Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹43.7 L
EMD Value
₹87,360
Closing Date
10 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE (AF) ADAMPUR
GE (AF) ADAMPUR
PROVN OF CFT MANOUVERING AREA ALONGWITH B/R AND E/M WORK SERVICES AT 8 WG AT AF STN ADAMPUR
2026_MES_799265_1
GE(AF)/ADM/T-56 OF 2026-27
Open Tender
Civil Works
Item Rate
180 days
Under GE (AF) ADAMPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) ADAMPUR
₹87,360
Yes
18 Nov 2026
18 Nov 2026
12 Dec 2026
18 Nov 2026
10 Dec 2026
3 Dec 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation over areas, n exc 1.5 m deep and getting out in soft and loose soil complete all as specified and as directed. | 382.2 | Cum | 100 | ₹38,220 |
| 2 | Rough excavation not exceeding 1.5 m deep and getting out in soft soil complete all as specified and as directed. | 122.4 | Cum | 100 | ₹12,240 |
| 3 | Rolling and consolidation formation surfaces in cutting by power roller exc 8 tonne & not exc 12 tonne complete all as specified and directed. | 95.55 | Per 10 Sqm | 100 | ₹9,555 |
| 4 | M&L for Laying and compacting 200 mm thick (in two layers each having 100 mm compacted thickness) Granular Sub Base Course (GSB) grading as per Grade V as specified Table 400-1 of MoRTH specifications for Road and Bridge works, 2013, over compacted subgrade with natural sand, crushed gravel, crushed stone, crushed slag or combination thereof as per the grading required The materials are mechanically mixed, spread and leveling on the subgrade by using motor grader of adequate capacity, and rolling with vibratory roller of capacity 80-1 00 KN static weight for achieving required compaction density of atleast 98% of the Maximum Dry Density. Consolidating to required gradient and camber complete all as specified and directed with finished surface tolerances as per Table 900-1 of MoRTH specifications for Road and Bridge works, 2013. complete all as specified and as directed. | 95.55 | Per 10 Sqm | 100 | ₹9,555 |
| 5 | M&L for Providing and Laying Dry lean Concrete (DLC) 100 mm thick of aggregate gradation as per Table 1 of SP 49:2014 having 7 day average compressive strength not less than 7 MPa Minimum cement content not less than 140 Kg/Cum DLC mixed in Batching Plant, transported to site and laid by electronic sensor paver including spreading and compacting usign high amplitude tamping bars or paver (initial compaction) further by double drum smooth wheeled vibratory rollers with 80-100 KN static weight to achieve minimum dry density not less than 98% of maximum Dry Density, necessary finishing etc complete all as specified and tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge work 2013 complete all as specified and as directed. | 95.55 | Per 10 Sqm | 100 | ₹9,555 |
| 6 | M&L for 10 mm thick sand cushion with clean river sand duly clear of residual , organic and deleterious materials spread evenly to uniform thickness laid over DLC layercomplete all as specified and as directed.
(No additional amount to be paid for overlap) | 9.56 | Cum | 100 | ₹956 |
| 7 | Supplying and laying 400 micron thick HDPE sheet (Virgin Quality) water proof, wrinkle free without puncture having minimum weight 390 gm/Sqm over tack coat / sand cushion as specified in the design with overlap between adjacent strips and at transverse joints as minimum 300mm.complete all as specified and as directed. | 955.5 | Sqm | 10 | ₹9,555 |
| 8 | M&L 225 mm thick Pavement quality concrete (PQC) of minimum 28 days field Flexural strength of 45Kg/ Sqcm or 4.5 Mpa, aggregate gradation as per Table 3 of IRC 15 2017, coarse aggregate of clean , hard strong, dense non-porous and durable pieces of crushed stone o gravel, fine aggregates of clean natural sand of crushed stone sand or combination of both using minimum 360 kg/cum of cement with non -circular virgin synthetic fibre of 12-18 mm length, specific gravity 1.34 to 1.39, UV stable, alkali resistant, with equivalent dia 15-40 micron, minimum melting temperature as 240°C and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacturer. PQC laid, spread and compacted with slip-form paver of minimum 7.50 m width , including curing and tining by Texturing cum Curing Machine complete all as specified and directed. Required surface texturing to be done as specified in Clause -10 1 14 and Tabl~ 9 of IRC' 15-2017 complete all as specified and as directed. | 214.99 | Cum | 10 | ₹2,149.9 |
| 9 | Forming 25 mm width expansion joint in concrete slab for full depth of POC. Early entry saw and subsequent cutting by using diamond bit cutter appropriate size. straight and smooth edges. Join cleaned thoroughly with application of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris. The join then filled with pre-molded 25 mm thick compressible polyethylene closed cell type filler board as specified thereafter application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before placing the backup rod and pouring the sealant Placing of closed cell medium density, crossed linked polyethylene foam backup rod of 30 mm dia, over filler board and filled with polyurethane based sealant complying with BS 5212, BS 4254 and EN-141875-2003 with minimum movement accommodation factor (MAF) of+/- 30% having minimum 10 year performance guarantee
applying masked tape on the edges of joints and removing the masking tape after filling of sealant as per the method specified by the manufacture complete as specified and directed. | 10 | XRM | 10 | ₹100 |
| 10 | Cutting of construction joints 225 mm deep and 10 mm wide by early entry saw cut using diamond bit cutter of appropriate size, straight and smooth edges. Joint cleaned thoroughly with application of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and othe debris Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before placing the backup rod and pouring the sealant. Placing of closed cell medium density, crossed linked polyethylene foam backup rod of 12 mm dia, application of bond breake tape on top of back up rod for complete width of the joint and filled with polyurethane based sealan complying with BS-5212, BS 4254 and EN- 141875 2003 with minimum movement accommodation factor (MAF) of +I- 30% having minimum 10 year performance guarantee, applying masked tape on the edges of joints and removing the masking tape after filling of sealant as per the method specified by the manufacturer complete as specified and directed | 1 | XRM | 100 | ₹100 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
BOQ_896731.xls
BOQ • 1.81 MB
tender56.pdf
Tender Documents • 0.96 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .