Construction of various buildings i.e. Boys and Girl dormitory etc. at JNV Bhandara.

Sr.No Description of Item Amount DSR-2023 (In ₹) Amount NS (In ₹)

1 Cost of Building Works

Warden Residency Boys (G+1) 27,83,712 79,675 28,63,387

Warden Residency Girls (G+1) 26,47,573 70,289 27,17,862

2 Cost of Development Works

Strom Water Drain 19,29,339 - 19,29,339

Drain Channel 20,93,775 - 20,93,775

Landscaping and Horticulture 2,06,975 - 2,06,975

Rain Water harvesting 6,84,108 - 6,84,108

External Water Supply 10,02,498 4,97,035 14,99,532

External Electrification 8,28,676 10,78,125 19,06,801

G.Total(A+B) 9,49,05,000

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Bill of Quantities

Type-II-05 Residential Quarter (G +2)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

4 2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia meter 10.00 352.15 3,522 -

2.10.1.3 Pipes, cables etc. exceeding 300 mm dia but not 2,749

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations 3,920

etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by

6 2.25 ramming and watering, lead up to 50 m and lift up to 1.5 m. cum 20.00 196.00

2.27 Supplying and filling in plinth with Jamuna sand / river under floors including watering, 10,619

7 ramming consolidating and dressing complete. Cum 5.00 2123.75

8 2.34 Supplying chemical emulsion in sealed containers including delivery as specified. -

9 2.34.1 Chlorpyriphos/Lindane Emulsifiable concentrate of 20%. Litre. 5.00 234.75 1,174 -

Along the external wall below concrete or masonry apron using chemical emulsion @ -

10 2.25 litres per linear metre including drilling and plugging holes etc.: -

11 2.35.2.1 With Chlorpyriphos /Lindane E C. 20% with 1% concentration. metre 40.00 53.45 2,138 -

treatment under floor using chemical emulsion (excluding the cost of chemical -

Treatment of soil once the excavation is over the entire carpet area shall be chemically -

13 treated by making 12 mm dia holes at 150 c/c and 50-75 mm deep and applying Sqm 90.00 170.00

insecticide emulsion under pressure @5l/sqm of the horizontal surface area (as per IS 15,300

14 CONCRETE WORK -

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of -

15 cantering and shuttering - All work up to plinth level

4.1.10 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) 77,148

4.10 Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 6,615

17 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size). Sqm 16.10 410.85

4.12 Extra for providing and mixing water proofing material in cement concrete work in doses 726

by weight of cement as per manufacturer’s specification -

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand 25,289

: 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick

ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand

including finishing the top smooth -

20 Formwork - -

5.9 Centring and shuttering including strutting, propping etc. and removal of form for: -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

22 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. sqm 130.20 392.15 51,058 -

23 5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 434.00 927.25 4,02,427 -

24 5.9.5 Lintels, beams, plinth beams, girders, bressummers and cantilevers. Sqm 39.75 736.40 29,272 -

25 5.9.6 Columns, Pillars, Piers, Abutments, posts and Struts Sqm 312.00 961.30 2,99,926 -

5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in -

position and binding all complete up to plinth level -

27 5.22.6 Thermo-Mechanically Treated bars kg 2520.00 107.85 2,71,782 -

5.22 A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in -

position and binding all complete above plinth level. -

29 5.22A.6 Thermo-Mechanically Treated bars kg 9134.59 107.85 9,85,165 -

5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. 19,600

projections. -

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement -

concrete work, using cement content as per approved design mix, manufactured in fully

automatic batching plant and transported to site of work in transit mixer for all leads,

having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site

31 5.33 of laying , excluding the cost of cantering, shuttering finishing and reinforcement,

including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength and durability

as per direction of the Engineer - in - charge.

(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement

used as per design mix is payable/recoverable separately). -

32 5.33.1 All works up to plinth level. cum 25.20 9333.95 2,35,216 -

33 5.33.2 All works above plinth level up to floor V level. cum 45.67 9689.60 4,42,552 -

34 BRICK WORK - -

6.1 Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5 -

in foundation & plinth in: -

36 6.1.2 Cement mortar 1:6 (1 cement: 6 coarse sand) cum 6.90 7132.25 49,213 -

6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 -

37 in superstructure above plinth level up to floor V level in all shapes and sizes in :

38 6.4.2 Cement mortar 1: 6(1 cement: 6 coarse sand) cum 130.61 9105.95 11,89,303 -

6.5 Extra for brick work I AAC block masonry / Tile brick masonry in Extra for brick work I 24,762

AAC block masonry / Tile brick masonry in

superstructure above floor V level, for each four floors or part thereof by

mechanical means. -

6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class -

designation 7.5 in superstructure above plinth level up to floor V level. -

6.13.2 Cement mortar 1:4 (1 cement: 4 coarse sand) 135.00 1,51,713

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third 14,148

course of half brick masonry. -

Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. 3,096

43 6.44 (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 metre 52.00 59.54

(1 cement : 4 fine sand).

Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry Providing and

laying Autoclaved Aerated concrete(AAC) blocks masonry

6.38 100 mm/ 125 mm thick with Grade-1 AAC blocks of density 551 to 650 cum 5 10195.45 50,977

kg/cum conforming to IS:2185 (Part 3) in super structure above plinth

44 MARBLE WORK - -

8.3 Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including -

45 machine polishing to edge to give high gloss finish etc. complete as per design approved

by Engineer-in-Charge. -

8.4 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia 8,528

48 and drops of width up to 150 mm with epoxy resin based adhesive, including cleaning metre 15.00 568.55

etc. complete. -

8.5 Extra for providing opening of required size & shape for wash basins / kitchen sink in 4,894

kitchen platform, vanity counters and similar location in marble / Granite / stone work

including necessary holes for pillar taps etc. Including rubbing and polishing necessary

etc. complete. -

50 WOOD WORK -

9.21 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) -

non-decorative type, core of block board construction with frame of 1st class hard wood

and well matched commercial 3 ply veneering with vertical grains or cross bands and

face veneers on both faces of shutters : -

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 1,06,234

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on 20,528

53 9.23 all edges of flush door shutters (over all area of door shutter to be measured). sqm 44.40 462.35

9.26 Extra for cutting rebate in flush door shutters (Total area of the shutter to be 4,737

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in -

gloss / matt / suede finish with high density protective surface layer and reverse side of

adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of

approved quality. -

9.62 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws -

etc. complete : -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

9.76 Providing & fixing bright finished brass 100mm mortice latch and lock with 6 levers and 17,093

59 a pair of lever handles with necessary screws etc. complete (Best make of approved Each 20.00 854.65

9.83 Providing & fixing IS:3564 marked aluminium Die cast body tubular type universal 22,497

60 hydraulic door closer with necessary accessories and screws etc. complete Each 20.00 1124.85

9.91 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with 1,511

nuts complete. -

9.92 Providing and fixing chromium plated brass handles with necessary screws etc. -

9.79 Providing & fixing special quality bright finished brass Cupboard or ward robe locks with -

64 four levers including necessary screws etc. complete (best make of approved quality).

Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed 1,61,515

three layer particle board or graded wood particle board IS: 12823 marked, exterior

grade (Grade l Type all), having one side decorative lamination and other side balancing

lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with

necessary screws and bright finished stainless steel piano hinges, complete as per

direction of the Engineer-in-Charge -

9.114 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe -

shutters, including fixing with necessary screws etc. complete. -

68 9.114.1 Triple strip vertical type Each - -

69 9.114.2 Double strip (horizontal type) Each 20.00 39.70 794 -

9.47 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : -

71 9.47.1 20 mm Dia (heavy type) metre 1.00 175.00 175 -

9.96 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating -

72 not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or

shade with nuts and screws etc. complete: -

9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less -

75 than grade AC 10 as per IS : 1868 ) transparent or dyed toreqired colour or shade with

necessary screws etc. -

9.100 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less -

78 than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with

necessary screws etc. complete : -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

9.101 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic -

coating not less than grade AC 10 as per IS :1868) transparent or dyed to required

colour or shade with necessary screws etc. complete:

81 9.101.2 Twin rubber stopper Each 22.00 72.25 1,590 -

9.135 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and -

82 clerestory windows using wire gauge with average width of aperture 1.4 mm in both

directions with wire of dia. 0.50 mm all complete.

83 9.135.2 With 12 mm mild steel U beading sqm 43.73 1228.00 53,694 -

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall 24,881

thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners

and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the

84 9.119 vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 metre 50.50 492.70

gauge, EPDM rubber gasket weather seal to be provided through out the frame. The

door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as

per manufacturer’s specification and direction of Engineer-in-Charge. -

Providing and fixing factory made panel PVC door shutter consisting of frame made -

out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and

15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of

approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded

PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat

and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm

thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be

tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide

PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to

form lock rail. -

Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) -

thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail,

paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/

sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet

86 beading on inner side, and joined together with solvent cement adhesive. An additional

5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’

Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-

charge, manufacturer’s specification & drawing.

87 9.120.2 30 mm thick pre laminated PVC door shutters sqm 15.75 3,663.80 57,705

88 STEEL WORK - -

10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed 114

89 work, including cutting, hoisting, fixing in position and applying a priming coat of Kg. 1.00 113.70

approved steel primer all complete: -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

10.14 Providing and fixing pressed steel door frames conforming to IS: 4351, -

manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges,

jamb, lock jamb, bead and if required angle threshold of mild steel angle of section

50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together

by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar

guards, lock strike plate and shock absorbers as specified and applying a coat of

approved steel primer after pre-treatment of the surface as directed by Engineer-in-

92 10.14.3.1 Fixing with adjustable lugs with split end tail to each jamb metre 116.50 640.20 74,583 -

10.15 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard -

with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred,

93 welded and grinded finish, with profiles of required size, including fixing of necessary

butt hinges and screws and applying a priming coat of approved steel primer.

10.15.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm 2,52,979

94 of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal Kg 1296.00 195.20

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan 4,413

clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its

top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S.

95 10.18 sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp Each 20.00 220.65

shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, 86,509

plates etc., including welding, grinding, buffing, polishing and making curvature

(wherever required) and fitting the same with necessary stainless steel nuts and bolts

96 10.28 complete, i/c fixing the railing with necessary accessories & stainless steel dash Kg 112.00 772.40

fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side

of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for

payment purpose only weight of stainless steel members shall be considered excluding -

fixing accessories such as nuts, bolts, fasteners

97 ROOFING - -

Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm Painting top -

of roofs with bitumen of approved quality @ 17kg per 10 sqm

impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including

cleaning the slab surface with brushes and finally with a piece of cloth

lightly soaked in kerosene oil complete :

99 12.15.1 With residual type petroleum bitumen of grade VG -10 sqm 160.00 166.2 26,592 -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Providing corrugated G.S. sheet roofing including vertical/ curved surface Providing

corrugated G.S. sheet roofing including vertical/ curved surface

fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter

with bitumen and G.I. limpet washers or with G.I. limpet washers filled

100 with white lead, including a coat of approved steel primer and two coats sqm 160.00 1457.15

of approved paint on overlapping of sheets complete (up to any pitch

in horizontal/ vertical or curved surfaces), excluding the cost of purlins,

rafters and trusses and including cutting to size and shape wherever -

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

101 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1

cement : 3 fine sand) as per standard design : -

102 In 75x75mm deep chase

103 FLOORING -

Marble stone flooring with 18mm thick marble stone as per sample of marble approved -

by Engineer-in-charge over 20 mm (average) thick base of cement mortar 1:4 (1

cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and

polishing complete with : -

106 11.24 Extra for pre finished nosing to treads of steps of marble/granite stone. metre 1.00 719.9 720

Extra for marble/granite stone flooring in treads of steps and risers using single length 852

up to 2.00 metre. -

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey -

108 11.26 cement slurry mixed with pigment to match the shade of the slab, including rubbing and

polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : -

Kota stone slabs 20 mm thick in risers of steps, skirting,dado and pillars laid on 12 mm 22,723

(average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey

cement slurry mixed with pigment to match the shade of the slabs, including rubbing

and polishing complete. -

Providing & laying rectified glazed ceramics floor tiles 300x300mm or more

(thickness to be specified by the manufacturer) of Ist quality conforming to IS:15622 of

111 11.39 approved make in colours White, Ivory, Grey, Fume, Red Brown, laid on 20 mm thick sqm 114.66 1330.00

cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white

cement and matching pigments etc. complete.

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Providing and laying Vitrified tiles in floor in different sizes (thickness to be -

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS: 15622, of approved brand & manufacturer, in all colours

and shade, laid on 20 mm thick cement mortar 1 :4 (1 cement: 4 coarse

112 11.41 sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the

joints with white cement and matching pigments etc. The tiles must be cut

with the zero chipping diamond cutter only . Laying of tiles will be done

with the notch trowel, plier, wedge, clips of required thickness, leveling

system and rubber mallet for placing the tiles gently and easily.

113 11.41A.1 Double charge vitrified tile polished finish of size - -

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 2,99,553

(thickness to be specified by the manufacturer ) of approved make in all colours, shades

except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in

skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1

cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including

pointing in white cement mixed with pigment of matching shade complete -

116 FINISHING - -

117 13.4 12 mm cement plaster of mix : - -

119 13.16 6 mm cement plaster to ceiling of mix : - -

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 1,27,045

121 13.11 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 Sqm 245.00 518.55

cement : 6 fine sand).

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to 1,97,025

prepare the surface even and smooth complete. -

Distempering with oil bound washable distemper of approved brand and manufacture to -

123 13.41 give an even shade : -

New work (two or more coats) over and including water tinnable priming coat with 1,39,238

124 13.41.1 cement primer Sqm. 750.00 185.65

13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of -

125 required shade :

New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming 41,920

coat of exterior primer applied @ 2.20 kg/ 10 sqm) -

13.62 Painting with synthetic enamel paint of approved brand and manufacture of required -

colour to give an even shade : -

13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary 18,100

paint of approved brand and manufacture -

129 13.68 French spirit polishing : - -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

130 13.68.1 Two or more coats on new works including a coat of wood filler sqm 90.00 446.25 40,163

131 WATER PROOFING - -

Providing and laying water proofing treatment in sunken portion of WCs, bathrooms 27,767

etc. by applying cement slurry mixed with water proofing cement comopund consisting

of applying: a) First layer of slurry of cement @ 0.488 kg./Sqm mixed with water

proofing cement comound @ 0.253 kg./Sqm. This layer will be allowed to air cure for 4

132 22.5 hours. b) Second layer of slurry of cement @ 0.242 kg./Sqm mixed with water proofing Sqm 45.00 617.05

cement comopund @ 0.126 kg./Sqm. This layer will be allowed to air cure for 4 hours

followed with water curing for 48 hours. The rate includes preparation of surface,

treatment and sealing of all joints, corners, junctions of pipes and masonary with

polymer mixed slurry.

133 ALUMINIUM WORK - -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with -

extruded built up standard tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of

required dia and size, including necessary filling up the gaps at junctions, i.e. at top,

134 21.1 bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections

shall be smooth, rust free, straight, mitred and jointed mechanically wherever required

including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass /

stainless steel screws, all complete as per architectural drawings and the directions of

Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : -

135 21.1.1 For fixed portion - -

136 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 1036.80 530.90 5,50,437 -

21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots -

and making provision for fixing of fittings wherever required including the cost of EPDM

rubber / neoprene gasket required (Fittings shall be paid for separately)

138 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 388.80 634.45 2,46,674 -

Providing and fixing glazing in aluminium door, window, ventilator shutters and -

partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the

architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap

beading shall be paid in basic item): -

140 21.3.2 With float glass panes of 5.0 mm thickness(wt not less then 12.5 kg/sqm) sqm 311.04 1505.25 4,68,193 -

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by -

providing weather silicon sealant over backer rod of approved quality as per architectural

141 21.8 drawings and direction of Engineer-in-charge complete.

142 21.8.1 Upto 5mm depth and 5 mm width Metre 300.00 96.75 29,025 -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener -

of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk

head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in

frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. -

145 SANITARY FIXTURE - -

Note:-1. All Sanitarty fixture shal be low flow as mentioned below , where

146 flow/ flush rate of fixture shall be equivalent or lesser at 3 bar pressure(

2. water closet flushing cistern (dual flush 3/6) urinals 2 lpm faucets -

147 (lavatory ,pantry,health) 6 lpm.

3.multiple sprinkler system native trees & vegetation shall be used. -

4.over flow rain water storage & reuse on site of at least 75% of total -

149 building water demand of 2 days shall be provide .

5. Desalting & grease trap system along with the proper flitation for rain -

150 water recharging shall be provided.

Providing white vitreous china wall hung type European W.C. pan with white plastic

seat and lid with C.P. brass hinges & rubber buffers, 3/6 liters dual flush type white

151 NS vitreous china low level flushing cistern fixed directly on W.C. pan with fittings and Each 10 9500.00 - 95,000

brackets complete.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 -

152 17.7 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,

cutting and making good the walls wherever require : -

White Vitreous China Wash basin size 630x450 mm with a 22,264

single 15 mm C.P. brass pillar tap -

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 -

with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and

154 17.10 brackets, cutting and making good the walls wherever required :

155 17.10.1 Kitchen sink with drain board - -

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as 5,174

per the direction of Engineer-in-charge. -

Providing & fixing PVC waste pipe for sink or wash basin including PVC waste fittings -

158 17.28 complete

159 17.28.1 Semi rigid pipe - -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Providing and fixing 15mm C.P brass Sink Mixer for kitchen sink with swinging spout Each -

161 NS complete. Including cutting and making good the walls wherever required . 2 4343.00

162 NS Providing and Fixing of C.P. Brass Shower set comprising of : - -

163 One No. CP brass Single Lever Concealed Diverter . - -

164 One No. CP brass OH shower head & Shower Arm . - -

165 One No. CP brass Bath Spout. - -

166 Including cutting and making good the walls wherever required. - -

167 NS Shower set as described above. Each 10 11298.46 - 1,12,985

Providing and fixing 600 x 450mm bevelled edge mirror of superior glass (of 16,080

168 17.31 approved quality) complete with 6mm thick hard board ground fixed to wooden cleats Each 10 1607.95

with CP brass screws and washers complete. -

169 17.34 Providing and fixing toilet paper holder : - -

Providing and fixing PTMT towel rail complete with brackets fixed to -

171 17.73 wooden cleats with CP brass screws with concealed fittings arrangement of approved

quality and colour. -

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height 7,090

of 88 mm, weighing not less than 190 gms -

Providing and fixing health faucet with 1 m long flexible tube and wall hook including all -

fittings approved quality. 12,913

174 18.49 Providing & fixing CP brass bib cock of approved quality conforming IS 8931: - -

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS -

standards and weighing not less than 690 gms. -

Providing and fixing CP brass angle valve for basin mixer and geyser points of approved -

quality confirming IS: 8931: -

180 WATER SUPPLY - -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability -

for hot & cold water supply, including all CPVC plain & brass threaded fittings, including

181 18.7 fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and testing of joints complete as per direction of

Engineer in Charge. -

182 Internal work - Exposed on wall - -

183 18.7.1 15 mm nominal outer dia Pipes Metre 2 286.80 574 -

184 18.7.2 20 mm nominal outer dia Pipes Metre 262 335.00 87,770 -

185 18.7.3 25 mm nominal outer dia Pipes Metre 90 401.55 36,140 -

186 18.7.4 32 mm nominal outer dia Pipes Metre 30 518.75 15,563 -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability -

for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing

the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with

one step CPVC solvent cement and the cost of cutting chases and making good the

same including testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc. -

189 18.8.1 15 mm nominal outer dia Pipes Metre 10 497.80 4,978 -

190 18.8.2 20 mm nominal outer dia Pipes Metre 40 537.60 21,504 -

191 18.8.3 25 mm nominal outer dia Pipes Metre 2 627.25 1,255 -

192 18.8.4 32 mm nominal outer dia Pipes Metre 10 739.30 7,393 -

Providing and placing on terrace (at all floor levels) polythene water storage tank of 27,500

approved brand and manufacture with cover and suitable locking arrangement and

making necessary holes for inlet , outlet and overflow pipes but without fittings and the

base support for tank. -

Providing and fixing forged brass ball valve of brass body with hard chrome plated steel -

194 ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP

threads complete in all respects. -

195 NS 20 mm nominal bore Each 10 587.23 - 5,872

196 NS 25 mm nominal bore Each 10 930.58 - 9,306

197 NS 32 mm nominal bore Each 5 1554.00 - 7,770

198 INTERNAL DRAINAGE -

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm 274

diameter and weighing not less than 440 grams. -

Providing and fixing Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: -

3989 soil, waste and vent pipes . -

203 17.4 Providing and fixing bend of required degree with access door, insertion rubber washer

3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS - 3989. -

Providing and fixing plain bend of required degree Sand cast iron S&S as per IS - 3989. -

208 DSR-17.40 Providing and fixing heel rest sanitary bend. - -

210 17.40.1.2 Sand cast iron S&S as per IS - 3989 Each 8 548.70 4,390 -

211 17.42 Providing and fixing double equal plain junction of required degree. - -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

213 17.42.1.2 Sand cast iron S&S as per IS - 3989 Each 5 1075.05 5,375 -

Providing and fixing single equal plain junction of required degree with access door, -

insertion rubber washer 3 mm thick, bolts and nuts complete. -

216 17.43.1.2 Sand cast iron S&S as per IS - 3989 Each 12 925.70 11,108 -

217 17.44 Providing and fixing single equal plain junction of required degree. - -

219 17.44.1.2 Sand cast iron S&S as per IS - 3989 Each 10 811.90 8,119 -

221 17.44.2.2 Sand cast iron S&S as per IS - 3989 Each 10 561.20 5,612 -

222 17.48 Providing and fixing single unequal plain junction of required degree. - -

224 17.48.1.2 Sand cast iron S&S as per IS - 3989 Each 10 1032.40 10,324 -

225 17.6 Providing and fixing terminal guard.Sand cast iron S&S as per IS - 3989. - -

228 17.57 Providing and fixing collar.Sand cast iron S&S as per IS - 3989. - -

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and -

fittings of diameter : -

Providing and fixing MS Stay clamps for sand cast iron/ centrifugally cast (spun) iron -

pipes of diameter. -

Providing and fixing trap of self cleansing design with screwed down or hinged with or -

237 17.60 without vent arm complete, including cost of cutting and making good the walls and

238 17.60.1 100 mm inlet and 100 mm outlet - -

239 17.60.1.1 Sand cast iron S&S as per IS - 3989 Each 14 1996.50 27,951 -

Painting sand cast iron/ centrifugally cast (spun) soil, waste, vent pipes and fittings with -

240 17.65 paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of

approved quality) for new work. -

241 17.65.1 100 mm diameter pipe Metre 70 82.80 5,796 -

242 17.65.2 75 mm diameter pipe Metre 50 62.95 3,148 -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Providing and fixing uPVC agricultural pipes conforming to IS:4985 (6 kg/sqcm) -

including all fittings, e.g. couplings, tees, bends, reducers and screwed adoptors

jointing with solvent cement joint as per manufacturers' recommendations. [for Rain

Water Pipes] -

Providing and fixing of GI split pipe support clamps with EPDM rubber lining, Zinc plated -

for support of vertical/hanging horizontal soil, waste, vent and rain water pipes,

247 embedded in walls with anchor fastner, including recommended size GI threaded rod of

required length etc. including cost of cutting holes and making good the walls complete

in all respects. -

248 NS For 75 mm dia Pipe (Thickness of clamp 1.7 mm) Each 10 375.19 - 3,752

249 NS For 100 mm dia Pipe (Thickness of clamp 2.0 mm) Each 15 383.72 - 5,756

Providing and fixing cast brass floor clean out plug with suitable insert keys for opening, -

male threaded joint with GI threaded socket drip seal to soil / waste pipe of CI pipe as

required complete as per drawing approved sample and direction of engineer in charge.

Providing and fixing in position 100x50 mm dia GI reducing elbow including fix to floor -

with cement mortar. 1,870

Providing and fixing 100 mm dia. GI inlet fitting/ Extension Piece with 2 or 3 inlets of 32 -

253 NS to 50 mm dia, fixed to CI trap with Drip Seal joint and set in cement concrete as per Each 7 2022.15

drawing complete. 14,155

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of -

cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of

joints etc. complete :

256 2.10.1 All kinds of soil 2.00 - -

257 2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia Metre 5.00 352.15 1,761 -

258 EXTERNAL SEWEGE SYSTEM - -

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in -

foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),

including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting

out the excavated soil and disposal of surplus excavated soil as directed, within a lead of

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Excavating trenches of required width for pipes, cables, etc including excavation for -

sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting

261 2.10 out the excavated soil, and then returning the soil as required, in layers not exceeding

20 cm in depth, including consolidating each deposited layer by ramming, watering, etc.

and disposing of surplus excavated soil as directed, within a lead of 50 m :

262 2.10.1 All kinds of soil. - -

263 2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 36 352.15 12,677 -

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth -

264 2.11 exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for

depth upto 1.5 metre). -

265 a. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 1 447.23 447 -

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations 196

266 2.25 etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by

ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 1 196.00 -

267 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / - -

268 banking excavated or stacked materials. - -

269 2.26.1 All kinds of soil Cum 1 126.00 126 -

Providing and laying in position cement concrete of specified grade excluding the cost of -

centering and shuttering - All work up to plinth level : -

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded 19,556

stone aggregate 40 mm nominal size derived from natural sources) Cum 3 6518.60 -

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating -

brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size

272 19.4 (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than

2.70 kg as per standard design: -

274 19.4.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 4 2802.15 11,209 -

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand)

with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded

stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4

275 19.7 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside

plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with

floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :

2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating

coat of neat cement complete as per standard design : -

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) -

276 19.7.1 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38

kg (weight of cover 23 kg and weight of frame 15 kg) : -

277 19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1 12770.55 12,771 -

278 19.8 Extra for depth for manholes : - -

280 19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1 8825.40 8,825 -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as

per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross

section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm

with minimum 112 mm space between protruded legs having 2 mm tread on top surface

by ribbing or chequering besides necessary and adequate anchoring projections on tail

281 19.16 length on 138 mm as per standard drawing and suitable to with stand the bend test and Each 50 487.10 24,355

chemical resistance test as per specifications and having manufacture's permanent

identification mark to be visible even after fixing, including fixing in manholes with

30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size) complete as per design.

Constructing brick masonary circular type manhole 0.91m internal dia at bottom and -

0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) in side cement

plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a

282 19.9 floating coat of neat cement, foundation concrete 1 :3:6 mix (1 cement : 3 coarse sand

: 6 graded 40mm nominal size), and making necessary channel in cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

finished with a floating coat of neat cement all complete as per standard design:

0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) -

560mm internal diameter confirming to I.S. 12592, total weight of cover and frame to

283 19.9.1 be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) including centering shuttering all

complete. (Excavation, foot rests and 12 mm thick cement plaster at the external

surface shall be paid for separately) : -

284 19.9.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1 12725.00 12,725 -

Extra depth for circular type manhole 0.91m internal dia (at bottom) with beyond 0.91m -

286 19.10.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1 7591.80 7,592 -

Providing, laying and jointing HDPE Double Wall Coil (DWC) SN-8 Grade pipes -

confirming to IS: 16098 including all fittings wherever required e.g., tees, bends of any

degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer

recommondation etc. including testing of joints etc. complete. -

289 Storm Water Drainage System - -

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in -

foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),

290 2.8 including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting

out the excavated soil and disposal of surplus excavated soil as directed, within a lead of

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Excavating trenches of required width for pipes, cables, etc including excavation for -

sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting

292 2.10 out the excavated soil, and then returning the soil as required, in layers not exceeding

20 cm in depth, including consolidating each deposited layer by ramming, watering, etc.

and disposing of surplus excavated soil as directed, within a lead of 50 m :

293 2.10.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 10 352.15 3,522 -

294 2.10.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. Metre 6 549.75 3,299 -

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth -

295 2.11 exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for

depth upto 1.5 metre). -

296 a. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 10 447.23 4,472 -

297 b. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. Metre 6 698.18 4,189 -

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations 1,960

298 2.25 etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by

ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 10 196.00 -

299 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / - -

300 banking excavated or stacked materials. - -

Providing and laying in position cement concrete of specified grade excluding the cost of -

centering and shuttering - All work up to plinth level : -

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded 19,556

stone aggregate 40 mm nominal size derived from natural sources) Cum 3 6518.60 -

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded -

304 19.3 stone aggregate 40mm nominal size) up to haunches of S.W/RCC pipes including bed

concrete as per standard design. -

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as 2,769

per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross

section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm

with minimum 112 mm space between protruded legs having 2 mm tread on top surface

by ribbing or chequering besides necessary and adequate anchoring projections on tail

308 19.16 length on 138 mm as per standard drawing and suitable to with stand the bend test and Each 5 553.70

chemical resistance test as per specifications and having manufacture's permanent

identification mark to be visible even after fixing, including fixing in manholes with

30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size) complete as per design.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed -

309 19.6 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand)

including testing of joints etc. complete : -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand)

with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded

stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4

314 19.7 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside

plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with

floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :

2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating

coat of neat cement complete as per standard design : -

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) -

315 19.7.1 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38

kg (weight of cover 23 kg and weight of frame 15 kg) : -

316 19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1 12770.55 12,771 -

317 19.8 Extra for depth for manholes : - -

319 19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1 8825.40 8,825 -

Constructing brick masonary circular type manhole 0.91m internal dia at bottom and -

0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) in side cement

plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a

320 19.9 floating coat of neat cement, foundation concrete 1 :3:6 mix (1 cement : 3 coarse sand

: 6 graded 40mm nominal size), and making necessary channel in cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

finished with a floating coat of neat cement all complete as per standard design:

0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) -

560mm internal diameter confirming to I.S. 12592, total weight of cover and frame to

321 19.9.1 be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) including centering shuttering all

complete. (Excavation, foot rests and 12 mm thick cement plaster at the external

surface shall be paid for separately) : -

322 19.9.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1 12725.00 12,725 -

Extra depth for circular type manhole 0.91m internal dia (at bottom) with beyond 0.91m -

324 19.10.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1 7591.80 7,592 -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia -

at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm

thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of

325 19.11 neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4

(1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with

a floating coat of neat cement, all complete as per standard design :

1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm -

internal diameter conforming to I.S. 12592, total weight of cover and frame to be not

326 19.11.1 less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate 20mm nominal size) including centering, shuttering all complete.

(Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be

paid for separately) : -

327 19.11.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1 24702.75 24,703 -

Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to -

329 19.12.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1 9861.45 9,861 -

Constructing bricks masonry road gully chamber 50x45x60 cm with bricks in cement -

330 19.27 mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal

grating with frame complete as per standard design : -

331 19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 2 5957.90 11,916 -

332 19.31 Extra for depth beyond 45 cm of brick masonry chamber - -

334 19.31.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1 6117.00 6,117 -

335 WIRING - -

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS -

PVC insulated copper conductor single core cable in surface / recessed medium class

PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point

with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. -

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed medium class PVC conduit, 2 way modular switch,

modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC

insulated copper conductor single core cable etc as required.

Wiring for light/power plug with 2x4 Sq.mm FRLS PVC insulated, copper conductor,

339 1.12 single core cable in surface/recessed PVC conduit alongwith 1 No. 4 Sq.mm FRLS PVC Metre 185.00 334.00

insulated copper conductor single core cable for loop earthing as required. -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Wiring for light/power plug with 4x4 Sq.mm FRLS PVC insulated, copper conductor,

340 1.13 single core cable in surface/recessed PVC conduit alongwith 2 Nos. 4 Sq.mm FRLS PVC Metre 50.00 537.00

insulated copper conductor single core cable for loop earthing as required. -

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS -

341 1.14 PVC insulated copper conductor, single core cable in surface/ recessed medium class

PVC conduit as required -

Supplying and fixing of following sizes of medium class PVC conduit along with -

347 1.21 accessories in surface/recess including cutting the wall and making good the same in

case of recessed conduit as required. -

Supplying and fixing stepped type electronic fan regulator on the existing modular plate

switch box including connections but excluding modular plate etc. as required. -

Supplying and fixing modular blanking plate on the existing modular plate & switch box 800

excluding modular plate as required. -

Supplying and fixing following size/ modules, GI box alongwith modular base & cover

plate for modular switches in recess etc as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on

356 1.32 surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular Each 30.00 586.00

socket outlet and 15/16 amps modular switch, connection etc. as required. -

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact 14,420

fluorescent fitting of all types, complete with all accessories and tube etc. directly on

ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper

conductor, single core cable and earthing etc. as required. -

Installation, testing and commissioning of ceiling fan, including wiring the down rods of

standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor,

single core cable, including providing and fixing phenolic laminated sheet cover on the

fan box etc. as required.(BEE 5 Star ceiling Fans.)

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Installation of exhaust fan in the existing opening, including making good the damage, -

connection, testing, commissioning etc. as required. -

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole 29,178

and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet

steel enclosure, on surface or in recess, with chained metal cover for the socket out let

and complete with connections, testing and commissioning etc. as required. -

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete

with G.I. fittings including trenching (75 cm deep)and re-filling etc. as required -

364 MCCB, MCB & DB's - -

Supplying and fixing following way, single pole and neutral, sheet steel ,MCB distribution -

board, 240 volts, on surface/ recess, complete with tinned copper busbar, neutral bus

bar, earth bar, din bar, interconnections powder painted including earthing etc. as

required. (But with out MCB/RCCB/ Isolator). -

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel -

,MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper

367 2.4 busbar, neutral bus bar, earth bar, din bar, interconnections powder painted including

earthing etc. as required. (But with out MCB/RCCB/ Isolator).

supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C Curve, miniature circuit -

369 2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete

with connectoin testing and commissioning etc.as required. -

supplying and fixing following rating,double pole,240 V,isolator in the existing MCB DB -

complete with connectoin testing and commissioning etc.as required. -

supplying and fixing following rating,four pole,415 V,isolator in the existing MCB DB -

complete with connectoin testing and commissioning etc.as required. -

supplying and fixing following rating,double pole,240 V,residual current circuit breaker -

375 2.14 (RCCB),having a sensitivity currrent 30 mA in the eiting MCB DB completed with

connection ,teting commisoining etc.as required. -

377 EARTHING - -

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and

378 5.2 providing masonry enclosure with cover plate having locking arrangement and watering Each 2.00 6855.00

pipe etc. with charcoal/ coke and salt as required.

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth

electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as

required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring

washer spaced at 50mm)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along

with existing surface/ recessed conduit/ submain wiring/ cable as required. Meter 40 42.00 -

381 FITTING & FIXTURES - -

Supply of 1750-2200 LUMEN, 2700-3300 K LED Batten Light fixture Surface mounted. ( -

382 NS similar specification of other approved makes) (Efficient lighting desing with led Each 60.00 874.00

light with efficacy of 100 lumen/watt.) 52,440

Supply of 800-1000 LUMEN,3600-4400 K, LED Light fixture ( similar specification of -

383 NS other approved makes) (Efficient lighting desing with led light with efficacy of Each 10.00 458.00

100 lumen/watt.) 4,580

384 b. Supplying of 1200mm sweep ceiling fan ( BEE 5 star rated) of approved make. Each 15.00 3500.00 - 52,500

Supplying of approved make Exaust Fan of the following size and its all accessories

suitable for operation on 230V single phase, 50 Hz, AC supply complete as required.

387 SOLAR Lighting System - -

Roof mounted Grid Connecting solar system having transformer less inverter, Peak -

efficiency > 98%, connect upto multiple sting PV arrays, easy and fast connections, built

in string level monitoring and having IP-65 protection level with all fixing accessories &

mounting structure. kW 5 60000 3,00,000

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Bill of Quantities

Type-III-04 Residential Quarter (G +1)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

2.6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means

over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan)

2 including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth

to be levelled and neatly dressed.

4 2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia meter 10.00 352.15 3,522 -

2.10.1.3 Pipes, cables etc. exceeding 300 mm dia but not

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by

6 2.25 ramming and watering, lead up to 50 m and lift up to 1.5 m. cum 25.00 196.00 4,900 -

2.27 Supplying and filling in plinth with Jamuna sand / river under floors including watering,

7 ramming consolidating and dressing complete. Cum 5.00 2123.75 10,619 -

8 2.34 Supplying chemical emulsion in sealed containers including delivery as specified. - -

9 2.34.1 Chlorpyriphos/Lindane Emulsifiable concentrate of 20%. Litre. 5.00 234.75 1,174 -

Along the external wall below concrete or masonry apron using chemical emulsion @ -

10 2.25 litres per linear metre including drilling and plugging holes etc.: -

11 2.35.2.1 With Chlorpyriphos /Lindane E C. 20% with 1% concentration. metre 45.00 53.45 2,405 -

treatment under floor using chemical emulsion (excluding the cost of chemical -

Treatment of soil once the excavation is over the entire carpet area shall be chemically

13 treated by making 12 mm dia holes at 150 c/c and 50-75 mm deep and applying Sqm 54.00 170.00 - 9,180

insecticide emulsion under pressure @5l/sqm of the horizontal surface area (as per IS

14 CONCRETE WORK -

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of -

15 cantering and shuttering - All work up to plinth level -

4.1.10 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

4.10 Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1

17 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size). Sqm 21.85 410.85 8,977 -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

4.12 Extra for providing and mixing water proofing material in cement concrete work in doses Per 50

18 by weight of cement as per manufacturer’s specification kg 82.00 18.15 1,488 -

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand

: 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick

ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand

including finishing the top smooth

20 Formwork - -

5.9 Centring and shuttering including strutting, propping etc. and removal of form for: -

22 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. sqm 149.36 392.15 58,572 -

23 5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 429.80 927.25 3,98,532 -

24 5.9.5 Lintels, beams, plinth beams, girders, bressummers and cantilevers. Sqm 429.80 736.40 3,16,505 -

25 5.9.6 Columns, Pillars, Piers, Abutments, posts and Struts Sqm 264.00 961.30 2,53,783 -

5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in -

position and binding all complete up to plinth level

27 5.22.6 Thermo-Mechanically Treated bars kg 2502.00 107.85 2,69,841 -

5.22 A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in -

position and binding all complete above plinth level.

29 5.22A.6 Thermo-Mechanically Treated bars kg 9568.58 107.85 10,31,971 -

5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C.

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement -

concrete work, using cement content as per approved design mix, manufactured in fully

automatic batching plant and transported to site of work in transit mixer for all leads,

having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site

31 5.33 of laying , excluding the cost of cantering, shuttering finishing and reinforcement, -

including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength and durability

as per direction of the Engineer - in - charge.

(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement

used as per design mix is payable/recoverable separately).

32 5.33.1 All works up to plinth level. cum 25.02 9333.95 2,33,535 -

33 5.33.2 All works above plinth level up to floor V level. cum 95.69 9689.60 9,27,157 -

34 BRICK WORK - -

6.1 Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5 -

in foundation & plinth in:

36 6.1.2 Cement mortar 1:6 (1 cement: 6 coarse sand) cum 7.59 7132.25 54,134 -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 -

37 in superstructure above plinth level up to floor V level in all shapes and sizes in : -

38 6.4.2 Cement mortar 1: 6(1 cement: 6 coarse sand) cum 72.39 9105.95 6,59,185 -

6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class -

designation 7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement: 4 coarse sand)

6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third

course of half brick masonry.

Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry Providing and

laying Autoclaved Aerated concrete(AAC) blocks masonry

100 mm/ 125 mm thick with Grade-1 AAC blocks of density 551 to 650

6.38 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth cum 5 10195.45 50,977

level up to floor V level in cement mortar 1 :4 (1 cement: 4 coarse sand ).

The rate includes providing and placing in position 2 Nos 6 mm dia M.S.

bars at every third course of masonry work.

42 MARBLE WORK - -

8.2 Providing and fixing 18mm thick gang saw cut mirror polished remoulded and -

repolished) machine cut for kitchen platforms, vanity counters, window sills , facias and

similar locations of required size of approved shade, colour and texture laid over 20mm

43 thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white -

cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high gloss finish etc. complete at all levels.

8.3 Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including -

45 machine polishing to edge to give high gloss finish etc. complete as per design approved -

by Engineer-in-Charge.

46 8.3.1 Marble work. metre 298.60 - -

47 8.3.2 Granite work metre 510.95 - -

8.4 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia

48 and drops of width up to 150 mm with epoxy resin based adhesive, including cleaning metre 12.00 568.55 6,823 -

8.5 Extra for providing opening of required size & shape for wash basins / kitchen sink in -

kitchen platform, vanity counters and similar location in marble / Granite / stone work

including necessary holes for pillar taps etc. Including rubbing and polishing necessary

50 WOOD WORK - -

9.21 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) -

non-decorative type, core of block board construction with frame of 1st class hard wood

and well matched commercial 3 ply veneering with vertical grains or cross bands and

face veneers on both faces of shutters :

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on

53 9.23 all edges of flush door shutters (over all area of door shutter to be measured). sqm 35.52 462.35 16,423 -

9.26 Extra for cutting rebate in flush door shutters (Total area of the shutter to be

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in -

gloss / matt / suede finish with high density protective surface layer and reverse side of

adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of

approved quality.

9.62 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws -

etc. complete :

9.76 Providing & fixing bright finished brass 100mm mortice latch and lock with 6 levers and

59 a pair of lever handles with necessary screws etc. complete (Best make of approved Each 4.00 854.65 3,419 -

9.83 Providing & fixing IS:3564 marked aluminium Die cast body tubular type universal

60 hydraulic door closer with necessary accessories and screws etc. complete Each 12.00 1124.85 13,498 -

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board -

or graded wood particle board IS : 3087 marked, with one side decorative and other

61 9.18 side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves -

with screws and fittings wherever required, edges to be painted with polyurethane

primer (fittings to be paid separately).

9.91 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with

9.92 Providing and fixing chromium plated brass handles with necessary screws etc. -

9.79 Providing & fixing special quality bright finished brass Cupboard or ward robe locks with -

66 four levers including necessary screws etc. complete (best make of approved quality). -

9.114 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe -

shutters, including fixing with necessary screws etc. complete.

69 9.114.1 Triple strip vertical type Each - -

70 9.114.2 Double strip (horizontal type) Each 8.00 39.70 318 -

9.47 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

9.96 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating -

73 not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or -

shade with nuts and screws etc. complete:

9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less -

76 than grade AC 10 as per IS : 1868 ) transparent or dyed toreqired colour or shade with -

necessary screws etc.

9.100 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less -

79 than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with -

necessary screws etc. complete :

9.101 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic -

coating not less than grade AC 10 as per IS :1868) transparent or dyed to required

colour or shade with necessary screws etc. complete:

82 9.101.2 Twin rubber stopper Each 20.00 72.25 1,445 -

9.135 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and -

83 clerestory windows using wire gauge with average width of aperture 1.4 mm in both -

directions with wire of dia. 0.50 mm all complete.

84 9.135.2 With 12 mm mild steel U beading sqm 43.73 1228.00 53,694 -

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall

thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners

and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the

85 9.119 vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 metre 40.40 492.70 19,905 -

gauge, EPDM rubber gasket weather seal to be provided through out the frame. The

door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as

per manufacturer’s specification and direction of Engineer-in-Charge.

Providing and fixing factory made panel PVC door shutter consisting of frame made -

out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and

15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of

approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded

PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat

and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm

thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be

tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide

PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to

form lock rail.

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) -

thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail,

paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/

sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet

87 beading on inner side, and joined together with solvent cement adhesive. An additional -

5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’

Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-

charge, manufacturer’s specification & drawing.

88 9.120.2 30 mm thick pre laminated PVC door shutters sqm 12.60 3,663.80 46,164 -

89 STEEL WORK - -

10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed

90 work, including cutting, hoisting, fixing in position and applying a priming coat of Kg. 438.24 113.70 49,828 -

approved steel primer all complete:

10.14 Providing and fixing pressed steel door frames conforming to IS: 4351, -

manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges,

jamb, lock jamb, bead and if required angle threshold of mild steel angle of section

50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together

by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar

guards, lock strike plate and shock absorbers as specified and applying a coat of

approved steel primer after pre-treatment of the surface as directed by Engineer-in-

93 10.14.3.1 Fixing with adjustable lugs with split end tail to each jamb metre 35.52 640.20 22,740 -

10.15 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard -

with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred,

94 welded and grinded finish, with profiles of required size, including fixing of necessary -

butt hinges and screws and applying a priming coat of approved steel primer.

10.15.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm

95 of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal Kg 15.00 195.20 2,928 -

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan

clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its

top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S.

96 10.18 sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp Each 16.00 220.65 3,530 -

shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature

(wherever required) and fitting the same with necessary stainless steel nuts and bolts

97 10.28 complete, i/c fixing the railing with necessary accessories & stainless steel dash Kg 84.00 772.40 64,882 -

fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side

of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for

payment purpose only weight of stainless steel members shall be considered excluding -

Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm Painting top -

of roofs with bitumen of approved quality @ 17kg per 10 sqm

impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including

cleaning the slab surface with brushes and finally with a piece of cloth

lightly soaked in kerosene oil complete :

100 12.15.1 With residual type petroleum bitumen of grade VG -10 sqm 166.2 - -

Providing corrugated G.S. sheet roofing including vertical/ curved surface Providing

corrugated G.S. sheet roofing including vertical/ curved surface

fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter

with bitumen and G.I. limpet washers or with G.I. limpet washers filled

101 with white lead, including a coat of approved steel primer and two coats sqm 180.00 1457.15 2,62,287 -

of approved paint on overlapping of sheets complete (up to any pitch

in horizontal/ vertical or curved surfaces), excluding the cost of purlins,

rafters and trusses and including cutting to size and shape wherever

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

102 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 -

cement : 3 fine sand) as per standard design :

104 FLOORING - -

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey -

105 11.26 cement slurry mixed with pigment to match the shade of the slab, including rubbing and -

polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting,dado and pillars laid on 12 mm

(average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey

cement slurry mixed with pigment to match the shade of the slabs, including rubbing

and polishing complete.

Providing & laying rectified glazed ceramics floor tiles 300x300mm or more

(thickness to be specified by the manufacturer) of Ist quality conforming to IS:15622 of

108 11.39 approved make in colours White, Ivory, Grey, Fume, Red Brown, laid on 20 mm thick sqm 91.73 1330.00 1,21,998 -

cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white

cement and matching pigments etc. complete.

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Providing and laying Vitrified tiles in floor in different sizes (thickness to be -

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS: 15622, of approved brand & manufacturer, in all colours

and shade, laid on 20 mm thick cement mortar 1 :4 (1 cement: 4 coarse

109 11.41 sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the -

joints with white cement and matching pigments etc. The tiles must be cut

with the zero chipping diamond cutter only . Laying of tiles will be done

with the notch trowel, plier, wedge, clips of required thickness, leveling

system and rubber mallet for placing the tiles gently and easily.

110 11.41A.1 Double charge vitrified tile polished finish of size - -

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622

(thickness to be specified by the manufacturer ) of approved make in all colours, shades

except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in

skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1

112 8.31 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including sqm 195.22 1267.95 2,47,524 -

pointing in white cement mixed with pigment of matching shade complete

113 FINISHING - -

114 13.4 12 mm cement plaster of mix : - -

116 13.16 6 mm cement plaster to ceiling of mix : - -

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1

118 13.11 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 Sqm 300.00 518.55 1,55,565 -

cement : 6 fine sand).

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to

prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to -

120 13.41 give an even shade : -

New work (two or more coats) over and including water tinnable priming coat with

13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of

122 required shade : 300.00 - -

New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming

coat of exterior primer applied @ 2.20 kg/ 10 sqm)

13.62 Painting with synthetic enamel paint of approved brand and manufacture of required -

colour to give an even shade :

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary

paint of approved brand and manufacture

126 13.68 French spirit polishing : - -

127 13.68.1 Two or more coats on new works including a coat of wood filler sqm 80.00 446.25 35,700 -

128 WATER PROOFING - -

Providing and laying water proofing treatment in sunken portion of WCs, bathrooms

etc. by applying cement slurry mixed with water proofing cement comopund consisting

of applying: a) First layer of slurry of cement @ 0.488 kg./Sqm mixed with water

proofing cement comound @ 0.253 kg./Sqm. This layer will be allowed to air cure for 4

129 22.5 hours. b) Second layer of slurry of cement @ 0.242 kg./Sqm mixed with water proofing Sqm 25.00 617.05 15,426 -

cement comopund @ 0.126 kg./Sqm. This layer will be allowed to air cure for 4 hours

followed with water curing for 48 hours. The rate includes preparation of surface,

treatment and sealing of all joints, corners, junctions of pipes and masonary with

polymer mixed slurry.

130 ALUMINIUM WORK - -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with -

extruded built up standard tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of

required dia and size, including necessary filling up the gaps at junctions, i.e. at top,

bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections

131 21.1 shall be smooth, rust free, straight, mitred and jointed mechanically wherever required -

including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass /

stainless steel screws, all complete as per architectural drawings and the directions of

Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

132 21.1.1 For fixed portion - -

133 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 113.58 530.90 60,300 -

21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots -

and making provision for fixing of fittings wherever required including the cost of EPDM

rubber / neoprene gasket required (Fittings shall be paid for separately)

135 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 104.94 634.45 66,579 -

Providing and fixing glazing in aluminium door, window, ventilator shutters and -

partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the

architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap

beading shall be paid in basic item):

137 21.3.2 With float glass panels of 5.0 mm thickness(wt. not less then 12.5 kg/sqm) sqm 27.98 1505.25 42,123 -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by -

providing weather silicon sealant over backer rod of approved quality as per architectural

138 21.8 drawings and direction of Engineer-in-charge complete. -

139 21.8.1 Upton 5mm depth and 5 mm width Metre 145.00 96.75 14,029 -

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener -

of 10 mm Dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk

head, comprising of 10 m Dia polyamide PA 6 grade sleeve, including drilling of hole in

frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.

Providing and fixing false ceiling at all heights with integral densified Providing and

fixing false ceiling at all heights with integral densified

calcium silicate reinforced with fibre and natural filler false ceiling

tiles of Size 595x595mm of approved texture, design and patterns

as per CPWD Specification 2019, to be laid in true horizontal level

suspended on inter-locking metal T-Grid of hot dipped galvanised

iron section of 0.33mmthick (galvanized @ 120 grams per sqm

including both sides)comprising of main-T runners of size 24x38

mm of length 3000 mm,cross - T of size 24x32 mm of length

1200 mm and secondary intermediate cross-T of size 24x32 mm

142 26.22.1 of length 600mm to formgrid module of size 600 x 600 mm, Sqm 122.76 2207.00 2,70,936 -

suspended from ceiling usinggalvanised mild steel items (galvanizing

@ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia

fully threaded hanger rod upto 1000 mm length and L-shape level

adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size

25x37x25x1.6mm thick with precut hole on both 25mm flange to

pierce into 12x50mm or even bigger size dash fastener if require,

fixed with Glavanised iron perimeter wall angle or size 24x24x0.40

mm of length 3000 mm to be fixed on periphey wall / partition with

the help of plastic rawl plugs at 450mm center to center and 40 mm

long dry wall S.S screws. The workshall be carried out as per

147 SANITARY FIXTURE - -

Note:-1. All Sanitarty fixture shal be low flow as mentioned below , where

148 flow/ flush rate of fixture shall be equivalent or lesser at 3 bar pressure( -

2. water closet flushing cistern (dual flush 3/6) urinals 2 lpm faucets -

149 (lavatory ,pantry,health) 6 lpm. -

3.multiple sprinkler system native trees & vegetation shall be used. -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

4.over flow rain water storage & reuse on site of at least 75% of total -

151 building water demand of 2 days shall be provide . -

5. Desalting & grease trap system along with the proper flitation for rain -

152 water recharging shall be provided. -

Providing white vitreous china wall hung type European W.C. pan with white plastic

seat and lid with C.P. brass hinges & rubber buffers, 3/6 liters dual flush type white

vitreous china low level flushing cistern fixed directly on W.C. pan with fittings and

brackets complete.

17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 -

155 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, -

cutting and making good the walls wherever require :

17.7.2 White Vitreous China Wash basin size 630x450 mm with a

single 15 mm C.P. brass pillar tap

17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 -

with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and

157 brackets, cutting and making good the walls wherever required : -

158 17.10.1 Kitchen sink with drain board - -

17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as

per the direction of Engineer-in-charge.

17.28 Providing & fixing PVC waste pipe for sink or wash basin including PVC waste fittings -

161 complete -

162 17.28.1 Semi rigid pipe - -

NS-52 Providing and fixing 15mm C.P brass Sink Mixer for kitchen sink with swinging spout Each

164 complete. Including cutting and making good the walls wherever required . 4 4343.00 - 17,372

165 NS-59 Providing and Fixing of C.P. Brass Shower set comprising of : - -

166 One No. CP brass Single Lever Concealed Diverter . - -

167 One No. CP brass OH shower head & Shower Arm . - -

168 One No. CP brass Bath Spout. - -

169 Including cutting and making good the walls wherever required. - -

170 Shower set as described above. Each 8 11298.46 - 90,388

17.31 Providing and fixing 600 x 450mm bevelled edge mirror of superior glass (of

171 approved quality) complete with 6mm thick hard board ground fixed to wooden cleats Each 8 1607.95 12,864 -

with CP brass screws and washers complete.

172 17.34 Providing and fixing toilet paper holder : - -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

17.73 Providing and fixing PTMT towel rail complete with brackets fixed to -

174 wooden cleats with CP brass screws with concealed fittings arrangement of approved -

quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height

of 88 mm, weighing not less than 190 gms

Providing and fixing health faucet with 1 m long flexible tube and wall hook including all

fittings approved quality.

177 18.49 Providing & fixing CP brass bib cock of approved quality conforming IS 8931: - -

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS -

standards and weighing not less than 690 gms.

Providing and fixing CP brass angle valve for basin mixer and geyser points of approved -

quality confirming IS: 8931:

183 WATER SUPPLY - -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability -

for hot & cold water supply, including all CPVC plain & brass threaded fittings, including

184 18.7 fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings -

with one step CPVC solvent cement and testing of joints complete as per direction of

Engineer in Charge.

185 Internal work - Exposed on wall - -

186 18.7.1 15 mm nominal outer dia Pipes Metre 286.80 - -

187 18.7.2 20 mm nominal outer dia Pipes Metre 262 335.00 87,770 -

188 18.7.3 25 mm nominal outer dia Pipes Metre 90 401.55 36,140 -

189 18.7.4 32 mm nominal outer dia Pipes Metre 30 518.75 15,563 -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability -

for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing

the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with

one step CPVC solvent cement and the cost of cutting chases and making good the

same including testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc. -

192 18.8.1 15 mm nominal outer dia Pipes Metre 0 497.80 - -

193 18.8.2 20 mm nominal outer dia Pipes Metre 40 537.60 21,504 -

194 18.8.3 25 mm nominal outer dia Pipes Metre 627.25 - -

195 18.8.4 32 mm nominal outer dia Pipes Metre 739.30 - -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Providing and placing on terrace (at all floor levels) polythene water storage tank of

approved brand and manufacture with cover and suitable locking arrangement and

196 18.48 making necessary holes for inlet , outlet and overflow pipes but without fittings and the Litre 2000 11.00 22,000 -

base support for tank.

Providing and fixing forged brass ball valve of brass body with hard chrome plated steel -

197 ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP -

threads complete in all respects.

198 NS 20 mm nominal bore Each 10 587.23 - 5,872

199 NS 25 mm nominal bore Each 10 930.58 - 9,306

200 NS 32 mm nominal bore Each 5 1554.00 - 7,770

201 INTERNAL DRAINAGE - -

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm

diameter and weighing not less than 440 grams.

Providing and fixing Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: -

3989 soil, waste and vent pipes .

206 17.4 Providing and fixing bend of required degree with access door, insertion rubber washer -

3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS - 3989.

Providing and fixing plain bend of required degree Sand cast iron S&S as per IS - 3989. -

211 DSR-17.40 Providing and fixing heel rest sanitary bend. - -

213 17.40.1.2 Sand cast iron S&S as per IS - 3989 Each 8 548.70 4,390 -

214 17.42 Providing and fixing double equal plain junction of required degree. - -

216 17.42.1.2 Sand cast iron S&S as per IS - 3989 Each 5 1075.05 5,375 -

Providing and fixing single equal plain junction of required degree with access door, -

insertion rubber washer 3 mm thick, bolts and nuts complete.

219 17.43.1.2 Sand cast iron S&S as per IS - 3989 Each 12 925.70 11,108 -

220 17.44 Providing and fixing single equal plain junction of required degree. - -

222 17.44.1.2 Sand cast iron S&S as per IS - 3989 Each 10 811.90 8,119 -

224 17.44.2.2 Sand cast iron S&S as per IS - 3989 Each 10 561.20 5,612 -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

225 17.48 Providing and fixing single unequal plain junction of required degree. - -

227 17.48.1.2 Sand cast iron S&S as per IS - 3989 Each 10 1032.40 10,324 -

228 17.6 Providing and fixing terminal guard.Sand cast iron S&S as per IS - 3989. - -

231 17.57 Providing and fixing collar.Sand cast iron S&S as per IS - 3989. - -

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and -

fittings of diameter :

Providing and fixing MS Stay clamps for sand cast iron/ centrifugally cast (spun) iron -

pipes of diameter.

Providing and fixing trap of self cleansing design with screwed down or hinged with or -

240 17.60 without vent arm complete, including cost of cutting and making good the walls and -

241 17.60.1 100 mm inlet and 100 mm outlet - -

242 17.60.1.1 Sand cast iron S&S as per IS - 3989 Each 14 1996.50 27,951 -

Painting sand cast iron/ centrifugally cast (spun) soil, waste, vent pipes and fittings with -

243 17.65 paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of -

approved quality) for new work.

244 17.65.1 100 mm diameter pipe Metre 90 82.80 7,452 -

245 17.65.2 75 mm diameter pipe Metre 20 62.95 1,259 -

Providing and fixing uPVC agricultural pipes conforming to IS:4985 (6 kg/sqcm) -

including all fittings, e.g. couplings, tees, bends, reducers and screwed adoptors

jointing with solvent cement joint as per manufacturers' recommendations. [for Rain

Providing and fixing of GI split pipe support clamps with EPDM rubber lining, Zinc plated -

for support of vertical/hanging horizontal soil, waste, vent and rain water pipes,

250 embedded in walls with anchor fastner, including recommended size GI threaded rod of -

required length etc. including cost of cutting holes and making good the walls complete

in all respects.

251 NS For 75 mm dia Pipe (Thickness of clamp 1.7 mm) Each 10 375.19 - 3,752

252 NS For 100 mm dia Pipe (Thickness of clamp 2.0 mm) Each 15 383.72 - 5,756

253 NS For 150 mm dia Pipe (Thickness of clamp 2.0 mm) Each 0 535.99 - -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Providing and fixing cast brass floor clean out plug with suitable insert keys for opening, -

male threaded joint with GI threaded socket drip seal to soil / waste pipe of CI pipe as

required complete as per drawing approved sample and direction of engineer in charge.

Providing and fixing in position 100x50 mm dia GI reducing elbow including fix to floor

with cement mortar.

Providing and fixing 100 mm dia. GI inlet fitting/ Extension Piece with 2 or 3 inlets of 32

257 NS to 50 mm dia, fixed to CI trap with Drip Seal joint and set in cement concrete as per Each 10 2022.15 - 20,222

drawing complete.

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of -

cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of

joints etc. complete :

260 2.10.1 All kinds of soil - -

261 2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia Metre 5.00 352.15 1,761 -

262 EXTERNAL SEWEGE SYSTEM - -

2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in -

foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),

including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting

out the excavated soil and disposal of surplus excavated soil as directed, within a lead of

2.10 Excavating trenches of required width for pipes, cables, etc including excavation for -

sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting

265 out the excavated soil, and then returning the soil as required, in layers not exceeding -

20 cm in depth, including consolidating each deposited layer by ramming, watering, etc.

and disposing of surplus excavated soil as directed, within a lead of 50 m :

266 2.10.1 All kinds of soil. - -

267 2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 36 352.15 12,677 -

2.11 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth -

268 exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for -

depth upto 1.5 metre).

269 a. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 1 447.23 447 -

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

270 etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by 1 196.00 196 -

ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum

271 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / - -

272 banking excavated or stacked materials. - -

273 2.26.1 All kinds of soil Cum 1 126.00 126 -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

4.10 Providing and laying in position cement concrete of specified grade excluding the cost of -

centering and shuttering - All work up to plinth level :

4.1.10 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded

stone aggregate 40 mm nominal size derived from natural sources) Cum

19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating -

brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size

276 (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than -

2.70 kg as per standard design:

278 19.4.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 2 2802.15 5,604 -

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand)

with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded

stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4

279 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside -

plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with

floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :

2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating

coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) -

280 19.7.1 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 -

kg (weight of cover 23 kg and weight of frame 15 kg) :

281 19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 4 12770.55 51,082 -

282 19.8 Extra for depth for manholes : - -

284 19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1 8825.40 8,825 -

19.16 Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as

per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross

section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm

with minimum 112 mm space between protruded legs having 2 mm tread on top surface

by ribbing or chequering besides necessary and adequate anchoring projections on tail

285 length on 138 mm as per standard drawing and suitable to with stand the bend test and Each 10 487.10 4,871 -

chemical resistance test as per specifications and having manufacture's permanent

identification mark to be visible even after fixing, including fixing in manholes with

30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size) complete as per design.

19.9 Constructing brick masonary circular type manhole 0.91m internal dia at bottom and -

0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) in side cement

plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a

286 floating coat of neat cement, foundation concrete 1 :3:6 mix (1 cement : 3 coarse sand -

: 6 graded 40mm nominal size), and making necessary channel in cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

finished with a floating coat of neat cement all complete as per standard design:

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) -

560mm internal diameter confirming to I.S. 12592, total weight of cover and frame to

287 be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 -

graded stone aggregate 20 mm nominal size) including centering shuttering all

complete. (Excavation, foot rests and 12 mm thick cement plaster at the external

surface shall be paid for separately) :

288 19.9.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1 12725.00 12,725 -

19.10 Extra depth for circular type manhole 0.91m internal dia (at bottom) with beyond 0.91m -

290 19.10.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1 7591.80 7,592 -

Providing, laying and jointing HDPE Double Wall Coil (DWC) SN-8 Grade pipes -

confirming to IS: 16098 including all fittings wherever required e.g., tees, bends of any

degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer

recommondation etc. including testing of joints etc. complete.

293 Storm Water Drainage System - -

2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in -

foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),

294 including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting -

out the excavated soil and disposal of surplus excavated soil as directed, within a lead of

2.10 Excavating trenches of required width for pipes, cables, etc including excavation for -

sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting

296 out the excavated soil, and then returning the soil as required, in layers not exceeding -

20 cm in depth, including consolidating each deposited layer by ramming, watering, etc.

and disposing of surplus excavated soil as directed, within a lead of 50 m :

297 2.10.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 10 352.15 3,522 -

298 2.10.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. Metre 6 549.75 3,299 -

2.11 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth -

299 exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for -

depth upto 1.5 metre).

300 a. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 10 447.23 4,472 -

301 b. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. Metre 6 698.18 4,189 -

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

302 etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by 10 196.00 1,960 -

ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum

303 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / - -

304 banking excavated or stacked materials. - -

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of -

centering and shuttering - All work up to plinth level :

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

4.1.10 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded

stone aggregate 40 mm nominal size derived from natural sources) Cum

19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded -

308 stone aggregate 40mm nominal size) up to haunches of S.W/RCC pipes including bed -

concrete as per standard design.

19.16 Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as

per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross

section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm

with minimum 112 mm space between protruded legs having 2 mm tread on top surface

by ribbing or chequering besides necessary and adequate anchoring projections on tail

312 length on 138 mm as per standard drawing and suitable to with stand the bend test and 5 553.70 2,769 -

chemical resistance test as per specifications and having manufacture's permanent

identification mark to be visible even after fixing, including fixing in manholes with

30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size) complete as per design.

19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed -

313 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) -

including testing of joints etc. complete :

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand)

with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded

stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4

318 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside -

plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with

floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :

2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating

coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) -

319 19.7.1 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 -

kg (weight of cover 23 kg and weight of frame 15 kg) :

320 19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1 12770.55 12,771 -

321 19.8 Extra for depth for manholes : - -

323 19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1 8825.40 8,825 -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

19.9 Constructing brick masonary circular type manhole 0.91m internal dia at bottom and -

0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) in side cement

plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a

325 floating coat of neat cement, foundation concrete 1 :3:6 mix (1 cement : 3 coarse sand -

: 6 graded 40mm nominal size), and making necessary channel in cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

finished with a floating coat of neat cement all complete as per standard design:

19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) -

560mm internal diameter confirming to I.S. 12592, total weight of cover and frame to

326 be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 -

graded stone aggregate 20 mm nominal size) including centering shuttering all

complete. (Excavation, foot rests and 12 mm thick cement plaster at the external

surface shall be paid for separately) :

327 19.9.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1 12725.00 12,725 -

19.10 Extra depth for circular type manhole 0.91m internal dia (at bottom) with beyond 0.91m -

329 19.10.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1 7591.80 7,592 -

19.11 Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia -

at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm

thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of

330 neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone -

aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4

(1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with

a floating coat of neat cement, all complete as per standard design :

19.11.1 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm -

internal diameter conforming to I.S. 12592, total weight of cover and frame to be not

331 less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded -

stone aggregate 20mm nominal size) including centering, shuttering all complete.

(Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be

paid for separately) :

332 19.11.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1 24702.75 24,703 -

19.12 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to -

334 19.12.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1 9861.45 9,861 -

19.27 Constructing bricks masonry road gully chamber 50x45x60 cm with bricks in cement -

335 mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal -

grating with frame complete as per standard design :

336 19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 2 5957.90 11,916 -

337 19.31 Extra for depth beyond 45 cm of brick masonry chamber - -

339 19.31.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1 6117.00 6,117 -

340 WIRING - -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS -

PVC insulated copper conductor single core cable in surface / recessed medium class

PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point

with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed medium class PVC conduit, 2 way modular switch,

modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC

insulated copper conductor single core cable etc as required.

Wiring for light/power plug with 2x4 Sq.mm FRLS PVC insulated, copper conductor,

344 1.12 single core cable in surface/recessed PVC conduit alongwith 1 No. 4 Sq.mm FRLS PVC Metre 150.00 334.00 50,100 -

insulated copper conductor single core cable for loop earthing as required.

Wiring for light/power plug with 4x4 Sq.mm FRLS PVC insulated, copper conductor,

345 1.13 single core cable in surface/recessed PVC conduit alongwith 2 Nos. 4 Sq.mm FRLS PVC Metre 50.00 537.00 26,850 -

insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS -

346 1.14 PVC insulated copper conductor, single core cable in surface/ recessed medium class -

PVC conduit as required

Supplying and fixing of following sizes of medium class PVC conduit along with -

352 1.21 accessories in surface/recess including cutting the wall and making good the same in -

case of recessed conduit as required.

Supplying and fixing stepped type electronic fan regulator on the existing modular plate

switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box

excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover

plate for modular switches in recess etc as required.

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Supplying and fixing suitable size GI box with modular plate and cover in front on

361 1.32 surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular Each 26.00 586.00 15,236 -

socket outlet and 15/16 amps modular switch, connection etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact

fluorescent fitting of all types, complete with all accessories and tube etc. directly on

ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper

conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of

standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor,

single core cable, including providing and fixing phenolic laminated sheet cover on the

fan box etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, -

connection, testing, commissioning etc. as required.

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole

and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet

steel enclosure, on surface or in recess, with chained metal cover for the socket out let

and complete with connections, testing and commissioning etc. as required.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete

with G.I. fittings including trenching (75 cm deep)and re-filling etc. as required

369 MCCB, MCB & DB's - -

Supplying and fixing following way, single pole and neutral, sheet steel ,MCB distribution -

board, 240 volts, on surface/ recess, complete with tinned copper busbar, neutral bus

bar, earth bar, din bar, interconnections powder painted including earthing etc. as

required. (But with out MCB/RCCB/ Isolator).

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel -

,MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper

372 2.4 busbar, neutral bus bar, earth bar, din bar, interconnections powder painted including -

earthing etc. as required. (But with out MCB/RCCB/ Isolator).

supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C Curve, miniature circuit -

374 2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete -

with connectoin testing and commissioning etc.as required.

supplying and fixing following rating,double pole,240 V,isolator in the existing MCB DB -

complete with connectoin testing and commissioning etc.as required.

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

supplying and fixing following rating,four pole,415 V,isolator in the existing MCB DB -

complete with connectoin testing and commissioning etc.as required.

supplying and fixing following rating,double pole,240 V,residual current circuit breaker -

380 2.14 (RCCB),having a sensitivity currrent 30 mA in the eiting MCB DB completed with -

connection ,teting commisoining etc.as required.

382 EARTHING - -

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and

383 5.2 providing masonry enclosure with cover plate having locking arrangement and watering Each 2.00 6855.00 13,710 -

pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth

electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as

required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring

washer spaced at 50mm)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along

with existing surface/ recessed conduit/ submain wiring/ cable as required. Meter

386 FITTING & FIXTURES - -

Supply of 1750-2200 LUMEN, 2700-3300 K LED Batten Light fixture Surface mounted (

387 NS similar specification of other approved makes) (Efficient lighting desing with led Each 40.00 874.00 - 34,960

light with efficacy of 100 lumen/watt.)

Supply of 800-1000 LUMEN,3600-4400 K, LED Light fixture (similar specification of other

388 NS approved makes) (Efficient lighting desing with led light with efficacy of 100 Each 8.00 458.00 - 3,664

389 b. Supplying of 1200mm sweep ceiling fan ( BEE 5 star rated) of approved make. Each 12.00 3500.00 - 42,000

Supplying of approved make Exaust Fan of the following size and its all accessories

suitable for operation on 230V single phase, 50 Hz, AC supply complete as required.

392 SOLAR Lighting System - -

Roof mounted Grid Connecting solar system having transformer less inverter, Peak

efficiency > 98%, connect upto multiple sting PV arrays, easy and fast connections, built

in string level monitoring and having IP-65 protection level with all fixing accessories &

NS mounting structure.

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Bill of Quantities

Type-III-06 Residential Quarter (G +2)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

2.6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means

over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan)

2 including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth

to be levelled and neatly dressed.

4 2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia meter 10.00 352.15 3,522 -

2.10.1.3 Pipes, cables etc. exceeding 300 mm dia but not

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by

6 2.25 ramming and watering, lead up to 50 m and lift up to 1.5 m. cum 20.00 196.00 3,920 -

2.27 Supplying and filling in plinth with Jamuna sand / river under floors including watering,

7 ramming consolidating and dressing complete. Cum 5.00 2123.75 10,619 -

8 2.34 Supplying chemical emulsion in sealed containers including delivery as specified. - -

9 2.34.1 Chlorpyriphos/Lindane Emulsifiable concentrate of 20%. Litre. 5.00 234.75 1,174 -

Along the external wall below concrete or masonry apron using chemical emulsion @

2.25 litres per linear metre including drilling and plugging holes etc.:

11 2.35.2.1 With Chlorpyriphos /Lindane E C. 20% with 1% concentration. metre 40.00 53.45 2,138 -

treatment under floor using chemical emulsion (excluding the cost of chemical

Treatment of soil once the excavation is over the entire carpet area shall be chemically

13 treated by making 12 mm dia holes at 150 c/c and 50-75 mm deep and applying Sqm 90.00 170.00 - 15,300

insecticide emulsion under pressure @5l/sqm of the horizontal surface area (as per IS

14 CONCRETE WORK - -

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of

15 cantering and shuttering - All work up to plinth level - -

4.1.10 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

4.10 Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1

17 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size). Sqm 20.70 410.85 8,505 -

4.12 Extra for providing and mixing water proofing material in cement concrete work in doses Per 50

18 by weight of cement as per manufacturer’s specification kg 40.00 18.15 726 -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand

: 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick

ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand

including finishing the top smooth

20 Formwork - -

5.9 Centring and shuttering including strutting, propping etc. and removal of form for:

22 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. sqm 137.36 392.15 53,866 -

23 5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 434.00 927.25 4,02,427 -

24 5.9.5 Lintels, beams, plinth beams, girders, bressummers and cantilevers. Sqm 39.75 736.40 29,272 -

25 5.9.6 Columns, Pillars, Piers, Abutments, posts and Struts Sqm 396.00 961.30 3,80,675 -

5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete up to plinth level

27 5.22.6 Thermo-Mechanically Treated bars kg 2637.00 107.85 2,84,400 -

5.22 A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

29 5.22A.6 Thermo-Mechanically Treated bars kg 14851.19 107.85 16,01,701 -

5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C.

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement

concrete work, using cement content as per approved design mix, manufactured in fully

automatic batching plant and transported to site of work in transit mixer for all leads,

having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site

31 5.33 of laying , excluding the cost of cantering, shuttering finishing and reinforcement, - -

including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength and durability

as per direction of the Engineer - in - charge.

(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement

used as per design mix is payable/recoverable separately).

32 5.33.1 All works up to plinth level. cum 26.37 9333.95 2,46,136 -

33 5.33.2 All works above plinth level up to floor V level. cum 74.26 9689.60 7,19,510 -

34 BRICK WORK - -

6.1 Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5

in foundation & plinth in:

36 6.1.2 Cement mortar 1:6 (1 cement: 6 coarse sand) cum 6.90 7132.25 49,213 -

6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

37 in superstructure above plinth level up to floor V level in all shapes and sizes in : - -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

38 6.4.2 Cement mortar 1: 6(1 cement: 6 coarse sand) cum 78.36 9105.95 7,13,582 -

6.5 Extra for brick work /AAC block masonry / Tile brick masonry in Extra for brick work I

AAC block masonry / Tile brick masonry in

superstructure above floor V level, for each four floors or part thereof by

mechanical means.

6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement: 4 coarse sand)

6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third

course of half brick masonry.

Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S.

43 6.44 (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 metre 55.00 59.54 3,275 -

(1 cement : 4 fine sand).

Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry Providing and

laying Autoclaved Aerated concrete(AAC) blocks masonry

6.38 100 mm/ 125 mm thick with Grade-1 AAC blocks of density 551 to 650 cum 2 10195.45 20,391

kg/cum conforming to IS:2185 (Part 3) in super structure above plinth

level up to floor V level in cement mortar 1 :4 (1 cement: 4 coarse sand ).

44 MARBLE WORK - -

8.2 Providing and fixing 18mm thick gang saw cut mirror polished remoulded and

repolished) machine cut for kitchen platforms, vanity counters, window sills , facias and

similar locations of required size of approved shade, colour and texture laid over 20mm

45 thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white - -

cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high gloss finish etc. complete at all levels.

46 8.2.1 White marble - Raj Nagar plain /Udaipur green marble /zebra black marble - -

47 8.2.1.2 Area of slab over 0.50 Sqm Sqm 5938.00 - -

48 8.2.2 Granite of any colour and shade - -

8.3 Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including

50 machine polishing to edge to give high gloss finish etc. complete as per design approved - -

by Engineer-in-Charge.

51 8.3.1 Marble work. metre 298.60 - -

8.4 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia

53 and drops of width up to 150 mm with epoxy resin based adhesive, including cleaning metre 15.00 568.55 8,528 -

8.5 Extra for providing opening of required size & shape for wash basins / kitchen sink in

kitchen platform, vanity counters and similar location in marble / Granite / stone work

including necessary holes for pillar taps etc. Including rubbing and polishing necessary

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

55 WOOD WORK - -

9.21 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I)

non-decorative type, core of block board construction with frame of 1st class hard wood

and well matched commercial 3 ply veneering with vertical grains or cross bands and

face veneers on both faces of shutters :

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on

58 9.23 all edges of flush door shutters (over all area of door shutter to be measured). sqm 53.28 462.35 24,634 -

9.26 Extra for cutting rebate in flush door shutters (Total area of the shutter to be

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in

gloss / matt / suede finish with high density protective surface layer and reverse side of

adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of

approved quality.

9.62 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws

etc. complete :

9.76 Providing & fixing bright finished brass 100mm mortice latch and lock with 6 levers and

64 a pair of lever handles with necessary screws etc. complete (Best make of approved Each 10.00 854.65 8,547 -

9.83 Providing & fixing IS:3564 marked aluminium Die cast body tubular type universal

65 hydraulic door closer with necessary accessories and screws etc. complete Each 10.00 1124.85 11,249 -

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board

or graded wood particle board IS : 3087 marked, with one side decorative and other

66 9.18 side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves - -

with screws and fittings wherever required, edges to be painted with polyurethane

primer (fittings to be paid separately).

9.91 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with

9.92 Providing and fixing chromium plated brass handles with necessary screws etc.

9.79 Providing & fixing special quality bright finished brass Cupboard or ward robe locks with

71 four levers including necessary screws etc. complete (best make of approved quality). - -

9.114 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe

shutters, including fixing with necessary screws etc. complete.

74 9.114.1 Triple strip vertical type Each - -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

75 9.114.2 Double strip (horizontal type) Each 10.00 39.70 397 -

9.47 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :

77 9.47.1 20 mm Dia (heavy type) metre 1.00 175.00 175 -

9.96 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating

78 not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or - -

shade with nuts and screws etc. complete:

9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less

80 than grade AC 10 as per IS : 1868 ) transparent or dyed toreqired colour or shade with - -

necessary screws etc.

9.100 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less

82 than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with - -

necessary screws etc. complete :

9.101 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic

coating not less than grade AC 10 as per IS :1868) transparent or dyed to required

colour or shade with necessary screws etc. complete:

85 9.101.2 Twin rubber stopper Each 22.00 72.25 1,590 -

9.135 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and

86 clerestory windows using wire gauge with average width of aperture 1.4 mm in both - -

directions with wire of dia. 0.50 mm all complete.

87 9.135.2 With 12 mm mild steel U beading sqm 52.47 1228.00 64,433 -

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall

thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners

and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the

88 9.119 vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 metre 60.60 492.70 29,858 -

gauge, EPDM rubber gasket weather seal to be provided through out the frame. The

door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as

per manufacturer’s specification and direction of Engineer-in-Charge.

Providing and fixing factory made panel PVC door shutter consisting of frame made

out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and

15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of

approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded

PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat

and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm

thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be

tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide

PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to

form lock rail.

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 )

thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail,

paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/

sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet

90 beading on inner side, and joined together with solvent cement adhesive. An additional - -

5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’

Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-

charge, manufacturer’s specification & drawing.

91 9.120.2 30 mm thick pre laminated PVC door shutters sqm 18.90 3663.80 69,246 -

92 STEEL WORK - -

10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed

93 work, including cutting, hoisting, fixing in position and applying a priming coat of Kg. 1075.68 113.70 1,22,305 -

approved steel primer all complete:

10.14 Providing and fixing pressed steel door frames conforming to IS: 4351,

manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges,

jamb, lock jamb, bead and if required angle threshold of mild steel angle of section

50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together

by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar

guards, lock strike plate and shock absorbers as specified and applying a coat of

approved steel primer after pre-treatment of the surface as directed by Engineer-in-

96 10.14.3.1 Fixing with adjustable lugs with split end tail to each jamb metre 139.80 640.20 89,500 -

10.15 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard

with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred,

97 welded and grinded finish, with profiles of required size, including fixing of necessary - -

butt hinges and screws and applying a priming coat of approved steel primer.

10.15.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm

98 of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal Kg 314.82 195.20 61,453 -

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan

clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its

top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S.

99 10.18 sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp Each 20.00 220.65 4,413 -

shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature

(wherever required) and fitting the same with necessary stainless steel nuts and bolts

100 10.28 complete, i/c fixing the railing with necessary accessories & stainless steel dash Kg 126.00 772.40 97,322 -

fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side

of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for

payment purpose only weight of stainless steel members shall be considered excluding

101 ROOFING - -

Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm Painting top

of roofs with bitumen of approved quality @ 17kg per 10 sqm

impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including

cleaning the slab surface with brushes and finally with a piece of cloth

lightly soaked in kerosene oil complete :

103 12.15.1 With residual type petroleum bitumen of grade VG -10 sqm 150.00 166.20 24,930 -

Providing corrugated G.S. sheet roofing including vertical/ curved surface Providing

corrugated G.S. sheet roofing including vertical/ curved surface

fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter

with bitumen and G.I. limpet washers or with G.I. limpet washers filled

104 with white lead, including a coat of approved steel primer and two coats sqm 180.00 1457.15 2,62,287 -

of approved paint on overlapping of sheets complete (up to any pitch

in horizontal/ vertical or curved surfaces), excluding the cost of purlins,

rafters and trusses and including cutting to size and shape wherever

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

105 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 - -

cement : 3 fine sand) as per standard design :

107 FLOORING - -

Marble stone flooring with 18mm thick marble stone as per sample of marble approved

by Engineer-in-charge over 20 mm (average) thick base of cement mortar 1:4 (1

cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and

polishing complete with :

109 11.23.2 Raj Nagar plain Sqm - -

110 11.24 Extra for pre finished nosing to treads of steps of marble/granite stone. metre - -

Extra for marble/granite stone flooring in treads of steps and risers using single length

up to 2.00 metre.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey

112 11.26 cement slurry mixed with pigment to match the shade of the slab, including rubbing and - -

polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Kota stone slabs 20 mm thick in risers of steps, skirting,dado and pillars laid on 12 mm

(average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey

cement slurry mixed with pigment to match the shade of the slabs, including rubbing

and polishing complete.

Providing & laying rectified glazed ceramics floor tiles 300x300mm or more

(thickness to be specified by the manufacturer) of Ist quality conforming to IS:15622 of

115 11.39 approved make in colours White, Ivory, Grey, Fume, Red Brown, laid on 20 mm thick sqm 85.75 1330.00 1,14,050 -

cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white

cement and matching pigments etc. complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS: 15622, of approved brand & manufacturer, in all colours

and shade, laid on 20 mm thick cement mortar 1 :4 (1 cement: 4 coarse

116 11.41 sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the - -

joints with white cement and matching pigments etc. The tiles must be cut

with the zero chipping diamond cutter only . Laying of tiles will be done

with the notch trowel, plier, wedge, clips of required thickness, leveling

system and rubber mallet for placing the tiles gently and easily.

117 11.41A.1 Double charge vitrified tile polished finish of size - -

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622

(thickness to be specified by the manufacturer ) of approved make in all colours, shades

except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in

skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1

cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including

pointing in white cement mixed with pigment of matching shade complete

120 FINISHING - -

121 13.4 12 mm cement plaster of mix : - -

123 13.16 6 mm cement plaster to ceiling of mix : - -

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1

125 13.11 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 Sqm 245.00 518.55 1,27,045 -

cement : 6 fine sand).

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to

prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to

127 13.41 give an even shade : - -

New work (two or more coats) over and including water tinnable priming coat with

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of

129 required shade : - -

New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming

coat of exterior primer applied @ 2.20 kg/ 10 sqm)

13.62 Painting with synthetic enamel paint of approved brand and manufacture of required

colour to give an even shade :

13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary

paint of approved brand and manufacture

133 13.68 French spirit polishing : - -

134 13.68.1 Two or more coats on new works including a coat of wood filler sqm 90.00 446.25 40,163 -

135 WATER PROOFING - -

Providing and laying water proofing treatment in sunken portion of WCs, bathrooms

etc. by applying cement slurry mixed with water proofing cement comopund consisting

of applying: a) First layer of slurry of cement @ 0.488 kg./Sqm mixed with water

proofing cement comound @ 0.253 kg./Sqm. This layer will be allowed to air cure for 4

136 22.5 hours. b) Second layer of slurry of cement @ 0.242 kg./Sqm mixed with water proofing Sqm 45.00 617.05 27,767 -

cement comopund @ 0.126 kg./Sqm. This layer will be allowed to air cure for 4 hours

followed with water curing for 48 hours. The rate includes preparation of surface,

treatment and sealing of all joints, corners, junctions of pipes and masonary with

polymer mixed slurry.

137 ALUMINIUM WORK - -

Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of

required dia and size, including necessary filling up the gaps at junctions, i.e. at top,

138 21.1 bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections - -

shall be smooth, rust free, straight, mitred and jointed mechanically wherever required

including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass /

stainless steel screws, all complete as per architectural drawings and the directions of

Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

139 21.1.1 For fixed portion - -

140 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 113.58 530.90 60,300 -

21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots

and making provision for fixing of fittings wherever required including the cost of EPDM

rubber / neoprene gasket required (Fittings shall be paid for separately)

142 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 52.47 634.45 33,290 -

Providing and fixing glazing in aluminium door, window, ventilator shutters and

partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the

architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap

beading shall be paid in basic item):

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

144 21.3.2 With float glass panes of 5.0 mm thickness(wt not less then 12.5 kg/sqm) sqm 41.98 1505.25 63,184 -

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by

providing weather silicon sealant over backer rod of approved quality as per architectural

145 21.8 drawings and direction of Engineer-in-charge complete. - -

146 21.8.1 Upto 5mm depth and 5 mm width Metre 80.00 96.75 7,740 -

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener

of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk

head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in

frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.

149 SANITARY FIXTURE - -

Note:-1. All Sanitarty fixture shal be low flow as mentioned below , where

150 flow/ flush rate of fixture shall be equivalent or lesser at 3 bar pressure( - -

2. water closet flushing cistern (dual flush 3/6) urinals 2 lpm faucets

151 (lavatory ,pantry,health) 6 lpm. - -

3.multiple sprinkler system native trees & vegetation shall be used.

4.over flow rain water storage & reuse on site of at least 75% of total

153 building water demand of 2 days shall be provide . - -

5. Desalting & grease trap system along with the proper flitation for rain

154 water recharging shall be provided. - -

Providing white vitreous china wall hung type European W.C. pan with white plastic

seat and lid with C.P. brass hinges & rubber buffers, 3/6 liters dual flush type white

155 NS vitreous china low level flushing cistern fixed directly on W.C. pan with fittings and Each 6.00 9500.00 - 57,000

brackets complete.

17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32

157 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, - -

cutting and making good the walls wherever require :

17.7.2 White Vitreous China Wash basin size 630x450 mm with a

single 15 mm C.P. brass pillar tap

17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983

with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and

159 brackets, cutting and making good the walls wherever required : - -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

160 17.10.1 Kitchen sink with drain board - -

17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as

per the direction of Engineer-in-charge.

17.28 Providing & fixing PVC waste pipe for sink or wash basin including PVC waste fittings

163 complete - -

164 17.28.1 Semi rigid pipe - -

Providing and fixing 15mm C.P brass Sink Mixer for kitchen sink with swinging spout Each

166 NS complete. Including cutting and making good the walls wherever required . 6.00 4343.00 - 26,058

167 NS Providing and Fixing of C.P. Brass Shower set comprising of : - -

168 One No. CP brass Single Lever Concealed Diverter . - -

169 One No. CP brass OH shower head & Shower Arm . - -

170 One No. CP brass Bath Spout. - -

171 Including cutting and making good the walls wherever required. - -

172 Shower set as described above. Each 12.00 11298.46 - 1,35,582

17.31 Providing and fixing 600 x 450mm bevelled edge mirror of superior glass (of

173 approved quality) complete with 6mm thick hard board ground fixed to wooden cleats Each 12.00 1607.95 19,295 -

with CP brass screws and washers complete.

174 17.34 Providing and fixing toilet paper holder : - -

17.73 Providing and fixing PTMT towel rail complete with brackets fixed to

176 wooden cleats with CP brass screws with concealed fittings arrangement of approved - -

quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height

of 88 mm, weighing not less than 190 gms

Providing and fixing health faucet with 1 m long flexible tube and wall hook including all

fittings approved quality.

179 18.49 Providing & fixing CP brass bib cock of approved quality conforming IS 8931: - -

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

standards and weighing not less than 690 gms.

Providing and fixing CP brass angle valve for basin mixer and geyser points of approved

quality confirming IS: 8931:

185 WATER SUPPLY - -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings, including

186 18.7 fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings - -

with one step CPVC solvent cement and testing of joints complete as per direction of

Engineer in Charge.

187 Internal work - Exposed on wall - -

188 18.7.1 15 mm nominal outer dia Pipes Metre 1.00 286.80 287 -

189 18.7.2 20 mm nominal outer dia Pipes Metre 50.00 335.00 16,750 -

190 18.7.3 25 mm nominal outer dia Pipes Metre 90.00 401.55 36,140 -

191 18.7.4 32 mm nominal outer dia Pipes Metre 30.00 518.75 15,563 -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing

the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with

one step CPVC solvent cement and the cost of cutting chases and making good the

same including testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

194 18.8.1 15 mm nominal outer dia Pipes Metre 1.00 497.80 498 -

195 18.8.2 20 mm nominal outer dia Pipes Metre 130.00 537.60 69,888 -

196 18.8.3 25 mm nominal outer dia Pipes Metre 1.00 627.25 627 -

197 18.8.4 32 mm nominal outer dia Pipes Metre 1.00 739.30 739 -

Providing and placing on terrace (at all floor levels) polythene water storage tank of

approved brand and manufacture with cover and suitable locking arrangement and

198 18.48 making necessary holes for inlet , outlet and overflow pipes but without fittings and the Litre 3000.00 11.00 33,000 -

base support for tank.

Providing and fixing forged brass ball valve of brass body with hard chrome plated steel

199 ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP - -

threads complete in all respects.

200 NS 20 mm nominal bore Each 10.00 587.23 - 5,872

201 NS 25 mm nominal bore Each 30.00 930.58 - 27,917

202 NS 32 mm nominal bore Each 5.00 1554.00 - 7,770

203 INTERNAL DRAINAGE - -

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm

diameter and weighing not less than 440 grams.

Providing and fixing Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS:

3989 soil, waste and vent pipes .

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

208 17.4 Providing and fixing bend of required degree with access door, insertion rubber washer - -

3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS - 3989.

Providing and fixing plain bend of required degree Sand cast iron S&S as per IS - 3989.

213 DSR-17.40 Providing and fixing heel rest sanitary bend. - -

215 17.40.1.2 Sand cast iron S&S as per IS - 3989 Each 8.00 548.70 4,390 -

216 17.42 Providing and fixing double equal plain junction of required degree. - -

218 17.42.1.2 Sand cast iron S&S as per IS - 3989 Each 5.00 1075.05 5,375 -

Providing and fixing single equal plain junction of required degree with access door,

insertion rubber washer 3 mm thick, bolts and nuts complete.

221 17.43.1.2 Sand cast iron S&S as per IS - 3989 Each 12.00 925.70 11,108 -

222 17.44 Providing and fixing single equal plain junction of required degree. - -

224 17.44.1.2 Sand cast iron S&S as per IS - 3989 Each 10.00 811.90 8,119 -

226 17.44.2.2 Sand cast iron S&S as per IS - 3989 Each 10.00 561.20 5,612 -

227 17.48 Providing and fixing single unequal plain junction of required degree. - -

230 17.6 Providing and fixing terminal guard.Sand cast iron S&S as per IS - 3989. - -

233 17.57 Providing and fixing collar.Sand cast iron S&S as per IS - 3989. - -

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and

fittings of diameter :

Providing and fixing MS Stay clamps for sand cast iron/ centrifugally cast (spun) iron

pipes of diameter.

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Providing and fixing trap of self cleansing design with screwed down or hinged with or

243 17.60 without vent arm complete, including cost of cutting and making good the walls and - -

244 17.60.1 100 mm inlet and 100 mm outlet - -

Painting sand cast iron/ centrifugally cast (spun) soil, waste, vent pipes and fittings with

246 17.65 paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of - -

approved quality) for new work.

248 17.65.2 75 mm diameter pipe Metre 10.00 62.95 630 -

Providing and fixing uPVC agricultural pipes conforming to IS:4985 (6 kg/sqcm)

including all fittings, e.g. couplings, tees, bends, reducers and screwed adoptors

jointing with solvent cement joint as per manufacturers' recommendations. [for Rain

Providing and fixing of GI split pipe support clamps with EPDM rubber lining, Zinc plated

for support of vertical/hanging horizontal soil, waste, vent and rain water pipes,

253 embedded in walls with anchor fastner, including recommended size GI threaded rod of - -

required length etc. including cost of cutting holes and making good the walls complete

in all respects.

254 NS For 75 mm dia Pipe (Thickness of clamp 1.7 mm) Each 10.00 375.19 - 3,752

255 NS For 100 mm dia Pipe (Thickness of clamp 2.0 mm) Each 15.00 383.72 - 5,756

256 NS For 150 mm dia Pipe (Thickness of clamp 2.0 mm) Each 1.00 535.99 - 536

Providing and fixing cast brass floor clean out plug with suitable insert keys for opening,

male threaded joint with GI threaded socket drip seal to soil / waste pipe of CI pipe as

required complete as per drawing approved sample and direction of engineer in charge.

Providing and fixing in position 100x50 mm dia GI reducing elbow including fix to floor

with cement mortar.

Providing and fixing 100 mm dia. GI inlet fitting/ Extension Piece with 2 or 3 inlets of 32

260 NS to 50 mm dia, fixed to CI trap with Drip Seal joint and set in cement concrete as per Each 18.00 2022.15 - 36,399

drawing complete.

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of

cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of

joints etc. complete :

263 2.10.1 All kinds of soil - -

264 2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia Metre 5.00 352.15 1,761 -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

265 EXTERNAL SEWEGE SYSTEM - -

2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in

foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),

including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting

out the excavated soil and disposal of surplus excavated soil as directed, within a lead of

2.10 Excavating trenches of required width for pipes, cables, etc including excavation for

sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting

268 out the excavated soil, and then returning the soil as required, in layers not exceeding - -

20 cm in depth, including consolidating each deposited layer by ramming, watering, etc.

and disposing of surplus excavated soil as directed, within a lead of 50 m :

269 2.10.1 All kinds of soil. - -

270 2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 36.00 352.15 12,677 -

2.11 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth

271 exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for - -

depth upto 1.5 metre).

272 a. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 1.00 447.23 447 -

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

273 etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by 1.00 196.00 196 -

ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum

274 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / - -

275 banking excavated or stacked materials. - -

4.10 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

4.1.10 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded

stone aggregate 40 mm nominal size derived from natural sources) Cum

19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating

brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size

279 (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than - -

2.70 kg as per standard design:

281 19.4.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 2.00 2802.15 5,604 -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand)

with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded

stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4

282 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside - -

plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with

floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :

2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating

coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)

283 19.7.1 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 - -

kg (weight of cover 23 kg and weight of frame 15 kg) :

284 19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 2.00 12770.55 25,541 -

285 19.8 Extra for depth for manholes : - -

287 19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1.00 8825.40 8,825 -

19.16 Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as

per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross

section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm

with minimum 112 mm space between protruded legs having 2 mm tread on top surface

by ribbing or chequering besides necessary and adequate anchoring projections on tail

288 length on 138 mm as per standard drawing and suitable to with stand the bend test and Each 5.00 487.10 2,436 -

chemical resistance test as per specifications and having manufacture's permanent

identification mark to be visible even after fixing, including fixing in manholes with

30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size) complete as per design.

19.9 Constructing brick masonary circular type manhole 0.91m internal dia at bottom and

0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) in side cement

plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a

289 floating coat of neat cement, foundation concrete 1 :3:6 mix (1 cement : 3 coarse sand - -

: 6 graded 40mm nominal size), and making necessary channel in cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

finished with a floating coat of neat cement all complete as per standard design:

19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation)

560mm internal diameter confirming to I.S. 12592, total weight of cover and frame to

290 be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 - -

graded stone aggregate 20 mm nominal size) including centering shuttering all

complete. (Excavation, foot rests and 12 mm thick cement plaster at the external

surface shall be paid for separately) :

291 19.9.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 12725.00 12,725 -

19.10 Extra depth for circular type manhole 0.91m internal dia (at bottom) with beyond 0.91m

293 19.10.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1.00 7591.80 7,592 -

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Providing, laying and jointing HDPE Double Wall Coil (DWC) SN-8 Grade pipes

confirming to IS: 16098 including all fittings wherever required e.g., tees, bends of any

degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer

recommondation etc. including testing of joints etc. complete.

296 Storm Water Drainage System - -

2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in

foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),

297 including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting - -

out the excavated soil and disposal of surplus excavated soil as directed, within a lead of

2.10 Excavating trenches of required width for pipes, cables, etc including excavation for

sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting

299 out the excavated soil, and then returning the soil as required, in layers not exceeding - -

20 cm in depth, including consolidating each deposited layer by ramming, watering, etc.

and disposing of surplus excavated soil as directed, within a lead of 50 m :

300 2.10.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 10.00 352.15 3,522 -

301 2.10.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. Metre 6.00 549.75 3,299 -

2.11 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth

302 exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for - -

depth upto 1.5 metre).

303 a. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 10.00 447.23 4,472 -

304 b. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. Metre 6.00 698.18 4,189 -

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

305 etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by 10.00 196.00 1,960 -

ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum

306 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / - -

307 banking excavated or stacked materials. - -

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

4.1.10 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded

stone aggregate 40 mm nominal size derived from natural sources) Cum

19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded

311 stone aggregate 40mm nominal size) up to haunches of S.W/RCC pipes including bed - -

concrete as per standard design.

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

19.16 Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as

per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross

section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm

with minimum 112 mm space between protruded legs having 2 mm tread on top surface

by ribbing or chequering besides necessary and adequate anchoring projections on tail

315 length on 138 mm as per standard drawing and suitable to with stand the bend test and 5.00 553.70 2,769 -

chemical resistance test as per specifications and having manufacture's permanent

identification mark to be visible even after fixing, including fixing in manholes with

30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size) complete as per design.

19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed

316 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) - -

including testing of joints etc. complete :

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand)

with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded

stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4

321 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside - -

plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with

floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :

2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating

coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)

322 19.7.1 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 - -

kg (weight of cover 23 kg and weight of frame 15 kg) :

323 19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 12770.55 12,771 -

324 19.8 Extra for depth for manholes : - -

326 19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1.00 8825.40 8,825 -

19.9 Constructing brick masonary circular type manhole 0.91m internal dia at bottom and

0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) in side cement

plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a

328 floating coat of neat cement, foundation concrete 1 :3:6 mix (1 cement : 3 coarse sand - -

: 6 graded 40mm nominal size), and making necessary channel in cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

finished with a floating coat of neat cement all complete as per standard design:

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation)

560mm internal diameter confirming to I.S. 12592, total weight of cover and frame to

329 be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 - -

graded stone aggregate 20 mm nominal size) including centering shuttering all

complete. (Excavation, foot rests and 12 mm thick cement plaster at the external

surface shall be paid for separately) :

330 19.9.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 12725.00 12,725 -

19.10 Extra depth for circular type manhole 0.91m internal dia (at bottom) with beyond 0.91m

332 19.10.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1.00 7591.80 7,592 -

19.11 Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia

at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm

thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of

333 neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone - -

aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4

(1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with

a floating coat of neat cement, all complete as per standard design :

19.11.1 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm

internal diameter conforming to I.S. 12592, total weight of cover and frame to be not

334 less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded - -

stone aggregate 20mm nominal size) including centering, shuttering all complete.

(Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be

paid for separately) :

335 19.11.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 24702.75 24,703 -

19.12 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to

337 19.12.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1.00 9861.45 9,861 -

19.27 Constructing bricks masonry road gully chamber 50x45x60 cm with bricks in cement

338 mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal - -

grating with frame complete as per standard design :

339 19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 2.00 5957.90 11,916 -

340 19.31 Extra for depth beyond 45 cm of brick masonry chamber - -

342 19.31.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1.00 6117.00 6,117 -

343 WIRING - -

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable in surface / recessed medium class

PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point

with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Digitally signed by SHUBHAM

Construction of various buildings i.e Boys Girls Dormitory,Type-IV Residence quarter,Guest House,10 nos Type-III Residencial Quarters and 5 nos type -II Residencial Quarters under the

phase-B work at JNV Bhandara (Ms)

Rate (DSR- Amount (DSR-

NS Rate NS AMOUNT (In

Sr.No (DSR-2023) Description of Item Unit Total Qty 2023) 2023)

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed medium class PVC conduit, 2 way modular switch,

modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC

insulated copper conductor single core cable etc as required.

Wiring for light/power plug with 2x4 Sq.mm FRLS PVC insulated, copper conductor,

347 1.12 single core cable in surface/recessed PVC conduit alongwith 1 No. 4 Sq.mm FRLS PVC Metre 200.00 334.00 66,800 -

insulated copper conductor single core cable for loop earthing as required.

Wiring for light/power plug with 4x4 Sq.mm FRLS PVC insulated, copper conductor,

348 1.13 single core cable in surface/recessed PVC conduit alongwith 2 Nos. 4 Sq.mm FRLS PVC Metre 65.00 537.00 34,905 -

insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS

349 1.14 PVC insulated copper conductor, single core cable in surface/ recessed medium class - -

PVC conduit as required

Supplying and fixing of following sizes of medium class PVC conduit along with

355 1.21 accessories in surface/recess including cutting the wall and making good the same in - -

case of recessed conduit as required.

Supplying and fixing stepped type electronic fan regulator on the existing modular plate

switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box

excluding modular plate as required.