Renovation and Modernization of various Receiving Stations of STD Ganderbal Renovation and Modernization of Ajas, Nadihal and Ajar Receiving stations Bandipora. PDDSS2022100379

Amount

Renovation and Modernization of Ajas, Nadihal and Ajar Receiving stations Bandipora)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Demolishing of existing plaster wall putty, wood work, brick work including disposal upto lead of 100 m and stacking of disposable material.as per satisfaction of engineer in charge

Providing and laying vitrified floor tiles/Stair steps Columns etc. in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm

Reinforcement for RCC work incld. straightening, cutting, bending, placing in positions and binding all complete (T.M.T).

Centering & shuttering incld. strutting, propping etc. & removal of form for: walls( of any thickness), plinths and butresses-

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position:-First class kail wood.

Providing and fixing of glazed shutters for doors, windows and clerestory windows using 10 kg/Sqm (4 mm thick) glass panes including black enameled ISI marked M.S butt hinges with necessary screws. 40mm thick (Ist class Kail Wood)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.including ISI marked black enameled M.S.Butt hinges with necessary screws including cost of paneling 25mm to 40 mm thick :-Ist class kail wood.

P/F 40 mm thick wire gauze shutters using glavansoned M.S. wire gauze of average width for aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or/ and black enameled M.S.Butt hinges with necessary screws:- First class kail wood.

P/F of Ceramic glazed floor tiles (thickness to be specified by the manufactures) of Ist quality conforming of IS:13755 of NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in colour such as White, Ivory, Gray, Fume Red brown laid on 20 mm thick bed of cement Mortor 1:4 (1 cemnt:4 coarse sand) including pointing the joints with White cement and matching pigment etc complete.

12 mm thick cement on the rough side of single or half brick wall of mix:1:6 (1: cement :6 fine sand)

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complet

Cement conc. flooring 1:2:4 mix finished with a floating coat of neat cement incld. cement slurry, but excl. the cost of noising of steps etc. complete, 50 mm thick with 20 mm nominal size, stone agg. (Crushed)

Wall Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. with one coat of primer and Two or more coats of paint on new work and on wood work

Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing water closet indian type including cistern, P or S trap including cutting and making good the wall and floor, white colour (viterous ,cera , etc) orrisa pattern with integral foot rests

Providing and fixing wash basin with C.I/M.S brackets 15mm C.P brass pillar taps 32mm C.P brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls where ever required. White Vitreous China Wash Basin size 630mmx450mm with a pair of C.P brass pillar taps

Providing and fixing approved colour viterous china pedestal for wash basin cpmpletely recessed at the back for the reception of pipes and fittings.

Providing and fixing stainless steel grating on waste water pipe fitted on suitable frame including all carriages upto site of work complete job.

Providing and fixing PVC waste pipes flexible type for sink and washbasin including PVC fittings complete flexible

Providing and fixing PVC flexible type soil waste and vent pipes for disposal system from bath & kitchen upto Septic tank & Soakage pit with all accessories like bends tees, collars door bends manhole covers etc.complete Job

Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc. This includes testing of joints complete as per direction of the Engineer-in-charge:Internal work concealed with clamps at 1.00 meter spacing including cutting the chases and making good the wall etc. 32 mm dia

Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilizedwith carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc. This includes testing of joints complete as per direction of the Engineer-in-charge External work including trenching and refilling etc. complete ...25mm dia

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040mm bowl depth 250mm

Providing and fixing pipe specials 15mm dia reputed make (RESP, Jaquar, Parco, NIKE,etc ) ISI mark including all carriages upto site of work complete job.

CP bib cock

CP bib cock long nose

CP angle valve

Sink Mixer

gate/ball /stop valve

Providing and fixing toilet paper holder CP brass

Providing and fixing towel rail CP brass

Providing and fixing soap case CP brass

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but with fittings

Providing and fixing water heater reputed make (venus, racold, etc) ISI mark including all necessary firrings including making good wall after installation all complete

Supply and fixing Structural steel work in single section fixed with connecting plate for chequered plates including cutting, hoisting, fixing in position and applying a priming coat of red oxide steel primer including carriage

Providing & Fixing Stainless Steel Fittings for doors & Windows comprising of handles,tower bolts,stays, hinges,aldrops with locks etc of reputed brand. complete job

Providing & Fixing of electric wiring of standard gauge in concealed HDPE conduits and fittings/heating/lighting points of standard make like Polycab/Philips/Havels /Bajaj/Legrand/ Anchor (Complete job in all respects) with 10 No lighting points, 5 No heating points,4 No exhaust Fan points,02 no ceiling fans ,20 No 5W bulbs, etc. and accesories as per directions of Engineer-In-Charge with cost of all materials

M/s Gh Mohammad Hakeem (BID ID -2651004)

IRSHAD AHMAD RATHER (BID ID -2650846)