REPR TO CIGI PIPELIN INCL ATTEND PER DAY COMPLNT CLEANING OF OHT REPR WATERLEVEL INDICATOR CONTROL PANLS TUBEWELL STARTR MAINT AUTOMATION PANELS IMPROVEMENT OF EM INSTALLN AND CONNC ITEMS AT BHADORIYA AND DHANGU MILITERY COMPX UNDER GE S PATHANKOT

Amount

M&L for rectification of existing defective run lead joints including burning and removing the old defective lead joints and providing new lead joints with all required materials and testing the joints for leakages for the following sizes of CI/DI pipes complete all as directed (Note:Earth work shall be measured separately)

80 mm dia

100 mm dia

150 mm dia

200 mm dia

Supply and replace sluice valve spindle made out of EN-8 steel with check nut made out of brass/ bronze material including replacing perished gland packing, rubber gasket, bolts and nuts suitable for the following sizes of sluice valves all as directed.

80 mm dia sluice valve

100 mm dia sluice valve

150 mm dia sluice valve

200 mm dia sluice valve

S&F in replacement for Cl sluice valve, non-rising type conforming to IS-14846, sutiable for 200 mm bore pipe consisting of SS spindle as per IS 6603, Cast iron Body, Dome & Wedge as per IS 210, greasy jute type gland packing, fasteners as per IS 1367, Natural rubber gasket, CI manual hand wheel etc complete double end flanged and drilled, of Class PN-1.6 ( ISI marked) including all jointing materials such as rubber gasket insertion sheet nut ,bolts and washers etc complete all as specified and directed.

All as per above item 11 but 150 mm dia

All as per above item 11 but 100 mm dia

All as per above item 11 but 80 mm dia

M&L for CI pipe special of class 'A' and 'B' like tee's bend sockets, collar's of jointing coupling etc of any type(flanged or socket/spigot type )all as specified or new position with the help of connecting pieces for sizes upto 200 mm dia CI pipe line all as directed

M/L for replacing unserviceable cast iron pipe with spigot & socketed ends centrifugally cast class LA 150 mm bore ISI marked suitable for lead joint in any length laid in trenches complete all as specified and directed by Engr-in-Charge. (ExcavationC & lead joints shall be measured and paid separately).

200 mm dia

150 mm dia

100 mm dia

80 mm dia

S&F in replacement for Cl sluice valve, non-rising type conforming to IS-14846, sutiable for 200 mm bore pipe consisting of SS spindle as per IS 6603, Cast iron Body, Dome & Wedge as per IS 210, greasy jute type gland packing, fasteners as per IS 1367, Natural rubber gasket, CI manual hand wheel etc complete double end flanged and drilled, of Class PN-1.0 ( ISI marked) including all jointing materials such as rubber gasket insertion sheet nut ,bolts and washers etc complete all as specified and directed.

All as per above item 21 but 150 mm dia but PN 1.0

All as per above item 21 but 100 mm dia but PN 1.0

All as per above item 21 80 mm dia but PN 1.0

Supply, Fixing, Testing connecting air release valve of size 80 mm dia with 2 air outlet Kinetic design with isolating valve as per IS 14845 including dismantling of unserviceable Air release valve on 150 to 200 mm dia CI/DI pipeline all as specified and as directed.

M&L for MS hardware like MS sheet for valve chamber covers, duct covers, angle iron bolts/ nuts/ clamps etc incl dismantling old one. (The rate quoted deemed to be inclusive of CC for coping/ grouting of angle iron along with PCC etc complete)

Supply and fix gun metal gate valve with iron wheel head screwed both ends for iron pipe of size including dismantling old one.

20 mm dia bore

25 mm dia bore

40 mm dia bore

50 mm dia bore

S&F in repair High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches/ on floor/ walls etc complete all as directed including dismantling old defective pipe lines. Note: The rate quoted deemed to be inclusive of all fittings necessary for fixing the pipe to GI pipes wherever required.

20 mm dia

25 mm dia

40 mm dia

50 mm dia

Taking up and down old/unservicable GI tubing with fittings of the following sizes complete all as specified and directed. (Earth work will be measured and paid under respective items of sch 'A').

15 mm dia bore

20 mm dia bore

25 mm dia bore

40 mm dia bore

50 mm dia bore

80 mm dia bore

Laying only/ Refixing only GI tubing including fittings such as bends, elbows sockets, unions etc as required for the following sizes complete all as specified and directed.

15 mm dia bore

20 mm dia bore

25 mm dia bore

40 mm dia bore

50 mm dia bore

80 mm dia bore

Supply and lay in trenches/ on roof/ on wall/ steel water tubing galvanised medium grade with all fittings of sizes incl dismantling old one

15 mm dia bore

20 mm dia bore

25 mm dia bore

40 mm dia bore

50 mm dia bore

80 mm dia bore

Laying / Refixing only CI pipe line of bore 200mm dia obtained against items No 17.

Laying / Refixing only CI pipe line of bore 150mm dia obtained against items No 18.

Laying / Refixing only CI pipe line of bore 100mm dia obtained against items No 19.

Laying / Refixing only CI pipe line of bore 80mm dia obtained against items No 20.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying pipes or foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n.exc 10sqm on plan and n.exc 1.5m in depth and getting out in any type of soil.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm in any type of soil.

Removing excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

M/L for carrying out physical, chemical & Bacteriological analysis all as per IS 10500:2012 for Drinking water sample of the Fresh water Pump Houses at various locations from approved laboratory .Note : The rate quoted deemed to inclusive of collecting water sample in Sterilised bottle/PVC container & submitting the same for testing.

M&L for attending break down of pipe line bursting/ cracks including excavation in hard/ dense soil with the use of Earthmoving machinery/ labour and taking out old CI /GI/MS defective/ misaligned water pipe line of size 200/150/100/80 mm dia bore carefully after discon-nection of joints to a length up to 8 mtr and create bund with excavated earth and dewatering / bailing out water complete with diesel engine driven pump set and positioning the pipe line after repairs, returning filling and removal of surplus soil / excavated material with the help of excavator / proclainer all as directed by Engineer-in-Charge. NOTE : (a) M/L for Lead Joints/ spares / CI /GI specials will be measured and paid separately. (b) M/L for CI / GI/MS pipe, Specials, lead joints etc will be measured and paid separately under relevant Schedule Items. (c) The rate is deemed to include Cost for tool and plant and transportation required for attending the repair work. (d) Disconnecting / dismantling/ cutting the existingpipe line is included in the quoted rate. (e) The rate is inclusive of earth work complete including returning & refilling in any type of strata complete. (f) The breakdown shall be attended within 4 Hrs of intimation round the clock and time of restoration shall be maximum of 8 Hours. The additional manpower required to complete the job in quoted rate is deemed to be included in the quoted.

Repair to GI pipe lines of size 15 to 25 mm bore dia and repair to leaked joints of pipe line complete including replacement of GI fitting i.e union,nipple & sockets if required including excvation and taking up & down required cutting & threading refixing in position in trenches & all as directed.

All as per above item 67 but size 40 to 50 MM bore.

Dismantling of old U/S valve pit of size 120x120x90 Cm ( internal dimensions of the chamber) including and removing the debris at a distance not exceeding 50 Mtr and M/L for brick massonary with cement mortar with 1: 6 , 23 cm and flush pointing externaly work proceeds in the same mortar complete ( using 30% old bricks & 70% New bricks) complete with the following specifications and as directed by Engr-in-Charge. Note :-(i) 10mm thick plaster internally in CM 1:6.(ii) Flooring 40mm thick in PCC 1:2:4 type B-1 over 75mm thick hard core of guage not exc 63mm thick. (iii) Angle iron frame 40X40X6mm thick for cover and mild steel 3mm thick cover with locking arrangement,handle and necessary hinges etc, (iv) PCC 1:3:6 type C-2 100mm thick in foundation .(v) Two coat of synthetic enamelled paint to cover internally and externally over a paint of Red Oxide primer.

All as per above item 69 but of size 100x100x105 cm

All as per above item 69 but of size 90x90x105 cm

All as per above item 69 but of size 60x60x60 cm

Repairing to damaged valve pit of of any size like repairing the brick machinary, plastering. changing of iron frame, handles, hinges, PCC etcs wherever necessary all completed including painting of the cover with two coats of synthetic enamel paint over one coat of red oxide both side or all as directed.

Supply and fixing in repair Rubber gasket joint suitable for 200 mm bore cast iron/DI pipes all as specified and directed.

Supply and fixing in repair Rubber gasket joint suitable for 150 mm bore cast iron/DI pipes all as specified and directed.

Supply and fixing in repair Rubber gasket joint suitable for 80 mm bore cast iron/DI pipes all as specified and directed.

Material and labour PCC 1:4:8 type -D2 using 40mm graded aggregate in fdn filling and mass complete for pipe line supports or any indicated position all as specified and directed by Engr-in-charge.

Plain cement concrete (1:3:6) type C-2 (Using 40 mm graded stone aggregate) as in foundation filling and mass concrete for stay complete all as specified

Plain cement concrete (1:2:4) type B-2 (Using 20 mm graded stone aggregate) for foundation coping complete all as specified

Supply only (Calcium based granular disinfectant for water treatment, more stable than Chlorine Gas, and stronger than bleachingpowder, and sodium Hypochlorite) packing in 45 kg drum with chlorine content not less than 65 % for maintining residual chlorine between 1 to 2 PPM at supply end and less than 0.5 PPM at user end all as directed and specified. Note: The Contractor shall submit the test certificate from OEM before claiming for payment.

Dismentling old feeder pillar & Supply, installing, testing and commissioning of LT feeder pillar box factory made cubicle outdoor type, fabricated out of 3.00 mm thick CRCA sheet floor mounted with angle iron base frame made of 40 x 40 x 6mm , 50 cm height, floor mounted duly bolts and nuts grouted, dust and vermine proof, suitable for voltage 415 V 3 Phase 4 wire ,Square copper bus bar Chamber 320 Amp Capacity weather proof, with IP-54 protection, with separate hinge door for each compartment for incoming and outgoing MCCB etc with locking arrangement, with back door openable (Screwed), legs grouted in PCC complete including painting with two coats of epoxy powder paint over a coat of primer complete including supply fixing and making provision of the following :- (a) MCCB 4 pole 415 volts 3 phase 200 Amp 25 KA -01 No (f) LED Indicator RYB -01 Set ( Set of three). Note: The panel shall be as per CPRI certificate. Note : PCC will be measured and paid separately.

M&L for earthing with steel earth plate electrode of size 60x60cmx6mm thick buried directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron strip of size 32x6mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full length of earth plate, GI medium grade pipe 40 mm bore protection pipe upto test point, 20mm dia GI light grade watering pipe with funnel and wire mesh, RCC pit cover of size 300x300x40mm reinforced with XPM having weight not less than 4Kg/sqmm including 6mm thick MS bar handle made to shape, PCC pit with 1:3:6 type C1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, excavation , earth work in any type of soil, removal of excavated soil and returning filling in all as required at site complete all as specified in plate No 3 of SSR Part-I and all as specified or indicated including testing on completion. NOTE :-Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, RCC cover, funnel with watering pipe, GI earth strip upto 7.5 m long for connecting to test point etc. all as required at site for complete earthing).

M&L for cleaning of over head water tank of capacity above 75000 Glns and upto 75000 Glns at 15m to 21 m approx height staging by draining out/bailing out/pumping out the accumulated water at the bottom and removing the complete silt from the sump and depositing and levelling as directed and cleaning the tank with the bleaching powder slurry and wire brush after scrapping the walls and bottom of the tank completely including flushing out inlet/outlet/washout pipes/ valves complete without disturbing the water supply to the area including painting the details of sump capacity, date of cleaning and due date of cleaning on the sump wall and applying one coat of white wash to entire sump internally complete all as directed by Engineer-in-Charge.

All as per Srl item 84 above but upto 50000 gallons complete all as specified and directed.

All as per Srl item 84 above but upto 25000 gallons complete all as specified and directed.

Disconnecting / Removing existing U/S scale type water level indicator and S&F dial type water level indicator suitable for Over Head Storage tank of height 15 m to 21 m staging complete with central movement plate, counter weight, centre dividing wheels, MS/CRCA enclosure, float and connecting control wire system from tank to indicator etc complete grouted in PCC all as directed including testing and commissioning all as directed. Note for item No 84 to 87: The rate quoted inclusive of all safety equipments, T&P for carrying out the repair/working on OH tanks and insurance to persons deployed for cleaning the over head tank. Any unforseen incidents/accidents due to lack of safety norms shall be beared by the Contractor on " No cost basis" without any extra claim from department.

S&F fully oil immeresed star-delta starter of capacity 40 HP, 30 - 50 Amp, AC-3 phase, 415 Volts, 50 Hz, with-over load protector including taking out old unserviceable one all as specified and as directed by the engr-in-charge.

S&F in repair for Cl sluice valve, non-rising type conforming to IS-14846, sutiable for 150 mm bore pipe consisting of SS spindle as per IS 6603, Cast iron Body, Dome & Wedge as per IS 210, greasy jute type gland packing, fasteners as per IS 1367, Natural rubber gasket, CI manual hand wheel etc complete double end flanged and drilled, of Class PN-1.6 ( ISI marked) including all jointing materials such as rubber gasket insertion sheet nut ,bolts and washers etc complete all as specified and directed.

All as per above item 90 but 100 mm dia

All as per above item 90 but but of size 80 mm dia

S&F in repair Double metalised paper and polypropylene technology ( Mixed Dielectric) capacitor cylindrical/box type for power factor correction of 440 V, 50 HZ rated of capacity 3 to 20 KVAR.

M&L for fixing in repair Digital water proof Chlorine meter with the following features :- a) Low detection limit down to 0.01ppm , b) Wide dynamic range of measurement up to 10ppm (use dilution method for 10 to 50ppm).c) Unaffected by sample color or turbidity.d) Automatic electronic calibration.e) Memory stores, tags and recalls up to 15 readings.f) Unique flat surface chlorine electrode.g) Waterproof to IP 57 standard.h) LCD simultaneously displays ppm of Total Chlorine and Temperature plus analog bargraph indicator. J) Complete with meter and flat surface Chlorine electrode, ExTab® reagent tablets (50 tests), protective sensor cap, sample cup with cap, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap.

S&F in repair APFC relay with inbuilt PF meter suitable for 5A CTR suitable for 8 Stage.

S&F in repair single phase preventor relay with timer for auto restart option with protection features against single phasing, phase reversal, phase unbalance etc complete with control wiring all as directed.

Disconnecting the delivery line and providing dummy plate with nut, bolts to avoid water leakages and M&L for taking out vertical turbine pump/ submersible pumpset of any make of capacity 20 HP to 50 HP from the tubewell/borewell carefully complete with column pipe for inspecting the condition of column pipe, pumpset & flat submersible cable etc complete all per site requirement complete all as specified and directed. Note:(i) The cost inclusive of necessary T&P of removing vertical turbine/submersible pumpset carefully without any damages to pump, motor, shaft, column pipe and casing. Any damages shall be beared by the Contractor at his own cost. (ii) The rate inclusive of dismanlting of motor of Vertical turbine pump set.(iii) The M/L for repairs to pumpsets/ column pipe/cable if required & measured and paid separately under relevant Schedule.

Lowering vertical turbine pump /submersible pumpset of any make of capacity 20 HP to 50 HP inside the tubewell/borewell carefully complete with column pipe and other connected parts and including replacement of nut ,bolts, washers, gasket of suitable size all per site requirement and rec-connection with delivery line with nut ,bolts, washers, gasket of suitable size all as specified and directed. Note:(i) The cost inclusive of necessary T&P of lowering vertical turbine/ submersible pumpset carefully without any damages to pump, motor, shaft, column pipe and casing. Any damages shall be beared by the Contractor at his own cost. (ii) The rate inclusive of re-connection of motor of Vertical turbine pump set.

Strip opening of 3 phase AC submersible motor, taking out burnt winding coil complete and re-winding with PVC insulated super quality water proof winding wire including PVC seal (water proof compound) and thrust bearing as per requirement of existing size and make, re-assembling the motor and testing complete of capacity 20 to 50 HP motor.

Taking out worn out bearing/ bush sleeves from the submersible motor of capacity 30 to 50 HP and providing new stainless steel, turning and polishing of bushes complete including checking of allingment complete in all respect all as specified and directed.

S & F in replacement of thrust bearing plate along with disc of motor of capacity 20 HP to 50 HP

S & F in replacement of oil seal of motor of capacity 20 HP to 50 HP.

Dismantling the submersible pumping set bowl assembly/motor of any make for carrying out repair and replacement of worn out parts by strip opening with all parts such as bowl casing, impellers, pump shaft, bushes neck ring etc.and machine work such as welding, turing, re-facing where required and replacing of parts of pump of 4 to 9 stages, size 150mm, of capacity 20 HP to 50 HP capacity. Note: - Spares parts and their fixing shall be paid separately under the respective item of schedule 'A'

S & F in replacement of pump shaft of stainless steel suitable for submersible pump set up to 9 stages including threading, cutting to required size all as specified and directed.

S & F in replacement of gun metal/Stainless Steel impellers of suitable size for bowl assembly of submersible pumping set as per site requirement for suction, discharge and intermediate bowls complete all as specified and directed.

S & F in replacement of cast iron casing suction/discharge/ intermediate with studs.

S & F in replacement of shaft seal of rubber all as specified.

S & F in replacement neck ring of bowls suction/ discharge/ intermediate

S & F in treplacement of gun metal bush of bowls all as specified

S & F in replacement of rubber bushes of bowls assembly of suitable, make and model as per existing for suction and discharge bowls.

S & F in replacemnt of shaft coupling with key stainless steel of suitable sizes, type, make and model as per existing all as specified and directed.

S & F in replacemnt of stainless steel middle/distance bush of suitable size all as required at site and directed.

S & F in replacemnt of stainless steel impeller key all as specified and directed.

S & F in replacement of studs with nuts all as directed.

Supply and fixing of mild steel column pipe coupling 100 mm dia, heavy duty 3.0 Mtr long threaded or flanged all as specified and directed.

Supply and fixing line shaft bearing retainer of gun metal with rubber bushes for column pipe 150 mm dia all as specified and directed.

Cutting and removing worn out threaded portion of mild steel column pipe heavy duty and re threading the same up to specified length to match with socket of size 150 mm dia.

Cutting and removing worn out threaded portion mild steel/stainless steel line shaft of any dia, length and rethreading the same up to specified length to match with existing coupling all as specified and directed.

S & F new bolts,nuts and washers in places of existing worn out/ unserviceable bowl bolts.

S & F Mild steel column pipe for submersible pump set, 125 mm dia, 5 mm thick and 3 mtr. Long duly screwed/welded flanged on both sides with bolts & nuts to mild steel flange including rubber joints all as specified and directed.

Supply and fixing submersible cable 16 Sqmm copper 3 core all as specified and directed.

Suppply only chlorination treatment with high stable Calcium based granular disinfectant for water treatment, more stable than Chlorine Gas, and stronger than bleachingpowder, and sodium Hypochlorite) packing in 45 kg drum complete all as specified and directed.

S&F in repair chlorination dosing system booster pump of capacity S/D size 1"x1"(3 HP) 4 stage with suitable coupling as as directed.

S&F in repair chlorination dosing system motor 3 phase 400/440 volts 50 c/s of 3 HP capacity all as directed.

S&F in repairs submersible pump controller type in sheet enclosure for maximum motor output 30 HP/ 22.5 KW with relay max range 30 to 50 Amps suitable for AC -3 duty, 415 V 50 Hz, 3 Phase AC supply with overload, Single Phasing, Phase reversal, Phase imbalance, auto restart features, IP 54 enclosure complete with Voltmeter & Ammeter, LED indication lamps, push buttons etc complete.

S&F in repair single phase preventor relay with timer for auto restart option with protection features against single phasing, phase reversal, phase unbalance etc complete with control wiring all as directed.

M&L for replacement of existing UNSV schematic diagram with LED laminated display with openable transparent glass covered of main incoming and outgoing elect supply/water supply to various destination and generator supply destination all as directed and specified size of display not less than 1.5x3.0 mtr with all decoration as specified.

M&L for replacement of acrylic sheet diagram of main incoming and outgoing elect supply/water supply to various destination and generator supply destination all as directed and specified size of display not less than 1.0x2.0 mtr with all decoration as specified.

M&L for replacement of acrylic sheet DO and DON'T instructions in Hindi/ Punjabi and English launguage for elect supply installations and water supply installatllations all as specified size of display not less than 2.0x1.0 ft with all decoration as specified.

M&L for replacement of acrylic sheet instructions for pump operation in Hindi/Punjabi all as specified size of display not less than 2.0x1.0 ft with all decoration as specified.

M&L for fire point comprising of the following. (a) CO2 fire extinguisher 4.5 Kg (02 Nos), b) Dry carbon powder (ABC)-05 Kg (02 Nos) ,ceiling Hook,fire beater,sand buckets 9 mtrs capacity-02 Nos ,Showel complete with angle iron stand duly painted with two coats of synthetic enamel paint of approval colour over a coat of red oxide primer incl dismentling old unsv one.

M&L for replacement of electric shock and its management with picture in Hindi/Punjabi all as specified size of display not less than 2.0x1.0 ft with all decoration as specified.

M&L for replacement of Maintenance schedule of Sub stations instructions board on acrylic sheet in Hindi/Punjabi all as specified size of display not less than 3.0x1.5 ft with all decoration as specified.

M&L for replacement of Yearly periodical maint HT Circuit Breakers on acrylic sheet in Hindi/Punjabi all as specified size of display not less than 3.0x1.5 ft with all decoration as specified.

M&L for replacement of DO's & DON’T's for HT circuit breakers on acrylic sheet in Hindi/Punjabi all as specified size of display not less than 3.0x1.5 ft with all decoration as specified.

M & L for laying stone graded coarse aggregate of size 40 mm for foundation filling at sub station two pole/ four pole complete all as specified and directed by engr-in charge.

M & L for laying stone graded coarse aggregate of size 20 mm for foundation filling at sub station two pole/ four pole complete all as specified and directed.

Supply and Fix in replacement existing UNSV tube light fitting with LED 20W inverter batten type fitting 4 feet long aluminium extruded housing,IP-20 ,rated voltage 230 V, 50 hz, charing time 10-12 hours and backup time 04 hours system wattage 20W +/- 10%, system current less than 102 mA, power factor more than 0.95, system lumen efficiency 100lm/watt,CCT 6500K, CRI more than 80, THD less than 30%, driver efficiency more than 85% complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed.

Supply and fix bldg security light fittings with LED security light fittings 60 watt, IP 65 having pressure die cast aluminium alloy housing, prismatic polycarbonate cover complete including making connection with 3 core copper flexible cable of suitable size including galvanised iron pipe bracket 0.90 mtr long of 25 mm dia and fixing with bldg for fixing of street light fitting all as directed. Note: (i) Driver Efficacy – more than 85% ( constrant current driver).(ii)Driver Type – Potted (iii) THD - < 10% (iv)Led Driver Current – less than 750 mA(v) Efficacy of Led Fixtrue – 100 lm/watt ( minimum) (vi) Efficacy of Led Chip – more than 130 lm/watt( Vii) Surge Protection – 4 KV & above as per IEC standard inbuilt in Driver and External SPD 5KV (vii) Working Humidity - 10% to 90% RH (ix) Led Make – Nichia/Philips Lumiled/ Cree /Osram/ Seoul (x) Life – 50,000 hours at 70% lumens(xi) CRI – more than 70 (xii) Lens – Each Led shall be of High Power ( 1 to 3 watt only) with mandatory modular lens. (xiii) Working Temp – 0 to 50 degree C. (xiv) Heat Sink – Pressure die cast aluminium (xv) Junciton Temp – 100 degree C (xvi) Body of Fitting – Pressue Die Cast with company logo / make engraved or embossed in housing LM 6 Grade.(xvii) Impact code – Min IK05 or more (xviii) LM79 report from Third Party ( instead of company in house lab) NABL /UL accredited lab. (xix) LM80 report from Led Manufacturer.(xx) Low/High voltage, reverse polarity, overload and short circuit protection inbuilt in fixtrue.(xxi) MS Clamp fittings with nut bolts and GI bracket, junction box included in the rate.(xxii) Test certificates to be submitted before commencement of work/ claiming for payment .(xxiii) Warranty certificate for minimum 2 years to be submitted from OEM.

M & L for insulation mat 3.3 KV ISI suitable LT panel complete all as specified and as directed.

M & L for insulation mat 11 KV ISI suitable MRS complete all as specified and as directed.

M & L for flex board outdoor type with acrylic sheet mounted on aluminium framed supports box type of size 3"x2" with duly supported by 40 mm size SS tubing round the box incl stand of hight not less than 1.5 mtrs from the gorund level with LED 2x9watt lighting arrangement complete. Note: PCC will be measured & paid seperately

Supply,installation,commissioning and testing of Micro processor Controlled Master Monitoring & operating panel via 1 No ultra sonic sensors ,1 nos OHT ,1 no Tube Well pump set with Automatic Chlorine dosing input pot to operate the water Supply system & act as a user controlled with Visual annunciation panel, & with Cordless Transmitter unit modem satellite Controlled and Non GSM, Non GPRS ,NonRf,Non RTU/iRTU& Non Internet based Net work for SCADA Remote monitoring &operation of complete water supply satellite based net work,The Panel shall be wall /Floor mounting Shall be of suitable size made of 1.5 sqmm CRCA sheet Properly powder coated,consisting of following features to be installed at PUMP HOUSE No 3, Including dismantling old one- a) Main Micro Processor Controller Data Receiver/Transmitter unit Modem satellite based net work and Non GSM, Non GPRS ,Non Rf ,Non RTU/iRTU& Non Internet based Net work b) With SCADA Soft Ware For Mobile Phone for monitoring of water level of Over Head Tank via aneroid mobile phone App non internet based and satellite transmitter modem to monitor water level via 32” LED Screen Receiver modemIn mimic graphic formatNon internet based in future c) With water level indication for 1 Nos OHT from 0% To 100% d) With Mimic graphic display of Size 12” /12” High Intensity Type LED Micro processor based for water level indicator for 1 Nos OHT ,delivery valve open/Close and pump set ON/OFF Running graphical Mimic

e) With Single/Reverse phasing protection & alarming through SMS to five mobile no’s f) Micro controller based complete monitoring system for pump motor three phase Voltage, current, P.F ,Kvarh& KWH g) The micro controller shall send SMS Alert to five mobile no’s in case of any tampering with the automatic pump controllers or the system h) The micro controller shall send SMS Alert to five mobile no’s in case of single phasing, unbalance voltage/ Current or any failure with the pump operation system of pump set j) With automatic chlorine pump operation out put pot k ) With automatic controlling of pump set ON/Off Condition via ultra sonic sensor.

Supply, installation, commissioning and testing of Micro processor Controlled Master Monitoring & operating panel for automatic controlling of 1 No exiting delivery line motorize valve as per pre set timing to operate the Delivery valve automatically with inverter back up of 500 VA in case of power failure& act as a user controlled with Visual annunciation panel, & with Cordless Transmitter/ receiver unit modem satellite based &Non GSM/ GPRS/ Internet/ Rf/ RTU/ iRTU based Net work for SCADA Remote monitoring &operation of complete water supply operation satellite based net work. The Panel shall be wall/ Floor mounting Shall be of suitable size made of 1.5 sqmm CRCA sheet Properly powder coated ,consisting of following features to be installed at OVER HEAD TANK No 3, Including dismantling old one- a) Main Micro Processor Controller Data Receiver/Transmitter unit Modem satellite based And Non GSM/ GPRS/ Internet/ Rf/ RTU/iRTU based net work b) With automatic controlling of delivery line motorize valve via pre set timer. c) With SCADA Soft Ware For Mobile Phone for manually controlling of exiting delivery line motorize valve open/close condition incase of emergency of OHT via mobile phone non internet based

Supply ,installation, testing & Commissioning of Ultra sonic non contact sensor for level monitoring for over head tank with Following specification: Principal:- Ultra sonic sound waves water level sensing O/P Pot :- 4-20 ma/0-20 V Data transmitting out put pot SCADA Operation out put pot Range 8 mts , Including dismantling old one-Make:- U.E.E/Crystal/micro devices/RC

Supply ,installation, testing & Commissioning of high torque motorize valve with gears and adopters self Lubricating Type, Weather proof with protection against , over voltage Jamming of valve and over current protection with manual by-pass arrangement to open/Close the valve on power failure , Including dismantling old one- (a) Valve Size:-150 MM (b) Designed line pressure 10 kg/sq cm (c) Operating angle; - 90 degree (d) Disc Material :- CI with nylon coating (e) Valve type :-Butterfly valve with geared motor on top (f) With Scada modem for manually opening/ Closing of motorize valve via mobile Aneroid software App Close/Open Buttons Non Internet/ Non SMS based ringer tone based in case of emergency

Supply, installation, testing & commissioning of wireless satellite receiver modem and Non internet Non computer, NonRF, Non GPRS and Non GSM ( Non Sim Based) to monitor water level of 3No OHT via 32” LED Screen in flash graphic format with smps power supply with RS 232,RS 485& USB input port with SCADA Operating soft waresatelliteControlled all enclosed in powder coated MS box of suitable sizebe fitted at AGE E/M Office, Including dismantling old one- Make :- Megha Automation/U.E.E /Rockwell Automation

Supply, installation, testing & commissioning of Mobile software App in 3 nos mobile nos With Android based APP for monitoring water level in Mimic Graphic Format of 3 No OHTvia ringer tone based water level communication and NON SMS and NON Internet based with manually controlling of delivery line motorize valve of 3nos OHT at ViaAndroid based APPOpen /Close Button or ON/ OFFButtonin case of emergency with feedback non internet based, Including dismantling old one-Make :- Megha Automation/U.E.E /Rockwell Automation .

Supply only 1.5 Sq mm 03 Core PCV service cable complete all as specifed and directed

Note for all items: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.

vivek and co

M/S SHRI RAM BUILDERS

unison engg enterprises