Construction of Multipurpose Hall, at - turade at V.P. Turade

Item No.1: Excavation for foundation in earth soil of all types sand & gravel & soft murrum including removing the excavated material upto a distance of 50 m beyond the building area and lift as specified stacking & spreading necessary dewatering unless provided elsewere prepairing the bed for the foundation & required backfilling ramming, watering, storing & strutting etc. complete as directed

Item No 2 - Providing soling using 80mm size trap metal in layers of 15 cm each including filling voids with sand, ramming, watering etc. complete.

Item No 3: - Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.

Item No. 4:- Providing and casting in situ cement concrete M-20 of trap metal for R.C.C. Beams and Lintels as per detailed drawings and designs or as directed, including centering formwork, compacting, roughening the surface if special finish is to be provided and curing. (Excluding steel reinforcement.)

Item No 5: - Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Item No 6 - Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Item No.7 :- Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete.

Item No.8:- Providing Second class Burnt Brick masonary with conventional/IS type bricks in CM 1:6 in superstructure including striking joints rackingout joints watering and scaffolding etc complete

Item No.9:- Providing internal cement plaster 12 mm thick in a single coat, in cement mortar 1 : 3 without neeru finish to concrete or brick suface in all positions including racking out joints, scaffolding and curing complete.

Item No.10:- Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete