CWE/FZR-25/2022-23 Special repair to bldg No E-19 OR living at Rajput and Special repair of bathroom and toilet in bldg No P-1 K block OR living accn of Engr Regt under GE (East) Ferozepur Cantt

Amount

Demolition of un reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified.

M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in roof kerbs or mud stops, bed blocks,back filling in chowkhats, benching etc including necessary form work complete all as specified.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified.

M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in floor topping, 40mm thick, surfaces finished even and fair without using extra cement complete all as specified.

M&L for Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified.

M&L for 25 mm thick cement concrete (1:2:4) type B-1 using (20 mm graded crushed stone aggregate) as in sub base of flooring,surface finished rough to receive floor topping complete all as specified.

Dismantling floor hearth or wall/stone tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified.

M&L Non-skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and incl screed bedding 15mm thick in cm(1:6), complete all as specified.

M&L for glazed ceramic coloured tiles in vertical surfaces 300 X 200X 7 mm set and jonnted in cement slurry and pointed in white or colour set and jonnted in cement slurry and pointed in white or colour cement to match including 10mm thick back coat in CM 1:4 complete all as specified and directed.

M&L for Machine cut kota stone slab 20-25 mm thick as in flooring of size not less than 0.25 Square metre each, set and jointed in cement slurry over& including screed bed of 20 mm thick in cement mortar (1:6) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing complete all as specified.

S&F Kota stone slabs, 20 mm thick, machine cut as in shelf, skirting, steps, dado, pillars etc, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab laid over & including rendering coat of 10 mm thick in cement mortar (1:4) including rubbing, cutting and polishing, complete all as specified.

Dismantling of brick tiles single layer laid on roof jointed & pointed in cement mortar complete all as specified.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified.

M&L for Rendering 10 mm thick cement plaster on roof surfaces in cement mortar 1:3 finished fair and even without using extra cement complete all as specified

S&F 150 micron thick (transparent) polythene film with 150mm end & side laps, laid over a coat of bitumen primer @ 0.30 ltr per sqm, bonded with a coat of 80/25 industrial bitumen @ 1.20 Kg/sqm and laid on roof, complete all as specified.

M&L 80 mm thick average consolidated thickness mud phuska on flat roofs including 25 mm thick mud plaster etc complete all as specified

M&L for 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified.

All as per srl item No 17 here-in-before but using old brick tiles retrieved from dismantling (Item No 12 here-in-before) including cleaning and removal of mortar from tiles complete all as specified.

Racking out of cement joints/pointing of bricks work or brick tiles laid flat in floor surface,chanels,roofs etc complete all as specified.

M&L for Flush pointing to brick tiles / tarracing tiles laid flat on roofs in cement mortar 1:3 complete all as specified

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified.

M&L brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in c:m 1:6 complete all as specified.

All as per srl item No 22 here-in-before but using old bricks retrieved from dismantling under ser item 21 here-in-before including cleaning and removal of mortar from old bricks etc complete all as specified.

Taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for Rendering 15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and fair without using extra cement, complete all as specified.

M&L for Rendering 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair without using extra cement complete all as specified.

M&L Rendering 5 mm thick in cement mortar (1:3) on ceiling concrete surfaces finished even and smooth without using extra cement, complete all as specified.

M&L for Preparation of new plastered surfaces of ceiling & applying three coats of white wash complete all as specified

M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls etc.and applying three coats of white wash complete all as specified

M&L for Preparation of newly plastered surfaces of walls etc., and applying two coats of cement base paint over a coat of promer, complete all as specified

M&L for Complete removal of existing treatment including preparation of surfaces of walls & applying two coats of cement base paint complete all as specified

M&L for Complete removal of existing treatment including preparation of surfaces of walls & applying two coats of white wash complete all as specified

M&L for preparation of surfaces and applying one coat of exterior emulsion paint on wall, chajja, col projection and like complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and removing from site to store or otherwise as directed complete all as specified.

All as per srl item No 35 here-in-before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified.

Taking down shutters of any description,exc.1.0 sqm and not exc.2 sq. m each and after repair refixing in same opening, complete all as specified.

Taking down shutters only of any description exc 1 sqm and not exc 2 sqm each including removing from site to store or otherwise as directed complete all as specified.

S&F Factory made pressed steel frames made of 1.25 mm thick MS sheet of profile 125 mm X 60 mm for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt,hinges, hold fasts/lugs etc, treating of internal surfaces of chowkhats with coal tar or black paint including hold fasts/lugs etc complete all as specified.

S&F Factory made pressed steel frames made of 1.25 mm thick MS sheet of profile 105 mm X 60 mm for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt,hinges, hold fasts/lugs etc, treating of internal surfaces of chowkhats with coal tar or black paint including hold fasts/lugs etc complete all as specified.

S&F 35mm thick, 2nd class hard wood (Hollock), plain framed, paneled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-8 complete all as specified.

S&F 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.

S&F Factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019/08 & CEJZ/TD-1020/08”

S&F Factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing NoCEJZ/TD-1019/08 & CEJZ/TD-1020/08”

S&F Factory made box type steel ventilator with with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drg No CEJZ/TD-1019/08 & CEJZ/TD-1020/08”

S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work, conforming to Fe.290.Gde-E-165 complete all as specified.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with suitable PVC sheet beading and jointed togeather with solvent cement complete all as specified.

M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified.

M&L for Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified.

M&L for one coat of synthetic enamel paint including preparation of old painted wood or wood bases surface of any description over 10 cm.width or girth complete all as specified.

M&L for one coat of synthetic enamel paint, including preparation of old painted steel or steel bases surface of any description over 10 cm width or girth complete all as specified.

S&F PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified.

S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified.

S&F PTMT door handle, 150 mm long and fixed with steel screws complete all as specified.

S&F Mild steel door handles, stove enameled black,medium wt 125 mm long and fixed with steel screws complete all as specified.

S&F Mild steel barrel tower bolts, stove enameled black, with bright bolt, medium weight 150 mm long and fixed with steel screws complete all as specified.

S&F 300 mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12 mm dia with and including bolts and nuts complete all as specified.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

S&F 300 mm mild steel ordinary rat tail spring including roller and roller plate complete all as specified.

S&F butt hinges, 100mm long of mild steel, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

All as per srl item No 62 here-in-before but fixed in repairs

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, glazed with putty or fixed with beads complete all as specified

S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified

All as per ser item No 66 here-in-before but 20 mm bore tubing.

M&L for GI steel water tubing, 15mm bore medium grade galvanized with all fittings and fixed to walls and celling or laid in floor, complete all as specified.

All as per ser item No 68 here-in-before but 20 mm bore tubing.

Fixing only, after cleaning old steel water tubing, 15 mm bore and connections in new or old position using new fittings complete all as specified.(pipes obtained from item 67 to be reused).

All as per item No 70 here-in-before but 20 mm bore (pipes obtained from item 68 to be reused).

S&F in repair stop valves, fancy type, CP with long shank and cup (concealed type), screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed complete all as specified.

S&F in repair gun metal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe, complete all as specified.

S&F in repair gun metal gate valve of 15mm dia with iron wheel head screwed both ends for iron pipe, complete all as specified.

S&F in repair bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified.

S&F brass CP Angle cock with long shank/flange and cup (concealed type) 15 mm dia bore screwed down with crutch handle both end screwed for iron pipe or union as fixed in repairs, complete all as specified.

S&F in repair Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified.

S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified.

S&F in repair Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified.

S&F Vitreous china white wash down water closet (pedestal pattern) including PVC seat cover, Jet spray and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified.

S&F in repair PVC 10 ltr. Cap. valveless syphonic action type, flushing cistern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc. complete all as specified.

S&F in repair Vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified.

S&F in repairs urinal flat back Vitereous china (white) ,of size 465x365x265 mm with grating union for discharge pipe,spreader & 40mm dia PVC waste pipe up to floor trap complete all as specified.

S&Fin repair PTMT grating dome 100mm dia with or without waste hole fixed in repairs, complete all as specified.

S&F in repair 125 mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union, complete all as specified.

S&F Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed to walls with steel screws and wooden/rawl plugs as in repairs complete all as specified.

S&F Stainless steel soap dish (not less than 1mm thick) of type as directed,fixed to walls with chromium plated brass screws with wooden/rawl plugs,in repair complete all as specified.

Taking down eaves gutters and rain water pipes( any size or pattern), including all fittings heads shoes bends swan-necks etc complete all as specified.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches, complete all as specified.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches, complete all as specified.

S&F 75mm dia PVC (SWR) bends any radius, complete all as specified.

S&F 110 mm dia PVC (SWR) bends any radius, complete all as specified.

S&F 75mm dia Junction single (Single or double T) equal or unequal, complete all as specified.

S&F 110mm dia Junction single (Single or double T) equal or unequal, complete all as specified.

M&L PVC (SWR) floor trap 75 mm, plain with PVC grating including jointing with solvent cement etc., complete all as specified.

S&F in repair Mild steel curtain rod powder coated with fixing side brackets,end cups,rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as complete all as specified.

M&L Non-skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular), primium quality area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and incl screed bedding 15mm thick in cm(1:6), complete all as specified.

M&L Non-skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and incl screed bedding 10mm thick in cm(1:4), complete all as specified.

M&L Preparation of newly plastered surfaces of walls & applying two coats coats of oil bound distemper over a coat of chalk whitning primer complete all as specified.

M&L Complete removal of existing treatment including preparation of old decorated plastered or unplastered by brooming down with steel wire brush, scraping down smoke soot, mould, moss and efflorescent salts and trading oil, greasy spots and applying two coats of oil bound distemper, complete all as specified and as directed.

S&F Mild steel pressed handle, oval type, 150 mm long, stove enameled black and fixed with steel screws complete all as specified.

S&F Mild steel barrel tower bolts, stove enameled black, with bright bolt, medium weight 200 mm long and fixed with steel screws complete all as specified.

S&F in repair 300 mm mild steel helical door spring including roller and roller plate complete all as specified.

S&F in repair 15mm stop valve cast copper alloy with crutch or butterfly handle ,screwed down screwed for iron pipe or for brass ferrule, complete all as specified.

S&F in repair 15 mm bore bib tap of, cast copper alloy chromium plated, screwed down, high pressure with crutch or butter fly handle, complete all as specified.

S&F PVC connection 15mm size with brass nuts on both ends, 450mm long with PTMT nuts complete all as specified.

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), all as specified

S&F Towel rail, PTMT, 450mm long and fixed to walls with brass screws and wooden/plastic cleats complete all as specified.

Dismantling CI pipe alongwith fittings of 75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified.

S&F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified.

S&F 110 mm bore PVC (SWR) vent cowl, complete all as specified.

S&F, 100mm bore PVC rain water pipes, fixed to walls incl MS clamps with nuts & bolts as in repair, complete all as specified.

M&L for screed bedding 10 mm thick in cement mortar (1:4) concrete surfaces of roof, mixed with WPC (WPC shall be measured and paid seaparately), finished even and smooth without using extra cement etc, complete all as specified.

Supply only integral water proofing compound complete all as specified.

M&L for Brick work in cement mortar 1:4 using sub class ‘B’ old size bricks in half brick thick walls, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

M&L for laying APP based polymeric membrane 3 mm thick with minimum weight not less than 3 kg/sqm, reinforced with non woven polyster fabric (wt. not less than 160 gms/sqm) torching Joints/overlaps with a propane or a butane gas torch, laid with a minimum overlap of 150mm with thermo fusable finish laid /bonded over a coat of hot blown bitumen 85/25 @ 1.20kg/sqm, over forced application bitumen primer @ 0.30 liters per sqm, including preparation of plastered surfaces of sunken floor, complete all as specified and as directed by Engineer-in-Charge. NOTE :- The water proofing treatment shall be got carried out by manufacturer or their authorised applicator.

M&L for rendering 10 mm thick in cement mortar (1:3) on concrete surfaces of sunken floor, mixed with WPC (WPC shall be measured and paid seaparately), etc complete all as specified.

S&F GI tube medium grade, 40 mm nominal bore for, fixed to walls, as in spouts of sunken portion, complete with and including clamps, socket & elbow etc, complete all as specified.

M&L for cement conceret (1:5:10) type E-2 using 40mm graded aggregate in foundations, fillings and mass concrete, complete all as specified.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including (reinforcement cut as required to facilitate demolition, complete all as specified.

M&L Formwork to chullah hoods, chajjas, troughs and similar items including edges, complete all as specified.

M&L reinforced cement concrete (1:2:4) type B-1 (20 mm graded stone aggregate) as in chajja, supported on wall, beams, roof, landing, bolconies and shelves and like, complete all as specified.

S&F Mild steel TMT bars 10 mm dia and over as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia FE-500/550 confirming to IS-1786-1985 all as specified.

S&F Mild steel TMT bars 6 to 8mm dia cut to length, bent to shape required including cranking, bending spirally for columns, hooking ends, as in stirrups, spacers, binders and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete, FE-500/550 confirming to IS-1786-1985 all as specified & directed.

M&L for Providing precast cement concrete (!:2:4) type B-0 using 12.5 mm graded aggregate as in louvres and jallies, 40mm thick (measured solid), including all mouldings but excluding frame set in cement mortar (1:4) complete all as specified.

Taking down carefully existing copper/alumimium point wiring for light/fan/socket out let points complete with fitting and fixtures, ceiling fan, battens, wire etc and making good the disturbed surfaces of walls and ceilings, complete all as specified.

Taking down unserviceable main switches and distribution boards single phase complete all as specified.

Taking down carefully old unserviceable sub main wiring and making good disturbed sufaces and matching with existing complete all as directed and specified.

M&L Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia )duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly complete all as specified for One light/fan/bell/exhaust point controlled by one single pole one way switch.

All as per srl item No 131 here-in-before but One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board .

All as per srl item No 131 here-in-before but One 3 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per srl item No 131 here-in-before but one switch socket outlet multi purpose, 3 pin, 15 Amps, point to be controlled by one switch and wiring with 2.5 Sqmm PVC FRLS cable, insulated, stranded, unsheathed copper conductor on Independent board with continuous earth wire of size 2.5 sqmm, PVC copper conductor, insulated, unsheathed, stranded, complete all as specified.

All as per srl item No 131 here-in-before but, but one switch socket outlet multi purpose, 3 pin, 15 Amps, point to be controlled by one switch and wiring with 4 Sqmm PVC FRLS cable, insulated, stranded, unsheathed copper conductor on Independent board with continuous earth wire of size 4 sqmm, PVC copper conductor, insulated, unsheathed, stranded, complete all as specified.

S&F Switch, piano, flush type, single pole one way, 6 Amps, ISI marked, complete all as specified.

S&F Switch piano flush button type 20 Amps, single pole, one way,ISI marked, complete all as specified.

S&F Socket outlet,2 in 1, 5 pin ,6 Amp, piano flush type,ISI marked, complete all as specified.

S&F Socket outlet 2 in 1, 6 pin, 20 Amp, piano flush type,ISI marked, complete all as specified.

S&F Ceiling rose, surface type, 240 volts, 50 HZ, 6Amp, backelite 65mmx50mm, 3 terminals complete all as specified.

S&F batten holder, (with metal ring) 240 volts, 50 HZ, 6 Amp, including LED bulb of 9 watts, B22, complete all as specified.

S&F rotary stepped type electronic fan regulator for ceiling fan 1200/1400mm size,240 volts,6 Amps, 100 W deluxe, complete all as specified.

S&F LED light fitting 1x20 Watt, 220 volts, AC decorative box type with driver holder including LED tube light connecting up with flexible copper conductor cable of suitable size from ceiling rose, complete all as specified.

S&F 4 feet LED square tube light fitting 20 Watt, energy efficient fixed to wall/ceiling, complete all as specified.

S&F LED street light fittings 35 watts, 230 volts AC outdoor type complete with all accessories like lamp, bracket of 1.2 metre long 40 mm GI light grade tubing & bent at middle to shape by 120 degree from vertical du;ly painted with two coats of aluminium paint with mild steel clamps, nuts & bolts,sleek pressure die cast aluminium housing heat resistant glass IP-65 protection, cable insulated and PVC sheathed copper conductor multi stranded and connecting to conductor and testing, complete all as specified.

S&F as in repair Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, VTPN DB with 200 Amps rated bus bar, 4 way, FP-42 protection surface mounting, 415 volts, dust and vermin proof, suitable for incorporation of MCCBs duly concealled in wall, factory made, including MCCB adjustable thermal & fixed magnetic type, 4 pole, 100 Amps, 50 Hz, 415 volts with rupturing capacity 16 KA and making good disturbed surfaces with matching colour, complete all as specified.

S&F as in repair Factory made single phase and neutral sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet, powder coated, vertical distribution board, 200 Amps, 8 way, 240 volts 50 HZ, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar, neutral link, earth bar and din rail, suitable for use on partly immersed in wall, including making good disturbed surfaces with matching colour, complete all as specified.

S&F in repairs MCB, SPN, 40 to 63 Amps, 240 volts 10 KA 'C' series, complete all as specified.

S&F in repairs MCB, single pole, 240 Volt, 6-32 Amps,10 KA 'B' series, complete all as specified.

S&F for sub main wiring with two single core PVC insulated unsheathed stranded copper conductor cable FRLS 2x6 Sqmm single core 650/1100 V, drawn through & including rigid PVC non metallic concealed conduit 25 mm dia including continuous earth wire of size 1x6 sqmm, PVC insulated and unsheathed cable copper stranded conductor (green colour) complete all as specified. NOTE:-Two runs of cable,1 run of earth wire & one run of PVC conduit shall be measured as one length.

S&F heavy duty, 900 RPM Exhaust fan AC single phase 230/240 Volts of 300mm sweep with louver plastic body, including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection & louvers complete all as specified.

Cutting hole of suitable size, making good, the disturbed surface, grouting nuts & bolts for fixing of exhaust fans, complete all as specified.

Hanging only ceiling fan, height upto 3m to 5m ceiling height and connecting up including provision of 3 core FR PVC insulated and overall round sheathed flexible cable of size 23/00.0076 from ceiling rose or connector to fan, complete all as specified. Note:- ceiling fan shall be obtained from item No 128.

M& L Earthing as in repairs complete, all as shown on electrical plate No 3 of MES schedule part-I, and as specified including the following :-(i) Galvanised steel earth plate of size 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth not less than 1.50 metre below normal ground level.(ii) Earth plate surrounded by and packed with char-coal and common salt in alternative layers (n.exc 15cms each layer).(iii) 4 mm dia (8 SWG) G.I earth wire from earth plate to main switch board including necessary GI bolts, nuts check nuts, washers, thimbles etc.(iv) 15 mm bore light grade, GI pipe for protection to earth-strip.(v) 20mm bore, medium grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontally to the earth pit. (vi) 50mm thick pre-cast cover of cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate and MS angle iron 25x25x3mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces.(vii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance upto 50 metre including testing on completion, complete all as specified.

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire, complete all as specified.

S&F XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 35 Sqmm nominal cross section, 4 core, flat or circular, PVC FRLS insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified .

S&F XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 25 Sqmm nominal cross section, 4 core, flat or circular, PVC FRLS insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC FRLS sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified .

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep, not exc. 10 Sqm on plan and getting out complete all as specified.

M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified. (Excavation and earth work measured separately).Note- Punned down thickness shall be measured.

S&F cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified. (Excavation and earth work measured separately).

Returning, filling in, earth including spreading, leveling watering and well ramming in layer each not exceeding 25cm thick complete all as specified.

Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified.

S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/walls, laid under floor/road crossings, complete with and including clamps, socket & elbow etc,and taking out existing pipe, complete all as specified.

Marwaha Builders

M/s S B Construction Company

Dee Kay EnterPrises

Supreme Constructions