X 2 COATS TOTAL 70 MICRONS TOTALSURFACE PAINTI OF MILD STEEL SURFACE OR MILDSTEEL GRATING IN THE TANK FARM AND OTHER AREASWITH VARIOUS SIZES AND VARIOUS COLOURS AS PERDIREC ON OF ENGINEER-IN-CHARGE. PAINTINGSYSTEM:MILD STEEL SURFACE. AFTER SATISFACTORY 100MICRON ONE COAT OF EPILUX 4 HB MIO CTG OREQ VALENT PAINT, ONE COAT OF 35 MICRONBERGERTHANE PU GLS FINISH OR EQUIVALENT PAINT- 35MICRON TO BE APPLIED. DFT REPORT AFTERAPPLI TION OF ONE COAT 35 MICRON BERGERTHANE PUGLS FINISH OR EQUIVALENT PAINT TO BE SUBMITTEDFOR APPROVAL, IF THE REQUIRED THICKNESS O THESAME IS NOT MET, CONTRACTOR HAS TO PAINT UNTIL 35MICRON IS ACHIEVED AS PER DFT REPORT. THE TOTALQUANTITY IN THIS ITEM IS RE IRED TO BE PAINTEDAS TWO COATS, FOR EXAMPLE IF 100 SQUARE METER ISTHE QUANTITY-TWO COATS OF 35 MICRON TO BE PAINTEDAND TOTAL F AL THICKNESS SHOULD BE 70 MICRONS.

SUP & PAINTING - PLPL — PELINE PAINTING: PAINTING SHALL BE INCLUSIVE OFSUPPLY AND APPLYING. IT INCLUDES THE PIPELINESURFACE PREPARATION ST. 2 AS PER SW ISHSTANDARD SIS-05-5900-1967 OR EQUIVALENT, SANDBLASTING, PIPELINE PAINTING BY HIGH BUILD EPOXYPAINT (2 X 100 MICRON DFT- FIRS COAT) ANDPOLYURETHANE (2 X 40 MICRON DFT- FINAL COAT).PAINT SHALL BE OF APPROVED MAKE ONLY AND AS PERTHE LIST OF APPROVED VEND S.