TS No 43/25-26 of SE GCC Cbe

Amount

Supply of hardwares as conforming to latest issue of IS specifications suitable for Panther conductor-Single tension fittings including cost of all materials etc.,

Supply of hardwares as conforming to latest issue of IS specifications suitable for Panther conductor- Fabrication, supply and erection of 20mm eye bolt

Earth work excavation for foundation in HGS and and depositing on bank with initial lead of 10 m and initial lift of 2 m in Hard stiff clay Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders including cost of all lead lift labour charges etc complete

Earth work excavating for foundation and depositing on bank with initial lead of 10m and initial lift of 2 m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blasting including cost of all lead lift labour charges etc complete

Earth work excavating and depositing on bank with medium rock and dense rock not requiring blasting

Filling the M sand for filling in the foundation and floor including cost of sand, filling charges as per standard specification(watering & consolidation with all leads and lifts etc., complete.

Plain cement concrete in CC 1:3:6, using 20 mm HBG metal, for foundation / Padding Concrete excluding form work including cost of all materials, labour charges including consolidation, curing, all leads, lifts, etc., as per standard Specification complete.

Reinforced cement concrete in CC 1:1½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Footing including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Plain cement concrete in CC 1:2 :4 using 20mm HBG metal with out form work, including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Providing steel reinforcement with MS/RTS rods of reputed approved make for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, Minor T & Ps labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift etc., complete as per Standard Specification

Providing form work for plinth for above ground level including cost of all materials, labour charges leads, lifts, as per standard specification etc., complete.

Brick work in C.M. 1:5 using chamber burnt class II bricks, for Basement & superstructure including, cost of cement, all materials, labour, curing, all leads and lifts, etc complete as per Standard Specification.

Supplying and fabrication of template and Labour charge for fixing template in correct level and alignment etc complete

Supplying and fabrication of 20 mm dia Galvanizing Iron grouting bolt and nut grouting bolt including cost thread all materials lead lift etc complete

Supplying and fabrication of Galvanizing Iron 25 mm dia grouting bolt including cost thread all materials lead lift etc complete

Supplying , Fabrication,Hot dip galvanizing and fixing of angles for fencing corner posts of size 75x75x6mm & height 2.44m with 2x150 mm cleats of 30x30x5 mm angle and back support of 50x6 mm MS flats, including cost of all materials,fixing charges, painting two coats over one coat of primer, lead, lift, as per standard specification, etc., complete.

Supplying , Fabrication,Hot dip galvanizing of angles for fencing intermediat and sturt support posts of size 65x65x6mm & height 2.44m with 2x150 mm cleats of 30x30x5 mm angle, and back support of 50x6 mm M.S flats including cost of all materials,fixing charges, painting two coats over one coat of primer, lead, lift, as per standard specification, etc., complete.

Supplying and tensioning of GI chain link fencing with 2"x2" using 10 gauge GI wire and tying with the corner and intermediate posts with using GI bolt & nuts including cost of all materials, lead, lift, labour as per standard specification , etc., complete.

Plastering with CM 1:3, 12 mm thick for Ceiling & Sunshade bottom including cost of cement, all materials, labour, curing, leads and lifts etc., complete.

colour washing with two coats using cement paint over one coat of white cemnet including through scrapping, clan removal of dirt, cost of all materials, labour, Lead, Lift etc., complete and including necessary crack filling paste, putty whereever required.

Disposal of Excess of surplus earth away in low lying area with a lead of 100 Mts including spreading and levelling labour, lead, lift as per standard specification, etc., complete.

Dismantling of plain Cement Concrete for existing plinth including all labour, lead, lift etc., complete.

Releasing , Lowering and restringing of 6 Nos of Panther and 1 No. Earth wire,conductor.rough sagging, tensioning for clipping ,providing trussels at required intervels for paving out the conductor , providing vibration dampers at tension location giving jumber connection including major, minor Tools and plants, all labour,lead,lift,etc., as per standard specification complete.

Lower and dismantling of 7-8 units of insulators including major, minor Tools and plants, all labour,lead,lift,etc., as per standard specification complete.

Transporting and Hoisting of 8 units of 120 KN insulators with fittings transporting from stores to site including cost of all T&P's with all labour, lead, lift etc., complete as per standard specification.(Under LC Condition)

Transporting and Hoisting of 7 units of 90 KN insulators with fittings transporting from stores to site including cost of all T&P's with all labour, lead, lift etc., complete as per standard specification.(Under LC Condition)

Supplying and spreading 100 mm tk of 20 mm metal over crusher dust of 100 mm thick, including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete.as per standard specification

Supplying and fixing, laying and testing of 25 mm dia PVC pipe 10 kg/cm2 pressure of approved good Quality ISI make including cost of pipe, GI specials, all materials, lead, lift, etc., complete, as per standard specification.

Supplying and fixing, laying and testing of 40 mm dia PVC pipe 10 kg/cm2 pressure of approved good Quality ISI make including cost of pipe, GI specials, all materials, lead, lift, as per standard specification ,etc., complete.

Supplying and fixing 25 mm dia GM gate valve ISI make of approved quality including cost of all materials, labour, lead, lift, etc., complete., as per standard specification.

Supplying and fixing 40 mm dia GM gate valve ISI make of approved quality including cost of all materials, labour, lead, lift, etc., complete., as per standard specification.

Providing fixing 12mm screw down bib cock including cost of all materials labour lead lift etc complete

Supplying and fixing of 65mm dia GI pipe 'B' class including cost of all materials labour lead lift etc complete

Providing fixing of 25 mm dia GI union including cost of all materials labour lead lift etc complete

Providing fixing of 40 mm dia GI union including cost of all materials labour lead lift etc complete

Supplying and filling in gravel for entire yard area including material cost , filling charges as per standard specification (watering & consolidation) with all leads and lifts as per standard specification, etc., complete.

Supplying and fixing of RCC Collar 600mm dia and 300mm depth including cost of all materials labour, lead, lift, etc.,complete.

Providing casing pipe line for laying cable to breaker plinths with 160 mm dia PVC pipe 06 kg/cm2 of approved make, including all specials and cost of all material, lead, lift, etc., complete as per standard specification.

Providing Expansion joints with Bitumen Pad with100 mm depth and 12 mm thick including labour,materials ,lead ,lift, etc,complete.

Supply and fixing of 90lbs rails in transformer plinth including cost of material and fixing charges etc complete

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

Vidhyut Nirman Corporation (BID ID -1512526)

M/s A.Chelladurai & Co (BID ID -1512503)

S RATHIKA CONSTRUCTIONS (BID ID -1511148)

MK DHANALAKSHMI ENGINEERING PRIVATE LIMITED (BID ID -1512416)

R K and Co (BID ID -1512570)