Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.5 LAccepted-AOC 13 P N DOGRA MARKET GOLE MARKET UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L1 | Accepted-AOC L1 | |
| 2 | L2₹40.9 L+₹2.9 L (7.62%)Rejected-Finance 135 CHAKRANA TIWARI CHAKA NAINI PRAYAGRAJ 211008 UTTAR PRADESH | PRAYAGRAJ | UTTAR PRADESH | 211008 | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹42.0 L+₹4.0 L (10.6%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹44.2 L+₹6.3 L (16.5%)Rejected-Finance HOUSE NO 108 WARD NO 08 SHAKTI NAGAR DHAR ROAD UDHAMPUR UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L4 | Rejected-Finance OTHER THAN L1 | |
| 5 | L5₹44.6 L+₹6.6 L (17.3%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN L1 |
| Sl No | Description | Qty | Unit | MOHAN LAL AND SONS L6 | slathia construction works L4 | vijay builders L2 | VARDHMAN INTERNATIONAL L1 | PROACH ASSOCIATES BUILDERS & ENGINEERS L7 | PREM NATH KHAJURIA AND SONS L5 | SIDDAHANT ENTERPRISES L3 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | S&F straight through joint kit, heat shrinkable type suitable for 35 to 95 sqmm LT UG Cable, complete all as specified and directed by Engr-in-Charge. | 6 | Each | 1,500 ₹9,000 Lowest | 2,000 ₹12,000 | 4,800 ₹28,800 | 4,300 ₹25,800 | 2,500 ₹15,000 | 2,400 ₹14,400 | 4,200 ₹25,200 |
| 2.00 | S&F straight through joint kit, heat shrinkable type suitable for 120 to 185 sqmm LT UG Cable, complete all as specified and directed by Engr-in-Charge. | 4 | Each | 1,500 ₹6,000 Lowest | 2,500 ₹10,000 | 4,800 ₹19,200 | 5,500 ₹22,000 | 2,300 ₹9,200 | 2,600 ₹10,400 | 5,000 ₹20,000 |
| 3.00 | S&F straight through joint kit, heat shrinkable type suitable for 240 to 400 sqmm LT UG Cable, complete all as specified and directed by Engr-in-Charge. | 4 | Each | 1,500 ₹6,000 Lowest | 2,500 ₹10,000 | 4,800 ₹19,200 | 7,500 ₹30,000 | 2,600 ₹10,400 | 2,800 ₹11,200 | 4,200 ₹16,800 |
| 4.00 | Taking out UNSV joint kit of any sizes, complete all specified & directed by Engr-in-Charge. | 14 | Each | 10 ₹140 Lowest | 10 ₹140 Lowest | 10 ₹140 Lowest | 500 ₹7,000 | 200 ₹2,800 | 50 ₹700 | 100 ₹1,400 |
| 5.00 | Taking out old unservicable panel, supply, install, testing and commissioning and testing factory made and tested CPRI type test certified LT feeder pillar box (KIOSK) out door type, floor mounted,compertmantalised suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, dust and vermin proof, made of 3.15mm CRCA MS sheet with digital Volt meter, Ammeter, with CTs ,Led lamps RYB for all incomers & outgoings MCCBs are to busbar spadles to fitted complete base frame of 50x50x6mm angle iron,powder coated, having front and rear openeable hinged double door shutters with aprons for cable entry and locking arrangement complete with following, complete all as specified and directed by Engr-in-Charge :-
Note:- Number pad lock of four combination 02 nos for each panel will be provided in the quoted rates above. | 1 | Each | 1,85,000 ₹1,85,000 | 2,00,000 ₹2,00,000 | 1,32,000 ₹1,32,000 | 1,45,000 ₹1,45,000 | 1,99,000 ₹1,99,000 | 1,65,800 ₹1,65,800 | 1,07,000 ₹1,07,000 Lowest |
| 5.01Incoming (a) MCCB 630 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 35 KA- 1 No. (b) Bus bar electrolytic grade Aluminium and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 1000 Amp,4 pole, not less than 1.5 MTR long mounted on insulators 01 set. Outgoing (a) MCCB 250 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 35 KA-01 Nos. (b) MCCB 400 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 35 KA- 1 No. Note- (i) Rate quoted is deemed to be inclusive of PCC foundation/pedestal and connected earth work. (ii) Panels shall be placed above 0.6 mtr from ground level. (iii) Outgoing MCCBs shall be fed with solid busbar connectors. (iv) Cables shall be terminated using gun metal /SS glands. (v) including suitable thimbles/lugs, nut bolts ,washers fitted the cables. (vi) cable glands for incoming and out going suitable cables is including rate quoted by vendover. (vii) 02 No's of Earhing connecting the same panel will be measured and paid separately. | ||||||||||
| 6.00 | Description all as per Ser items No 5.00 above here-in-before but following capacity for, complete all specified & directed by Engr-in-Charge :-
Incoming
(a) MCCB 630 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 35 KA- 1 No.
(b) Bus bar electrolytic grade Aluminium and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 1000 Amp,4 pole, not less than 1.5 MTR long mounted on insulators 01 set.
Outgoing
(a) MCCB 400 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 35 KA- 1 No.
(b) MCCB 160 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 25 KA-02 No.
Note- (i) Rate quoted is deemed to be inclusive of PCC foundation/pedestal and connected earth work.
(ii) Panels shall be placed above 0.6 mtr from ground level.
(iii) Outgoing MCCBs shall be fed with solid busbar connectors.
(iv) Cables shall be terminated using gun metal /SS glands.
(v) including suitable thimbles/lugs, nut bolts ,washers fitted the cables.
(vi) cable glands for incoming and out going suitable cables is including rate quoted by vendover.
(vii) 02 No's of Earhing connecting the same panel will be measured and paid separately. | 1 | Each | 2,10,000 ₹2,10,000 | 2,20,000 ₹2,20,000 | 1,22,000 ₹1,22,000 | 1,60,000 ₹1,60,000 | 1,90,000 ₹1,90,000 | 1,52,500 ₹1,52,500 | 1,12,000 ₹1,12,000 Lowest |
| 7.00 | Description all as per Ser items No 5.00 above here-in-before but following capacity for, complete all specified & directed by Engr-in-Charge :-
Incoming
(a) MCCB 400 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 35 KA- 1 No.
(b) Bus bar electrolytic grade Aluminium and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 1000 Amp,4 pole, not less than 1.5 MTR long mounted on insulators 01 set.
Outgoing
(a) MCCB 250 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 35 KA-02 Nos.
Note- (i) Rate quoted is deemed to be inclusive of PCC foundation/pedestal and connected earth work.
(ii) Panels shall be placed above 0.6 mtr from ground level.
(iii) Outgoing MCCBs shall be fed with solid busbar connectors.
(iv) Cables shall be terminated using gun metal /SS glands.
(v) including suitable thimbles/lugs, nut bolts ,washers fitted the cables
(vi) cable glands for incoming and out going suitable cables is including rate quoted by vendover.
(vii) 02 No's of Earhing connecting the same panel will be measured and paid separately. | 2 | Each | 1,75,000 ₹3,50,000 | 1,40,000 ₹2,80,000 | 1,32,000 ₹2,64,000 | 1,30,000 ₹2,60,000 | 1,88,000 ₹3,76,000 | 1,47,500 ₹2,95,000 | 1,06,000 ₹2,12,000 Lowest |
| 8.00 | Description all as per Ser items No 5.00 above here-in-before but following capacity for, complete all specified & directed by Engr-in-Charge :-
Incoming
(a) MCCB 400 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 35 KA-01 No.
(b) Bus bar electrolytic grade Aluminium and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 800 Amp,4 pole, not less than 1.5 MTR long mounted on insulators 01 set.
Outgoing
(a) MCCB 200 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 25 KA-02 No.
(b) MCCB 100 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 25 KA-03 Nos.
Note - (i) Rate quoted is deemed to be inclusive of PCC foundation/pedestal and connected earth work.
(ii) Panels shall be placed above 0.6 mtr from ground level.
(iii) Outgoing MCCBs shall be fed with solid busbar connectors.
(iv) Cables shall be terminated using gun metal /SS glands.
(v) including suitable thimbles/lugs, nut bolts ,washers fitted the cables.
(vi) cable glands for incoming and out going suitable cables is including rate quoted by vendover.
(vii) 02 No's of Earhing connecting the same panel will be measured and paid separately. | 3 | Each | 1,80,000 ₹5,40,000 | 75,000 ₹2,25,000 Lowest | 1,12,000 ₹3,36,000 | 1,25,000 ₹3,75,000 | 1,28,000 ₹3,84,000 | 1,43,800 ₹4,31,400 | 1,07,000 ₹3,21,000 |
| 9.00 | Description all as per Ser items No 5.00 above here-in-before but following capacity for, complete all specified & directed by Engr-in-Charge :-
Incoming
(a) MCCB 320 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 35 KA-01 No.
(b) Bus bar electrolytic grade Aluminium and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 800 Amp,4 pole, not less than 1.5 MTR long mounted on insulators 01 set.
Outgoing
(a) MCCB 200 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 35 KA-02 No.
(b) MCCB 100 A 4 pole, with thermal adjustable and fixed magnetic setting with extended 50Hz ,415 V with rupturing capacity 25 KA-03 No.
Note- (i) Rate quoted is deemed to be inclusive of PCC foundation/pedestal and connected earth work.
(ii) Panels shall be placed above 0.6 mtr from ground level.
(iii) Outgoing MCCBs shall be fed with solid busbar connectors.
(iv) Cables shall be terminated using gun metal /SS glands.
(v) including suitable thimbles/lugs, nut bolts ,washers fitted the cables.
(vi) cable glands for incoming and out going suitable cables is including rate quoted by vendover.
(vii) 02 No's of Earhing connecting the same panel will be measured and paid separately. | 3 | Each | 1,72,000 ₹5,16,000 | 1,75,000 ₹5,25,000 | 1,52,000 ₹4,56,000 | 1,10,000 ₹3,30,000 Lowest | 1,23,900 ₹3,71,700 | 1,63,900 ₹4,91,700 | 1,16,000 ₹3,48,000 |
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
15 Sept 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (UTILITIES) UDHAMPUR
GE (UTILITIES) UDHAMPUR, PO-GARHI, PIN-182121
Repair/Maint to LT network system in Command HQs, CP Colony, Command Camp and other locations under GE (U) Udhampur.
2025_MES_726476_1
GE/U-55/2025-26
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (UTILITIES) UDHAMPUR
AS PER NIT
8 documents required · 8 mandatory
₹500
GE (UTILITIES) UDHAMPUR
₹97,000
17 Oct 2025
18 Aug 2025
17 Sept 2025
18 Aug 2025
15 Sept 2025
1 Sept 2025
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .