8357-REPAIR/MAINT OF EXTERNAL WATER SUPPLY, PUMP SETS, DG SETS CLEANING OF OH TANKS, UG SUMPS, WELLS AND OTHER CONNECTED WORKS AT MH, DEF COLONY, NANDAMBAKKAM AREA AND PALLAVARAM ARMY CAMP UNDER GE STM

Amount

Excavating in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation for laying pipes etc and getting out in Hard / Dense soil all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in Hard/Dense soil all as specified and directed.

Removing excavated material/ surplus soil not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meter above the starting point all as directed.

Taking up or down CI/DI tubing and connections including fittings of following sizes bore in any length complete from trenches / walls / floor / roofs etc. all as specified and directed.

(a) 150 mm dia bore

(b) 100 mm dia bore

Taking up or down steel tubing and connections including fittings of following dia bore in any length complete from trenches / walls / floor / roofs etc. all as specified and directed.

(a) 100 mm dia bore

(b) 80 mm dia bore.

(c) 40/50mm dia bore.

(d) 20/25 mm dia bore.

(e) 15mm dia bore.

Supply and laying and testing GI tubing of following sizes bore galvanized medium grade of any length including all fittings such as bend, elbow, tee and union laid in trenches or on floors/ walls/ceilings etc. and connections complete all as specified and directed.

(a) 15 mm bore

(b) 20 mm bore pipe

(c) 25 mm bore pipe

(d) 40 mm bore pipe

(e) 50 mm bore pipe

(f) 80 mm bore pipe

(g) 100 mm bore pipe

M&L and testing of DI Pipes of following sizes bore (including all fittings) with spigot/flanged and socket ends and rubber tyton joints including all fittings class k-7 suitable for rubber tyton joints complete and connections complete all as specified and directed by Engr-in-Charge.

(a) DI Pipes of 100mm bore

(b) DI Pipes of 150mm bore

Replacement in repair of unserviceable gun metal globe or gate valve of brass heavy duty ISI marked with iron wheel head, butterfly handle screwed both ends for iron pipe of following sizes bore including taking out old one complete in place of all as directed fixed in wall and ground.

(a) 15 mm bore

(b) 20mm bore

(c ) 25mm bore

(d) 40mm bore

(e) 50mm bore

Replacement in repair of unserviceable cast iron sluice valve IS 14846 -200 PN1.6 both flanged heavy duty drilled and installed with brass spindle gun metal face rings rubber gasket 3mm thick MS bolts nuts and washers graphite rope complete including taking down the old unserviceable valves for following sizes bore.

(a) 80mm bore

(b) 100 mm bore

(c) 150 mm bore

(d) 200 mm bore

Replacement of foot valve cast iron flange type heavy duty complete with gasket, bolt & nut, washer etc conforming to IS 4038 duly fitted in suction line of centrifugal pumpset/ monoblock pump set inside the UG sump including taking out old one all as specified and directed of following dia bore:-

(a) 50 mm bore

(b) 80 mm bore

(c) 100 mm bore

Replacement of cast iron double flanged non return butterfly valve of size 100mm as per IS 5312/2004, PN 1.6 and body seat of gun metal of size 100mm including rubber gasket, bolt & nut and washers etc including taking out old one complete all as specified.

ALL as per item No.11 here in before but for 80 mm bore

ALL as per item No.11 here in before but for 50 mm bore

M & L Cutting the existing bituminous road / cement concrete surface 150 mm thick to the required width and depth for laying pipe line and making good the disturbed area to match with existing complete all as specified.

Demolition of the existing unserviceable valve chamber, M & L for construction of brick masonry (230 mm thick wall) valve pit of size 600 x 600 x600mm inner dimension including necessary earth work , PCC 1:4 8, 75 mm thick Type D-2 using 40 mm graded stone aggregate as in foundation , brick wall build in CM 1:6, rendering 15 mm thick with CM 1: 6 externally upto 15 CM below GL and CM 1:4 internally and providing angle Iron base frame and MS Sheet cover 3.15 mm thick welded with hinges including necessary locking arrangement with handle, in and including dismantling & taking down old unserviceable broken Covers Complete. all as specified and directed by Engr-in-Charge.

All as per item No.15 here in before but of size 900 x 900 x 900 mm depth

All as per item No.15 here in before but of size 1000 x 1000 x 1000 mm depth

Supply & Fixing for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) suitable for following sizes in & including replacement old valve complete all as specified.

(a). 20mm bore pipe

(b). 25mm bore pipe

(c). 40mm bore pipe

M&L for Mild steel man hole covers for sump / water storage tank / filter plant channels, Made out of 3 mm thick MS sheet with fixed on the man hole / inspection holes of the sump / water tank / filter plant channels with steel frame (Fe 410-W Gde E- 250 Quality B) and locking arrangements at any position, any height, all as required at site all as per direction of engineer in charge including dismantling taking down old unserviceable broken Covers Complete.

M&L of Mild steel Stairs (framed) for over head tank including stringers, treads, landing, balusters, hand rails etc. including cleats, brackets, etc. with steel frame (Fe 410-W Gde E- 250 Quality B) complete all as required at site all as per direction of engineer in charge including dismantling taking down old unserviceable broken stairs Complete.

Supply and fix Gland rope to sluice valve 80mm to 150mm , pumps (graphite rope ) (size 1/2",1/4",3/4") including taking out old unserviceable all as directed.

Supply and Fix MCCB 3 pole 25 to 100 Amps with breaking capacity 16 kA, 415 Volts, 50 Hz AC as per the site Requirement including taking down of old unserviceable all as directed.

All as per item No.22 here in before but of capacity 160 Amps 35/36 KA

Supply and Fix MCCB 4 pole 63 Amps with breaking capacity 16 KA, 415 Volts, 50 Hz AC as per the site Requirement including taking down of old unserviceable all as directed.

Supply and Fix MCCB 4 pole 100 Amps with breaking capacity 25kA, 415 Volts, 50 Hz AC as per the site Requirement including taking down of old unserviceable all as directed.

Supply and Fix MCCB 4 pole 125 Amps with breaking capacity 25kA, 415 Volts, 50 Hz AC as per the site Requirement including taking down of old unserviceable all as directed.

Developing / flushing of bore wells for a period of 6 hours using compressed air method upto availability of crystal clear water including removing and fixing the installation in original location all as specified and directed.

Supply and fixing HDPE pipe joint including necessary heat of HDPE pipes, flanges bolts, nuts, washers, rubber packing all as required at sit at any position and location incl necessary excavation, returning refilling removing old unserviceable HDPE flanges nuts bolts

(a) 110 mm bore

(b) 90mm bore

(c) 63mm bore

Dismantling the defective mono block or Jet pump set of capacity 3 to 5 HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling/greasing, lubricating the parts including repair / replacement of worn out parts and spray painting with one coat of existing colour paint and writing SM/MES No with white paint and installation commissioning and testing on full load complete all as specified and directed by Engineer - in - Charge. Note:- (i) The rate quoted for this item shall includes labour charge only for main repair and replacement of defective/UNSV spares/accessories. Spares are to measured and paid separately under subsequent items. (ii) Cost of other minor items/spares such as nut, bolts washers, gaskets, paints etc which are not covered under Sch 'A' but required for effective functioning of the plant shall be deemed to included in this item.

All as per Item No. 29 above but for capacity 7.5 HP three phase monoblock pump set

All as per Item No. 29 above but for capacity 10.0 HP three phase monoblock pump set

All as per Item No. 29 above but for capacity 15.0 HP three phase monoblock pump set

All as per Item No. 29 above but for capacity 20.0 HP three phase monoblock pump set

Supply only the following items /parts for 3 to 5 HP mono block pump sets

(a) CI Impeller

(b) Ball bearing

(c) motor coupling assembly with tyre

Supply only the following items /parts for 7.5 HP mono block pump set

(a) CI Impeller

(b) Ball bearing

(c) Motor coupling assembly with tyre

Supply only the following items /parts for 10 HP mono block pump sets-02 nos

(a) CI Impeller

(b) Ball bearing

(c) Motor coupling assembly with tyre

Supply only the following items /parts for 15 HP/20HP mono block pump sets

(a) CI Impeller

(b) Ball bearing

(c) Motor coupling assembly with tyre

Dismantling the motor of monoblock pump set of capacity 3.0 to 5.0 HP removing the existing burnt out winding and rewinding with copper winding wire of existing gauge and weight including replacement of all insulation material and terminal lead for AC single phase 230 volts grade and other petty items required for making motor functional and motor reassembling and shifting back to pump house and testing complete all as directed by

All as per Item No.38 above but for capacity 7.5 HP three phase monoblock pump set

All as per Item No.38 above but for capacity 10.0 HP three phase monoblock pump set

All as per Item No. 38 above but for capacity 15.0 HP three phase monoblock pump set

All as per Item No. 38 above but for capacity 20.0 HP three phase monoblock pump set

Dismantling the defective centrifugal pump set of capacity 20 HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling/greasing, lubricating the parts including repair / replacement of worn out parts and spray painting with one coat of existing colour paint and writing SM / MES No with white paint and installation commissioning and testing on full load complete all as specified and directed

Supply only the following items / parts for 20HP centrifugal pump set

(a) CI Impeller

(b) Ball bearing

(c) Shaft

(d) Motor coupling set

Dismantling the motor of centrifugal pump set of capacity 20 HP, removing the existing burnt out winding and rewinding with copper winding wire of existing gauge and weight including replacement of all insulation material, and terminal lead for AC, 3 Phase, 415 volts grade and other petty items required for making motor functional and motor reassembling and shifting back to pump house and testing complete all as directed

Taking out defective submersible pump set of capacity upto 3/4/5 HP from bore well for repair by lifting GI tubing of size 50 mm from up to 220 feet depth after disconnecting electrical and pipe line connection, complete by means of chain pulley block or other T&P, transporting to workshop including repair/replacement of worn out parts, servicing and overhauling complete with oiling/greasing, lubricating the parts and reassembling and painting of submersible pump set with motor with one coat of synthetic enamel paint after clearing and scrubbing and shifting back to bore well, lowering commissioning and testing on full load complete all as specified and directed

All as per item No.46 hereinbefore but for capacity 7.5HP submersible bore well pump set

Supply only following items / parts for 3/4/5HP submersible bore well pump set.

(a) Thrust bearing complete

(b) Gun metal bearing bush.

(c) Stainless steel studs and nuts

(d) Shaft for pump

(e) Bowl assembly

(g) Oil seal body

Supply only following items / parts for 7.5HP submersible bore well pump set.

(a) Thrust bearing complete

(b) Gun metal bearing bush.

(c) Stainless steel studs and nuts

(d) Shaft for pump

(e) Bowl assembly

(g) Oil seal body

Dismantling the motor of submersible (vertical type) pump set of capacity 3 HP, removing the existing burnt out winding and rewinding with PVC copper winding wire of existing gauge and weight including replacement of all insulation material, "O" rings and filling of cooling oil with oil seal and terminal lead for AC, 3 Phase, 415 volts grade and other petty items required for making motor functional and motor reassembling and testing complete all as directed

All as per item No.50 hereinbefore but for capacity 5 HP submersible bore well pump set

All as per item No.50 hereinbefore but for capacity 7.5 HP submersible bore well pump set

Taking out defective submersible open well/ sump pump set of capacity 3/4/5HP from open well/UG sump for repair by lifting GI tubing of size 50 mm from up to 40feet to 10 to 15feet depth after disconnecting electrical and pipe line connection, complete by means of chain pulley block or other T & P, transporting to workshop including repair/replacement of worn out parts, servicing and overhauling complete with oiling/greasing, lubricating the parts and reassembling and painting of submersible pump set with motor with one coat of synthetic enamel paint after clearing and scribbling and shifting back to open well/ UG Sump, lowering commissioning and testing on full load complete all as specified and directed

All as per item No.53 hereinbefore but for capacity 7.5HP submersible open well pump set

All as per item No.53 hereinbefore but for capacity 10HP submersible open well pump set

All as per item No.53 hereinbefore but for capacity 20HP submersible open well pump set

Supply only following items / parts for 5HP submersible open well pump set.

(a) Thrust bearing

(b) Gun metal bearing bush.

(c) Stainless steel studs and nuts

(d) Impeller

(e) Seal

(f) Impeller key

(g) Rotor sleeve

Supply only following items / parts for 7.5HP to 20 HP submersible open well pump set.

(a) Thrust bearing

(b) Gun metal bearing bush.

(c) Stainless steel studs and nuts

(d) Impeller

(e) Seal

(f) Impeller key

(g) Rotor sleeve

Dismantling the motor of submersible open well / sump pump set of capacity 3/4/5HP, removing the existing burnt out winding and rewinding with PVC copper winding wire of existing gauge and weight including replacement of all insulation material, "O" rings and filling of cooling oil with oil seal and terminal lead for AC, 3Phase, 415volts grade and other petty items required for making motor functional and motor reassembling and testing complete all as directed by Engineer-in-Charge

All as per item No.59 hereinbefore but for capacity 7.5HP to 10 HP submersible open well pump set

Replacement of submersible PVC insulated cable of 650/1100 volts grade 3 core with flexible copper conductor water resistant quality ISI marked in replacement of following sizes.

(a) 3 core 6sqmm

(b) 3 core 4sqmm

(c) 3 core 2.5sqmm

Material and labour for servicing DG Set Engine complete oil servicing, necessary replacement of below mentioned spares and servicing work for 250 KVA DG Set.(a) Diesel Filter (Pre+micro) - 2Nos, (b) Engine Oil filter (Spain-on type) - 2 Nos, (c) Engine Oil as required, (d) Radiator Coolant - 5 Ltrs.(e) Display board digital type of DG set 250 KVA.

Material and labour for general oil servicing of DG Set Engine complete and replacement of below mentioned spares and servicing work for 82.5 KVA DG Set .(a) Diesel Filter (Pre+micro) - 2Nos, (b) Engine Oil filter (Spain-on type) - 2 Nos, (c) Engine Oil as required, (d) Radiator Coolant - 1 Ltrs.

Material and labour for general oil servicing of DG Set Engine including minor defects rectification like Auto ON/OFF, Alarm, Battery charging, complete and replacement of below mentioned spares and servicing work of capacity 15 KVA, all as specified and as directed.(a) Diesel Filter (Pre+micro) - 2Nos, (b) Engine Oil filter (Spain-on type) - 2 Nos, (c) Engine Oil as required, (d) Radiator Coolant - 1 Ltrs

Dismantling self starter of any make from diesel engines of any make, opening up, servicing including replacement of armature coils bushes carbon brushes, springs, screws, etc., assembling back, re-fixing and testing for genset capacity following capacity:-

(a) DG set 250 KVA

(b) DG set 15 KVA

Battery lead with flexible copper conductors PVC insulated of size single core 50 sqmm suitable for 12/24 volts batteries .

Battery terminal clamp with bolts and nuts, brass suitable for 50 sqmm single core copper multistraded cable and 12 V, 180 AH battery terminal posts.

Terminal socket for battery lead copper suitable for 50 sqmm single core copper multistranded cable

PVC transparent pipe 8 mm bore dia and 2 mm thick connecting upto for fuel inlet/overflow links, fuel tank, fuel indicator

Dismantling battery, replacing unserviceable terminal posts PVC cap re-charging the battery to the required standard replacing the electrolyte all as specified ad directed for12 Volts battery upto 180 AH capacity.

M&L for old painted surface of Gen Set of any make/model /capacity and applying one coat of synthetic enamel paint including writing MES No after cleaning and rubbing the existing surface of Gen Set complete all as specified and directed.

Cleaning the internal surfaces of Over Head Tank at any height / staging by scrapping down/brushing and removing all silt dirt, algae etc from walls, floors, washing/ cleaning with water and applying one coat of white wash to all internal surfaces of walls and ceilings and one coat of cement base paint to all external surfaces including top surfaces of OH tanks at any height and any position. All old steel surfaces such as vent pipes, inlet, outlet pipes, ladder shall be provided with one coat of anti corrosive bituminous paint and old MS pipe railing shall be scrapped properly and shall be painted with one coat of synthetic enamel paint. Paintings to oblitering labels shall be not less than 60x40cm using black paint same as existing dimensions and writing particulars etc using white paint with height of letters same as existing writing complete all as directed for 10000 gallons capacity NOTE : proper safety measure must take while painting.

All as per item No. 72 above but for 20,000 gallons capacity

All as per item No. 72 above but for 40,000 gallons capacity

All as per item No. 72 above but for 50,000 gallons capacity

All as per Ser item No.72 herein before but 100000 gallons capacity

Preparing the old steel / MS tubing and CI painted surfaces of pipe line with one coat of synthetic enamel paint black colour to existing suction pumping line near the pump house sump to pump house from pump to delivery line through raising and delivery main of the Overhead tank of following sizes of pipe:

(a) DI /CI/GI Pipe 100 mm dia

(b) MS/CI/DI pipe 80 mm dia

(c) MS /CI/GI pipe 50 mm dia

(d) CI/GI pipe 25 mm dia

Cleaning the internal surfaces of Under Ground Sump by scrapping down/brushing and removing all silt dirt, algae etc from walls, floors, washing/ cleaning with water and applying one coat of white wash to all internal surfaces of walls and bottom of room. All old steel surfaces such as vent pipes, inlet, outlet pipes, ladder shall be painted with one coat of anti corrosive bituminous paint. ONE coat synthetic outdoor anti corrosive bituminous paint in outdoor surface at any height at any position. Paintings to oblitering labels shall be not less than 60 x 40 cm using black paint same as existing dimensions and writing particulars etc using white paint with height of letters same as existing writing complete as directed by Engr-in-charge for 5000 gallons capacity

All as per Ser item No.78 herein before but 7500 gallons capacity

All as per Ser item No.78 herein before but 10000 gallons capacity

All as per Ser item No.78 herein before but 20000 to 50000 gallons capacity

All as per Ser item No.78 herein before but 300000 gallons capacity

Desilting of open / shallow wells of following size mentioned below by bailing out of water from the well through pump set, removing the silt (mud/sand etc) from the floor of the wells and depositing not exceeding 50 metre, cleaning the inside vertical surface of the wells with wire brushes including removing the large growth and removing the large floating on the water completely all as specified and directed.

(a) Well dia of 30 feet and 30/40 feet depth

(b) Well dia of 25 feet and 25 feet depth

Servicing of LT Panel Board of any size , cleaning of panel board internally and externally Tightening of all screws and bolts & nuts replacing of minor parts like screws, washers lugs etc checking of serviceability of all switch gears , insulating the live parts, including welding and painting all as specified and as directed

Preparation of old painted by scraping / cleaning with wire brushes to remove the old painting from pump & motor installed at all pump house and painted with one coat of approved enamel paint all as directed .

Supply and fix direct on line starter three phase suitable upto 7.5 HP Pump set in sheet metal enclosure, 415V, including taking out old unserviceable all as directed.

Supply and fix Auto star delta starter with three phase, 415 volts, with and including prevention facility suitable for upto 10HP pump set including taking out old unserviceable all as directed.

Supply and fix Auto star delta starter with three phase, 415 volts, with and including prevention facility suitable for 15 HP pump set including taking out old unserviceable all as directed.

Supply and fix Auto star delta starter with three phase, 415 volts, with and including preventer facility suitable for 20/25 HP pump set including taking out old unserviceable all as directed.

Supply and fix single phase preventor 3 phase 415 volts including taking out old unserviceable all as directed all as directed.

Supply and fix gun metal check valve screwed type of following sizes and fitting the suction pipe inside the UG sump including taking out old unserviceable all as directed.

(a) 80mm dia

(b) 50mm dia

Cutting the existing damaged 200mm dia CI line in position supply and inserting CI collar of 100mm and testing including necessary earth work at any depth and width at any location using JCB in sludgy soil, dewatering and refilling the same in layers complete all as specified and directed

All as per item No.92 here in before but of 150mm bore pipe

All as per item No.92 here in before but of 100mm bore pipe

M&L for run lead joint fixed including provision of spun yarn etc for following size of CI pipe fitting complete including removing the old joints all as directed.

(a) 80mm bore CI pipe

(b) 100 mm CI pipe

(c) 150 mm CI pipe

(d) 200 mm CI pipe

M&L for Flanged pipe joint fixed with rubber or fibre board gasket for following size of CI pipe fitting complete including removing the old joints all as directed. Note:- CI fittings connecting pieces, flanged end piece paid separately in relevant items.

(a) 80mm bore CI pipe

(b) 100mm CI pipe

(c) 150mm CI pipe

(d) 200mm CI pipe

Supply and fix cast iron(CI) Bends (any type, radius an angle) Tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, `Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs suitable for CI pipe of size upto 200mm bore.

Cutting the existing GI steel tubing following sizes bore and screwing the cut ends (or length) screw on pipe to form connector in trenches, floors or on walls and ceiling for alterations or addition and rejoining including connecting up with GI union, nipple and necessary GI fittings complete (Note: Excavation will be measured and paid separately)

(a) 15mm bore

(b) 20mm bore

(c) 25mm bore

(d) 40/50mm bore

Cutting the existing GI steel tubing 80mm bore and screwing the cut ends (or length) screw on pipe to form connector in trenches , floors or on walls and ceiling for alterations or addition and rejoining including connecting up with GI Flange complete (Note: Excavation will be measured and paid separately).

All as per item No.99 above but for 100mm bore pipe

M&L for attending break down/ leakages of rising main pipe line including PCC plinth / bituminous road cutting in various area (civil/army area) area/earth work by JCB as per required area & taking out GI/CI/DI pipe line of any size and relaying of pipes on location after rectification of leakage and making good with sand/PCC 1:2:4 type B-2 using 40mm graded stone aggregate matching with the existing surfaces complete all as specified and as directed by Engineer in charge. Note:-1. Cost of liaisoning with civil authority/municipal corporation & earth moving plant/JCB are included in item rates. 2. Cost of major materials ie pipe ,fitting and fixtures will be measured and paid separately with relevant items.

Supply and fixing in repairs of HDPE pipes PN-10 for following sizes bore including, flanges bolts, nuts, washers, rubber packing all as required at site at any position and location. Earth work measured and paid separately under relevant items. Note:- 1. The major break down ie. Pipelines and valves more than 100 mm bore included vide Srl No 99,100, 101 & 102 for emergency repairs has to be rectified within 08 hours for which necessary pipes, fittings, specials and labour force including machineries shall be kept in reserve. 2. Tenderers attention is invited to the penalty of 5% cost of affected item for every hours of delay beyond the 08 hours period.

(a) 150mm bore

(b) 100mm bore

(c) 65mm bore

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed .

Supply and fixing in repair of Soft Auto star delta starter, heavy duty with three phase, 415 volts suitable for 100 HP Centrifugal pump Set heavy duty at 100 ORs pump house with built in by contactor, motor protection for 75 Kw 140 Amps Make L&T or equivalent in Siemens / ABB with Timed voltage ramp, soft stop, protection of supply fault, shorted scr LED indication, Relay outputs 66 to 130, IP00 enclosure, complete wiring etc including necessary accessories, modification in panel all as required at site dismantling old unserviceable one.

Removing of old earthing including earth plate and M&L for Earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 Mtr below ground level with the top edge of earth plate at depth not less than 1.5 Mtr below ground level connected to galvanised iron earth strip 25x4mm by means of bolts, washers ,watering pipe 20mm dia, medium grade GI pipe, with welded funnel and wire mesh and 40mm dia medium grade GI pipe with fitting as protection pipe for strip from plate electrode to test point /plant/machineries etc. including necessary excavation and earth work in any type of soil, salt, charcoal dust, concrete pit in PCC (1:3:6) type C-I having outer dimension 60cmx60cmx60cm and internal dimension 30cmx30cmx30cm, pre-cast RCC 1:2:4 type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia deformed bares @15 cm centre to centre both direction and 10 mm dia MS handle of suitable size charcoal or coke and salt in alternative layers, necessary earth work in soft/loose soil all as shown in electrical plate No 3 of MES Schedule Part I and testing complete all as specified and as directed.

Disconnecting and taking out the old unserviceable LT UG cable in trenches, wall & pump house LT Panels and taken as credit including supply and laying in trenches /wall etc LT UG Cable XLPE insulated, armoured, heavy duty with multistranded aluminium conductor, 1100 volts grade conforming to IS specifications and of the following sizes:- Note: Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used wherever required while connecting cables to the panel board. Earth work such as excavation, refilling etc, shall be measured and paid separately under relevant item:-

(a) LT UG cable 4 core 16 sqmm

(b) LT UG cable 4 core 25 sqmm

(c ) LT UG cable 3.5 core 35 sqmm

Supply, lay / spread in trenches, sieving sand including cleaning, spreading, levelling, punning for laying /cushioning of cable all as specified and as directed. Note: Punned thickness shall be measured and paid.

Supplying and laying reinforced precast concrete cable cover, class LV, Type 1, flat, size 250 mm x 150mm x 40mm complete including removing old bricks from trenches and taken as schedule of credit.

M & L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and similar bands, plinth courses, string courses, lacing course, parapet, copings, kneelers, apex stones including necessary form work complete all as specified and directed.

SWIFTTECH ENGINEERS INDIA PVT LIMITED