SPECIAL REPAIR TO BLDG NO SM 82 04 OFFRS MD QTRS AT DUNN MARG AND SM 199 04 OFFRS MD QTRS AT GOLF VIEW UNDER GE MIS MHOW

Amount

Taking down cement or cement lime plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 10mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, complete finished even and fair complete all as spd and directed.

Material & Labour for rendering in cement mortar 1 : 4 (10+5)=15mm thickness in two layers on brick/cement/stone surfaces and finished the surface even and fair including mixing with liquid WPC on top 5mm thick only complete all as spd and directed. Note :- Water proofing compound shall be paid separately.

M&L for rendering 5mm thick on concrete surfaces in cement mortar 1:3 finished on even and smooth without using extra cement as in ceiling, Chajja etc. complete all as spd and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer incl 3mm thick wall putty complete.

M & L for complete removal of existing treatment on walls and applying two coats of oil-bound distemper over a coat of primer on old plastered surfaces including necessary preparation to surfaces complete incl 3mm thick wall putty all as specified and as directed

Material and labour for preparation of new surface of wall and applying three coat of white wash, complete all as specified and as directed by Engineer-in-Charge

Material and labour for preparation of old surface of wall and applying two coat of white wash, complete all as specified and as directed by Engineer-in-Charge

M&L applying three coats of white wash on new Ceiling,chajja surface including preparation of surface.

M&L applying two coats of white wash on old Ceiling,chajja surface including preparation of surface.

Dismantling floor,hearth or wall tilling including cement mortar bedding (but not backing ) removing nserviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc

M&L for Light shade/Double charged/Ultra charged vitrified ceramic tiles 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 including dismantling of old tiles complete all as specified and as directed.

M&L for Light shade/Double charged/Ultra chargedvitrified ceramic tiles 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm ,in verical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement mortar in CM 1:4 including dismantling of old tiles complete all as specified and as directed.

M & L for Non Skid coloured Ceramic tiles 7 to 8mm thick(Square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors over and including 15mm thick screed in CM 1:6 , set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles.

M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM including dismantling of old tiles complete all as specified and as directed.

Demolition old laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc.

M&L 18-20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick Screed in CM (1:6) complete.

M & L 22 -25 mm thick kota stone, machine cut kota stone slab flooring over and including 20mm thick cement screed base laid in CM 1:6 , and jointed in neat cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete (mirror polished).

M & L Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar, window cill laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete (mirror polished)over and including 10mm thick rendering in CM 1:4 complete as specified and directed

Rounding to edges of stone slabs one edge such as steps cooking platform and other similar situations complete all as specified and as directed.

Taking down chowkats or frames not exc. 1.5 sq.m. each with shutters (without taking off shutters from the frames)

Taking down chowkats or frames exc. 1.5 sq.m. n.exc 4 sqm each with shutters (without taking off shutters from the frames)

Taking down door shutter from frame exc 1 Sqm but not exc 2 Sqm each and refixing the shutter in the same opening after easing and adjusting.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each .

Taking down shutter of any description n exc. 1 Sqm each complete.

S&F Plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints.

S&F for PVC door frames of sizes 50mm x 47 mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded prelam PVC `C' channel having a prelam PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable prelam PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing.

S&F Pressed steel frames size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified

M&L Providing, cement concrete type (C-1) 1:3:6 (12.5mm graded stone aggregate for filling of Pressed steel frame etc, rounded or chamfered on edges complete as specified, supplied and fixed

S & F 2nd class HW 35mm thick, plain framed paneled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and directed.

M&L Cutting holes in brick/block walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc half brick n.exc one brick complete as specified.

S & F mild steel bands, straps, support or stays for rainwater ventilating pipes including bolts if required, hook and eye, Hold fasts wall ties hooks for hanging fans, plain angle etc all as specified and directed.

S & F glazed skelten shutter, 35 mm thick, divided into squres plain chamfered open rebated and prepared to received glass guaze etc, edges of framing plain chamered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shuters as specified in SSR Part-I, Section 8, clause 8.24 (a) suppled and fittted to chowkats.

S & F 2 nd class hard wood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (with sash bar) edges divided into squares, with plain chamfered or rounded , mitred and rebated sash bars of any numbers ,beads, for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

M&L for preparation of newly small article such as rafter feet, bracket or cantilevers n exc 30 cm projection and blocks, lebels,etc. n exc 0.1 sq. m each and applying two coats of sythetic enamel paint over a paint of pink primer etc complete.

S/ F of 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each

S & F framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (incl steel sheeting or other covering, also fastening and fixing complete.

M & L preparation of new wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of primer complete all as specified

M&L preparation of old wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint.

Providing and fixing pre painted steel sliding window 3-Track, 2 glass panel and 1 mesh panel sliding window fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. Section for external frame should be of 107x44mm, Section for shutter should be of 35x49mm. Section of mesh should be of 35 x 49 mm.The windows should be paneled with 5mm thick plain float glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM).The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws conforms to IS -513:2008.

Providing and fixing of double rebate openable/fixed windows made of galvanized steel colour coated/powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 microns, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 72 x 55 mm, centre mullion section 72 x 50 mm, shutter section 47 x 20 mm,fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. complete as per the direction of Engineer in Chargeconforms to IS -513:2008.

Providing and fixing fixed louvers fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 grams/Sqm) with thickness of 0.58mm coated sections to be primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33 x 58 mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws conforms to IS -513:2008..

S&F Framed work such as grills,gratings, etc.. with ends of barsshouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete.

M & L preparation of new steel surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of primer complete all as specified

M&L preparation of old steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint.

S&F stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F in repairs stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F 4mm thick sheet glass,ordinary qauality and glazing with oil putty in square n exc 05 sqm in each pane including hacking out old brocken glass from wooden/steel frames all as spd and directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane including hacking out old brocken glass from wooden/steel frames all as spd and directed.

S & F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified

S & F 75 mm size butt hinges medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repair 125mm Double action spring hinges, mild steel with steel wire spring, stove enamelled, black

S&F 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified.

S&F in repairs 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified.

S&F 150 mm size aluminium anodized handle complete all as specified

S&F in repairs150 mm size aluminium anodized handle complete all as specified

S & F in repairs aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and directed.

S&F 300 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified

S&F 300 mm long Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified

S&F in repairs 300 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified

S&F mild steel 300mm ordinary rat tail rod springs including roller and roller plate complete

Roughening surfaces of old concrete roof by picking,sweeeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3kg of cement per sqm complete all as spd and direted

Material & Labour for 15mm thick rendering on roof surfaces in cement mortar (1 : 4) using with WPC finishes the surface even and smooth without using extra cement Note :- Water proofing compound shall be paid separately

M & L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.30 Kg/Sqm complete.

M & L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat will be paid seperately.)

M & L 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application including taking down old tarfelt water proofing treatment on roof surface & old plaster removed from site complete all as specified and directed. Note: Application of APP membrane must be done by authorised applicator of membrane manufacturer.

M&L for applying two coats of bitumen based aluminium painting on water proofing treatment with preparation of surface as on non assesible area complete all as specified and directed.

S & F in repair vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe)incl Plastic water closet seat, black, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device.

Supply and fix in repairs wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and waste pipe etc complete all as specified and directed.

S&F in repair CP bottle trap 32mm bore for wash basin with inlet and outlet screwed for connection including necessary packing union and cup and fixed.

S & F in repair 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed.

S&F in repair 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed.

S & F in repair CP brass fancy type 15mm bore bib taps, screwed down , and screwed for iron pipe or for brass ferrule Make : Jaquar cat part No CON-CHR-047KN or equivalent complete all as specified and directed

S & F in rep CP fancy type stop valves ,cast copper alloy concealed type , screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed.

S&F in repair 20mm bore dia stop valve cast copper alloy screwed down , high pressure with crutch or butter fly handle ,screwed both ends for pipe or for unions and fixed complete all as specified and directed.

S & F 10 ltrs capacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, PVC Flush pipe , pull or push type including brackets complete as fixed in repairs.

S&F 15 mm bore brass CP wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specfied and directed by engr in charge.

S&F in repairs 15mm bore brass CP wall mixture with provision for bath telephone shower and overhead shower all as specified and directed. Make. Prayag or Jaquar or equivalent.

S&F in repairs 15 mm angular stop cock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed by engr in charge.

S&F in repair CP health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed. .

S&Fixed in repair 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipes comlete all as directed..

S& F in repair CP toilet paper holder complete all as specified and as directed.

S&F in repairs soap dish (ovel) type mild steel chromium plated of size as sample kept in sample room complete. (Make: Jaquar cat part No ACN-CHR-1131N).

S&F in repair PVC bath cabinet mirror type with shutter complete(Make Prayag cat No 551)

S&F in repair corner glass shelf (with bracket) all as specified and directed

S&F in repairs shelf glass assembly consisting of 5.5mm thick sheet glass,shelf 120mm wide with CP bracket guard and railing 600mm long.

S & F PVC connections 15 mm size with PTMT nuts of length 600m fixed in repair.

S & F in repair stainless steel sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair gratings round type 125mm size of Stainles steel, (Min Weight 100 gms) complete all as specified and directed.

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc as in repair complete all as specified and directed.

S&F in repairs of CP towel ring round complete all as specified and directed.Make Jaguar cat part No AQN-CHR-7721 / PLUMBER/MARC and equivalent

S&F in repairs 20 mm dia Aluminium powder coated curtain rod with brackets at ends with arrangements as approved by GE complete all as spd &directed

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings.converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks,removing surplus serviceable bricks, hard-core,etc.. to store and rubbish not exc. 50m built in cement mortar complete all as spd and directed

Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required superfacial area exc 150sqcm n.exc 400 sqcm

S & F GI tubing 15mm bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors including taking down old steel tubing all complete all as specified and directed.

Refixing old steel tubing and connections in new or old position walls,ceiling,floors etc.15mm dia

S & F GI tubing 20 mm Bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors including taking down old steel tubing all complete all as specified and directed.

Refixing old steel tubing and connections in new or old position walls,ceiling,floors etc.20mm dia

S & F GI tubing 25 mm Bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors including taking down old steel tubing all complete all as specified and directed.all complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in Stone, concrete block or slab walls

S&F in repair rotational moulded polyethylene water storage tank of capacity 1000 ltr (Cylindrical/vertical with closed top) triple layer construction, ISI marked hoisted & fixed in position including dismantling of old tank and removing from site and should be sintex antibacterial or equivalent complete all as specified and directed.

S & F 20 mm dia Ball brass valves, high pressure, with polythene float and fly- nut com-plete, scre-wed for iron pipe or brass ferrule.

S & F in repairs 20 mm dia Ball brass valves, high pressure, with polythene float and fly- nut com-plete, scre-wed for iron pipe or brass ferrule.

Disconnecting existing tanks(1000 ltr),setting aside(or lowering if required) for repairs,cleaning etc and hoisting if required reconnecting and refixing in position including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc.

S&F in repairs PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors or walls

All as per Item Ser 111 above but except pipe dia

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors,walls

All as per Item 113 above but except pipe dia

S&F PVC (SWR) bends any radius 110mm dia

S&F PVC (SWR) bends any radius 75mm dia

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75mm dia

S&F PVC (SWR) branch piece, double (double Y), equal or unequal 110mm dia

S&F PVC (SWR) branch piece, double (double Y), equal or unequal 75mm dia

S&F 100mm stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

S&F 75mm stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement

M&L PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.

M & L PCC 1:2:4 type B 0) using 12.5 mm graded stone aggregate mixing with WPC as in levelling course in sunken portions etc complete all as specified and directed.

M & L Plain cement concrete 1:5:10 mix, type E-2 (using 40mm graded aggregate) as in filling of sunken portion complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:3 in vertical sides with WPC and 72 hrs testing for water tightness by ponding of water complete.

S&F 40mm dia GI Tubing as in spout pipe of medium grade including cutting in any length as required and fixed to wall & floor etc complete all as specified and directed.

S&F in repairs 100mm hasp and staple safety type of aluminium anodised including bolt to hinges plate and fixed with screws complete all as specified and as directed.

S&F 40mm flaps width (when open) continuous (Piano) hinges mild steel bright finish or electrogalvanised

Dismantling wall and ceiling boards (fibre,pulp,insulation,etc) or insulation boards/slabs/blankets/kitchen cupboards,any thickness, including cover fillets complete all as specified.

M&L 18/19mm Prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work all as specified and directed

S&F18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade.

S&F 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Plain colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process.

S & F modular type stainless steel basket size 0.50 m x 0.53 m x 0.10 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arrangement complete as specified and dirceted.

All as per item no 138 as above but basket size 0.50 m x 0.53 m x 0.15 m complete as specified and dirceted.

All as per item no 138 as above but basket size 0.50 m x 0.53 m x 0.21 m complete as specified and dirceted.

S&F 100mm size MS mat/glossy finish handle complete as specified and directed.

S&F stainless steel self closing hinge of 75mm size for PVC door shutter complete as specified and directed.

S&F 50x15mm size magnet door catcher for closing for PVC door shutter complete as specified and directed.

S&F mid steel drawer cabinet channel for moving the drawer etc complete as specified and directed.

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like

Use and wastage of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200m thick (Horizontal or sloping) Fair finished surfaces of concrete flat

M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality

S&F Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A complete.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement.

M & L for brick work with modular, sub-class ‘B’ bricks, straight or curved on plan exc. 6 m mean radius built in cement mortar (1:6), incl dismantling old bricks complete all as specified and as directed.

M&L heavy duty Endura coloured tiles of size 30cmx30cmx12 to 15mm thick (with gray cement and pigments) set,, jointed and pointed in neat cement slurry in floor, laid over and incl 15mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, grinding,including dismantling old tiles complete all as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

M&L complete removal of old decorated surface of wall and applying two coat of exterior weather proof water base emulsion paint white/coloured over a coat of primer same make over one coat of white cement based putty (where it is required) all as specified and directed. (Putty shall be measured and paid seperately under relevent items)

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connections and refixing after completion of all necessary work , complete all as specified and as directed.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for following :-

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One light point controlled by one, two way switch 5 Amps

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

One bell point controlled by one, bell switch 5 Amps

Description all as per item No 160 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

Description all as per item No. 160 here in before but using 4.0 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point)

S & F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site.

S & F for socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

S & F for stepped type electronic fan regulator flushType complete all as specified and directed at site.

S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.

S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

S & F for Modular Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for Modular Switch Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F for for Bell push modular 6 Amps single module complete all as specified.

S & F for lamp holder , PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed.

S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

S & F for Modular type TV Socket out let complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Four runs of 6 sqmm cable, two runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit

S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps complete all as specified and as directed complete all as specified and as directed

S & F for ceiling fans complete with electronic type regulator and accessories 230 Volts, 1200 mm sweep ISI Mark 2 star rated compelte all as specified and directed.

Labour only for taking down and refixing the celing fan/ Exhaust fan obtained from item No 6 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed.

S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed

S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and as directed. Make Havells Cat No LHDLO7150099 or its equvalent in Philips, Bajaj.

S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make- Bajaj Cat Part No BCLSB 10 NW, Haveels Cat Pt No. LHEXACP71N1W010 or its equivallent model in Wipro, Philips.

S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :- Bajaj Cat No BIBWP 10W LED or its equvalent in Philips, Wipro, Havells.

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI , Havells Cat Pt No. LHEXBLP7PN1W020

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat part No ENXT P 24L WH CR PC SD (Edge plus series) or its equvalent in Philips, Wipro.

S & F for energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Chitragupta Construction

M/S Parikshit Sharma

M/s Himgiri construction

M/S GARG CONSTRUCTION

GEETANJALI CONSTRUCTIONS

M/S Sunshine Construction

Goyal Construction

APconstruction