PROVN OF RCC COVER TO EXISTING DRAINAGE AT AREA OF OTM ACCN, PROVN OF ..........FLOORING IN BLDG NO P-17, P-18, P-19 AT R LINES OF CERTAIN UNIT UNDER GE KAMPTEE.

Amount

M&L for providing precast RCC cover slabs (1:2:4) type B1 (using 20mm graded stone aggregate) set in cement mortar (1:4) for drain, man holes etc and similar articles with plain faces and each cover slab covered in 6 Nos loop holes complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for providing cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for formwork to edges of concrete flats, thread breaks in floors, opening in concrete walls, floors exc 5 cm and not exc 10 cm complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

M&L for rendering 15mm thick on brick or concrete surfaces in CM (1:6), finished fair and even complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplus soil to distance not exc 50m and making good surface in hard/dense soil complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

S&F mild steel angles, including embeding in concrete and screwing etc. including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for cement concrete (1:4:8) type D2, (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tube conforming to IS 1161-1979 grade St-240 complete all as specified and directed.

M&L for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W Gde E-250 quality B complete all as specified and directed.

S&F 11 to 15mm mild steel screws bolts (machine made) with hexagonal or square heads at one end and screws both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm not exc 10cm long complete all as specified and directed.

M&L for 16 to 20mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5 cm and not exc 30cm long complete all as specified and directed.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plate, riveting, etc not exc 10 kg each brackets, conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down door / window frame with shutter (without taking off shutter from the frame) area not exc 1.5 sqm complete all as specified and directed.

S&F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing or gauzing including one coat of primer including fixing of hold fast of size 25 x 5mm flat iron etc complete all as specified and directed.

All as per item No 21 above but without glazing bars complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5mm of flat iron etc complete all as specified and directed.

S&F framed guard bars with mild steel square bars with ends of bars shouldered and/ or riveted and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality not exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed.

All as per item No. 25 above but figured glass complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ ventilators shutters complete all as specified and directed.

M&L for preparation of newly steel surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed.

Dismantling of floor, hearth or wall tiles including cement mortar bedding, but not backing complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8mm thick area of each tiles exceeding 0.18sqm but not exceeding 0.36 sqm, in floors etc set and jounted neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layers of cement mortar (1:6) for laying of floor finishes complete all as specified and directed.

All as per item No 30 above but as in skirting with 10mm backing in cement mortar (1:4) complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete /sub base complete all as specified and directed.

M&L for chequred tiles 300 x 300 x 25mm thick, rubber finished, set jointed and pointed in neat and cement slurry in floors with grey cement and pigment complete including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for providing cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) as in copings, plinth courses including weathering, slightly rounded or chamfered angles and throating on edges complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.15,000.00]

Alert Multipurpose Services

M/s M.G. Hargunani

Vishwakarma Engineering Works

Devika Constructions

NORTH INDIA PEST CONTROL

DE PRETTY AND CO

M/s B S Jain

M/s DS Khekde

Meet Road Lines

Bidder Name

Meet Road Lines

DE PRETTY AND CO

Vishwakarma Engineering Works

MVN Enterprises

M/s B S Jain

M/s DS Khekde

Devika Constructions

Alert Multipurpose Services

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL