REPAIR AND MAINTENANCE OF MISC STEEL/WOODEN FURNITURE AT COD CHHEOKI

Amount

A) Removal of following existing unserviceable components of various MES F/DB/FD/TP/MAP/TP furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, weldging, glueing, providing hinges,denting, placing everypart in-tact , as applicable as per drgs B) Work will be executed where the furniture exist in different User Units of GE (West) Allahabad including BSO Furniture Yard Alld as directed by Engineer-in-Charge

Table Office Clerk Steel :FD-84 / 381 FD-1004

a) Legs, as per drg

b) S/S Lock of drawer as per drg (Make- Godrej/Harrison/Ebco/MYdas)

c) Repairs to Drawer/shutter by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg.

d) Stiffeners as per drg

e) PVC Shoes std quality all as per drg

f) Welding the joints of legs / square tube as per drg

g) Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Make: Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate(Make- Action tesa/greenply/century) in colour/shade as approved by EIC/GE and balancing white sheet with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Almirah Large Steel :FD-67 / 1031/ TP/MAP

a) S/S 6 lever locks (Make-Godrej/Harrison/Mydas) as per drg

b) CP Handle as per drg

c) Legs as per drg

d) Repairs to door as specified including replacement of hinges

e) Repair/adjustment to existing shelf including welding as per drg

f) Shutter as per drg.

g) Shelf as per drg

Almirah Medium / Small Steel : FD-1032/FD-104(m)

a) Brass/Steel 6 lever locks (Make-Godrej/Link/mydas) as per drg

b) CP Handle as per drg

c) Legs as per drg

d) Repairs to door as specified including replacement of hinges

e) Repair/adjustment to existing shelf including welding as per drg

f) Shutter as per drg.

g) Shelf as per drg

Teapoy Verandah :FD-383/255

a) Rubber shoe std quality as per drg

b) Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Make: Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate(Make- Action tesa/greenply/century) in colour/shade as approved by EIC/GE and balancing white sheet with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

c) Flat iron/conduit section any member as per drg.

Table 3x2 with and w/o drawer: FD-1008/1007/1009

a) Welding wherever required as directed by E-in-Incharge

b) Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Make: Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate(Make- Action tesa/greenply/century) in colour/shade as approved by EIC/GE and balancing top with white sheet with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

c) Repairs to Drawer by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg.

d) Rubber shoe std quality as per drg

e) SS Lock of drawer as per drg (make-Harrison/Ebco/Godrej/mydas)

Chair Steel Tubular with & without arms: FD-75(m)

a) Second class Hard wood seat frame including cane work with two coats synthetic enameled paint over a coat primer and putty fitting in position all as per drg

b) Second class Hard wood back frame including cane work with two coats synthetic enameled paint over a coat primer and putty fitting in position all as per drg

c) PVC Arm rest as directed by EIC

d) Hard rubber shoes as per drg

e) Rubber cap for conduit pipe as per drg

f) Welding wherever required as directed by E-in-Incharge

Chair Verandah : FD-19, FD-256, FD-359/MAP/11/MAP-II/15

a) Conduit section any member of MS conduit pipe 16G, 19mm dia as per drg.

b) Welding joints of leg of 19/20mm MS tube & other joints as per drg as directed by EIC

c) Hard rubber shoes as per drg

d) Removing of old paint complete by scrapping,preparing surface smooth and Painting to the entire frame including removing old unserviceable cane from chair verandah & recaning the chairs etc with approved new plastic cane 4 mm wide half round as per Matt Pattern all as specified(colour of cane shall approved by EIC/GE)

Locker Steel : FD-1029/257

(a) CP handels as per drg

(b) S/S Hasp & Staple , rest as per drg

(c) Repairs to door/sides including replacement of hinges

d) Shutter/door as per drg.

(e) Legs as per drg

(f) CP Conduit pipe as per drg

g) Shelf as per drg.

h) S/S 6 lever locks (Make-Godrej/Harrison/mydas) as per drg.

Charpoy IP Ply Top/Bed Hard: MAP

a) 12 mm thick plywood top BWP grade (Make-Century ply/Greenply/Archidply) as per existing shape and size with 8 Nos shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed.

b) S& F 18 mm thick prelaminated MDF board ext grade Head rest & foot rest with PVC beading complete rest all as per drg and as directed by EIC

c) Hard rubber shoe std quality as per drg

Charpoy GI pipe ply top : FD-220

a) 12 mm thick plywood top BWP grade (Make-Century ply/Greenply/Archidply) as per existing shape and size with 10 Nos shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed

b) 25mm mild steel square tube 20 cm long not less than 16 gauge thick each welded to GI Charpoy pipe in four corner to support. Duly painted complete all as specified and directed.

c) S&F stiffener in replacement of 25 mm mild steel square tube 80 cm long not less than 16 Gauge in thickness each welded to GI Charpoy pipe complete all as specified and directed.

d) S&F in replacemet of long rail of 32 mm dia Medium grade GI pipes ISI Marked all as specified and shown on drg Make of pipe Jindal/Prakash/VPL complete all as specified and directed.

e) Replacement of unserviceable short rail from charpoy GI pipe 32mm bore but "except pipe" including cutting threading etc as required and directed. Note : Pipe shall be used from unserviceable long rail obtained from item No 18 (d) here in before.

f) Replacement of unservicable legs from charpoy GI pipe 32mm dia but except pipe including cutting threading etc as required and directed with bottom plug made of Sal wood and flat iron clamp 02 Nos for MNF set duly painted with two coats of black paint complete all as specified and directed. Note : Pipe obtained from ser item No 18 (d) & (e) above shall be used for this items.

g) S&F in replacement of GI 3 way elbow 32 mm dia complete all as specified and directed.

h) S&F in replacement of 32mm check nuts complete all as specified and directed.

j) Welding work wherever required as directed by EIC

A) M&L for painting two coat of synthetic enamel paint with shade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally to the following furniture articles, all are of MES pattern viz F/FD/DB/MAP series or Similar items including removing of dust, dirts,dents etc and removing of existing paint both internally & externally , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge. B) Work will be executed where the furniture exist in different User Units/Md accns of GE(East) Allahabad including BSO's Furniture Yard as directed by Engineer-in-Charge

Almirah Steel Medium/Small : FD-1032

Almirah Steel Large: FD-67/351, 1031,

Charpoy IP Hard Top/Bed hard :MAP

Chair Steel Tubular with and w/o arms :FD-75(m)

Chair Verandah :MAP

Locker Steel: FD-1029/257/127

Table office officer steel :FD-1003

Table Clk steel: FD-1004

Teapoy Varandah: FD-383

Table 3x2 with and w/o drawer : FD-1007/1008

Charpoy GI pipe :FD-388®

A) Removal of following existing unserviceable wooden components of various MES F/DB/FD/MAP furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing everypart in-tact the disturbed portion, as applicable as per drgs and as directed by EIC. B) Work will be executed where the furniture exist in different User Units of GE(West) Allahabad including BSO's Furniture Yard as directed by Engineer-in-Charge. C) Timber shall be of 2st class teak wood seasoned.

Table 3'X3' & 3'X2' with / without Drawer :FD-55/284/283 or simillar

a) Top of size 940mm X640mm made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate(make-Archidply/Greenply/century) in colour/shade as approved by EIC/GE and balancing white sheet with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

b) All as per Item 2 (a) but size 940mmx940mm as per drg.

c) Legs as per drg

d) Top long rail as per drg

e) Top Short rail as per drg

f) Center Stiffener as directed by EIC

g) Short stiffener as per drg

h) Drawer made of 18 mm thick pre laminated MDF board Exterior grade of shade as approved by EIC/GE with 2 mm thick PVC edging in front & sides and bottom of drawer shall be 9 mm thick BWP Plywood (Make-Century ply/Greenply/Archidply) complete with telescopic channel (make -Ebco/Ozone/Hettich) complete . Rest all as per drg.

j) S/S handle as per sample held in yard.

k) MS right angle /corner shall be provided to each legs as per sample rest all as directed by EIC/GE.

l) shoe as per sample

Table Dining 6/4 Persons :FD-273, 30 or similar type/MAP Drg

a) Top of size 1550mm X950mm made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate(make-Archidply/Greenply/century) in colour/shade as approved by EIC/GE and balancing white sheet with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

b) Top of size 1250mm X950mm made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate(make-Archidply/Greenply/century) in colour/shade as approved by EIC/GE and balancing white sheet with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

c) MS right angle /corner shall be provided to each legs as per sample rest all as directed by EIC/GE.

d) Top long rail as per drg

e) Top short rail as per drg

f) Legs as per drg

g) Shoe as per sample

Table writing: FD-33,275, DB-3982 or similar type

a) Top of size 1200mm X640mm made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate(make-Archidply/Greenply/century) in colour/shade as approved by EIC/GE and balancing white sheet with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

b) MS right angle /corner shall be provided to each legs as per sample rest all as directed by EIC/GE.

c) Legs as per drg

d) Foot rest as per drg

e) Stiffener side as per drg

f) complete cabinet body except drawer /shutter with 18 mm thick pre laminated MDF board Exterior grade of shade as approved by EIC/GE all as per drg and specified.

g) Back ply BWP grade as per drg.

h) Drawer made of 18 mm thick pre laminated MDF board Exterior grade of shade as approved by EIC/GE with 2 mm thick PVC edging in front & sides and bottom of drawer shall be 9 mm thick BWP Plywood (Make-Century ply/Greenply/Archidply) complete with telescopic channel (make -Ebco/Ozone/Hettich) complete . Rest all as per drg.

j)S/S handle as per sample

k) 18 mm thick pre laminated MDF board Exterior grade of shade as approved by EIC/GE for Cabinet door along with magnetic catcher (make-Harrison/ebco) complete rest all as per drg and as directed by EIC.

Table Dressing Ladies : FD-32,251, DB-3180/MAP Drg

a) Mirror 5mm thick (Make-Modiguard/Atul/Saintgobbain) & 6 mm thick Back ply BWP grade (Make: Century Ply/ Greenply/ Archidply) as per drg.

b) Frame for mirror assembly, complete as per drg

c) Drawer made of 18 mm thick pre laminated MDF board Exterior grade of shade as approved by EIC/GE with 2 mm thick PVC edging in front & sides and bottom of drawer shall be 9 mm thick BWP Plywood (Make-Century ply/Greenply/Archidply) complete with telescopic channel (make -Ebco/Ozone/Hettich) complete . Rest all as per drg.

d) Plain glass with alu runner as per drg.

e) Fancy knob CP as per sample.

f) 12 mm thick back ply BWP grade of table dressing box as per drg.

g) Repair of Stool dressing and S&F PU foam cushion with 40 Density (Make:Sleepwell (Cool Gel-S)/ Godrej) with Tapestry cloth as approved by EIC/GE of rate not less than Rs 450/RM complete as per Drg and as directed by EIC.

Table Dressing Gents: FD-230

a) Mirror 5mm thick (Make-Modiguard/Atul/Saintgobbain) & 6 mm thick Back ply BWP grade (Make: Century Ply/ Greenply/ Archidply) as per drg.

b) Frame for mirror assembly, completet as per drg.

c) Drawer made of 18 mm thick pre laminated MDF board Exterior grade of shade as approved by EIC/GE with 2 mm thick PVC edging in front, sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood (Make-Century ply/Greenply/Archidply) complete. Rest all as per drg

d) Sides/top/bottom shall be made of 18 mm thick pre laminated MDF board Exterior grade of shade as approved by EIC/GE all as per drg.

e) 6 mm thick back ply BWP grade of table dressing box as per drg.

Peg Table :FD-277/ 384, DB-3973

a) Top of size 500mm X350mm made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate(make-Archidply/Greenply/century) in colour/shade as approved by EIC/GE and balancing white sheet with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

b) Legs as per drg

c) Top Short shall be provided as per shape & size of long rail complete as directed by EIC

d) Center stiffener shall be provided as per shape & size of sides stiffner as directed by EIC.

e) MS right angle /corner shall be provided to each legs as per sample rest all as directed by EIC/GE.

f) shoe as per sample

Table Centre: FD-274 / 235

a) Top of size 950mm X500mm made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate(make-Archidply/Greenply/century) in colour/shade as approved by EIC/GE and balancing white sheet with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

b) Legs with shoe as per drg

c) Top Short shall be provided as per shape & size of long rail complete as directed by EIC

d) Center stiffener shall be provided as per shape & size of sides stiffner as directed by EIC.

e) MS right angle /corner shall be provided to each legs as per sample rest all as directed by EIC/GE.

Teapoy :FD-278, 34, 382

a) Top of size 650mm X500mm made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate(make-Archidply/Greenply/century) in colour/shade as approved by EIC/GE and balancing white sheet with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

b) Center Stiffener as per bottom rail shape irrespective of what is shown on drg complete as directed by EIC

c) Legs as per drg

d) MS corners to be provided all as directed by EIC/GE.

e) shoe as per sample

Bed Ply top :FD-246/247

a) Teak face ply 3.5 mm thick on head rest/foot rest (Make- Greenply/Century Ply/Archid Ply), with half round Tw beading complete as per drg

b) long rail as per drg

c) Ply top 12 mm thick BWP Grade (Make- Greenply/Century Ply/Archid Ply) rest all as per drg.

d) Head rest complete as per drg

e) Foot rest complete as per drg

f) Stiffner as per drg

g) MS FI corner shall be provided to each legs as per sample & as directed by EIC/GE.

Sofa set 4/5 seater :FD-281/373/MAP drg

a) legs/side rails as drg

b) arms as per drg

c) front rails as per drg

d) Bearer/Batten as drg

e) shoe as per sample

f) back frame top/bottom/sides as per drg

g) Cushion complete as per shape and size ref in drg with 40 dennsity PU foam of size 22”X21”X4" (Make:Sleepwell, Product-Primo cool/ Godrej) with upholstery of tapestry cloth of range not less than Rs. 450/mtr (make-as per sample) colur and shade & quality and providing a chain best quality (at either of 21" side) of make -YKK as approved by EIC/GE.

Chairs Dining :FD-279/16/250

a) Rear legs as per drg

b) Front Leg as per drg

c) Seating Frame members front, back sides as per drg

d) Bottom/Centre stiffener as per drg

e) MS right angle /corner shall be provided to each legs as per sample rest all as directed by EIC/GE.

f) Back strip as per drg

g) M & L for Re-canning of Chair Dining in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete all as shown on drawing including s& f pvc shoe to each legs complete and as directed by the Eng - in - Charge.

Chairs Dining Officers: FD/MAP-II/04/FD/MAP-II/10

a) Rear legs as per drg

b) Front Leg as per drg

c) Seating Frame members front, back sides as per drg

d) Bottom/Centre stiffener as per drg

e) Back strip as per drg

f) Replacement of us plywood for seat with new one 12mm thick Plywood BWP and fixing PU foam cushion with 40 Density (Make:Sleepwell (Primo cool)/ Godrej) with Raxine cloth as approved by EIC/GE of rate not less than Rs 250/RM complete as per Drg and as directed by EIC.

Chair Writing: FD-20,202,250,280

a) Rear legs as per drg

b) Front Leg as per drg

c) Seating Frame members front, back sides as per drg

d) Bottom/Centre stiffener as per drg

e) Arm rest as per drg

f) Back strip as per drg

g) Re-canning : -Ditto- All as per item No 46 (f) above but Chair Writing

Chair Easy :FD-229/ 201/17

a) Rear legs as per drg.

b) Front Leg as per drg.

c) Seating/back Frame members front, back,side rail as per drg.

d) Arm rest as per drg.

e) Re-canning Seat : -Ditto- All as per item No 46 (f) above but Chair Easy

f) Re-canning Back : -Ditto- All as per item No 46 (f) above but Chair Easy

Table Office Clerk :DB-4120

a) Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

b) Repair of drawers with replacement of u/s parts as per drg including fixing S/S handls as per sample all as directed by EIC/GE.

c) Repair of Cabinet box with replacement of u/s parts as per drg S/S handles as per sample all as directed by EIC/GE.

A) M&L for melamine polishing with spray machine after removing of existing polish and smothening of surface wherever required or as directed by EIC to the following furniture articles all are of MES pattern viz F/DB/FD/MAP series or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and shown on drgs and as directed by Engineer-in-Charge. B) Work will be executed where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of GE (West) Allahabad including BSO's Furniture Yard as directed by Engineer-in-Charge.

Almirah Medium/large All Types: DB-3951/4042/ 4047

Bed Plywood Top: FD-246/247

Chair Dining :FD-279/16/ 250

Chair Dining Officers: FD/MAP-II/04/FD/MAP-II/10

Chair Writing :FFD-20,202,250,280

Chair easy: FD-229/ 201/17

Peg table : FD-230/284/277 /DB-3972

Sofa Set 5 seater : FD-258/281 /373

Table dining 6/4 pers :FD-30/239 /273/ 139/289

Table 900x600mm with & without Drawer/ Table 900x900 / Table 600X600 :FD-42/55/41/223 /224/231/284/283/291/293

Table centre: FD-235/274 DB-3973

Table dressing gents :FD-230

Table dressing ladies :FD-251

Table wrtiting :FD-275/DB-3982

Table office officers /clk :FD/DB

Teapoy :DB-4069/FD-232/278/34

gangotri enteriprises

M S Enterprises

Bharat Trading Company

Mohit Enterprises

Supreme Builders