RENOVATION AND MODIFICATION OF PIG STY NO.4, 5, AND 6(SOW SHED), CONSTRUCTION OF DRESS CHANGING ROOM AND CONSTRUCTION OF BIO-SECURITY CHAIN LINK FENCING AT NUCLEUS PIG BREEDING FARM, KATHIATOLI IN NAGAON DIST

10.14 Providing and fixing pressed steel door frames conforming to IS:4351, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges, jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm , or base ties of 1.60mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5mm thick with mortar guards lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. 10.14.1 : Profile B 10.14.1.1 : Fixing with adjustable lugs with split end tail to each jamb

5.9 Centering and shuttering including strutting, propping etc. and removal of form for 5.9.5 : Lintels, beams, plinth beams, girders, bressumers and cantilevers

6.13 Half brick masonary with common burnt clay F.P.S. (non modular) brick of class designation 7.5 in super structure above plinth level upto floor V level. 6.13.2 : 2 cement mortar 1:4

4.10 Providing and laying damp proof course with cement concrete in prop. 1:2:4 (1 cement : 2 coarse sand (Zone – II) derived from natural source : 4 graded stone aggregate 12.5 mm nominal size derived from natural sources)

16.70 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50 x 50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as required complete as per the direction of Engineer-in-charge. 16.70.1 : Made of G.I. wire of dia 4mm

10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 : In gratings, frames, guard bar, lader, railings, brackets, gates and similar works

4.1. Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All works upto plinth level 4.1.3 : 1:2:4 (1 cement : 2 coarse sand (zone – III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources)

13.2 15mm cement plaster on the rough side of single or half brick wall of mix 13.2.1 : 1:4 (1 cement : 4 fine sand)

11.6 Cement plaster skirting upto 30cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 11.6.1 : 18mm thick

12.45 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6 mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre, one flages fixed to the ceiling with dashfastener 12.5mm dia x 50mm long with 6mm dia bolts .......12.45.1 : 12.5mm thick tapered edge gypsum plain board conforming to IS:2095 (Part-I) : 2011 (Board with BIS certification marks)