Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.8 LAccepted-Finance | L1 | Accepted-Finance ok | |
| 2 | Not Admitted-Fee/PreQual/Technical/Finance | - | Not Admitted-Fee/PreQual/Technical/Finance Not qualified for AOC |
Tender Value
₹12.2 L
EMD Value
₹12,180
Closing Date
12 Mar 2024, 3:00 pmClosed
Executive Officer
33, Kulakarai Street Kilpennathur Tiruvannamalai District
RENEWATION OF OHT KILPENNATHUR OHT (2.00Lakhs Lit) KARUNGALIKUPPAM KULAKARAI STREET OHT (1.50Lit )VIVEKANNANDAR STREET OHT (1.00lakhsLit )KILPENNATHUR INDIRA NAGAR (1.00 LAKHS lIT) AMBEDKAR NAGAR (0.60LAKSH LIT) ELATHANPURAVADI (0.30 LAKSH LIT) AND
2024_DTP_446409_1
24/2024
Open Tender
Civil Works - Water Works
Works
90 days
Kilpennathur Town Panchayat Limit
IInd and above
2 documents required · 2 mandatory
₹0
₹12,180
5 Feb 2025
9 Mar 2024
12 Mar 2024
9 Mar 2024
12 Mar 2024
9 Mar 2024
Amount
Providing two legged scaffolding of 1 m wide alround the tank at every 1.5 m ht. including cost and conveyance of all materials and labour charges etc complete as per standard specification.
Kilpennathur Kulakarai Street (2.00 Lakh Litre)
First level @ 2.50M above Gl
Second level @5.00 M above Gl
Third level @ 7.50M above Gl
Karungalikuppam Kulakarai Street (1.50 Lakh Litre) OHT
First level @ 2.50M above Gl
Second level @5.00 M above Gl
Third level @ 7.50M above Gl
Fourth level @ 10.00M above Gl
Vivekanandar Street (1.00 Lakh Litre) OHT
First level @ 2.50M above Gl
Second level @5.00 M above Gl
Third level @ 7.50M above Gl
Fourth level @ 10.00M above Gl
Kilpennathur Indira Nagar (1.00 Lakh Litre) OHT
First level @ 2.50M above Gl
Second level @5.00 M above Gl
Third level @ 7.50M above Gl
Fourth level @ 10.00M above Gl
Ambethar Nagar (0.60 Lakh Litre) OHT
First level @ 2.50M above Gl
Second level @5.00 M above Gl
Third level @ 7.50M above Gl
Fourth level @ 10.00M above Gl
Elathanpuravadi (0.30 Lakh Litre) OHT
First level @ 2.50M above Gl
Second level @5.00 M above Gl
Third level @ 7.50M above Gl
Fourth level @ 10.00M above Gl
Kottavur (0.10 Lakh Litre) OHT
First level @ 2.50M above Gl
Second level @5.00 M above Gl
Third level @ 7.50M above Gl
Fourth level @ 10.00M above Gl
Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm
Fabrication, supply, delivery and fixing of outside MS Ladder of 45cm clear wide made out of 50 mm x 50mm x 6mm MS angle for both sides and for steps at 30cm C/C welded jointed etc ., for I staging from GL to 1st level brace (weight 4.5kg/m) IInd and IIIrd staging upto floor slab and IVth staging from floor slab to roof top. Supply, delivery and fixing of 32 mm GI pipes medium for hand rails from I stage to IVth stage. RCC M30 Grade mix for Landing slab 5 nos. at Ground Level- 1No. and above Ground Level - 4Nos. Supply and fixing of 32mm GI pipe medium for hand rails for the Landing slab. Supplying and fixing of MS Base plate of 100mm X 100mm X 6mm thick for fixing Anchore fastener bolt for fixing of hand rails at Landing slab and MS Ladder providing locking arrangements with two coats of approved enamel paint over one coat of red oxide paint as per approved Type Design and as directed by Department officers.page 90
Plastering with cement mortar 1 : 3 mix, 10mm thick including cost and conveyance of all materials from approved quarry and all other labour charges etc., completed as per standard specification.
Supplying and Delivery of 80 mm dia GI PIPE (Medium) AS PER IS 1239/ Part I / 2004 includind all cost of materials and other charges etc complete complying with standard Specifications
Lowering 80 mm dia GI PIPE (Medium) and specials in the trenches and laying to proper grade and alignment and as directed by the Department Officers.page 259
Supply and Delivery of DI D/F Gate Valves (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade GGG40, wedge fullyrubber lined with EPDM, replaceable spindle nut, without gland packing and with 3 O-Ring protection on the shaft and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimentions as EPR BS 5163-89/ ISI 14846-2000/ DIN 3202 F 4. All the valves should be with electrostatic powder coating both inside and outside with pocket less All lthe valves are to be compatible for burried application with pressure rating PN 10/16.
80 mm dia gate valve
100 mm dia gate valve
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_531602.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .