Recovery and Restoration work on Kashdhar Darkali road Km. 0.000 to 22.700

Excavation in Hill area by manual/mechanical means:- Excavation in soil in hill areas all heights and depth in all kind of soil including saturated soil comprising of mixed soil, ordinary rock and hardd rock all work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side, water pollution etc. and to protect stability of hill side. Rock shall be excavated with chiselling and wedging out rock( where blasting is prohibited) including cutting and trimming of side slopes and disposing of excavated earth with a lift upto all heights and all leads as directed by the Engineer-in-Charge, in conformately with the requirement of technical specification of rural roads clause 1603.1 all useful material such as stone, shingle, aggregates& slate etc. shall be sorted out and stacked along the road side properly. Any loss to the public and private property to during the course of execution shall be the absoulte responsibility of the contractor which shall have to be duly compensated by him in all cases.

Earth work in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto all leads , dressing of sides and bottom and back filling in trenches with excavated suitable material in ordinary soil upto all depth. as directed by the Engineer-in-Charge.all useful material such as stone, shingle, aggregates& slate etc. shall be sorted out and stacked along the road side properly. Any loss to the public and private property to during the course of execution shall be the absoulte responsibility of the contractor which shall have to be duly compensated by him in all cases.

Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 agregate stone 40mm nominal size) including the cost of form work for plain/ reinforced concrete in retaining walls, breast walls, the size of plum should be 150 to 300 mm. as per drawing and H.P.P.W.D. technical specifications. including the cost of form work and hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and laying cement concrete 1:4:8 (1 cement : 4 sand :8 Graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in breast and retaining walls etc. including carriage of material within all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and laying in position cement concrete ofspecified grade excluding the cost of centering and shuttering 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) including carriage of material within all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Centering and shuttering including strutting, propping etc. and removal of from for foundation, footing, bases of columns, etc. for mass concrete including hauling of material in all leads and lfits as per PWD specifications and as per direction of Engineer- in Charge.

Providing and laying reinforced cement concrete 1:1.5:3 ( 1 Cement: 1.5 sand: 3 graded stone aggregate 20mm nominal size compacting the concrete with mechanical mixure and vibrator and curing complete excluding cost of orm work and reinforcement for reinforce concrete work in: including carriage of materials through all modes of transportation with in all leads and lifts and as per HP PWD specification of 1990 volume-1 and as per direction of Engineer in Charges suspended floor roos, landing and sheleves and their supports balconies beams, girders, bressumers and contilever in super structure for all floor and all level

Steel reinforcement for RCC work including strainghtening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mchanically Treated bars of grade Fe-500D or more including hauling of material in all leads and lifts as per entire satisfaction and direction of Engineer-in-charge.

Providing 100mm diameter poly Vinyl chloride pipe weep holes in brick/ stone / plain reinforced concrete abutment, wing wall, return walls with 100 mm dia PVC pipe extending through the full width of the structure with slope of 1V : 20H towards drawing face complete as per drawing and technical specifications clauses 614, 709 and 1204.3.7 including carriage of material within all leads and lifts and other incidentals. including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Backfilling behind abutment, wing wall and return wall complete as per drawings and technical specification clause 1204.3.8 with granular material including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.