REPAIRS TO WALL AND FLOOR TILES, SANITARY FITTINGS, OHT, PIPE LINE, KITCHEN SLAB, FALSE CEILING, EXTERNAL AND INTERNAL PAINTING AND OTHER CONNECTED WORKS AT CE RND OFFICE RESIDENTIAL AREA AND DMDE OFFICE RESIDENTIAL AREAS

S&F in repairs vitreous china wash basin, white, flat back, size 550 x 400 mm incl 32 mm dia CP Brass waste coupling incl brackets complete all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) (EWC), white including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and fixing bolts complete all as specified.

S&F in repairs vitreous china squatting pan "orissa" pattern of size 580x440mm white with integral foot rest including provision of P or S trap including connection to flushing pipe and making good to floor complete all as specified. Note :- Demolition of tiles/concrete requested and concreting required for setting trap and making good to floor shall be deemed to included in the quoted rate

S&F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as directed. ISI marked

S&F in repairs brass chromium plated tubular towel rail 20mm dia, D type, 600 mm long between flanges complete all as directed. ISI marked

M&L for false ceiling with light weight 19mm thick mineral Armstrong tiles of size 595x595mm suspended on silhouette profile suspension system of grid made from hot dipped GI steel section notary stitched double webbed powder coated white consisting of main T-runner 42mmx14mm and 0.30mm thick and cross T of size 33mmx14mm and 0.30mm thick placed at 60cm centre having width of flange 14mm with a 6mm reveal profile (Blace). The grid system to be rested on the periphery wall / partitions on a W- Profile wall section made of Pre-coated galvanized steel of dimension 3.0mm long x (15mm +10mm)x22.5mm and laying false ceiling for services like diffusers grill including cutting, making opening for services like diffusers grill light fitting, fixture smoke detectors etc. Wherever required main T-runner to be suspended from ceiling using GI Suffix cleats of size 25mm x 35mm x 1.6mm fixed to ceiling with 6mm dia GI hangers and 50mm long dash fastener, 4mm dia GI adjustable rods with galvanized level adjustment clips spaced as required, complete all as directed.

S&F in repairs GI snap grid frame work for false ceiling grid size 605 x 605mm suspended with 4mm dia GI wire ( upto 1200mm length) ajustable level fixed to roof slabs by means of ceiling cleats made out of GI flat complete

S&F 12mm thick Gypsum board to false ceiling grid with screw or suitable clips including applying two coats of acrylic emulsion over a coat of primer complete

M&L for providing and fixing Plaster of Paris false ceilings with light weight 19 mm thick Gypsum Board False Ceiling straight or curve any profile grid made from hot dipped GI steel section notary stitched double webbed power coated white consisting of main T- runner 42mmx14mm and 0.30mm thick and cross T of size 33mmx 14mm and 0.30mm thick placed at 60cm centre having width of flange 14mm with a 6mm reveal profile (Blace). The grid system to be rested on the periphery wall/partitions on a W-profile wall section made of pre-coated galvanized steel of dimension 3.0mm long x (15mm+10mm) x22.5mm and laying false ceiling for services like diffusers grill including cutting, making opening for services like diffusers grill light fitting, fixture smoke detectors etc. Wherever required main T-runner to be suspended from ceiling using GI suffix cleats of size 25mm x 35mm x 1.6mm fixed to ceiling with 6mm dia and 50mm long dash fastener, 4mm dia GI adjustable rods with galvanized level adjustment clips spaced as required, all complete at all height as per specification, drawing and as per direction of Engr in Charge and Including dismantliling of existing false celing at any specification and any height..

S&F in repair rectangular aluminium hollow section, powder coated of approved colour not less than 50 micron thickness, of size 101.60 mm x 44 mm x 2 mm thick as in partition including fixing with suitable size of nuts, bolts in floors and walls by drilling holes, both vertical and horizontal members including provision of sheet glass 5.5 mm thick and 12 mm thick particle board prelaminated on both side with decorative choice lamination, 25 micron sun control film, aliminium legs, aluminium galzing channel,beading, complete all as specified and directed.