Water Supply Scheme Raju Bela etc (4 Nos), Block Kahnuwan, District Gurdaspur UNDER PRWSSIP 2A (i) Jal Jiwan Mission (JJM)

Amount

Repair & White Wash of Pump Chamber

Dismantling cement Concrete plan 1:2:4, 50mm thick

Conglomerate floor 50mm thick cement concrete rate 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling

Hollock wood doors shutter windows including Hinges, Screws, Chocks Cleats, Stops and Cords etc. complete fixed in position (double Leaf) @ Paneled glazed or glazed and paneled

Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint

Painting two or more coats excluding priming coat with synthetic enamel ready paint in all shades on wood work metallic or plastered,concrete surface to give an even shade

Supply & fixing of pressed steel frames (chowkats) consisting of 18 gauge (1.25mm thick steel sheet of specified section standard design latest) including iron lugs (hold fasts) for iron hings conforming to PWD specification including bolts for fixing stops lock, netch bolts, hydraulic spring and finished with one priming coat of approved quality fixed in position including cost of cement concrete 1:3:6 for filling in the frame and cement concrete for 1:2:4 for lugs complete.

White washing 3 coats inside of pump chamber.

Finishing wall with exterior decorative cement based paint such as snowcem robbiacem etc. two or more coats to give even shade. ”

Providing and fixing of Glass strips 4mm thick in floors

50mm wide

40mm wide

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete. Inside pump Chamber.

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade.

Supplying & fixing glass panes with glazing clip and special metal sash putty of approved make.

Construction of Plinth Protection of OHSR 100000 capacity

Repair of Expansion Joints of OHSR 100000 ltr capacity (150mm i/d)

Providing & fixing MS sign Board as per DWSS standard design and analysis.

Disinfection Unit:

Providing Installing testing and commissioning and one no. electronically actuated, diaphragm operated, metering system, chemical dosing chlorinator, suitable for delivering 0.5 to 6 leter of bleaching powder solution /sodium hypo solution per hrs under maximum deliver pressure upto 7kg/cm2 and suction left not less than 1.5 meter. ( Milton Roy or Equivalent Make )

Providing & Fixing Automatic Control Device Complete in all respects

Providing, laying, Fixing, jointing, cutting & testing of uPVC Pipes & Specials (6 kg./cm2) including cost of excavation complete in all respects as per ISI-4985 standard analysis.

Excavation with Manually

uPVC Pipe 90 mm o/d

Provision for connecting new pipe line with existing pipe line complete in all respects

Providing & fixing C.I D/F S.V. including cost of tail piece, rubber insertion, gland dori, Nut bolts & accessories complete in all respects.

Consturction of masonary Sluice valve chamber excluding Sluice valve cover as per standard design & drawings of pubic health department.

(a) Size 0.6 m. x 0.6 m.

Dismantling and restoration Cement Concrete complete in all respect as per DWSS standard approved analysis.

Dismantling and restoration of Interlock tiles complete in all respect as per DWSS standard approved analysis.

Water Connection on New pipe line

Providing proposed water connection to house hold up to wall with providing laying , jointing, testing MDPE pipe line 15mm o/d 2 mtr & GI 15mm i/d 4.50 mtr, including cost of specials such as tees, bends, sockets, elbow etc, cutting threading and testing in trenches in the ground and ISI marked 15mm i/d GN ferrule as oer IS:2692 and 3'' i/d clamp with C.I. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete with excavation

Providing proposed water connection to house hold up to wall with providing laying , jointing, testing MDPE pipe line 15mm o/d 2 mtr & GI 15mm i/d 4.50 mtr, including cost of specials such as tees, bends, sockets, elbow etc, cutting threading and testing in trenches in the ground and ISI marked 15mm i/d GN ferrule as oer IS:2692 and 3'' i/d clamp with C.I. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete with excavation in CC Streets