PROVN OF SECURITY LIGHTS, GEYSERS, CERTAIN ELECTRIC AND MISC WORKS AND SPL REPAIR TO CONVERSION OF O/H LINE TO AB CABLE UNDER GE 861 EWS

Amount

Supply and fixing in repair flood light luminare 30 watt with high power COB, LED module in pressure die cast aluminium housing having ingress protection 65, IK-07, powder coated and with alluminium reflector for uniform distribution of light and with U-bracket having vertical adjustable arrangement complete incl suitable size copper conductor cable for making electric connection all as specified and directed. Make : Havells Cat part No LHEPBFUEIN6W030 OR Equivalent/Crompton Greaves/Bajaj.

Supply and fixing or passing through pipe or binding with fencing/poles etc 1100 volts grade PVC insulated flexible copper conductor of size 2.5 Sqmm three core, complete all as specified by the Engineer in charge.

Supply and fixing 1100 volts grade copper conductor of size 2.5 Sqmm single core, complete all as specified by the Engineer in charge.

Supply and fixing 1100 volts grade copper conductor of size 4.0 Sqmm single core, complete all as specified by the Engineer in charge.

Supply and fixing 1100 volts grade copper conductor of size 6.0 Sqmm single core, complete all as specified by the Engineer in charge.

Supply laying connecting and testing 1100 volt graded heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 16 Sqmm normal cross section 4.0 core including suitable size lugs laid in trenches fixed to pole or passing through pipes incl all necessary clamps nuts, bolts and washers and remove unsv cable complete all as specified.

Supply laying connecting and testing 1100 volt graded heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 25 Sqmm normal cross section 4.0 core including suitable size lugs laid in trenches fixed to pole or passing through pipes incl all necessary clamps nuts, bolts and washers and remove unsv cable complete all as specified.

Supply and fix factory made junction box size 450 x 400 x 150 mm made out of 3.15 mm thick CRCA sheet powder coated front door openable with magnetic locking arrangement including aluminium bus bar 4 Nos of size 200 Amps mounted on epoxy based post insulators and drilled holes for connections consisting with MCB SP 06 Amps-01 Nos all as required and fixed to poles by using MS clamp of size 25 x 6 mm and including suitable nuts, bolts and washers complete all as specified and directed.

Supply and install storage type electric water Geyser of capacity 25 Ltr BEE 5 star rating, body of ABS plastic material , copper inner tank, auto cut, adjustable temperature saftey valve, thermal cut out, input voltage 230 volt, power consumption 2 KW, digital display with various option that can be set with remote with two years warranty including all fittings, 4 sets of nuts, bolts and washers of minimum dia 10mm , grouting in wall , 02 Nos PVC connections 450mm long suitable for hot/cold water and two nos brass CP 15mm bore stop valve , 01 No NRV, 01 No PRV, 01 No plug top 16 Amps and making all eletric and water connections, complete all as directed by Engr-in-Charge. Make : Havells/Bajaj/Usha etc

M & L for point wiring for one light point/fan point controlled by one switch with 2.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

M&L for Switch Socket combination 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts .

S & F switch socket combination 5 pin 5 Amps, flush type multipurpose complete all as specified and directed.

S & F switch socket combination 2 in 1, 3/6 pin, 5 and 15 Amps flush type universal complete all as specified & directed.

Supply and fixing Plug top 15/16 A all as specified and directed by Engineer - in - Charge

S&F 1100 volt grade heavy duty cable with PVC insulated aluminium stranded conductor of size 10 Sqmm 2 core cable served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4 mm suspension wire one twin core cable flat or circular complete all as specified and directed by EIC Make- Havells/Plaza/Gloster.

Supply and fixing LED lamp 10W, 240V, complete all as specified and directed by Egnr-in-Charge.

S&F MCBs TPN 415 Volts 40-63 Amp rupturing capacity 10 kA all as specified and directed by Engr-In-Charge Make: Havells/Legrand/ABB

S&F MCBs single pole & neutral having capacity 40-63 Amp with rupturing capacity 10kA all as specified and directed by Engr-In-charge.

S&F off load change over switch 4 pole 415 volts , 100 Amps rating side handle operated in sheet metal enclosure , complete all as specified and directed.

M&L for sub main wiring 2x4.0 Sqmm + 1X4.0 Sqmm nominal cross sectional area PVC insulated flexible copper conductor cable 1100 Volts grade, stranded, PVC insulated, unsheathed drawing into and including rigid non metalic concealed PVC conduit medium of size 25mm dia, incl all accessories/fittings, brass screws, washers etc and connected to common earth dolly, cutting chases to walls for laying/fixing conduit and making good the disturbed wall surfaces to match with existing specification incl taking down old unsv complete all as required at site or directed by Engr-in- charge. .

Supply and fixing sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 415 volts 4 way TPN, including suitable size copper bus bar and neutral link make Hager/ Merlin Gerin multi-9/ Standard/ Havells/ Legrand fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification.

Supply and fixing 16 Sqmm, 3 Core, flat submersible Cable, PVC insulated, PVC sheathed with multi-stranded copper conductors, 1100 Volt grade, complete all as specified and directed by Engineer-in-Charge.

S&F fully automatic star delta starter suitable for 30 HP, 415 volt, 50 HZ AC supply electric motor contactor size 25 , over load relay 17-25 Amp, CAT Part No IHPDOLL'E and HSN code 8536 all as specified and directed by Engr-In-Charge

S & F aluminium thimbles 1100 volts suitable for 70 Sqmm to 150 Sqmm cable complete all as specified and directed by EIC. Make : Denson/Dowells/Recham.

S & F aluminium thimbles 1100 volts suitable for 25 Sqmm to 50 Sqmm cable complete all as specified and directed by EIC. Make : Denson/Dowells/Recham.

Supply only FR PVC insulated electrical insulation tape 25 mm wide and 7mtr roll length complete all as specified and directed by EIC. Make : Denson/Dowells/Recham.

S & F electric lamp of 0 watt in colour like red and green as per sample held with E/M sub divn, complete all as specified and directed by EIC.

S&F 30 watt LED security light new generation energy saving eco friendly long life versatile pressure die cast aluminium IP66 road way luminaries with high power LED as light source with lens electronic driver. All a specified and directed by Engr-In-Charge. Make Havells Cat Part No LHETBXU7PAIS030 or equivalent/CROMPTON GREAVES/GE.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 35 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches/fixing on wall in PVC conduit pipe with the help of clamp/shddles, under road crossing through protection pipe etc complete all as specified and directed.

Supply and fixing voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of +2.5% and of 5 KVA, complete all as specified and directed by Engineer - in - Charge.

Supply and installation of Submersible pump, electric driven 415 V, TP suitable for 200/250 mm dia bore well ( Casing pipe of size 200/250 mm),10 HP , out put min 60 LPM @ head 370 mtr. Model 60 HH 1524 including automatic star delta starter for submersible pump, sheet metal enclosure of suitable capacity as directed including analog amp meter,volt meter, indicator ,having suitable for capacity 15 HP including 80 RM flexible flat PVC sheathed stranderd copper conductor of size 10 Sqmm three core, complete all as specified and directed.

Supply and installation of Submersible pump, electric driven 415 V, TP suitable for 200/250 mm dia bore well ( Casing pipe of size 200/250 mm), 7.5 HP, out put min 60 LPM @ head 370 mtr. Model 60 HH 1524 including automatic star delta starter for submersible pump, sheet metal enclosure of suitable capacity as directed including analog amp meter,volt meter, indicator ,having suitable for capacity 15 HP including 80 RM flexible flat PVC sheathed stranderd copper conductor of size 10 Sqmm three core, complete all as specified and directed.

Supply and fixing motor protection relay suitable for 5HP submersible pump set model No MPR300 thermal overload relay range 4-11 Amps, auxillary supply voltage 110 volt AC having the facility of inbuilt CTs, trip indication , test facility , protection of thermal overload , single phasing current unbalance , phase sequence , locked rotor, earth fault under corrent. Cat Part No MPR302BB040 of L&T or equivalent makes , complete all as specified and directed by Engineer-in-Charge.

Supply and fixing motor protection relay suitable for 7.5 HP submersible pump set model No MPR300 thermal overload relay range 8-22 Amps, auxillary supply voltage 110 volt AC having the facility of inbuilt CTs, trip indication , test facility , protection of thermal overload , single phasing current unbalance , phase sequence , locked rotor, earth fault under corrent. Cat Part No MPR303BB080 of L&T or equivalent makes, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing motor protection relay suitable for 25 HP submersible pump set model No MPR300 thermal overload relay range 32-38 Amps, auxillary supply voltage 110 volt AC having the facility of inbuilt CTs, trip indication , test facility , protection of thermal overload , single phasing current unbalance , phase sequence , locked rotor, earth fault under corrent. Cat Part No MPR305BB320 of L&T or equivalent makes , complete all as specified and directed by Engineer-in-Charge.

Supply and fixing single phase preventor relay operating 415 volts, 50 Hz with and including timer SPz5 SPPR+ timer 415 volts cat part No XM818090000 of L&T or equivalent make complete all as specified and as directed by Engineer-in-Charge

Supply and fixing LT Overhead lines on existing poles with XLPE Insulated AB Cable 3-Core x 95 Sqmm + 1 core x 70 Sqmm phase cores twisted around aluminium alloy insulated messenger conductor conforming to IS : 14255 including identification of phase by Ridges provided on the insulation of Phase conductors : 1 ridge for the 1st Phase, 2 Ridges for the 2nd Phase and 3 Ridges for the 3rd Phase and 4 Ridges for Neutral including accessories like Anchor Clamp, Suspension Clamp, Line Connector, service clamp, insulation piercing connectors, (IPC for Tap from Bare lines ) Dead End, Suspension clamp, I Hook etc including taking down existing ACSR conductor, complete all as specified and directed by Engr-In-Charge

Supply and fixing LT Overhead lines on existing poles with XLPE Insulated AB Cable 3-Core x 50 Sqmm + 1 core x 35 Sqmm phase cores twisted around aluminium alloy insulated messenger conductor conforming to IS : 14255 including identification of phase by Ridges provided on the insulation of Phase conductors : 1 ridge for the 1st Phase, 2 Ridges for the 2nd Phase and 3 Ridges for the 3rd Phase and 4 Ridges for Neutral including accessories like Anchor Clamp, Suspension Clamp, Line Connector, service clamp, insulation piercing connectors, (IPC) for Tap from Bare lines ) Dead End, Suspension clamp, I Hook etc including taking down existing ACSR conductor, complete all as specified and directed by Engr-In-Charge

Supply and fixing LT Overhead lines on existing poles with XLPE Insulated AB Cable 3-Core x35 Sqmm + 1 core x 25 Sqmm phase cores twisted around aluminium alloy insulated messenger conductor conforming to IS : 14255 including identification of phase by Ridges provided on the insulation of Phase conductors : 1 ridge for the 1st Phase, 2 Ridges for the 2nd Phase and 3 Ridges for the 3rd Phase and 4 Ridges for Neutral including accessories like Anchor Clamp, Suspension Clamp, Line Connector, service clamp, insulation piercing connectors, Insulation piercing connectors (IPC) for Tap from Bare lines ) Dead End, Suspension clamp, I Hook etc including taking down existing ACSR conductor, complete all as specified and directed by Engr-In-Charge

Supply and fixing LT Overhead lines on existing poles with XLPE Insulated AB Cable 1-Core x16 Sqmm + 1 core x 25 Sqmm phase cores twisted around aluminium alloy insulated messenger conductor conforming to IS : 14255 including identification of phase by Ridges provided on the insulation of Phase conductors : 1 ridge for the 1st Phase, 2 Ridges for the 2nd Phase and 3 Ridges for the 3rd Phase and 4 Ridges for Neutral including accessories like Anchor Clamp, Suspension Clamp, Line Connector, service clamp, insulation piercing connectors, (IPC) for Tap from Bare lines ) Dead End, Suspension clamp, I Hook etc including taking down existing ACSR conductor, complete all as specified and directed by Engr-In-Charge

Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the GI wire 4 mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering , perforated at bottom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filling with fixing arrangement, funnel wire mesh and earth work in soft soil returning filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI wire of size 4 mm dia with protection pipe of 15mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by 25%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

M&L Stay assembly complete with accessories as shown in electric plate No. 1 and including loop type insulator white brown or green with over all dimensions 65x90mm, clearance of hole 16mm complete all as specified.

Supply and fixing steel tubular swaged pole with cast iron base plate finial tapper plug, bolts nuts and screws and specified type 410-SP-31 ( 9 Mtr long) in truly vertical position 1.5 m length of pole above ground level shall be painted with two coats of synthetic enamel paint in strips of 30 cm width, black and yellow alternatively and painting with two coats of aluminum paint over a coat of red oxide primer on rest part of pole and its connected parts complete all as specified laying GI pipe light grade for cable protection and fixing to existing pole with flat iron clamp 25x3mm including nuts bolts and washers etc complete of 40mm dia including taking out old unserviceable pole complete all as directed by Engr-in-Charge

Supply and fixing and testing fluorescent security light/street lights of LED 45 Watt security light Energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and impact resistance of IK07 complete with including suitable wire 2.5 sqmm copper conductor from junction box to light fitting in non metallic PVC conduit and 1.20m long bracket using 40mm dia GI pipe light grade of required bend and shape , complete all as directed by EIC. Make Havells Cat Part No LHETAXU7PN6J045 or equivalent/CROMPTON GREAVES/GE.

Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Excavation in trenches beyond 1.5 m wide and n.exc. 3 m deep for foundation of poles/stay etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in depth.

Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point.

M&L Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified.

M&L Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all ad specified.

M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete including necessary form workcomplete all as specified.

M&L Plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in coping including necessary form work etc complete all as specified.

Supply laying connecting and testing 1100 volt graded heavy duty XLPE cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 35 Sqmm normal cross section 4.0 core including suitable size lugs laid in trenches fixed to pole or passing through pipes incl all necessary clamps nuts, bolts and washers and remove unsv cable complete all as specified.

M/S AK ENTERPRISES