WELCOME MAINT AND MISC REPAIR TO OFFRS MD ACCN IN AREA-I AND REPAIR TO LEAKAGE, SEEPAGE IN BATHROOM, KITCHEN, ROOF AND SANITARY/PLUMBING FITTINGS TO OTM AND MD ACCN IN AREA IV OF AGE B/R (WEST) UNDER GE (W) COLABA, MUMBAI

Amount

M&L for preparation of old plastered or unplastered surface of ceiling by brooming down or steel wire brushing, moss and efflorescent salts and trading oil and greasy spots and applying one coat of Oil bound distemper on ceiling, complete all as specified and directed by Eng-in-charge.

M&L for preparation of old plastered or unplastered surface of wall , cornices by brooming down or steel wire brushing, moss and efflorescent salts and trading oil and greasy spots.and applying one coat of oil bound distemper on wall, complete all as specified and directed by Eng-in-charge.

M&L for complete removal of existing treatment & paints including preparation of old plastered or unplastered surface of wall and applying two coats of oil bound distemper over a coat of wall care putty of 1 mm thickness, complete all as specified and directed by Eng-in-charge.

M&L for prepartion of old painted wood or wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as directed by Eng-in Charge.

M&L preparing old painted steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as directed by Eng-in Charge.

Material and Labour for French polishing on old wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats through authorised applicators of paint manufacturers only of approved shade all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE, complete all as directed by Eng-in Charge.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins, arches, pillars etc, complete all as specified and directed.

Material and Labour for Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6, complete all as specified and directed.

M&L for Precast cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in block masonry with solid blocks exceeding 10cm width and setting in cement mortar (1:4), complete all as specified & directed by Engineer-in-Charge.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc, of any height, debris shall be through out of MoD area, complete all as specified and directed.

M & L for 5 mm thick cement plaster in CM (1:3) on ceiling surfaces and finish the surface fair and even without using extra cement, complete all as specified and directed.

M & L for rendring 15mm thick in cemet mortar 1:6 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra, cement complete all as specified and directed. Note : WPC will be measured and paid separately.

Supply only integral liquid water proofing compound, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surface of wall and applying two coats of oil bound distemper over a coat of wall care putty of 1 mm thickness, complete all as specified and directed by Engr-in-charge.

S & F in repair 0.5 to 1 mm thickness 3D acrylic washable wall papers fixed with adhsive as per manufacture instruction as in ceiling/coloumns and in vertical surface, complete all as specified and directed.approved sample as kept in GE Office.

S & F in repairs frosted film / sunfilm / logo in any type or design and size, complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame, complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame, complete all as specified and directed.

Taking down shutters of any description exc 1sqm but not exc 2.00 sqm each, complete all as specified and directed.

Taking down shutters of any description exc 2.00 sqm each, complete all as specified and directed.

S&F Solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR, complete all as specified and as directed. As approved by Accepting Officer.

S&F 30mm thick of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, uppling & fixing in the frame at site as per specification & drawing etc, complete all as specified and directed.

Supplying and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 70 MM X 45 MM size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position screwed with full body threaded star headed SS screws, complete all as specified and directed by Engineer- in - Charge

Supplying and fixing factory made 28-30mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F 2nd class hard wood 35mm thick Factory made plain framed panelled shutter any number of panels of timber flate on both sides, with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces the size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressed treated, complete all as specified and directed.

S&F 2nd class hard wood 35mm thick Factory made glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part I section 8 clause 8.24 (a) supplied and fixed to chowkats, complete all as specified and directed.

S&F Powder coated Aluminium anodised frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodisedaluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), complete all as specifiedall as specified and directed by Engr-in-Charge.

S&F in repairs anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete as per requirement and direction of Engineerin- charge all as specified.

S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specifiedall as specified and directed by Engr-in-Charge.

S&F Prelaminated particle board, thickness 9mm interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.

S&F 4.8mm thick sheet glass, ordinary quality and glazing in squares exceeding 0.5 Sqm in each pane, complete all as specified & directed by Engineer-in-charge.

S&F 3mm thick sheet glass, ordinary quality and glazing in squares exceeding 0.5 Sqm in each pane, complete all as specified & directed by Engineer-in-charge.

M & L for Plain sheet glass plain 3mm thick ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane including hacking out of old/broken glass, complete all as specified and as directed.

S & F in repairs 10 to 12 mm thick Toughned glass as in door shutters, plateform partition including necessary cutting to shape, drilling holes as reqd, jointing cleats, glazing clips, ruber neoprene packing, Stainless steel fittings such as handle 2 nos, 100mm hinge 3 nos, lock including keys 1 set, Stainless steel snap beading & screws, complete all as specified and directed.

S&F Stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixedd with tinned tacks or stainless steel wire staples or with wooden beads, stainless steel screws and nuts bolts etc, fixed as in repair, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint, first quality, over a coat of pink primer on wooden surface, complete all as specified and as directed.

S&F butt hinges (ISI Marked) 100mm size medium weight cold rolled ms in any type of chowkat or frame including welding if required, complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles (ISI Marked) fabricated type, anodised, complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt plate with hasp and staple (bolt type), 250 mm size and fixing in clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, fixed in repair, complete all as specified and as directed.

Supply and fix in repairs Aluminiumn anodised barrel tower bolts 200mm length of extruded section, complete all as specified and as directed.

S & F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as directed by Engr-in-charge.

S&F Door closer hydraulically regulated designation No 3 universal type suitable for door shutter 851mm to 1000mm vide and weight between 61 to 80 kg of aluminium (extruded section body) as in repairs, complete all as specified and as directed.

S & F in repair Double action floor spring ISI marked hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs, complete all as specified and as directed.

S & F in repairs 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate, bearing ISI mark complete including necessary welding work, complete all as specified and as directed.

S & F in repairs 150 mm over all length floor door stopper, bearing ISI mark, of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and as directed.

S & F in repairs rubber based door seal fixed to bottom edge of door shutter using small nails / self-adhisive type to minimise gap & avoid entry of insects inside house width min 50mm & length as required at site, complete all as specified and as directed.

S & F in repairs aluminum anodised barrel tower bolts (ISI marked) of extruded section 150 mm long, bearing ISI mark, complete all as specified and as directed.

S & F in repairs aluminum aodised sliding door bolts of 300mm long with hasp and staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, bearing ISI mark, complete all as specified and as directed.

S & F in repairs aluminum anodised handle (ISI marked) fabricated type extruded section of 150mm long, bearing ISI mark, complete all as specified and as directed.

S&F in repairs Stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fancy type, stops fixed with ss screws etc all as specified & directed as in repair . Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

S&F 18 to19 mm thick HDHMR board, prelaminated one side with decorative choice lamination & other side high glossy acrylic sheet of 3mm thick, exterior grade, fixed with screws to frame work as in cup borad & kitchen cabinet shutters and all other similar works, complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, complete all as specified and directed. Note : Work will be in patches or in bulk.

M & L 20mm thick Granite (of any type) machine cut in, wall lining, steps, jambs, pillars, window cills, skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing and including screed bed 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:6), complete all as specified and directed.

S & F in repair Vitreous china premium/1st quality urinal bowl type of white colour, of size 330x300x450mm incl providing and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, pointing urinal back in white cement; connecting for discharge pipe incl necessary packing, union incl urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms), complete all as specified and directed.

S & F in repair Vitreous china premium/1st quality urinal half stall type of white colour, of size 330x300x450mm incl providing and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, pointing urinal back in white cement; connecting for discharge pipe incl necessary packing, union incl urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms), complete all as specified and directed.

S & F in repair 6mm thick of size 600x450mm looking mirror fixed to wall with stainless steel plugs/ connecter/ spacers/ screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position, complete all as specified and directed.

S & F in repair Vitreous china squatting pan of Orissa patten size 580 x 440 white colour including CI S/P trap long size as directed joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in PCC 1:2:4, complete all as specified and directed.

Supply & fixing in repair vitreous china wash down water closet of Pedestal pattern white including making connection to trap and to flushing pipe etc complete and making good to floor, complete all as specified and directed.

S & F in repair Vitreous china premium/1st quality wash down water closet floor mounting EWC (One piece) P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections short connections pipe of length upto 600 mm and Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete and taking down existing of any description/size, complete all as specified and directed.

S & F in repairs plastic EWC seat cover, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S & F in repairs Flushing cistern of PVC 10 ltr capacity valveless syphonic action type, low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing, complete all as specified and directed.

S & F in repairs Vitreous china premium/1st quality wash basin (under counter), white, size 550x400 mm including all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

S & F in repairs Vitreous china premium/1st quality wash basin (counter top), white, size 550x460 mm including all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

S & F in repairs Vitreous china premium/1st quality wash basin flat back white, size 630x450 mm including all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

Supply and fixing in repair of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore fancy type, complete all as specified and directed.

S & F in repair Bib taps, CP, fancy type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete fixed, complete all as specified and directed.

S&F in repairs 15mm bore stop valves, cast copper alloy, chromium plated fancy type with long shank cup (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repairs Angular Stop Cock, CP, fancy type with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete fixed, complete all as specified and directed.

S&F in repairs 15mm bore Brass CP basin mixer for mixing hot & Cold water screwed down for iron pipe, complete all as directed by Engineer in Charge.

S&F in repairs Brass CP wall Mixer 3 in 1 System with provision for overhead and hand shower suitable 15mm bore of pipe, complete all as specified and directed.

S & F in repairs brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.

S & F in repair brass chromium plated shower 15 mm bore single shower rose incl shower arm fancy type fixed to pipe all as specified and directed by Engr-in-charge.

S & F in repair Toilet paper holder with flat recessed type stainless steel, complete all as specified and directed.

Supply & Fixing 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections, complete all as specified and directed by Engr-in-charge.

Supply & Fixing 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections, complete all as specified and directed by Engr-in-charge.

S&F in repairs 15mm dia two way angle cock of brass, chromium plated fancy type glossy finish fixed, complete all as specified and directed.

S & F in repair CP Cockroch trap(127x127mm) with waste hole as per cat No FT-25 make Prayag and setting new one in CM 1:3, complete all as specified and directed.

S&F in repairs PVC connection 450mm long and 15 mm dia with brass fly nut at both ends, complete all as specified and directed.

Supply and fixing in repairs PVC Flexible waste pipe 32/40 mm dia having length 900mm with socket for steel sink/WHB upto floor level, complete all as specified and directed.

Supply & Fixing in repair Corner glass shelf size 300 mm radius with and including bracket and glass complete set etc, complete all as specified and directed.

Supply & Fixing in repair Glass shelf size 600 mm long with and including bracket and glass complete set etc, complete all as specified and directed.

S&F in repairs Tubular towel rail brass chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and directed.

Supply & Fixing in repair stainless steel Towel Rack with lower hanger size 24'' (600 mm) fixed to walls with hook etc., complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floors etc, complete all as specified and directed.

S&F in repairs PVC (SWR) bends 75 mm dia any radius with access door, complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bends/shoes any radius dia with access door,, complete all as specified and directed.

S & F in repairs 15mm Ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe, complete all as specified and directed.

S & F in repairs 20mm Ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe, complete all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm, complete all as specified and directed.

S&F in repair Kitchen sink without drainage board made of stainless steel 1 mm thick, with plugs, washers and waste pipe & coupling including bedding in cement morter to dwarft wall or including fixing GI cantilever brackets as per site requirement and connecting with suitable size of pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 178mm (or nearest size as per Cat Part specified), complete all as specified and directed.

S&F in repairs stainless steel plate rack of 600X750X250mm fixed to wall, complete all as specified and directed by Enginer in charge.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises, complete all as specified and directed.

M&L coloured double charged polished glazed vitrified tiles 10 mm thick (Square/rectangular) polished area of each tile exceeding 0.36 sqm but not exec 1 Sqm in floors/vertical set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

All as per item no 96 above but in vertical surfaces such as skirtings and dados.

M&L light shade vitrified coloured Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

All as per item no 98 above but in vertical surfaces such as skirtings and dados.

M&L HI-gloss digital ceramic tiles in vertical surface of size 600mm x 1200mm and 8-10mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles, complete all as specified and directed. Note: The above item will be executed by applying tile adhesive of approved make and as per manufacturer's instruction.

M&L glazed tiles digital coloured ceramic tiles 300x450x7mm/300x600x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to matc, complete all as specified and directed. Note:- Rate of designer border (Highlighter) tiles are included in this item.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc, complete all as specified and directed.

M&L rendering 10mm thick on fair faces of brick work in CM (1:4), complete all as specified and directed.

M & L for machine cut, polished cudappah stone work 20 to 25 mm thick (table rubbed and polished) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in kitchen platform, flooring and all other similar works, including laying over 15mm thick cement mortar (1:4), complete all as specified and as directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore, complete all as specified and as directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore, complete all as specified and as directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 40 mm dia bore, complete all as specified and as directed.

S/F GI tubing 15mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors, complete all as specified and as directed.

S/F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors, complete all as specified and as directed.

Supplying and laying of UPVC pipes 15mm SDR 11 & Plain CPVC SDR 11 fittings in trenches, complete all as specified and as directed.

Supplying and laying of UPVC pipes 20mm SDR 11 & Plain CPVC SDR 11 fittings in trenches, complete all as specified and as directed.

S/F GI tubing 40mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors, complete all as specified and as directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n, exc. 10cm girth, complete all as specified and as directed.

Demolition and breaking up drain pipes of dia 100 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and as directed.

Demolition and breaking up drain pipes of dia 75 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and as directed.

S&F PVC (SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips, complete all as specified and as directed.

S&F PVC (SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips, complete all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) bends, complete all as specified and as directed.

S&F in repairs 110 mm dia PVC (SWR) bends, complete all as specified and as directed.

S&F in repairs 75mm PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified and directed.

S&F in repairs 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) vent cowl, complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) white, including trap, connection to drain and flushing pipe (excluding flushing cistern) including seat cover for pedstal pan, complete all as specified and directed.

S&F in repair vitreous China wash basin white, flat back, size 580X450 mm including cutting for pinning in ends of brackets, complete all as specified and directed.

S&F in repair wall mounted water closet pan of size 510x360x360mm fixed with ancour fastener, outlet pipe & accessories of size, complete all as specified and directed.

S&F as in repair 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F as in repair 40 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F as in repair 15 mm bore fancy type 2-in-1 bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule with wall flange, complete all as specified and directed.

M&L in repair for 15 mm bore fancy type wall mixer with 115 mm long bend pipe for connection to overhead shower(with bush and piston Divertor fittings) with aerator, complete all as specified and directed.

M&L in repair for fancy type 15 mm bore central hole basin mixture with 'U' shaped round casted spout with 3" long pipe connection with aerator, complete all as specified and directed.

S & F in repair 15 mm bore, brass chromium plated, fancy type health faucet with SS connection pipe 1 mtr long, complete all as specified and directed.

S & F in repairs CP Towel Bracket (61 CM) long, complete all as specified and directed.

S&F Sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed.

Supply and fixing 15 mm bore overhead shower of size 150x150mm or 200mmx200mm single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 200 mm long(stainless steel) square shape with wall flange, complete all as specified and directed.

S&F for mirror cabinet PTMT of 400mm x 500 mm with megnetic looking arrangements fixed with and inclduling chromiplated brass screws and PVC rawl plugs, complete all as specified and directed.

S&F in repairs urinals half stall, flat back of size 355x340x535mm in snow white including each and all acessories, complete all as specified and directed.

S&F in repairs auto closing flushing valve for flat back urinals, complete all as specified and directed. Make: Jaguar (Item code-PRS-CHR-077. HSN code-84818020) / Kerovit / Parko

M&L in repair 75 mm dia PVC(SWR) multi floor trap with grating including jointing with solvent cement, complete all as specified and directed.

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced, complete all as specified and directed.

Material and labour for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete and sunken floor treatments, complete all as specified and directed.

Material and labour for clean the sunken portion of toilet/ Bath / WC/ Kitchen throughly remove dirt, dust etc, sanitary pipes entering through walls and floor shall be sealed with Dr Fixit Bathseal tape or eqvt and the gaps to be grouted with non-shrink cementitous grout "Dr fixit bathseal grout"or Eqvt and Applying three coat polyurethane waterproofing paint on new plastered surface as per manufature instruction for sunken portion, complete all as specified and directed.

Materials and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall putty, complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F for joist, channel, angle or tee sections, or MS Flats fixed independantly without connecting plates, etc Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume / CGI chajjas, complete all as specified and directed.

Demolition of ceiling boards of any description, and any thickness including cover fillets and frame work, complete all as specified and directed.

M & L for Powder coated aluminium snap grid having a size of 605mm x 605mm and sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285 and snap grid frame work shall be fixed to ceiling with supporting hanger 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers all as per manufacturer's instruction. The main & cross tees shall be jointed at junction/crossings with anodized aluminum angle bracket of size 19.05mm x 19.05mm x 1.45mm, weighing 0.14 Kg per RM, fixed with suitable mild steel, bolts nuts and washer all as per manufacturer's instruction, the snap grid shall be supported at ends all along the wall with anodized aluminum angle of size 38mm x 25mm x 2.18mm, weighing 0.358 Kg per running meter, complete all as specified and directed.

S & F of 9mm thick PVC laminated gypsum ceiling tiles size of 600mm x 600mm, square edge, front side laminated PVC and back side aluminium foil, complete all as specified and directed.

M & L for cement mortar (general purpose, factory made, for outdoor/indoor use having bulk density (of dry mix) 1600 kg per cubic metre, wet density (after mixing) 1800 kg percubic metre, dry density after setting 1800 kg per cubic metre,pot life 60 minutes, compressive strength 1.5 Mpa to 5 Mpa, made using well graded manufatured sand filler, portland cement & polymer binder and chemical additives) for rendering 15-12mm thick on brick wall or concrete surfaces including making groove of appropriate size and finishing sand faced finished using sponge including all necessary scaffolding arrangments of any height, complete all as specified and as directed.

M&L for plastering 20 mm thick average Polymer modified mortar (ready mix pack) in two coat 15 mm base coat and 5 mm finishing coat with and including curing as per manufacturer's instruction all as specified and as directed. Make : Dr. Fixit Repair Pro Polymer Mortar, Fosroc RENDEROC S2 structural grade polymer mortar, ShaliFix FRM Polymer Modified Fiber Reinforced Mortar of STP or equivalent as approved by GE

M & L for preparation of surfaces cracks of plaster internal/external of walls, ceilings/Chajjas upto 5 mm wide, remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat including necessary scafolding of any hieght, complete all as specifed and directed.

M & L for preparation of surfaces by cutting 'V' groove cracks of plaster internal/external of walls, ceilings/Chajjas all along the crack 5 mm to 10 mm and remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat and for external application must be coated with paint including necessary scafolding of any hieght, complete all as specifed and directed.

M&L for preparing New surfaces of walls/ceilings and applying two coat of weather proof acrylic exterior paint (100% Acrylic) of Apex Ultima,over a coat of primer and scaffolding where required at any hieght for external painting, complete all as specifed and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall putty, complete all as specifed and directed.

M&L for preparation of new or previously untreated surfaces and applying two coats of synthetic enamel paint over a coat of primer red oxide, zinc chrome complete all as specified and directed.

M&L for cleaning all loose laitance on the wall and concrete substrate and applying one coat of epoxy bonding agent of SBR latex on exposed concrete surface to ensure bond between old concrete & new concrete by brush application including scafolding at any height of bldg, complete all as specified and directed. Make: Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd or Nerolac perma SBR latex

S&F in repairs coloured glass mosaic tiles of size 25mm x 25 mm having thickness 6-8 mm for swimming Pool or any other places following SOP for Walls and Floor jointed & pointed with epoxy tile grout with the colour of tiles using water proofing tile in vertical & horizontal surfaces with tile adhesive mixed with latex admixture (MYK LATICRETE or equivalent) and 3mm wide joints pointed in matching colour of epoxy grout (MYK LATICRETE SP 100) or other equal & approved all to manufacturer’s printed instruction and laid to approved pattern on backing cement-sand render & screed (measured separately) all as specified and directed. Note : (a)Tile should be applied by experienced applicator who has completed swimming pool work at other places. Applicator must show its completed projects application to Engineer-in-charge before going ahead with works (b) Tile design sample has to be produced by the contractor and passed by GE before application.

S&F in repairs PVC tensile fabric structure with PVDF (polyvinyl-idene-fluoride) coating with all necessary fixtures, of any size and shape for making canopies, shed etc. fixed with mild steel structural frame work, weight of the fabric is considered, with fabrics ranging from 900 gsm to 1200 gsm, complete all as specified and directed. Note: (a) The shape/design of the sheds will be as approved by GE. (b) Cost of structural steel used will be measured and paid separetly under relevant items in this schdule. Make: Mehler/ Sieon/ Haytes/ Ferrari or equivalent as approved by GE.

Cleaning of RCC water tanks of 5000 to 10000 litres of various capacity in existing position by mechanised pressure cleaned by Mechanical high pressure spray and steel wire brush to remove algae/dirt/foregin completely and soaking out water/dirt with a high pressure wet vaccume pump and removing spoils outside of MD land and providing sticker showing the date of cleaning, complete all as specified and directed.

Cleaning of PVC water tanks of capacity exceeding 250 litres but not exceeding 500 litres including chemical treatment with Anti-bacterial agent consisting of following process: - Dewatering the tank with submersible pump, de-silting and removing of left over dirty water up to 100 to 150 mm in the bottom of the tank and sludge with special sludge pump, cleaning of walls and ceiling with special mechanized high pressure jet machines by rotary jet system at 100-120 Bar pressure (120 Kg /sqcm) which dislodges the layer of dirt, algae, fungus stuck on its surface usage of scrubbing machines for old stains and cleaning chemicals if required of make Eureka Forbes Ltd, floor of the dirty tank should be thoroughly cleaned up by fry jet cleaner to accumulate all dirt, the remaining sludge should than be removed by sludge pumps, the dirt silt and other foreign material should further be removed by Industrial Vacuum Cleaners to make the floor totally dirt free, application/spraying of Anti-Bacterial chemicals to ensure total sterilization of tank from the inside, inside of the tank should be treated with specially developed 4 ft long ultraviolet Radiator to kill further floating bacteria/virus in order to make the tank totally clean, bacteria free and safe for storage of drinking water. All the above operations should be executed by trained workers and technicians, properly dressed along with gum boots, to work as per the direction of Engineer in charge. Note : Date of cleaning will be imposed on water tank.

All as pe item No. 162 above but capacity exceeding 501 litres but not exceeding 1000 litres.

All as pe item No. 162 above but capacity exceeding 1001 litres but not exceeding 3000 litres.

All as pe item No. 162 above but capacity exceeding 3001 litres but not exceeding 5000 litres.

S&F Rotational moulded polyethylene or loft tank water storage tanks 250 litres (cylindrical vertical with closed top) hoisted and fixed in position including all fittings all as per existing requirements, including taking down old tank any type, complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks 500 litres (cylindrical vertical with closed top) hoisted and fixed in position including all fittings all as per existing requirements, including taking down old tank any type, complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position including all fittings all as per existing requirements, including taking down old tank any type, complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks 2000 litres (cylindrical vertical with closed top) hoisted and fixed in position including all fittings all as per existing requirements, including taking down old tank any type, complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks 5000 litres (cylindrical vertical with closed top) hoisted and fixed in position including all fittings all as per existing requirements, including taking down old tank any type, complete all as specified and directed.

binta construction (BID ID -3410649)

Frends Enterprises (BID ID -3410623)

Bright Construction Co (BID ID -3409036)

N F ENTERPRISES (BID ID -3410644)

RUPESH CONSTRUCTION CO (BID ID -3410656)

Panther Facilities (BID ID -3410144)