E-Tender No. 77/2023-24, EUDC-II, Noida.

Amount

fo|qr uxjh; forj.k [k.M & r`rh; uks,Mk ds {ks= esa iz.kkyh lqn`<hdj.k ds vUrxZr ,y-Vh- ykbZu esa LFkkfir ttZj ,l-Vh- ,oa ih-lh-lh- iksy cnyus dk dk;ZA

Safe carriage of following stock material, from any of the Store Center of PVVNL to work site including Loading from Store and safe unloading at site for Item No. 3 to 8

11 Mtr. Long ST Pole

8.5 Mtr Long PCC Pole

11 Pin Insulator with Pin

SUPPLY OF FOLLOWING MATERIAL BY THE CONTRACTOR FROM THE PVVNL APPROVED VENDORS AS PER GTP APPROVED.

V Type Cross Arm 100x50x6 mm G.I channel for 11KV line.

GI Wire 6 SWG

Stay set complete (G.I.Stay rod 16x1800mm, Stay wire 5Kg, Guy insulator, G.I.Stay clamp, bolt, nut & wasther with concrete grouting) for 11KV line as per specification

Supply and Errection of the Following material for completing the work as per RESPO.

Providing and Fixing of Clamp suitable for 11 Mtr. Long ST Pole with Nut, Bolt and Washers as per site requirement.

Providing and Fixing of Clamp suitable for 8.5 Mtr. Long PCC Pole with Nut, Bolt and Washers as per site requirement.

Providing and Fixing of LT Shackle Insulator as per site requirement.

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 'F' bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required. Single Pole (a) ST Pole 11 MtR Long and 8.5MTR. PCC POLE

Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming. Single Pole and Double Pole (a) ST Pole 11 MtR Long and 8.5MTR. PCC POLE

Fixing, tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing, including providing & fixing of Stay Insulators of 11KV and Stay Clamps.

Grouting of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:3:6 cement, sand, 20mm Stone grift) as per drg. Including back filling of soil and proper ramming etc.

Providing and Driving of MS earth rod of size 20x2500 mm in earth and jointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballast in ration 1:4:8 in Block 600*600*300 mm with binding & nuzzling including providing & fixing of stay insulator complete in all respect with grouting. (All Work and Material in the scope of Contractor)

Fixing of V type Cross Arm as per site requirement.

Fixing of 11KV Pin Insulator with Pin as per site requirement.

Guarding between two poles like single poles, double poles, four poles, etc. to guard L.T., 11KV Line telephone line and river crossing, road crossing etc. with G.I.wire No.6SWG, G.I.wire No.8SWG and G.I.wire No.16SWG including cutting with fabrication and fixing of G.I.Guarding angle 75x75x6mm with Providing & fixing G.I.clamps size 75x10mm, G.I.Turn buckle, G.I.Eye bolt, nut bolts & washer etc, as per drawing.

Dismentaling of Old and Damaged ST Poles 11 Mtr Long and 8.5Mtr PCC Poles after safe removal of accessoriess and safe carraige of its from site to any PVVNL Store including loading and uloading both ends.

M/S SURYA ELECTRICALS