Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.6 LAccepted-AOC C O ADNEEDS ENTERPRISES TIRAPGATE TIRAPGATE LEKHAPANI TINSUKIA ASSAM 786182 UDYAM AS 26 0000077 | TINSUKIA | ASSAM | 786182 | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹15.3 L+₹65,227 (4.47%)Rejected-Finance NAU PUKHRI ROAD MILLAN PALLY BYE LANE 2 NEAR GOYAL PALACE PO DISTT TINSUKIA ASSAM 786125 | TINSUKIA | ASSAM | 786125 | L2 | Rejected-Finance Due to higher rates |
Tender Value
₹14.5 L
EMD Value
₹29,000
Closing Date
3 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
PROVN OF COVERED BAY FOR 8 X AMB VEH FOR 402 FD HOSP AT LEKHAPANI MIL STN
2022_MES_536109_4
8668/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E and category a (i)
4 documents required · 4 mandatory
₹500
GE LEKHAPANI
₹29,000
Yes
21 Nov 2022
12 Oct 2022
7 Nov 2022
12 Oct 2022
3 Nov 2022
20 Oct 2022
Amount
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundations,etc and getting out in soft/ loose soil complete all as specified and directed.
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm of soft loose soil.complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
M&L PCC (1:4:8), type D-2, (using 40mm graded stone aggregates) as in foundations, filling, mass concrete etc complete all as specified and directed.
M&L PCC ( 1:3:6 ), type C-2 (using 40 mm graded stone aggregate), as in sub base of floor complete all as specified and as directed.
M&L RCC M-25 (Design Mix), (using 20mm graded stone aggregate) as in foundations, plinth beams etc raft footings, and similar works complete all as specified and directed.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, straight for curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.
M&L Rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and finishing fair and even complete all as specified and directed.
M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, with and including watering and well rammed to a true surface using 8 to 12 Ton power roller complete all as directed by Eng-in-charge.
Rolling and consolidating formation surfaces in cutting using 8 to 12 Ton power roller,etc complete all as directed by Eng-in-charge.
M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L Factory made chamfered edge cement concrete paver block with grey cement and no pigments any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade.manufactured with table vibratoy method using PU mould laid in required coloured and pattern laid over sand bed complete all as specified and directed by eng-in-charge. Note:-Sand bed shall be measured and paid separately
M&L Factory made chamfered edge cement concrete paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade.manufactured with table vibratoy method using PU mould laid in required coloured and pattern laid over sand bed complete all as specified and directed by eng-in-charge. Note:-Sand bed shall be measured and paid separately.
M&L RCC M-25 (Design Mix), (using 20mm graded stone aggregate) as in columns and similar works complete all as specified and directed.
Use and waste of formwork to sides of concrete foundation, footings, base of coloumns, raft beams, columns jbelow GL, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.
M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed.
All as per Item 18 above, but 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders,complete all as specified and directed.
M&L for 50 mm thick PCC (1:3:6) type C-2, (using 40 mm graded stone aggregates as in plinth protection ect including finishing cement concrete surfaces even and smooth without using extra cement including making joints with hot bitumastic mix in propotion of bitumen and sand (1:2) complete as specified and directed.
S&F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 (Yst.-310) complete all as specified and directed.
S & F Steel work of in hollow rectangular or square tubular trusses incl special shaped washer etc complete using ERW or HRW welded conforming to IS - 4923 (Yst-310) complete all as specified and directed.
S&F Rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and directed.
M&L for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50 mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
M&L for hot dip aluminium-zinc alloy metallic coated plain steel sheet, as per IS15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50 mm thick of an approved colour and having yield strength of 550 MPa as inridge/valley/gutter/eaves boarding fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
M&L Prepration of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L Preparation of new steel and un treated iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F Mild steel screw bolts (Machine made) with hexagonal or square head at one ends and screwed the other or screwed both ends each screwed end to be fitted with washers complete all as specified and directed
S&F RCC pipes 300 mm bore, class NP3 laid and jointed complete with collars completed all as specified and directed.
MAA COMMUNICATION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .