REPAIR AND REPLACEMENT TO DOORS WINDOWS FLOORINGS SANITRAY FITTINGS AND RELATED BR WORKS AND INTERNAL ELECTRIFICATION TO VARIOUS E/M INSTALLATION AT INS TUNIR UNDER AGE BR II AT NAVAL STATION KARANJA

Amount

Notes : - (i) The work is at Serial No.61 of TPP 2025-26 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department. (iv)The Unit Rate quoted are deemed to include for the following and nothing extra will be paid for these works: (a). Supplying, erecting and use of scaffolding upto required height (max 25 to 30m) or upto 8th floor height with necessary H-frames, pipes, couplers, buckles, bracing, top platform with support railing at top etc. at all levels of building including carriage of the materials to the location, erecting, fixing the scaffolding and dismembering the same after working and taking away the scaffolding materials etc. complete as per direction of Engineer-in-charge. (b). Supplying, erecting & use of temporary bamboo scaffolding around the building as required. The scaffolding is to be secured properly in position by bracings, ties clamps, etc. complete including providing and erecting working platform at all heights as required, including removal after completion of work all as per direction of Engineer-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness incl Nainital or similar pattern roof covering complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour (as approved) having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Taking down existing bitumen felt roof treatment including cement mortar bedding and cleaning the surface and removal outside the MoD land, complete all as specified and as directed. Note:- 1. Taking down earthing strips incl insulators from roof for treatment and re-fixing of same with existing specification in the same position after laying APP membrane including replacement of broken insulators, PVC rawl plus & screws etc are deemed to be inclusive in the rate quoted by the contractor. 2. Unit rate quoted shall also include for removal of PVC water storage tank wherever existing; carefully and refixing at the same or other position after completion of roof repair works. 3. APP work shall be carried out on RCC PENT roof at 15-18 mtr height (non accessible roof).

Demolition of cement concrete (unreinforced) roof or chajja padding of any description and any position not otherwise specifically provided for complete all as specified and directed.

M&L PCC (1:2:4) type B-1, using 20 mm graded mechanically crushed stone aggregates as in padding (to roof to maintain the required slope), chajjas, balconies, canopies, desk slabs and in shelves and finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L water proofing treatment to roof surfaces complete all as specified and as directed consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces (b) A layer of 4mm thick APP polymeric membrane of weight not less than 4.80 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with end laps of the 10cm and side over laps of 7.5cm by flame (by torch application) all as per manufacturer’s instructions. NOTE: work shall be executed by authorsided appicator of the manufacturer

M&L for appling two coats of Bitumen water proofing aluminium heat resistance paint @ 0.10 kg/Sqm over & including one coat of primer on the roof as per manufacture's instructions complete all as specified and as directed.

M&L for ready mix plaster 10mm thick cement plaster on roof top/ concrte surface including WPC by weight of 3% of total cement content complete all as specified and as directed. Note : WPC will be measured separately

Supply only liquid water proofing compound mixed with cement concrete/ cement plaster as per manufacture's instruction complete all as specified and as directed.

Taking down chowkats or frames area exc 1.5sqm but n.exc 4 sqm each with shutter (without taking off shutter from the frame) complete all as specified and as directed

Taking down chowkats or frames area n. exc 1.5sqm each with shutter (without taking off shutter from the frame) complete all as specified and as directed

Taking down shutters of any description area exc 1 Sqm but nexc 2 sqm complete all as specified and directed.

S&F IInd class hard wood, plain solid, straight, chowkats and frames wrought framed rebated on the solid, rounded or chamfered or ornamental type put together with glue pinned at joints complete all as specified and as directed.

M&L for second class hardwood, 30 mm thickness plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; and fitted to chowkats complete all as specified and as directed.

M&L for second class hardwood, 35 mm thickness, glazed and skeleton door shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; complete all as specified and as directed.

M&L for second class hardwood 30 mm thickness, glazed and skeleton windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet bedding and jointed together with solvent cement complete all as specified and as directed.

S&F for aluminium door/window/ventilator/partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading,screws etc, complete and also including powder coated aluminium fittings such as stainless steel hinges, tower bolts, hooks & eyes, peg stays and handles, concealed star lock for aluminium window, Mortice lock vertical type size 100mm 04 lever for door, rubber beading suitable for fixing 4mm/5mm thick glass in aluminium window/doors including connected items, with and making good to the disturbed portion with its original specifications incl taking down existing members/frame any position complete all as specified and directed.

S&F in repairs 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice laminations fixed between aluminium section with and including snap fitting aluminium clips of polyester powder coated along with the glass with rubber gasket, complete all as specified and as directed.

S&F concealed star lock, size 75mm powder coated for aluminium window fixed as per manufacturers instructions complete all as specified and as directed.

M&L 4 mm thick plain glass sheets ordinary quality in any size, each pane fixed with rubber beading or oil putty for windows/ doors/ partition etc complete all as specified and as directed.

S&F for rubber beading suitable for fixing 4mm/5mm thick glass in aluminium window / doors etc complete all as specified and as directed.

S&F in repairs aluminium anodized grill of design DG 104 pattern made out of 10mm dia rod Fixed with and including standard aluminium frame of F section of size 23.40mm x 15.30mm &1.4mm thick all as per manufactures instructions complete all as specified and as directed.

S&F in repairs aluminium (extruded section) body hydraulically door closer regaulted, designation No.3 universal type, suitable for door shuttes of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F extruded aluminium alloy handles fabricated type anodized 150 mm size complete all as specified and as directed.

M&L stainless steel Butt hinges medium weight, cold rolled and fixed 100 mm long complete all as specified and as directed.

S&F 150 mm stainless steel barrel tower bolts of extruded section and fixed to shutter complete all as specified and as directed.

S&F in repairs 300mm dia Stainless steel sliding door bolts, Clip type with bright bolt not less than 12mm dia with a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate complete all as specified and as directed.

Preparation of new wooden surfaces over 10cm width or girth and M&L for applying two coats of synthetic enamel paint over & including one coat of pink primer complete all as specified and directed.

M&L for Petty repairs to taking down steel/wood window/ ventilator frame with shutters exc .5 sqm n.exc 1.5 sqm each shutter, repairing, tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc, replacement of minors such as screws, clamps, cleats etc and refixing in the same opening (no extra payment will be paid for external window shutters of upto 10th floor) complete all as specified and as directed.

M&L for Petty repairs to taking down wooden/PVC door shutters exc 1.5 sqm n.exc 4 sqm each shutter, repairing, tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc ,replacement of minor items such as screws, cleats, clamps etc and refixing on the same opening (no extra payment will be paid for welding of new hinges on steel chowkat frame) complete all as specified and as directed.

Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over & including 15mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 20-25 mm thick machine cut Kota stone slab flooring over & including cement screed bed 15mm thick in CM 1:6 and jointed with gray cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

M&L for 20-22 mm thick machine cut Kota stone as in risers of steps, skirting, dado, and pillar laid over & including cement mortar 10 mm thick 1:4 and jointed with with gray cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

M&L for Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 complete all as specified and directed.

M&L for framed work such as grills, gratings, post of angle iron etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed. Note:-Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket of security wall, contractor shall make his own arrangement for welding for boundary wall by using gen sets or any alternative arrangement.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, holdfast etc, of grade Fe 410-W (Gde E-250) quality A complete drill for fixing of steel sheeting or other covering doors, etc to be prepared by hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running, rails & guide) and hanging also fastening and fixing complete all as specified and directed.

S&F Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Fe 410 W (Gde-E-250) quality-A complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces and M&L for applying one coat of red oxide primer and including two coats of synthetic enamel paint complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured non skid coloured ceramic tiles in patches matching with existing tile 7 to 8mm thick (squar / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15 mm thick screed bed in cement mortar in (1:6) complete all as specified and as directed by Engineer-in-Charge.

M&L for glazed ceramic colour designer concept glazed ceramic tiles in patches matching with existing tile 350mm x 250mm x 7mm or 450mm x 350mm x 7mm size as in walls set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed. .

M&L PCC 1:4:8 type D2, using (40 mm graded agg) , 75mm thick as in sub base of flooring complete all as specified and as directed.

M&L for 60mm Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade strenth not less than M-35 of any description or thickness complete all as specified and as directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L PCC 1:2:4 type B1 using (20mm graded stone aggregate) as in kerbing all around tile complete all as specified and directed.

M & L PCC 1:3:6, type C2 (using 40mm graded stone aggregates) 75 mm thick as in plinth protection without using extra cement complete all as specified and directed.

Dismantling of brick work built in cement mortar including all qoins, arches, pillars, etc. complete all as specified and as directed.

M&L for Brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed.

All as per BoQ Serial item No. 1.55 but except bricks. Note:- Serviceable bricks obatined from demolition shall be re-used after cleaning etc

M&L for PCC 1:3:6, type C1 (using 20 mm graded stone aggregates) as in coping or filling for hold fast including use & waste of formork as required complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified and as directed.

M&L for ready mix plaster rendering 10 mm thick on fair faces of brick/concrete surfaces , finished even and smooth without smoothing extra cement complete all as specified and directed. Note:- (i) Item rate shall be include any height of Bldgs for scafolding as all arrangement. (ii) WPC shall be measured & paid seprately.

M&L for ready mix plaster rendering 15 mm thick of brick work or concrete surfaces finished even and fair surfaces without using extra cement,complete all as specified and as directed. Note:- (i) Item rate shall be include any height of Bldgs for scafolding as all arrangement. (ii) WPC shall be measured & paid seprately.

M&L for using ready mix plaster rendering 5 mm thick on ceiling or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. Note:- (i) Item rate shall be include any height of Bldgs for scafolding as all arrangement.

Preparation of new or previously untreated plastered surfaces of walls and M&L for applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern over & including one coat of primer complete all as specified and as directed

Preparing new plastered surfaces of walls and M&L for applying two coats of oil bound distemper over & including a coat of chalk whitening on plastered surfaces complete all as specified and directed.

Preparation of new plastered surface of ceiling and M&L for applying three coat of white wash on ceiling complete all as specified and directed.

Preparation of plastered or unplastered old decorated surfaces of walls and ceiling ; filling cracks/hole by applying walls and ceiling putty (multipurpose mixer will be used for uniform and proper mixing of putty) and M&L for applying one coat of distemper oil emulsion white or coloured by auto roller complete including removal of nails etc and grinding where necessary complete all as specified & directed.

Complete removal of existing treatment of walls and M&L for applying two coats of acrylic (antifungal) exterior grade paint of camouflage pattern over & including one coat of primer on wall/roof by auto roller complete upto 4th storey including necessary scaffolding etc complete all as specified and as directed.

Preparation of old wall surfaces of any description and M&L for applying one coat of acrylic (antifungal) exterior grade paint of camouflage pattern by auto roller upto 4th storey including necessary scaffolding etc complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white, flat back size 550mm x 400mm including cutting for and pinning in ends of brackets with & including supply & fixing of 32 mm low dencity polylethyne pipes (LDPE) of pressure rating 6kg/cm2, coupling, PVC connection 600mm long with 15 mm dia PTMT cheknuts, brackets complete all as specified and as directed.

S&F in repairs 60 cm long PVC connection with two nos PTMT nut and rubber washers suitable for 15mm bore GI Pipe complete all as specified and as directed.

S&F in repairs PTMT bib tap 15mm dia with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule with check nut 15mm bore, minimum weight 90 gms complete all as specified and as directed.

S&F in repairs PTMT stop valve 15mm dia with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule with check nut 15mm bore, minimum weight 90 gms complete all as specified and as directed.

S&F in repairs PTMT pillar taps 15mm dia with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule with check nut 15mm bore, minimum weight 90 gms complete all as specified and as directed.

S&F in repairs PTMT angle valve 15mm dia with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule with check nut 15mm bore, minimum weight 90 gms complete all as specified and as directed.

S&F in repairs 10ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float & handle including brackets complete all as specified and as directed.

S&F in repairs PTMT waste coupling 31/32mm bore of discharge (Half or full threaded) Min weight 45 gms, complete all as specified and as directed.

S&F in repairs PTMT waste pipe 31/32 mm bore 80 cm long complete all as specified and as directed.

S&F in repairs vitreous china water closet (Squatting pan) “Orissa” pattern of size 580mm x 440mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding complete all as specified and directed.

M&L for 15 mm dia steel tube medium grade galvanized with all fittings and fixed complete in wall, ceiling or laid in floor complete including taking up or down steel tubing and connections 15 mm bore complete all as specified and as directed.

M&L for 20 mm dia steel tube medium grade galvanized with all fittings and fixed complete in wall, ceiling or laid in floor complete including taking up or down steel tubing and connections 20 mm bore complete all as specified and as directed.

S&F CPVC water tubing outer dia 20mm bore pipe, SDR 11 including provision of all fittings and connected completed in concealed and surface, along with primer & slovent cement for joint as per ASTM D 2564, pipe material shall be as per ASTM D 1785, fitting/ flanges shall be as per ASTM D2467, incl taking down old pipe line in concealed and surface complete all as specified and as directed.

All as per BoQ Serial Item No.1.80 above but outer dia 25mm bore CPVC pipe.

S&F in repairs Vitreous China sensor Urinal of size 480mm x 300mm x 740mm required colour with & including brass chromium plated brackets, waste coupling, PVC connection and waste pipe complete all as specified and as directed. Make: Jaguar, cat part No. URS-WHT-13255 or equivalent as approved by GE.

S&F in repairs health faucet (brass) with hook & 1.00 mtr tube complete all as specified and as directed.

Preparing of new or previously untreated steel surface of any decription over 10cm in width or girth and M&L for applying two coats of aluminium paint over & including one coat of red oxide primer complete all as specified and directed.

Preparing old painted steel surface of any decription over 10cm in width or girth and M&L for applying one coat of aluminium paint complete all as specified and directed

M&L for PCC 1:2:4 type B2 using (40mm graded stone aggregates) as in flooring, ramp, surfaced even and fair without using extra cement mixed with metallic floor hardener @3 % by weight of cement complete all as specified and as directed. Note:- Metallic floor hardener shall be measured and paid separately.

Supply only Metallic floor hardener complete all as specified and as directed.

E/M Works

S&F in repairs flame proof LED well glass hanging type 60w fitting on existing light point with suitable hanging arrangements one light control with one MCB SP/Switch, complete all as specified and directed. Note:The rates includes taking down old light fitting and providing suitable necessary ladders /equipments for any height to taking down the items.

S&F in repairs flame proof LED well glass hanging type 100w fitting on existing light point with suitable hanging arrangements one light control with one MCB SP/switch, complete all as specified and directed. Note:The rates includes taking down old light fitting and providing suitable necessary ladders /equipments for any height to taking down the items.

S&F in repairs HIGH BAY LED lights hanging/ceiling mounting type 100w fitting with PC diffuser with surge protection on existing light point with suitable hanging arrangements one light control with one MCB SP/switch, complete all as specified and directed. Note:The rates includes taking down old light fitting and providing suitable necessary ladders /equipments for any height to taking down the items.

S&F in repairs LED recess/surface mounted approx size 600mm x 600mm luminarie, 36/40w fitting, 220V, AC, 50 Hz, suge protection, high power factor complete all as specified and as directed.

S&F in repairs FLP plug in switch socket 16A, 3pin (2P+E), 220V, 50 Hz, AC and fixing arrangement complete all as specified and as directed.

S&F in repairs FLP plugin switch socket 25A, 3pin (2P+E) , 220V, 50 Hz ,AC and fixing arrangement including taking down of existing FLP swtich socket complete all as specified and as directed.

S&F in repairs FLP plugin switch socket 32A, 5pin (4P+E), 50 Hz, AC and fixing arrangement complete all as specified and as directed. Make: Shyam switch Gear/SSPLRI/146 or Sudhir Cat Part No RI/A/146-3 or equivalent as approved by GE.

S&F in repairs FLP LED Type tube light fitting 1 x 20 watt, 4' long, 220V, 50 Hz, AC and fixing arrangement complete all as specified and as directed. Make/Cat No: Shyam switch Gear/SSPLRI/146 or Sudhir Cat Part No RI/A/146-3 or equivalent as approved by GE.

S&F in repairs FLP LED Type tube light fitting 2 x 20 watt, 4' long, 220V, 50 Hz, AC and fixing arrangement complete all as specified and as directed.

S&F in repairs MCCB 4 pole, thermal magnetic release range 100 Amps, breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and as directed.

S&F in repairs MCCB 4 pole, thermal magnetic release range 125 Amps, breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and as directed.

S&F in repairs MCCB 4 pole, thermal magnetic release range 63 Amps, breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and as directed.

S&F in repairs MCCB 4 pole, thermal magnetic release range 40 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and as directed.

S&F in repairs 6 to 32 AMP MCB single pole 240 V 10 KA (C-Series) complete all as specified and as directed.

S&F in repairs 32 AMP MCB SPN 240 V 10 KA (C-Series) complete all as specified and as directed.

S&F in repairs round/square type, recessed /surface 12W/14W warm /white LED downlight dimmable with high lumen 230V, complete all as specified and as directed.

S&F in repairs switch piano flush button single pole one way, 6 Amp complete all as specified and as directed.

S&F in repairs Switch socket outlet 2 in 1, 3 pin, 6 Amp, flush type complete all as specified and as directed.

S&F in repairs Socket outlet 2 in 1, 3 pin, 6 Amp flush type complete all as specified and as directed.

S&F in repairs Switch socket outlet 15 Amp, 5-in-1, controlled by one switch complete all as specified and as directed.

S&F in repairs Socket type EME fan 5 step regulator for ceiling fan of suitable size, complete all as specified and as directed.

S&F in repairs modular step type fan regulator, 120W, AC, 50Hz complete all as specified and as directed.

S&F in repairs modular switch 1 module 6 amp one way complete all as specified and as directed.

S&F in repairs modular switch 1 module 16 amp one way complete all as specified and as directed.

S&F in repairs modular socket 2 module universal type 5/6 amp one way complete all as specified and as directed.

S&F in repairs modular socket 2 module universal type 15/16 amp one way complete all as specified and as directed.

Supply and fix modular bell push 6A 1 module complete all as specified and directed.

S&F in repairs ceiling rose three terminal complete all as specified and as directed.

S&F in repairs LED tube rod 20 watt, 220V, 50Hz, AC complete all as specified and as directed.

S&F in repairs FLP junction box 4 way 100mm including all connected accessories complete all as specified and as directed.

S&F in repairs FLP FLEXIBLE metalic pipe for 19/20 mm dia complete all as specified and as directed.

S&F in repairs FLP FLEXIBLE metalic hose conduit 1000 mm long for 19/20 mm dia fixed on directed place complete all as specified and directed.

S&F in repairs FLP rotary switch single pole 10/16 Amps and fixing arrangement complete all as specified and as directed.

S&F in repairs flame proof LED flood light,100w fitting duly fixed on wall surface complete all as specified and directed. Note:The rates includes taking down old light fitting and providing suitable necessary ladders /equipments for any height to taking down the items.

S&F in repairs LED building security light 45 watt with hanging arrangement in wall/surface/ceiling connecting with & including all required accessories like PVC box base, flexible cable from ceiling rose etc Surface and wall mounted LED batten, complete all as specified and as directed.

M.K Enterprises (BID ID -3384468)

M/s Vishwakarma Enterprises (BID ID -3381619)

Mahadev Enterprises (BID ID -3386183)

37AAOFJ7439G1ZV (BID ID -3382312)