ADDN / ALTN TO PORCH AND GAURAGES, PROVN OF FLOOR TILES AND SPL REPAIRS TO EXTERNAL PLASTERING, ROOFING, CEILING AND OTHER CONNECTED B/R WORKS AT BUILDING NO-24 ROBERT ROAD UNDER GE(W) COLABA, MUMBAI.

Amount

Dismantling mangalore pattern or similar tiles in roofing including portions bedded in cement mortar all as specified and directed.

M&L roof tiles, mangalore pattern, interlocking at side joints, laid dry all as specified and directed.

Fixing only roof tiles, mangalore pattern, interlocking at side joints, laid dry all as specified and directed.

M&L ridge or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 all as specified and directed.

Dismantling of framed work of timber in scantlings 40 sq. cm and over in section, in any position all as specified and directed.

M&L in repairs to replace old decayed timber (including piecing, scarifying, etc of old and new timber if required) second class hard wood clean sawn in scantlings timber framed and fixed in any position and description including scafoldings of any height all as specified and directed.

M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

Dismantling battens for tiles, shingles. etc, of any size including tilting fillets not exc 15 cm all as specified and directed.

M&L second class hardwood clean sawn battens at 30cm centres sectional area exc 15 & n exc 25 Sqcm including scafoldings of any height all as specified and directed.

Fixing only second class hardwood clean sawn battens at 30cm centres sectional area exc 15 & n exc 25 Sqcm including scaffoldings of any height all as specified and directed.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application all as specified and directed.

S&F in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any height all as specified and directed.

Fixing only in repairs in patches including cutting out old, piecing, heading joints 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any height all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S&F joist,channel, angle, or tee sections, or MS Flats fixed independantly without connecting plates, etc. Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume / CGI chajjas all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary paint tint) (each coat) over a coat of pink primer including scafoldings of any height all as specified and directed.

M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary paint tint) (each coat) over a coat of pink primer including scafoldings of any height all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and directed. Make : Asian - Apcolite or Berger- Luxol)

Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slab/beams/columns etc. with power/hand driven chisel as directed by the engineer-in-charge upto 60 mm average depth including saw-cutting of all edges making square shoulders of the cavities including complete all as specified and as directed. Note:- a) All loose unsound and cracked concrete shall be removed out side MD land. b) Thickness shall be measured excluding plaster)

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height all as specified and as directed.

M&L for mild steel TMT bars of any dia in stirrups, spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed

M&L for removing plants including roots by dismantling of brickwork/PCC including necessary scaffolding of any type and in any position or location i.e roof , parapet walls near pipes etc and applying acid after removing roots for preventing the re-growth & making good of disturbed portion using PCC 1:2:4 type B0 & 10mm thick cement plaster in CM (1:3), size of disturbed portion not exc 150mm X150mm X 200mm all as specified and directed.

M&L for filling cracks by cutting 'V' groove cracks of internal or external plaster of walls, ceilings/Chajjas all along the crack upto 10 mm and remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat and for external application must be coated with paint including necessary scafolding of any hieght all as specifed and direcetd. Make : Use of Dr Fixit Crack 'X' shrinkfree paste compound/ Smartcare Texture Crack Filler / Build Core Compound / Fosroc Compound, as approved by GE

M&L plastering 20-25 mm thick (Avg) polymer modified cement mortar in two coats, 15 mm base coat and subsequent finishing coat with and including curing as per manufacturer's instruction complete all as specified and as directedby Engr-in-Charge. Make Dr fixit repair Pro-Polymer mortar, FOSROC- RENDOROC S2- structural grade polymer mortar or equivalent in STP

Providing and fixing special water tight centering and shuttering including bolting, strutting, propping etc. so as to withstand a pressure of 0.1 Mpa including removal of form from all locations including beams, columns, slabs, walls, foundations, footings, landings, stairs, balconies etc. complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water and removing debris outside MD land (from ground floor to fourth storeys bldgs) including use of scaffoldings all as specified and directed.

M&L 12-15 mm thick average plaster in two coats with ready mix prepacked proportioned dry mix mortar, blended with PP fibers, waterproofing additives, on external surfaces including transporting of material, mixing, curing, all as specified and directed. MAKE: M/s ACC Accoplast/ M/s Ultratech Readiplast/ M/s Magicrete Magicplast/ CK Birla's AEROCEN

Supply only liquid water proofing compound.

Providing & applying anti algal water-based Elastomeric exterior wall finish on old as well as newly plastered surfaces including surface preparation, applying suitable wall Prime seal primer 8-10 Sqm per ltr coverage area and application of two coats (base coat 4.2 -4.7 & top coat 6-6.5 sqm per ltr coverage area ) & of paint by roller all as specified and directed. Make- Dr Fixit Rain coat classic, Asian paints, Berger .

M&L for preparation of newly plastered surfaces of walls and applying two coats of Oil bound distimper, including one coat of alkali resistant primer over a coat of birla putty (avg 3 mm thick) all as specified and directed. Make :- Asian paint (Emulsion Sparc),Berger (Rangoli) or equivalent makes.

M&L for complete removal of existing treatment of wall and applying two coats of Oil bound distimper, including one coat of alkali resistant primer over a coat of birla putty (avg 3 mm thick) all as specified and directed. Make :- Asian paint (Emulsion Sparc),Berger (Rangoli) or equivalent makes.

S&F anodised aluminium section for doors, windows, ventilator door partition including fabrication of frame shutters and fixed with necessary lugs, cleats, rollers, handles, locking arrangement including all necessary accessories such as glazing clips, provn of AC opening and rubber beading for fixing glass beading for fixing glass panes in frame all as specified and directed. Note- (i) Glass panes will be measured and paid separetly. (ii) The quoted rate shall be inclusive of cost of rubber beading and glazing clip hinges, handle, however it will not be weighted and not paid separately. (iii) All other minor details including cost of locking arrangement, filling gap between wall and shutter ith silicon shall be included in the quoted rate. Make Hindalco/indl/Jindal or equivalent

M&L 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square area exc 0.5 sqm in each pane frosted on one side all as specified and directed.

M&L aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beadding all as specified and directed.

Providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment along external wall below concrete or masonary apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes in apron all as specified and directed.

Providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment for treatment of soil under existing floors using emulsion at the rate of one litre per hole, 300mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1cement : 2 coarse sand) to match the existing floor all as specified and directed.

Providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 litre per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same all as specified and directed.

S&F 18mm thick UV coating, HDHMR board exterior grade, including acrylic high gloss sheet of 3mm thick over HDHMR board, anti fungal, moisture resistence, anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards all as specified and directed. NOTE:- Sample as approved by GE . Make:-Action tessa/Greenply/ Century

S&F 18mm thick UV coating, MDF board exterior grade, Both side laminated with any colour anti fungal, moisture resistence, anti borer, as per IS 14587 for kitchen/Cupboards shelfs fixing with 1st class hard wood lipping/beading all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by GE . Make:-Action tessa/Greenply/ Century

S&F in repairs of Partial overlay / fully overlay hydraulic soft closing concealed hinges having size 103mm x 64mm finish of nickel/silver all as specified and directed by Engg-in-charge. Make : Godrej Kitchen appliances or other equivalent make as approved by GE.

S&F in repairs of stainless steel cabinet / drawers handle having a length of 250mm and shape all as specified and directed.

S&F in repairs of stainless steel modular thali-plate basket SS 304, size of 520x485x200mm, heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer soft closing channel having weighing capacity of 25 kg all as specified and directed. Make : Cat Part No-6168 of Godrej Kitchen appliances or other equivalent Make as approved by GE..

S&F in repairs of stainless steel modular perforated cutlery basket SS 304 size of 52 x 48.5 x 10 cm with heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer soft closing channel having weighing capacity of 25 kg all as specified and directed. Make : Cat Part No-6162 of Godrej Kitchen appliances or other equivalent make as approved by GE..

S&F in repairs of stainless steel glass tray plate tray having length of 610mm, corrosion resistance telescopic drawer soft closing channel complete all as specified and directed. Make : Cat Part No-5796 of Godrej Kitchen appliances or other equivalent make as approved by GE.

S&F in repairs of stainless steel triple cutlery inserts having length of 500mm with telescopic drawer soft closing channel having weighing capacity of 6 kg all as specified and directed. Make : Cat Part No-6408 of Godrej Kitchen appliances or other equivalent make as approved by GE.

S&F in repairs of stainless steel hanging spice rack having three shelf spaces length of 500mm all as specified and directed. Make : Cat Part No-4970 of Godrej Kitchen appliances or other equivalent make as approved by GE.

S&F in repairs of stainless steel grain trolley SS 304 having size of 525x485x350mm, with heavy duty and grade steel with finish of zinc, corrosion resistance soft closing telescopic drawer channel having weighing capacity of 25 kg all as specified and directed. Make : Cat Part No-6175 of Godrej Kitchen appliances or other equivalent make as approved by GE.

S&F in repairs of stainless steel slim Ergo single square rail 550mm anthracite finish with heavy duty and grade steelwith finish of zinc, corrosion resistance telescopic soft closing drawer channel having weighing capacity of 25 kg all as specified and directed. Make : Cat Part No-4340 of Godrej Kitchen appliances or other equivalent make as approved by GE.

S&F in repairs stainless steel glass tray plate with corrosion resistance telescopic drawer channel having length 610 mm all as specified and directed. Make cat part No P-5796 of Godrej kitchen. Appliances or other eqv

S&F stainless steel cabinet drawer multi lock single latch 40 mm size fixed all as specified and directed by Engr-In-charge (For built in cup boards). Make: Door set/sleek(Asian Paints) or equivalent as approved by GE.

S&F 50 mm magnet PVC coating MS cabinet drawer Magnet all as specified and directed by Engr-in-charge (For built in cup boards). Make: Door set/sleek(Asian Paints) or equivalent as approved by GE.

S&F MS with black coating 550 mm long with load capacity 40 Kg cabinet drawer channel fixing with screws all as specified and directed by Engr-in-charge (For built in cup boards). Make: Door set/sleek(Asian Paints) or equivalent as approved by GE.

S&F channel mounted Easy dry 4 pipes aluminium cloth drying pulley system 2.50m to 2.75m in length, with locking system all as specified & directed by Engg-In-Charge.

S&F in repairs stainless steel plate racks of size 31" x 24" x 10" (or nearest size) Make : Prayag/ Nirali/ Bluestar all as specified & directed.

M&L for complete removal of existing treatment of wall and applying two coats of Oil bound distimper including one coat of alkali resistant primer over a coat of birla putty (avg 3 mm thick) all as specified and directed. Make :- Asian paint (Emulsion Sparc),Berger (Rangoli) or equivalent makes.

M&L for French polishing with two or more coats on new / old surfaces of any description, width or girth after cleaning, fine sanded and making free from any wax and grease, removing it completely (with Paint & Varnish Remover if required ) and preparing the surface by filling of open grained with a coat of wood filler and making it smooth mirror like surface using alcohol based shellac finish all as specified and directed.

S&F decorative and suitable pattern and size of solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as specified and directed.

M&L for anodised aluminium frame, frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing all as specified and directed.

S&F in repairs 20 mm dia decorative fancy type SS curtain rods and all other connected works all as specified and directed.

S&F in repairs 20 mm dia decorative fancy type SS curtain rod brackets all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons laid, bedded and pointed in any mortar and removal of rubbish off the siteoutside MD land all as specified and directed.

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced all as specified and directed.

M&L plain Cement concrete type B-2, 1:2:4 (using 40mm graded crushed stone aggregate) as in flooring and other similar works all as specified & directed

M&L Granite (of any type and colour) 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid in floors/Jambs/WHB conters and all other similar works in approved design over 20 mm thick screed bed in cement mortar 1:4 all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, all as specified and directed.

M&L for Brushing neat cement slurry with 3.00 kg of cement per sq. metre all as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes all as specified and directed.

M&L 1200mm x 600mm vetrified tiles of wooden pattern of 8 to 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tilesall as specified and directed. Note : The above item will be executed by applying tile adhesive of approved make and as per manufacture instruction.

S&F pre-painted galvalume aluminium zinc coating GI based trapezoidal/ mangalore tile profile roofing sheets, chajjas, 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively, profile hi\eight 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any height of the bldg all as specified and directed.

M&L for excavating in trenches n.exc 1.5m wide & n.exc 1.5m in depth & getting out in soft/loose soil complete all as specified and directed .

Excavating in post holes in soft/ loose soil (or similar holes) each n exc 0.5 cum and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified & as directed.

Cleaning the existing reinforcement with wire brush/ rotary wire brush to make surface free from rust scales, loose material, dirt etc. complete and providing and , applying two coats of alkaline rust converting primer confirming to ASTMB- 117, on the existing rebars and allowing it to react with rust for 6 hrs and form a corrosion resistant, insoluble and adherent protective layer , including cleaning the reinforcement,wirebrushing to remove loose rust spalls, with time interval of 1hour between the coats. Name of Manufacturer: BASF/Fosroc/Sika/ Dr Fixit

Providing and application full and unbroken coating of anticorrosive protective zinc rich epoxy coating on expose reinforcement in two coats with time interval of minimum 1 hours between each coat including mixing of both componants by weight as per mfg specifications, brush application, curing to form a anticorrosive protective coating with high mechanical strength to cementitious repair works all as specified and directed. Name of Manufacturer: BASF/Fosroc/Sika/ Dr Fixit

Rebuilding the section of damaged RCC elements to its original size or as per consultants recommandations in thicknesses of 40-100 mm by providing and casting with microconcrete of grade M-40 and above including providing and fixing of water tight foam faced finish shuttering of minimun 18 mm thick with supporting frame work all lead lift, mixing, placing, de-shuttering, levelling the surface by grinding off cementious slurry or construction joint differences if any to satisfaction of engineer. incharge, curing etc. complete.(Rate including- cube test to be conducted for every 5 M.T. workdone.6 no's of sample required per test). Ensure the quality of water by testing water as per IS 456 and document the same. Ensure temperature at time of mixing should be between 25 to 40 degree celcius by electronic temperature gauge Name of Manufacturer: BASF/Fosroc/Sika/ Dr Fixit Note : The above item incl water tight shuttring/ Formwork of any shape and size.

Mixing and applying SBR latex modified cementitious bond coat using cement 2.2 kg per square metre on prepared concrete surfaces of parent material all as specified and as directed Note: SBR latex shall be paid for separately.

Supply only approved SBR latex from FOSROC/BASF/DR FIXIT/ SIKA for bonding coat all as specified and directed. Note: Rate shall be in terms of solid contents of polymer.

M&L for minor cleaning work, removal of loose concrete and filling cracks with polymer modified mortar using SmartCare RP or Epoxy Mortar and supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, SmartCare Ultron liquid membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying SmartCare Ultron or approved equivalent in two coats at 1.5 kg per Sqm etc, complete as per Manufacturer specifications. Supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, SmartCare Ultron liquid membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying SmartCare Ultron or approved equivalent in two coats at 1.5 kg per Sqm etc, complete as per Manufacturer specifications over and including 30mm thick PCC (1:2:4) type B-0 for padding on roof surfaces and 10mm thick readymix plaster mortar using liquid water proofing compound applying while concrete is green and all other similar works complete all as specified and directed (DR Fixit or any equivalent). NOTE: PU treatment shall be done by authorized applicator and work shall be executed in the presence of company rep.

M&L for preparing newly plastered surfaces and applying 3 coats of white wash on surface of wall all as specified and directed.

M&L for GI powder coated frame work for seamless ceiling 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre all as specified and directed.

M&L for 8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 605 X 605 mm grids all as specified and directed. Note:- Frame work for ceiling shall be measured and paid separately.

S&F Aluminum tubular hallow section not less than 50 x 25 mm not exceeding 900 mm c/c on exceeding columns/beam/ slab to hold cladding and fixing Aluminium composite panel cladding plain metallic of approved colour/ shade to beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour all as specified and directed. The ACP will nto be less than 6 mm thick.

S&F for Steel rolling shutters 1.25mm thick, with ball bearing, including all necessary fittings and accesssories like check plate, flag post, roller assembly, guides, curtain, bottom lath, top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type all as specified & directed.

S&F for Safety lever locks mild steel with 4 levers for rolling shutters all as specified and directed.

M&L PCC type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in flooring and other similar works all as specified & directed

M&L for crushed sand filling under precast interlocking paver blocks and all other similar works all as specified and directed.

M&L rubber moulded glossy finished precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-40 grade laid over sand cushning including compaction of paver blocks using surface vibrator all as specified and directed. Make: Ultra Tiles, Nitco, Mehtab Tiles, Pavit, Shino. Note :- Sand cushioning shall be paid separately under relevant item.

M&L for digital coloured glazed ceramic tiles 300x600 7mm to10mm thick in vertical surfaces (including designed borders) such as skirting and dados set and jointed in neat cement slurry and pointed in coloured cement to match the shades of the tiles laid over rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed. Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates)

M&L for any coloured digital ultra strong / heavy duty outdoor anti skid vitrified tiles 15-18 mm thick (Square / Rectangular) polished area of each tile exc 0.09 Sqm and not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles and including 20 mm thick in cement plaster in CM (1:4) for fixing tiles anywhere all as specified and directed.

S&F for Auto Clean Chimney of Size:60 cm suitable for 2-4 burner stove for wall mounted chimneys having Suction Capacity: 1200 m3/hr For kitchen size >200 sqft & heavy frying/grilling and also heaving the following features product Dimensions48D x 60W x 52H Centimeters, Colour Black Special Feature Auto Clean; Touch Control, Auto Clean, Touch Control Finish Type Christmas, MaterialGlass, Noise Level 58 dB Mounting Type Wall Mount ,Included Components Chimney Controls Type Touch Warranty: 5 years on Motor and 2 years comprehensive. all as specified and directed by manufacturer instructions Notes:- The above item includes the switch and socket required to give power to the chimney and also the connection to the existing line

RUPESH CONSTRUCTION CO

ASHOK CONSTRUCTION

Bright Construction Co

David Construction Co.

MAHESH ENTERPRISES

GANGAJAL

Bidder Name

Unitech Enterprises

ASHOK CONSTRUCTION

David Construction Co.

Bright Construction Co

GANGAJAL

MAHESH ENTERPRISES

RUPESH CONSTRUCTION CO