Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹67 L
EMD Value
₹1.3 L
Closing Date
30 Apr 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Provisioning of Modular Kitchen for FD Type Quarters at Senior Officers Enclave HAL Bangalore
7009
TENDER NOTICE/NCP/50/23-24/02
Works
Contract Section Civil-FMD-Bangalore
₹0
₹1.3 L
30 Apr 2024
13 Apr 2024
13 Apr 2024
30 Apr 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Demolition of existing brick masonry built in cement mortar manually / by mechanically means including stacking serviceable materials within 50Mtrs. Lead, etc., all complete as directed by Engineer-in-Charge.
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable mterial and disposal of unserviceable material within 50metres lead, etc., all complete as directed by Engineer-in-Charge.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50metres lead for thickness of tiles 10mm to 25mm, etc., all complete as directed by Engineer-in-Charge.
Disposal of moorum / building rubbish / malba / similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10km for all lifts, etc., all complete as directed by Engineer-in-Charge. Note - Item to be applicable in urban areas having directions for restricted hours for movement / plying of load carrying motor vehicle of 3.50Cu m or more.
Dismantling 15 to 40mm dia GI pipe including stacking of dismantled pipes (within 50metres lead), etc., all complete as directed by Engineer-in-Charge.
Cement mortar (1:6) plastering 20mm thick for brick/concrete surfaces, finished smooth with trowel including lime rendering for interior faces of walls surfaces including scaffolding, curing, etc., all complete as directed by Engineer-in-Charge.
Providing and laying Glazed Vitrified tiles Matt/Antiskid finish of size Vitrified tiles in floor in 600x600mm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments, etc., The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per Sq m, including pointing in white cement mixed with pigment of matching shade, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing wooden cabinet of 60cm depth using 18mm thick plywood board (Water proof) with both the sides laminated with Colour sheets of glossy finish as approved by EIC (machine pressed) of approved manufacturer for vertical and horizontal shelves fixed with SS Baskets and front exposed face with coloured sheets including handles, hydraulic / soft touch hinges, necessary screws, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing wooden crockery unit of 20-30cm deep using 18mm thick plywood board with both the sides laminated with colour sheets of glossy finish as approved by EIC (Machine pressed) of approved manufacturer for vertical and horizontal shelves, front doors and exposed face laminated with coloured sheets and glazed with 5mm thick approved coloured glass including handles, Hydraulic / soft touch hinges, necessary screws, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing wooden crockery unit of 30cm deep using 18mm thick plywood board with both the sides laminated with colour sheets of glossy finish as approved by EIC (Machine pressed) of approved manufacturer for vertical and horizontal shelves, front doors and exposed face laminated with coloured sheets and glazed with 5mm thick approved coloured glass including handles, hydraulic / soft touch hinges, necessary screws, etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing following Stainless steel kitchen baskets of heavy gauge and 304 grade of approved manufacture with necessary screws, etc., all complete as directed by Engineer-in-Charge.
Cultlery basket (60x50x10)cm
Cup & Saucer (60x50x10)cm
Plain basket (60x50x20)cm
Thali basket (60x50x20)cm
Supplying and fixing 20mm thick polished jet black one side polished granite slab for wooden cabinet fixed over and with cement mortar (1:4) 20mm thick with exposed edges bull nozed for 40mm thick including providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, etc., all complete as directed by Engineer-in-Charge.
Supplying and fixing copper pipe for gas connection with 2 Nos. Valves and in let and out let knobs etc., including cutting the wall for pipe line and fixing the pipe, making holes, cementing, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls, etc., all complete as directed by Engineer-in-Charge.
25mm dia
20mm dia
Supplying and fixing stainless steel A ISI 304 (18/8) Kitchen sink without drain board of size (610x510mm) bowl depth 200mm, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing 15mm dia CP brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810gms, etc., all complete as directed by Engineer-in-Charge.
Distempering with 1st quality acrylic distemper (ready mixed) for old work one or more coats having VOC content less than 50gr/ltr of approved brand and manufacture including applying additional coats wherever required to achieve even shade and colour, etc., all complete as directed by Engineer-in-Charge.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work, etc., all complete as directed by Engineer-in-Charge.
Supplying, mixing and placing in position in suitable 1:2:4 Cement concrete for flooring (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), including finishing, etc., all complete as directed by Engineer-in-Charge.
Rupees Fifty Lakh Thirty Three Thousand Sixty Seven and Fifty Two Paise Only
Supply and fixing brasws battery/angle holder including connection etc., as required
Lighting Point wiring
Wiring to single light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.
Wiring to exhaust fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects.
Wiring-Lighting circuits/submain ckts
3 x 6 sq. mm +1X6sqmm earth wire
Wiring for Power Points(6A & 16A power sockets)
6A one-way flush type modular SP switch.
16A one-way flush type modular SP switch.
Distribution Board
6 Way Horizontal type SPN MCB DB
40A, DP MCB
10A SP MCB
Main Incomimg Switch
Removal of existing 6 Way SPN MCB DB as is basis including i/c and o/g MCBs and handing over the same to Electrical maintenance department
Rupees Six Lakh Forty Six Thousand Two Hundred Five and Eighty Five Paise Only
Rupees Fifty Six Lakh Seventy Nine Thousand Two Hundred Seventy Three and Thirty Seven Paise Only
Approximate Amount Put to Tender
BELOW
Rupees Ten Lakh Twenty Two Thousand Two Hundred Sixty Nine and Twenty Paise Only
Rupees Sixty Seven Lakh One Thousand Five Hundred Forty Two and Fifty Seven Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TNF50.pdf
TENDER_DOCUMENT • 2.63 MB
175UNDERTAKING.pdf
TENDER_DOCUMENT • 0.55 MB
175ECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
175PQ.xls
TENDER_DOCUMENT • 0.36 MB
175PB.xls
TENDER_DOCUMENT • 0.39 MB
175PQF.pdf
TENDER_DOCUMENT • 0.21 MB
175PBF.pdf
TENDER_DOCUMENT • 0.33 MB
175CHECKLIST.pdf
TENDER_DOCUMENT • 0.17 MB
175Amd.pdf
TENDER_DOCUMENT • 0.51 MB
175TB.pdf
TENDER_DOCUMENT • 3.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .