Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹76.3 Laccepted-aoc | ₹76.3 L | accepted-aoc |
Tender Value
Refer Docs
EMD Value
₹1.6 L
Closing Date
19 Dec 2025, 9:30 pmClosed
Engineering Wing of Health and Family Welfare Department
Sri. Harish
Construction of Urban primary Health Center at Vidyanagar in Shivamogga Taluk, Shivamogga District.
EWHFWD/2025-26/BD/WORK_INDENT1394
EWHFWD/2025-26/BD/WORK_INDENT1394
Open
Buildings
Two Tender Document System(Two Cover)
EWHFWD Executive Engineer Office Bengaluru
6 documents required · 6 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
The Tenderer or his identified sub contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/KUWS&DB and should have executed similar water supply/sanitary engineering works totalling Rs. 1.40 Lakhs in any one year in the last Five year.
The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works issued by KPWD/Government electrical Inspectorate and should have executed similar electrical works totalling Rs. 2.12 Lakhs in any one year in the last Five year.
Executed in any one year, the following minimum quantities of work: 1)RCC/PCC 146.00 Cum 2) TMT Steel 9532.00 Kgs. 3) Plastering 1434.00 Sqm 4) Flooring -Ceramic / Vitrified Tiles / Granite / Dadoing 1036.00 Sqm
The Mandating satisfactorily completion as a prime contractor for at least one similar work i.e. related to Construction of building work of value not less than Rs. 40.10 Lakhs
GST Registration Certificate
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity- (AxNx2.5-B) where, A-Maximum value of civil engineering works executed in any one year during the last five years. N-Number of years prescribed for completion of the works for which Tenders are invited. B-Value of existing commitments and on-going works to be completed during the next 6 months
KPWD Class-III & Above Civil Contractor
Liquid assets and/or availability of credit facilities of no less than Rs. 24.06 Lakhs (Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc.,)
The tenderer should have been Achieved in at least TWO financial years a minimum financial turnover (in all classes of civil engineering construction works only) of value Rs. 80.19 lakhs. In the last five year i.e., 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25
₹2,010
₹1.6 L
19 Dec 2025
11 Dec 2025
20 Dec 2025
16 Dec 2025
Construction of Urban primary Health Center at Vidyanagar in Shivamogga Taluk, Shivamogga District.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...
Mechanical Means -
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of app...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick ma- sonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type
Fastener with t...
Providing and fixing aluminium die cast body tubular type universal hy- draulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700...
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- Complete with all lead ...
Providing and fixing chromium plated brass night latch of approved quality
including necessary screws etc. complete. ---- Complete with all lead and lift loading and unloading charges etc., work shoul...
Providing and fixing chromium plated brass handles of 100/125 mm with
necessary screws etc. complete ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out...
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...
Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm
with suitable washers weighing not less than 33 gms ---- Complete with all lead and lift loading and unloading charges etc., wo...
Providing and fixing bright finished brass butt hinges with necessary screws
etc. complete : 125x85x5.5 mm (heavy type) ---- Complete with all lead and lift loading and unloading charges etc., work sh...
supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- Complete with all lead and lift loading and unloading charges etc....
polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...
Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating ...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement c...
Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...
Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in...
Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including co...
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar t...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, p...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off c...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for...
Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly clean...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after ...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...
KSRB 4-2.12 : Extra for providing throating or drip moulding toR.C.C. chajja with plastering (labour charges only) as per specifications.
Specification No. KBS ---- Complete with all lead and lift loa...
Construction of Urban primary Health Center at Vidyanagar in Shivamogga Taluk, Shivamogga District. FF civil works
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick ma- sonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type
Fastener with t...
Providing and fixing aluminium die cast body tubular type universal hy- draulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700...
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- Complete with all lead ...
Providing and fixing chromium plated brass night latch of approved quality
including necessary screws etc. complete. ---- Complete with all lead and lift loading and unloading charges etc., work shoul...
Providing and fixing chromium plated brass handles of 100/125 mm with
necessary screws etc. complete ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out...
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...
Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm
with suitable washers weighing not less than 33 gms ---- Complete with all lead and lift loading and unloading charges etc., wo...
Providing and fixing bright finished brass butt hinges with necessary screws
etc. complete : 125x85x5.5 mm (heavy type) ---- Complete with all lead and lift loading and unloading charges etc., work sh...
supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- Complete with all lead and lift loading and unloading charges etc....
polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...
Integral Crystalline water proofing Admixture - Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the p...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...
Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating ...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, p...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off c...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly clean...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after ...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Construction of Urban primary Health Center at Vidyanagar in Shivamogga Taluk, Shivamogga District Sump & soakpit works
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Complete with all lead and lift loading and unloading charges etc., work shou...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Construction of Urban primary Health Center at Vidyanagar in Shivamogga Taluk, Shivamogga District WS works
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...
Providing and fixing brass bib cock of approved quality : 20 mm nominal bore ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specificatio...
Providing and fixing brass full way valve gate with C.I. wheel of
approved quality (screwed end) : 25 mm nominal bore ---- Complete with all lead and lift loading and unloading charges etc....
Providing and fixing brass full way valve gate with C.I. wheel of
approved quality (screwed end) : 32 mm nominal bore ---- Complete with all lead and lift loading and unloading charges etc....
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin...
Providing and fixing white vitreous china laboratory sink including making all connections including cost of fittings : Size 600x450x200 mm ---- Complete with all lead and lift loading and unloading c...
Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete. Semi rigid pipe : 40 mm dia ---- Complete with all lead and lift loading and unloading charges e...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel ...
Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, ...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and fixing PTMT grating of approved quality and colour. - Rectangular type with openable circular lid ---- Complete with all lead and lift loading and unloading charges etc., work should be ...
Providing and fixing PTMT Ball cock of approved quality, colour and make
complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. - 15 mm nominal bore, 105 mm long, weighing not less...
Providing and fixing C.P. brass stop cock (concealed) of standard design
and of approved make conforming to IS:8931. ---- Complete with all lead and lift loading and unloading charges etc., work shoul...
Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931 ---- Complete with all lead and lift loading and unloading charges et...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...
Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 2 HP, Size 50x40 Head 22M, Discharge 186 LPM ---- ...
Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark and its latest amendments. Upto 7.5 HP centrifugal pump ---- ...
Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 100mm x 100mm size P type with Non Modular common burnt clay bricks of designation 3.5& w...
Construction of Urban primary Health Center at Vidyanagar in Shivamogga Taluk, Shivamogga District Electrical works
Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2(Earth wire) FRLS multistrand PVC insulated copper wire (co...
Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2(Earth wire) FRLS multistrand PVC insulated copper wire (co...
Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2(Earth wire) FRLS multistrand PVC insulated copper wire (co...
Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall...
Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall...
Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall...
Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall...
Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall...
Supplying and flush mounting powder coated/Galavanized metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing me...
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6 amps one way switch ---- Complete with all lead and lift loading and unloadi...
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6 amps two way switch ---- Complete with all lead and lift loading and unloadi...
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6 Amps 3 way sockets ---- Complete with all lead and lift loading and unloadin...
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 stepped fan Regulator's ---- Complete with all lead and lift loading and unloa...
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 16 amps one way switch ---- Complete with all lead and lift loading and unload...
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6 amps Bell push ---- Complete with all lead and lift loading and unloading ch...
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6/16 Amps universal sockets ---- Complete with all lead and lift loading and u...
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 32A Dp switch ---- Complete with all lead and lift loading and unloading charg...
Supply and fixing one metal Fan box with round hook ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engi...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thickconfirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runnin...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thickwith suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thickwith suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thickwith suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and...
Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-69...
Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-69...
Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-69...
Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-69...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing miniature circuit breaker, on the existing MCB distribution board using necessary fixing materials and C type curve,indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board 16A-25A 2 pole ---- Complete with all lead and lift loading and unloa...
Supplying and fixing one of 230 V Ding dong bell and a flush type bellpush with gang box fixed on necessary wooden or rawl plugs using NFscrews with Remote Ding Dong Bell ---- Complete with all lead a...
Supplying of ......feet - PVC Batten with integrated LED tube.....W with high quality diffuser with Life of 25000 burning hours & 70 percent lumen maintenance with CRI more than 80. Power Input: 22...
Supplying of Exhaust Fan of 1440 RPM of 300mm (12") size with Bracket, blades complete for Light duty suitable to operate on 230V,50Hz, A.C.,supply ---- Complete with all lead and lift loading and unl...
Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc, for operation on 230 V, 50 cycles.Single phase AC supply conforming to ISS-374- 1979 and withdouble ball beari...
Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. 6 Amps pendent holder ---- Complete with all lead and lift loading and unloading charges etc., work shoul...
Supplying & fixing of retrofit type - LED bulb.......W with OPAL crylic diffuser comprising of LED source with CCT 6500 degree K, RI more than 70 percent . efficacy more than 80 lumen per watt, li...
Supplying of recess mounting non integrated type LED downlight...... W luminaire comprising of pressure decast/ extrudedaluminium housing, with spring loaded false ceiling clamps, LED ofPower/COB with...
Supply of LED Streetlight luminaire with pressure die cast aluminium housingbody for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycar...
Fixing all types and all capacities of fluorescent /false ceiling /spot light / CFL / LED fittings indoor on the wall/ ceiling /rafters / girders using 23/0.0076" twin twisted PVC insulatedwires, requ...
Fixing a ceiling / Wall mounting fan of all capacities and alltypes to the existing 'S'' hook with fan regulator to the existingboard together with supplying and fixing 5 A. ceiling rose,necessary len...
Extra length of GI pipe of class B 19mm dia for down rod ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of E...
Fixing one exhaust fan in the nitch already left in the wall with bolts & nuts and a 5 Amps, ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire ---- Complete with all l...
CABLES 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip
thickness and resistivity as per IS-3975...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers asdirected by the departmental staff 2.5 to 25 Sqmm ---- Complete with all lead and lift loading and u...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.cutouts and other equipment's on the meter board using 40 mm dia2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should ...
GI/Copper strips for grounding connections, using necessary fixing materials as required.25 x 3 mm GI strip ---- Complete with all lead and lift loading and unloading charges etc., work should be carr...
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to32/63 A three phase 4 wire whole current class-1 Accuracy EnergyMeter. ---- Complete with all lead and lift loading and unloading char...
Supply and Installation / Fixing / Provision of Outdoor typeThermoplastic Modular Panel enclosure with transparentPolycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof,dust proof, water pro...
Supplying of TPST with rewirable porcelain channels in SMenclosure. Made out of 14 SWG powder coated paint of approvedcolour 32A ---- Complete with all lead and lift loading and unloading charges etc....
Supplying and drawing Flexible Multicore Cable manufactured withelectrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin)PVCinsulationsheathed suitable forworking v...
Supplying push button operated direct online starter with an antiweldsilver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorrosi...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
12-KW-3-1394-Vidyanagar.docx
Tender Document • 0.76 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .