AUGMENTATION OF GSS MAGAM FROM 50 TO 100 MVA EXECUTION OF BALANCE CIVIL WORKS THEREOF

Amount

RENNOVATION /REPAIRS OF EXISTING CONTROL ROOM AND CONTROL DESK , QUARTERS ALONGWITH REQUIRED FURNITURE AT 132/33 KV GSS MAGAM

Providing and fixing of 12mm Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked for control des

Providing and fixing in wall lining of specified medium density board, pre-laminated oneside decorative lamination other side balancing lamination Grade I, exterior grade, with necessary fixing arrangement and screws etc. complete. 8.25.1 Flat pressed 3 layer particle board or graded wood particle board grade-I type-II,IS: 12823 marked including primer coat on unexposed surfaces

Providing and fixing 1mm decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type. including cost of adhesive of approved quality

Providing and fixing of drawer channels

Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete. 9.59.1 Overall width 35 mm

Providing and fixing bright finished tower bolts barrel type , with necessary screws etc. complete 100x10 mm

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete Double strip (horizontal type)

Providing & Fixing chromium plated brass handles 125 mm with necessary screws etc complete.

Providing & Fixing chromium plated brass handles 100 mm with necessary screws etc complete.

Providing and fixing special quality bright finished brasscupboard of ward robe locks 50mm with four levers including necessary screws etc. complete

Supply ,installiation ,testing and commissioning of digital amp meters on control desk including fixing of control cables from respective C& R panel up to control desk inside cabin of control room complete job ( cable to be provided by the department) input 1A /5 A ( Programmeable),50/60 Hz ,accuracy class 0.5 ,4 digit ,auxiallery supply 40-300Volts /Ac/ Dc(96mmx96mm).

Supply ,installiation ,testing and commissioning of digital Frequency meters on control desk including fixing of control cables from C& R panel up to control desk inside cabin of control room complete job ( cable to be provided by the department) input 10 /500Hz ( Programmeable),50-500 volts L-N,accuracy class 0.5 ,4 digit ,auxiallery supply 40-300Volts /Ac/ Dc ,3VA (96mmx96mm) accuracy ±0.5 Hz ,±1 digit (96mmX96mm).

Supply ,installiation ,testing and commissioning of digital Volt meters on control desk including fixing of control cables from respective C& R panel up to control desk inside cabin of control room complete job ( cable to be provided by the department) input 1A /5 A ( Programmeable),50/60 Hz ,accuracy class 0.5 ,4 digit ,auxiallery supply 40-300Volts /Ac/ Dc(96mmx96mm)

Supply ,installiation ,testing and commissioning of digital MW meters on control desk including fixing of control cables from respective C& R panel up to control desk inside cabin of control room complete job ( cable to be provided by the department) input 1A /5 A ( Programmeable),50/60 Hz ,accuracy class 0.5 ,4 digit ,auxiallery supply 40-300Volts /Ac/ Dc(96mmx96mm)

Supply ,installiation and commissioning of push buttons for 33kv& 132KV feeders including providing of wire etc.

Supply ,installiation and commissioning of LED 110v DC for 33kv& 132KV feeders including providing of wire etc.

Dismantling of existing wooden desk and reutilise the dismantalled material for other related repairing works

P/Fixing of brass Locks of standard quality for Wardrobe, dryers etc. for SBA quarter

P/F Al round shape handle of outer dia 100mm dia with ss screws etc completeas per directions of Engineer in charge(powder coated minimum thickness 50 microns)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, including panelling of 25mm thick Ist Class Kail wood and Glass Pans 4mm thick, all complete as per direction of Engineer-in-charge 35 mm thick First Class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (First Class Kail Wood)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. ( Decorative ply wood both side decorative veneer (type 1) conforming to IS 1328 BWR type )

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge 35mm Thick First class kail wood

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .Dark shade using ordinary cement.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work excluding windows & Doors ( Rooms & Gallery of site office and SBA Quarter)

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete Quantity 40% of painting for repairs

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 2.25 times on Windows,SBA quarter,Vents and wire Guaze shutters

Painitng of wood and wood based sufaces with two or more coats of symnthetic enamle paint

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content, With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ liter

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Electric resistance or induction butt welded tubes.( For SBA Quarter Gate)

Providing and fixing pipe specials 15mm dia reputed make (RESP, Jaquar, Parco, NIKE,etc ) ISI mark including all carriages upto site of work complete job

A) CP Bib Cock

B) CP Bib Cock Long Nose

C) CP angle Valve

D) Gate/ball/stop valve

E) Wall Mixer

F) Basin Mixer with Wash Basin.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank ( 2x 1000 ltr)

Providing and fixing water heater reputed make (venus, racold, etc) ISI mark including all necessary firrings including making good wall after installation all complete

A) 50 Ltr Capacity.

B) 25 Ltr Capacity.

Providing and fixing 10 liter low level PVC flushing cistern including flush pipe ( of approved make) manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.

Electric fitting. Complete job incl. providing of conduits, copper wire 4sqmm for main and 2.5sqmm for sub main heating points and 1.5sqmm for lighting points of reputed make like Poly cab,Havells,KEI, type) of reputed make. As per directions of Engineer-In-Charge

A) Lighting Points

B) Heating Points

C) Supply ,fixing and commissioning of 5A to 32 A MCB

Supply ,installation and commissiong of square surface slim LED 24 W light

Supply,Instalation & commissioning of Exhaust Fan of Standard quality.

Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factornot less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speedcontrol and allremaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase ACSupply, earthing etc. complete as required.

Providing & Fixing Stainless Steel Fittings for doors & Windows comprising of handles, toweL bolts,stays, hinges,aldrops with locks etc. complete job,etc.as per direction of Engineer-in-charge

A) Brass Handles (100mm)

B) Butt Hinges (75X45x3.2mm)

C) Bright finished tower bolts barrel type 100x10mm

D) 40mm cupboard Locks

Providing of Revolving type Chair for Control Cabin of superior quality as directed by Engineer Incharge.

Providing of two No. ( 02 No) Sofa Sets with central Table for each set of sofa of standard quality , material and make and 10 No Chairs of supeiror quality as per directions of Engineer-In -Charge

Providing of wooden bed of size 6 x 6 feet of superior quality as per directions of Engineer-In -Charge

DEVELOPMENT OF LAND BY WAY OF EARTH FILLING AT GRID STATION MAGAM

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete (landscaping) Total area = 12350 sft X 1' (average)+ 3100X2.5'(AVERAGE) = 20100 cft= 569.00 CuM

MOHD AKBER MIR (BID ID -2273630)

HBSA BUSHELS PRIVATE LIMITED (BID ID -2284176)