REPAIRS TO SEWAGE LINE, SEPTIC TANK, CLEANING OF SEWAGE LINE, MANHOLES, SEPTIC TANK AND MISC PETTY REPAIRS WORK AT NSRY, NAVCC, CDU, MES COLONY AND VIJAY BAUGH UNDER AGE B/R-II AT GE HADDO, PORT BLAIR

Amount

Demolition of cement concrete in ground floors and pavings etc n.exc 15cm thick above or below GL complete all as specified and directed.

M&L PCC 1:4:8 type D2 using 40 mm aggregate as in lean concrete and foundation, filling and mass bed concrete complete all as specified and directed

M&L for PCC (1:3:6) type C-1 (20 mm graded aggregate) 75mm thick as in plinth protection, plinth courses, parapets, sills, steps, sesmis and other similar bands complete all as specified and directed by Engr-In-Charge.

Dismantling 75mm/100mm/110mm/150mm/160mm internal dia cast iron/ PVC drain or vent pipe jointed in cement mortar laid in trenches or in any position including bends, brand pieces etc. complete all as specified and directed

S&F PVC (SWR) (type"B") pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls including fitting with PVC Clamp as per manufacture's instructions.

S&F PVC (SWR) (type"B") pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls including fitting with PVC Clamp as per manufacture's instructions.

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and directed

S&F for 75mm dia PVC (SWR) grade bends of any radius complete all as specified and directed

Supply only PVC (SWR) bends 110mm bore any radius provided with access door complete all as specified and directed.

Supply only PVC (SWR) bends 75mm bore any radius provided with access door complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) junction (single T) equal or unequal complete all as specified and directed

S&F in repairs 75mm bore PVC (SWR) junction (single T) equal or unequal complete all as specified and directed

S&F in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and directed

S&F in repairs 75mm bore PVC (SWR) vent cowl complete all as specified and directed

M&L for loose filling with broken stone or boulders / aggregates of gauge 40mm to 80mm in soakage pits etc. complete all as specified and directed

S&F in repairs PVC (SWR) floor trap 100mm dia with grating including joining with solvent cement.

Taking down cement plaster on brick/stone masonry wall incl raking out joints, hacking for key, scrubbing down with water etc.

M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 including mixing water proofing compound on concrete/block masonry surfaces and finished even and smooth without using extra cement all as specified.

M&L for preparation of newly plastered wall surfaces and applying two coat of oil bound distemper over one coat of primer including levelling the surface which undulation found with cement putty etc complete all as specified and directed.

M&L for preparation on newly plastered external wall surface and applying two coats of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed. Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard).

M&L for preparation of old surfaces of walls and applying one coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property including filling of cracks, holes and including leveling the surfaces which undulation found with cement putty etc. all as specified.

M&L for preparing old plastered surfaces of wall and applying one coat of oil bound distemper including filling of cracks, holes etc. with cement putty all as specified.

Taking down chowkhats or frames with shutters without taking off shutters from frame n.exc 1.5 Sqm each complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification complete all as specified and as directed.

S&F Factory made solid PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as per specification.

S&F Aluminum anodized barrel bolt of extruded section 150mm long complete

S&F extruded aluminum alloy handle fabricated type anodized 150mm long complete

S&F 100 mm long butt hinges, extruded aluminum alloy with galvanized mild steel hinge pin, anodized, type B-21 complete

S&F in repairs aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed

Dismantling of ceiling boarding including grid of any description fixed in any position with nails complete all as specified and as directed.

S&F for anodized aluminum snap grid frame work for false ceiling incl hangers 6 mm dia, GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long complete all as specified and as directed.

M&L for 4 mm thick non asbestos fiber cement building design board of size 605 x 605 mm fixed or laid to aluminum form work with screws and including preparation of surface and painting with two coat of oil bound distemper complete all as specified and as directed.

M&L 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including Rounding, grinding and mirror polishing complete. (Note : Colour of granite shall be as approved by Engr-In-Charge)

S&F in repairs aluminum (extruded section) body, door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to1000 mm width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

S& F in repairs 20mm to 25 mm dia, Harrison rails, powder coated anodized aluminium alloy with fancy type fixing curtain brackets, stops, rollers etc

S&F in repairs Vitreous china wash down water closet (Pedestal pattern), white in colour includng fixing bolts, connection to drain and to flushing pipe with low level PVC valve less symphonic action type flushing cistern of 10ltrs capacity white in colour with inlet, ball valve float and PVC flush pipe 32mm dia with white seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or hinging device complete all as specified. (Make :- Neycer/Parryware/Cera/Prayag)

S&F in repairs vitreous chine squating pan "Orissa Pattern" water closet of size 580x440mm with integral footrest of 'P' or 'S' trap including provn of lime concrete bedding including connections to flushing pipe with low level PVC valve less symphonic action type flushing cistern of 10ltrs capacity white in colour with inlet, ball valve float and PVC flush pipe 32mm dia with white seat covermaking good disturbed portion to match existing surface complete all as specified and as directed. (Make :- Neycer/Parryware/Cera/Prayag)

S&F in repairs for vitreous China bowl urinal flat back, of size 465x355x265 mm white (minimum) with grating and union for discharge pipe including providing and fixing plugs, butting urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement with and including 32mm dia waste pipe in low density polyethylene (LDPE) of pressure rating 6 Kgf/sqcm of 1.0 metre length, PVC connections 15mm size with PTMT nuts of length 450mm, concussive push button taps 15mm dia or bore, cast copper alloy, screwed for iron pipe, urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms), fixed in repairs complete all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) floor trap with grating including jointing to waste pipe fixed in solvent cement and making good to floor to match existing tile all as specified and directed.

Taking up or down 25 mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed.

S&F 25 mm bore UPVC pipes of pressure rating 10kg/cm2 with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal to store complete all as specified and directed

S&F 20 mm bore tube UPVC pipes of pressure rating 10kg/cm2 with all fittings and fixed complete to walls and ceilings or laid in floors all as specifed and directed.

M&L cutting, chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by engineer- in- charge.

M&L for fixed in repairs PVC valveless, syphonic action type flushing cistern of 10 litres capacity, white colour, with inlet, ball valve, float and handle including brackets all as specified and directed

S&F in repairs flush pipe of polythelene of low or high density or PVC 32mm dia for flushng cistern all as specified and directed.

S&F in repairs vitreous china wash down single piece WC of size 840x390x720 incl flush tank, softclose seat cover with 'S' or 'P' trap and other connecting items approved brand including fix with white cement complete, (Make-Jaquar Cat Pt No. VGS-WHT-0207BS and ZPS-WHT-1015UF) or equivalent in Parryware/Cera/Kajaria/Prayag

S&F in repairs wash hand basin vitreous china white (flat back) of size 550x400mm including 15 mm dia pillar cock, CI bracket 15 mm dia polythene PVC waste pipe 90cm long etc. complete all as specified

S&F in repairs for 32mm dia waste coupling fittings, brass, chromium plated for Wash basin etc with long screwed shanks and fly nut and bedded in red lead cement other complete all as specified and directed.

S&F in repairs for 40mm dia waste coupling fittings, brass, chromium plated for Kitchen sink etc with long screwed shanks and fly nut and bedded in red lead cement other complete all as specified and directed.

S&F in repairs for PVC connection 15 mm size with PTMT nut of length 600 mm long all as specified and directed.

S&F in repairs for Plastic water closed seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated/PVC or aluminium hinging device all as specified and directed

Supply and fixing in repairs 32mm dia PVC (flexible) waste pipe for wash hand basin complete all as specified and directed

Supply and fixing in repairs 38mm dia PVC (flexible) waste pipe for Kitchen sink complete all as specified and directed

S&F in repairs for stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore of size 15mm dia all as specified and directed.

S&F in repairs for stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore of size 15mm dia all as specified and directed, but fancy type and concealed type.

S&F in repairs 15 mm bore bib taps (Fancy Type) cast copper alloy chromium plated with crutch handle or butterfly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.

Supply and fixed in repairs CP angle cock 15mm dia fancy type cast copper alloy (Make-Jaquar Cat. No. Con-053KN) or equivalent in Zoloto/Gem/Prayag etc

S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup (Make : Prayad Cart Part No PIS-12H or Equivalent in Jaquar / Parryware)

S&F in repairs Brass chromium plated towel ring with round flange. (Make Prayag Cat Part No. BA-11 or Equivalent in Jaquar / Parryware)

S&F in repairs Brass chromium plated tubular towel rail 20mm dia & 60 cm long between flange. (Make : Prayag Cat Part No. BA-70 or Equivalent in Jaquar / Parryware)

Labour for drilling holes with drill machine with electric driven for gas pipe etc not exc 25 mm dia upto 10 cm depth in marble stone etc.

S&F in repairs for plate rack of stainless steel using 0.65mm thick sheet, size not less than 900x750x250mm with steel sleeves & hanging arrangement for utensile, complete all as specified and directed (Make : Prayag Cat No. P-348 or Equivalent in Jaquar / Parryware)

S&F in repairs for Corner glass self assembly size 300mm with chromium plated bracket guard and railing (Make : Prayag Cat No. BEA-44 or Equivalent in Jaquar / Parryware)

S&F rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting intel, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed by Engineer-in-charge.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe bore dia of 25mm (Minimum weight 455 gms) complete all as specified and as directed by Engineer-in-charge.

S&F in repairs for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes

Supply and fixed in repairs CP WHB mixture cast copper alloy with central hole for WHB and long shank fancy type 15 mm bore complete all as directed. (Make-Jaquar Cat No. Con-281KN or equivalent in Zoloto/Gem/Prayag model) etc.

Supply and fixed in repairs CP brass hot and cold 15mm dia wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting leg & wall flange complete all as directed. (Make : Jaquar Cat. Con-281KN or equivalent in Zoloto/Gem/Prayad Model) etc

S&F CP brass 15mm health faucets with 1 mtr tube and hook with metalic expandable tube 15mm complete set Make : Zim Cat No. 1624A or equivalent in Zoloto/Gem/Prayag Model

S&F in repairs shower rose chromium plated with or without swivel joints, 125mm size, including fixing to steel pipe or union.

S&F in repairs 100mm size bore CP shower rose after changing washer, nut etc complete all as specified and directed.

S&F in repairs, stainless steel sinks with drainage board, 1mm thick in kitchen with plugs, washers and waste pipe incl bedding in cement mortar on the dwarf wall or incl fixing cantilever brackets, waste pipe and connecting union to pipe, over all size 915x460mm bowl size 410mmx330mmx160mm

S&F in repairs, stainless steel sinks with out drainage board 1mm thick in kitchen with plugs, washers and waste pipe incl bedding in cement mortar on the dwarf wall or incl fixing cantilever brackets, waste pipe and connecting union to pipe, over all size 495x420 mm and bowl size 410mm x 330mm x 160mm

S&F in repairs stainless steel grating cover 100mm dia openable or hinge type fixed with white cement all as specified and directed.

Labour only clearing of air lock in toilets/bath and kitchen but excluding fittings complete all as specified and directed.

S&F in repair Mirror cabinet PVC/fiber of size 550x520x100 mm with sliding mirror 4mm thick of size 240x290x2 Nos with built in rack of size 230x150x90 mm with PVC plug etc with CP towel rail of length 270 mm and 100 mm dia. Make:Supreme / Saint Gobain or equivalent

M&L PCC 1:4:8 type D-2 (40mm graded stone aggregate) for sub base 50 mm thick without using extra complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 (40mm graded stone aggregate) for sub base 75 mm thick & finished even and smooth without using extra cement thick all as specified and as directed.

Demolition of stone slabs and tiles of any description laid bedded and pointed in mortar all as specified and directed..

S&F for chequered cement concrete tiles 30cmx30cmx25mm thick in floor set jointed with grey cement and pigment and pointed in neat cement slurry including 15 mm thick screed bed of CM (1:6) in floors complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block ruberised glossy finish on top portion of any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grage with grey cement and pigment complete all as specified and as directed.

M&L for sand cushoning having 50 mm thick including watering and consolidation complete all as specified and as directed by Engineer-In-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete.

M&L for mild section for framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars and similar work conforming to Fe-290, Gde E-165 complete all as specified

M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

S&F in repairs Low density polyethene pipe of pressure rating 6kg/cm2 fixed complete to wall ceiling or in floor, including all necessary accessories as elbow, bend, socket etc as in waste pipes, 40 mm dia bore for wash basin, sink and including all fitting etc all as specified

Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.

M&L PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed of CM (1:4) bedding complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed of CM (1:4) bedding complete all as specified.

Ditto all as per item No 94 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed of CM (1:4) bedding complete all as specified.

Ditto all as per item No 96 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified.

M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified.

Taking out carefully the precast RCC cover slabs of septic tanks, taking out scum/ sludge including water in a closed, container and deposit in an earth pit or sufficient size and depth dug in any type of soil within Defence land where directed at a distance exc 250 and n.exc 500 mtrs, returning filling in after disposal of scum/ sludge, clearing the bushes, vegetation etc up to a distance of 2 mtr from outer edge around the septic tank, including placing and setting the cover slab with cement mortar 1:6 after inspection etc complete all as directed for the following capacities

a) 10 Users capacity

b) 25 Users capacity

c) 50 Users capacity

d) 75 Users capacity

e) 100 Users capacity

f) 200 Users capacity

Removing carefully the cover slab of manholes of any size and shape and removing the scum / sludge including any organic or inorganic matters to a distance exc 250 and n.exc 500 mtra and setting the man hole covers in position in CM 1:6 after inspection etc for the following size of manholes (Manhole cover if provided new will be measured and paid separately)

a) Inner size up to 600x450mm & invert depth not exceeding 600mm

b) Inner size up to 600x450mm & invert depth exc 600mm and n. exc 900mm.

c) Inner size up to 600x600 mm & invert depth exc 600mm and n. exc 900mm.

d) Inner size up to 600x600mm & invert depth not exceeding 600mm.

e) Inner size up to 750x750mm & invert depth exc 600mm and n. exc 900mm

f) Inner size up to 900x1200mm & invert depth exc 1200mm.

Taking down grating and cleaning NT/FT for cleaning of blockage and refixing grating all as directed.

Taking down grating and cleaning Gully Trap for cleaning of blockage and refixing grating all as directed.

M&L for Clearing out blockage of Water Closet any description as per specified and directed.

Clearing carefully the blockages in sewage lines of the following bore dia by roding in between man holes and flushing with water if required [after opening the man holes covers and before replacing the same under item (2) above] all as directed by Engineer-in-Charge.

a) 100mm bore

b) 150mm bore

M&L for Excavation in trenches n. exc 1.50m wide and not exc 1.50m deep and getting out in any type of soil.

M&L for Returing and filling in trenches including spreading, leveling n.exc 25 cm thick including watering, well ramming.

M&L for Removing the excavated soil to a distance exc 50 mtrs and n. exc 100 mtr and depositing where directed at a level n. exc 1.5m above the starting point.

Demolition and breaking drain pipes 100 mm dia (salt glazed ware AC or reingored concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking drain pipes 150 mm dia (salt glazed ware AC or reingored concrete) set in cement mortar complete all as specified and directed

M&L PCC 1:3:6 type C2 using 40mm aggregate for concrete bed to 110 mm dia drain pipes of including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40mm aggregate for concrete bed to 160 mm dia drain pipes of including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed.

S&F UD PVC drainage pipes (SJ Type) S165/SN8/SDR34 160mm dia in any length with rubber ring joints laid in trenches all as specified and directed.

S&F UD PVC drainage pipes (SJ Type) S165/SN8/SDR34 110mm dia in any length with rubber ring joints laid in trenches all as specified and directed.

M&L for PCC 1:2:4 type B2 using 40mm graded stone aggregate as in surface channel and drain & benching of manhole and finishing even and smooth without using extra cement complete all as specified and directed..

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and cleaning premises complete all as specified .

M&L cement concrete (1:2:4) type B-1 using 20mm graded aggregate as in lintle upto 1.5m clear span, steps, bed plates, kerb & coping including necessary formwork.

Demolition of reinforced cement concrete in any position of any description not otherwise specifically provided for, reinforcement cut through to facilitate demolition.

M&L for Precast RCC (Nominal Mix) Type B1 1:2:4 (20 mm graded aggregate) in Plinth beams, slabs etc complete all as specified & directed.

Demolition of cement concrete block masonry built in cement mortar or cement lime mortar complete all as specified

M&L for precast cement concrete solid block masonry with solid blocks using PCC 1:3:6, type C1 (using 20mm graded stone aggregate), exc. 10cm in width, set in CM 1:4 all as specified.

M&L for precast cement concrete solid building block masonry or slabs n exc 10 cm thick (with plain or interlocking joints as directed) setting in CM 1:4, Type C1, PCC 1:3:6, (using 20mm graded stone aggregate), all as specified.

Taking down cement plaster in patches on brick/stone masonry wall incl raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L for rendering 10 mm thick cement plaster in CM (1:6), in patches on stone masonry/ brick work or concret surfaces, surface finished even and smooth without using extra cement complete all as specified

M&L for rendering 15 mm thick cement plaster in CM 1:4 including mixing water proofing compound on concrete/block masonry surfaces and finished even and smooth without using extra cement on all as specified.

Supply only integral water proofing compound

M&L for preparation of newly plastered wall surface and applying two coats of cement base paint all as specified and directed.

S&F in repairs vitreous china squating pan "Orissa Pattern" water closet of size 580x440 mm with integral footrest of 'P' or 'S' trap including provn of lime concrete bedding including connections to flushing pipe with low level PVC valve less symphonic action type flushing cistern of 10ltrs capacity white in colour with inlet, ball valve float and PVC flush pipe 32mm dia with white seat covermaking good disturbed portion to match existing surface complete all as specified and as directed. (Make :- Neycer/Parryware/Cera/Prayag)

Removing vegetation/small plants including uprooting completely and making good to match with existing surface with PCC 1:2:4 type B1 or CM 1:3 all as directed area n exc 0.10 Sqm including necessary scaffolding etc. all as specified and directed.

Cutting bushes and removal of vegetation inside and along the open drains to a width not more than 1.0 metre on either side of drains and removal of rubbish and disposing to a place where directed complete all as specified and as directed. NOTE: One metre length of drain shall be measured as one unit length.

M&L for providing precast cement concrete cover slabs for drain in RCC 1:2:4 type B1 (using 20mm graded aggregate) set in cement mortar 1:4 all as specified and directed.

M&L for deformed TMT steel bars 10mm dia and over cut to length, bent to shape required, including cranking, bending with MS wire annealed not less than 0.9mm dia all as specified and directed.

M&L for deformed TMT steel bars 50mm dia and over as in stirrups and cut to length, bent to shape required, including cranking, bending with MS wire annealed not less than 0.9mm dia all as specified and directed all as specified and directed.

CARTWHEEL CONSTRUCTION (BID ID -3086632)

M/s K Moorthi (BID ID -3075479)

CHANDER SEKER ENTERPRISE (BID ID -3084608)

SKV Engineering (BID ID -3085140)

Bismi Builders & Enterprises (BID ID -3079275)

Reliance Sales Agency (BID ID -3079595)