REPAIR REPLACEMENT OF CGI SHEETS FALSE CEILING OVER HEAD TANKS FLAME PROOF WIRING SWITCHES CIRCUIT BREAKER PANEL ETC OTHER CONNECTED WORKS AREA UNDER GE AF SRINAGAR

Amount

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc, all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified.

M&L for 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement, all as specified.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint Complete all as spicified.

Dismantling false ceiling frame work any type (aluminium snap grid, wooden etc), complete all as specified.

S&F anodised aluminium snap grid frame work for false ceiling size of grid 605x605mm including hangers 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia & 40mm long, all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, fillets including frame work (any type) etc, complete all as specified.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, all as specified.

M&L for gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions incl two coats of oil bound distemper over a coat of 1mm thick wall care putty incl necessary taping of joints etc, coomplete all as specified and directed.

S&F in repairs for 6mm thick asbestos cement plain building boards, fixed to timber framework with screws or in al snap grip frame as required at site in ceiling, all as specified.

S&F in repairs asbestos cement building board cover strips, 50mm x 5mm, with bevelled edges over joints including all mitres, etc., and fixed with screws complete all as specified.

S&F in repairs 12mm thick perforated particle board/ tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid fixed in ceiling, all as specified.

S&F in repairs wooden panelling of second class softwood 12mm thick with tongue and groove joint fixed in any position over and including wooden framework in second class softwood with plain fillets square or rectanglular in section clean sawn, secuired with nails/screws of sectional area exc 13 Sqcm and n exc 25 Sqcm at n exc 90cm centre to centre in both direction and including three coats of french polishing on all the exposed surfaces, complete all as specifed.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc 1.50 Sqm each, complete all as specified.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area exc 1.50 Sqm but n.exc 4.00 sqm each, complete all as specified.

S&F aluminium frame for doors, windows, ventilators with powder coating (minimum thickness of powder coating 50 micron) of any colour, with one or more rebates including joining cleat for fixing etc, complete all as specified.

S&F aluminium door shutters with powder coating (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., all as specified

S&F aluminium window and ventilator shutters with powder coating (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), complete all as specified.

S&F aluminium composite panels, 5mm thick as in doors, of any colour, shape, size and design fixed on aluminium frame work including all necessary fittings and fixtures and necessary taping, complete all as per manufactures instructions, complete all as specified.

S&F 5.5 mm thick sheet glass, ordinary quality with 25 micron solar control film reflective type sticked to glass panes as per manufactuerers instructions and glazing with glazing clips/oil putty in squares exceeding 0.5 Sqm in each pane, all as specified.

S&F 125 mm long butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified.

S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified.

S&F door closer hydraulicaly regulated, designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 KG, complete all as specified.

S&F 150mm long aluminium handles, cast type, anodised, complete all as specified.

M&L for taking down, easing and adjusting including renewal of unserviceable screws, etc. shutters of any description exc 1.00 sqm but n exc 2.00 sqm each and refixing in same opening, complete all as specified.

M&L for taking down, easing and adjusting including renewal of unserviceable screws, etc. shutters of any description exc 2.00 sqm each and refixing in same opening, complete all as specified.

M&L for resecuring or easing & adjusting without taking down shutters of any description exc 1.00 sqm but n exc 2.00 sqm each, complete all as specified.

M&L for resecuring or easing & adjusting without taking down shutters of any description exc 2.00 sqm each, complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and removal from site, complete all as specified and directed.

S&F 3 mm thick sheet glass,ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane, complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or galvanised wire staples fixed, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, and removal of debries from site complete all as specified and directed.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screw and washers, in roofs, walls etc with grade of zinc coating 275, all as specified.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screw and washers, in roofs, walls etc with grade of zinc coating 275 but except material, all as specified.

S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, all as specied.

M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described including preparing new zinc (or galvanised) surface to recieve painting, by coating with modrant solution including washing & cleaning etc and applying two coats of synthetic enamel paint (any tint) over a coat of red oxide primer in CCD pattern as approved, complete all as specified.

M&L for preparation of old surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (any tint), complete all as specified.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, all as specified.

M&L for reinforced cement concrete (nominal mix) type B-1, 1:2:4 (using 20 mm graded stone aggregate), as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, all as specified.

M&L for steel TMT bars 10 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binging with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified.

Form work to sofit of suspended slab such as roof slab, floor slab, landing and similar workn exc 200mm thick flat fair finished surfaces complete all as specified.

Form work to edge of concrete flats exc 5cm but n exc 10cm wide complete all as specified.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, all as specified and directed.

S&F 15 mm bore galvanized steel tubes, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, all as specified and directed.

S&F 20 mm bore galvanized steel tubes, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, all as specified.

M&L for lagging to 20mm dia pipes, all arround with 25mm thick bonded mineral wool pre-formed `SNAP ON` pipe sections of density 144 Kg/cum conforming to IS 9842, provided with chicken mesh wire netting 25 gauge, 20mm mesh, all as specified.

S&F rotational moulded polyethylene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including hoisting, connecting including dismantling existing tank and removing to store, all as specified.

S&F rotational moulded polyethylene water storage tanks of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including hoisting, connecting including dismantling existing tank, all as specified.

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 20mm, all as specified.

Demolition of cement concrete (unreinforced) in ground floor and in paving n exc 15 cm thickness (below or above ground level), complete all as specified.

M&L for 75mm thick cement concrete type D- 2, 1:4:8 (using 40mm graded aggregate) as in sub base to interlocking blocks, complete all as specified.

M&L for sand cushioning for laying interlocking tiles, complete all as specified.

M&L for machine pressed precast concrete rubber moulded interlocking paver blocks any shape and size of any pattern conforming to IS 15658-2006, of 60mm thickness, M-35 grade with grey cement and pigments, complete all as specified.

M&L for 15mm thick screed bed or bedding layer in cement mortar 1:4, for laying chequered tiles, all as specified.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, all as specified.

M&L cement concrete type B1, 1:2:4 (using 20mm graded aggregate), in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, all as directed.

M&L for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded aggregates), as in plinth protection, finished the surface even and smooth without using extra cement, all as specified.

Takaing down carefully copper/aluminium point wiring (light fan,socket or power) complete including fixture and fittings such as switches, ceiling rose, pendants, regulators sockets, light fitting etc, removing materials to store for keeping in safe custody or for taking credit (credit for above item should be made as per condition seperatly) and making good disturbed surfaces of walls floors etc. complete all as specified.

M&L Point wiring with 1.50 Sqmm PVC FRLS wire multistranded copper conductor, 1100 Volts grade, ISI marked, drawn through with and including stove enamelled steel conduit of size 20 mm dia ISI marked of reputed firm as directed including conduit accessories fixed with saddles on wall and terminal box (sunken box of MS/CI) concealed in wall with laminated sheet cover 3 mm thick over the terminal boxes with tin plated screw, washer including 1.50 Sqmm PVC FRLS multistranded copper conductor green code for earth continuity and connection upto earth dolly for One light or Fan point controlled by one switch, single pole, one way complete all as specified and directed by Engineer-in-Charge.

M&L Point wiring with 2.50 Sqmm PVC FRLS wire multistranded copper conductor, 1100 Volts grade, ISI marked, drawn through with and including stove enamelled steel conduit of size 20 mm dia ISI marked of reputed firm as directed including conduit accessories fixed with saddles on wall and terminal box (sunken box of MS/CI) concealed in wall with laminated sheet cover 3 mm thick over the terminal boxes with tin plated screw, washer including 1.50 Sqmm PVC FRLS multistranded copper conductor green code for earth continuity and connection upto earth dolly for 15 Amps switch/socket on independent board complete all as specified and directed by Engineer-in-Charge

M&L Point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, MS box 1.6 mm thick with hylum sheet 3 mm thick (approved colour) suitable for switches, sockets, fan regulator etc for the following :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

One light/fan point controlled by one way switch 6 amps 240 volts

One 3 pin 6 Amps switch socket out let point on independent Board

One 3 pin 6 Amps switch socket out let point on same board

S&F Switch, piano flush type, 250 Volts, single pole, one way 6 Amps, ISI marked complete all as specified and directed by Engineer-in-Charge

S&F in repair socket outlet 2 in 1, 3 pin 5 A flush type ISI marked 240 volts ISI marked etc complete as specified and directed Make- SSK or equivalent approved by GE

S&F Switch socket combination 5 in 1, 6/16 Amps, ISI marked, flush type, 250 Volts, single pole, one way, complete all as specified and directed by Engineer-in-Charge

S&F Ceiling rose 3 terminal PVC/ Polycarbonate, isolated body, ISI marked complete all as specified and directed by Engineer-in-Charge

S&F in repair stepped type fan electronic fan regulator flush type ISI marked on the existing fpenolic laminated sheet etc complete as specified and directed Make- SSK or equivalent appvoed by GE

S&F decorative Self ballasted LED Batten With Extruded Thermoplastic body with PC diffuser fitting with>120º wide Distribution 16 watt luminaire all as specified & approved by EIC.Make:- CG C&S ,Havells ,Crompton equivalent approved by GE

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps C series breaking capcity 10 KA incl flush/surface mounting complete all as specified and directed. Make- Legrand, CG, C&S, Havells, Crompton equivalent approved by GE.

S&F triple pole and earth enclosure with a three pin and earth plug with socket complete coplete with one triple pole MCB 32 Amp C series, 10 KA breaking capacity incl flush/surface mounting complete all as specified and directed. Make Legrand CG C&S, Havells, Crompton equivalent approved by GE

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made 2 way SPN suitable for MCB DB's 240 Volts directed. Make- Legrand, CG, C&S, Havells, Crompton equivalent approved by GE

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 8 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed directed. Make- Legrand, CG, C&S, Havells, Crompton equivalent approved by GE

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 4 way TPN suitable for MCB DB's 415 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed. Make- Legrand, CG, C&S, Havells, Crompton equivalent approved by GE

S&F MCB single pole ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply for incoming and out going controlling circuit of capacity 6-32 Amp breaking capacity 10 KA etc all as specified and directed by Engineer-in-Charge

S&F MCB single pole ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply for incoming and outgoing controlling circuit of capacity 40-63 Amp breaking capacity 10 KA etc all as specified and directed by Engineer-in-Charge

S&F MCB triple pole and neutral ISI marked`C' series working on 240 Volts 50 HZ AC supply for incoming and outgoing controlling circuit of capacity 63 Amp breaking capacity 10 KA etc all as specified and directed.

S&F MCB single pole and neutral ISI marked `C' series working on 240 volts 50HZ AC supply for incoming & out going controlling system of capaicty 40-63 Amps 10 KA breaking capacity etc all as specified and directed by Engineer-in-Charge.

M&L Sub main wiring with two runs of single core of size 6 Sqmm PVC FRLS wire multistranded copper conductor, drawn through drawn through with and including stove enamelled steel conduit of size 20 mm dia ISI marked t with complte accessories with 6.0 Sqmm PVC FRLS wire multistranded copper conductor green code for earth continuity and connecting up with earth dolly with suitble size copper terminals conductor for giving connection complete all as specified and directed by Engineer-in-Charge.

M&L Sub main wiring with Three runs of single core of size 6 Sqmm PVC FRLS wire multistranded copper conductor, drawn through with and including stove enamelled steel conduit of suitable size ISI marked with complte accessories with 6 Sqmm PVC FRLS wire multistranded copper conductor green code for earth continuity and connecting up with earth dolly with suitble size copper terminals conductor for giving connection complete all as specified and directed by Engineer-in-Charge

S&F LT bus bar chamber factory made weather and vermin proof made of 2mm thick MS sheet with 400 Amps rated aluminium bus bar for three phase with MCCB FP 400 Amp, 25 KA, 415 Volts 50 Hz with adjustable thermal and adjustable magnetic setting and provn for incoming and outgoing cables one neutral complete all as directed by Engineer-in-Charge

S&F in repair LED flood light 150 watt IP66 high power flood light with pressure die cast aluminium housing complete with all accessories incl 3 core flexible cable from ceiling rose to connector of fitting etc complete as specified and directed by Engineer-in-Charge. Make:- Wipro Cat. Part No. LF20-192-60-57-G2 or equivalent in Philips/ Crompton

S&F in repair LED flood light 100 watt IP66 high power flood light with pressure die cast aluminium housing complete with all accessories incl 3 core flexible cable from ceiling rose to connector of fitting etc complete as specified and directed by Engineer-in-Charge. Make:- Wipro Cat. Part No. LF20-112-60-57-G2 or equivalent in Philips/ Crompton

S&F LED aviation light fitting 12 watt 230 volts 50 HZ including fixing arrangement on RCC top of ballast incl electrical connection of fitting etc complete as specified and directed by Engineer-in-Charge Make Surya Cat Part No SLE AL 108 LDR SEN IP 65 or equivalent CG/ Philips/ Bajaj.

Supply and fixing copper strip 20 x 3 mm with porcelain insulators, saddles and fixing screws etc for roof conductors and down conductors all as specified and directed.

S&F Air termination single pointed copper rod, not less than12 mm dia and 300 mm long including fixing arrangements all as specified.

S&F LED CMPRI certified LED flameproof 16W tube light fitting recommended for Gas/vapour group of II A & II B and Zone 1&2 with all accessoreis & incl 3 core flexible cable and metalic flexible conduit from ceiling rose to connector of fitting etc complete as specified and directed by Engr-in-charge Make Crompton model No EXTN1LT8-16/20 or equivalent sudhir approved by GE

Supply and fix heavy duty exhuast fan 300mm, 900 rpm turbo force model single phase incl all accessories as per manufacturer norms and unserviceable fan deposited in MES store yard etc complete as specified and directed by EIC Make- havells/ usha/ khetan

Supply and fix ceilling fan 1200 mm sweep with all accessories as per manufacturer norms and unserviceable fan deposited in MES store yard etc complete as specified and directed by EIC Make- Havells /Usha/ Khetan

M/S A.R.TANTARY

M/S TARIQ AHMAD SHEIKH

M/S GULZAR ENTERPRISES

M/S FAROOQ AND SONS

M/S Abdul Ahad Rather

M/S MIR AND CO

M/S ABDUL REHMAN WANI