Construction of new Wheels and Brake shop inside HAL Factory Lucknow

Name of the Individual / Firm / Company: * Mandatory

Type of ownership Pvt. Ltd. / Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

Contact details

Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-

List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.

PAN No.:

Constitution and legal status i.e. Proof of proprietary/Partnership firm or company & authorised person for receiving or signing the documents to be submitted.

Goods and Service Tax ID No.

SAC (Service Accounting code) along with the tax structure.

Income Tax Returns for the last three years

Annual turnover for the last five years.

Plant & Machinery details for the work.

Proposed work completion schedule in the form of bar-chart and monthwise billing plans.

Value of work on hand as on date of submission of tender duly certified by CA also indicating the stipulated period of completion (required for bid capacity also)

Bank Balance Statement for the last thee months.

Overdraft facilities available with the agencies.

Balance sheet for the last five years.

List of supervisor/ technical staff/

Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2025 of the previous financial year [ should not be less than 30% of Amount put to tender]

EMD of Rs.298520.00

Latest Solvency Certificate issued from Nationalized/ scheduled Bank issued and NOT before 12 months from the last date of Tender submission

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]

(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.

(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.

(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Details of person holding the power of Attorney (If different from contact person)

DECLARATION I

DECLARATION II

DECLARATION III

Description of item

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, footings (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m all kinds of soil, complete for foundations, column footing, wall foundation, post holes, etc. including spreading, levelling, watering and well ramming in layers not exc. 25 cm. dewatering if required, dressing the sides, dispoal of excess surplus soil, including cost of all labours, materials, compaction equipments, machineries, transportation, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating, dressing including cost of all labours, materials, compaction equipments, machineries, transportation, and T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing & laying PCC: 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, column, footing, post hole, platform under floors or any other similar description of works including form work, shuttering, compaction, curing, materials, labour, mechanical mixing, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and laying old size brick (having minimum crushing strength 75 Kg/cm²) work in cement mortar in CM 1:6 ( 1 cement : 6 coarse sand), in superstructure above plinth level up to floor V level in all shapes and sizes, walls, ducts, or any description of similar work, including necessary cutting of bricks as required , wastages, straight or curved, work up to any height or depth, cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, material, labour, T&P, curing, wastage, transportation, etc. as required for proper completion of work, as per specification, drawing and as directed by Engineer-in-charge.

Providing & laying Reinforced Cement Concrete 1:1.5:3 (1cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size of Bharatcoop / Dala / Jhansi) in foundation /super structure, beam, column, slab, beam, lintel, chajja, fascia , circular column / structure, etc or any other similar description of works etc including mechanical / manual mixing , wastage, compaction, curing also making contraction joints/grooves, if required with all labour, material, T&P etc all complete as per direction of EIC.

Providing and laying ISI mark TMT Bars 500D or more of make RINL/SAIL/TISCON/, as approved by EIC of any dia as per IS 1786 ( latest version) for all type of R.C.C works, straighting, cut to length, bend to shape required, including cranking, bending spirally or hooping providing spacers / chairs and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it, including cost of all labour, material, loading & unloading, welding, T&P, wastage, transportation etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls/ceiling, of rough / fair faces of brick wall / concerete surface of any description including jambs, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement, including cost of all labour, material, scaffolding, curing, hacking of concrete surfaces, wastages, making joints/grooves (if required), T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling of any description including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge, including cost of all labours, scaffolding, loading, unloading, transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Dismantling/Demolishing brick work in cement mortar of any description manually/ by mechanical means including stacking of serviceable material and depositing to Civil factory store and disposal of unserviceable material within 50 metres lead, including cost of all labours, transportation, loading, unloading, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Dismatling /Demolishing nominal cement concrete [1:3:6 or richer mix (i/c equivalent design mix)] plain/ RCC/ PCC of any description manually/ by mechanical means including disposal of material within 50 metres lead as per direction of EIC, including cost of all labours, materials, scaffolding, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Dismatling / Demolishing nominal cement concrete (1:4:8 or leaner mix) of any description, manually/ by mechanical means including disposal of material within 50 metres lead as per direction of EIC, including cost of all labours, materials, scaffolding and T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Taking out doors, windows and clerestory window shutters of any description of area 3 sq. metres and below including stacking within 50 metres lead and depositing to Civil Factory store, including the cost of all materials, labour, transportation, loading, unloading, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing, and as directed by Engineer-in-charge.

Dismantling old plaster/tile or skirting of any description at any height raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead, cost of all labours, materials, transportation, scaffolding, T&P etc., all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and fixing Powder Coated Aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required, thickness of aluminium section shall be 1.5 - 2.00 mm including cleat angle, Aluminium snap beading for glazing / paneling C.P. brass / SS stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading, etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and fixing powder coated Aluminium (minimum thickness of powder coating 50 micron ) work for shutters of doors, windows & ventilators including hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides, Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required thickness of aluminium section shall be 1.5 - 2.00mm including cleat angle, Aluminium snap beading for glazing / paneling C.P. brass / SS stainless steel screws, including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

Providing and fixing glazing in Aluminium door, window, ventilator shutters and partitions etc, of 4-5 mm thick (average) and make ofModigaurd/Saintgobain or as approved by EIC, with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing and the directions of engineer-in-charge (Cost of Aluminium snap beading shall be paid in basic item) with float glass panes of 5.0 mm avg thickness (weight not less than 12.50 kg / sqm) including cutting straight or curved as per site requirement, rounding off edges jointing with steel screws as per architectural drawings and including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading, etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing, and as directed by Engineer-in-charge.

Supplying and fixing in position of 04 mm thick ACP sheet in Alu. partition, Alu.doors etc of make Alstone/ Alkor/ Aludecor/ Alstrong/Eurobond or as approved by EIC, finest quality two layers of Aluminium skins. Pre coated and thermally bonded with non-toxic polyethylene core, fire resistant interior grade, dust and corrosion resistant, skin thickness 0.5mm with tolerence in width & length as +/- 02mm and in thickness as +/- 0.2mm or as per manufacturer including all cutting as per site requirement, fixing with all other material, T & P, labour, cutting, wastage, cartage, transportation, loading, unloading etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and fixing aluminium powder coated tower bolts 250 mm x 10mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws, including materials, labour, T&P etc, as required for proper completion of the work, all complete as per specifications, and as directed by Engineer-in-Charge.

Providing and fixing aluminium powder coated tower bolts 300 mm x 10mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws, including materials, labour, T&P etc, as required for proper completion of the work, all complete as per specifications, and as directed by Engineer-in-Charge.

Providing and fixing Aluminium sliding door bolts 250 x 16 mm, ISI marked powder coated (powder coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws, including cost of labour, materials, T&P etc, as required for proper completion of the work, all complete as per specifications, and as directed by Engineer-in-Charge.

Providing and fixing aluminium powder coated handles 125 mm, ISI marked powder coated (powder coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws, including, cost of labour, materials, T&P etc, as required for proper completion of the work, all complete as per specifications, and as directed by Engineer-in-Charge.

Providing and fixing twin rubber stopper aluminium hanging floor door stopper, ISI marked, powder coated (powder coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws, including cost of labour, materials, T&P etc. as required for proper completion of the work, all complete as per specifications and as directed by Engineer-in-Charge.

Providing and fixing IS : 12817 marked stainless steel butt hinges (100x58x1.90mm) with Stainless Steel screws etc. including cost of labour, materials, transportation, T&P etc, as required for proper completion of the work, all complete as per specifications and as directed by Engineer-in-Charge.

Providing and fixing double action heavy duty hydraulic floor spring of approved brand and manufacture like Godrej/ Amar/Everest as approved by EIC, conforming to IS : 6315, plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box and with stainless steel cover plate minimum 1.25 mm thickness, cost of labour, materials, T&P etc., required for proper completion of the work, all complete as per specifications and as directed by Engineer-in-Charge.

Providing and fixing Aluminium extruded section body tubular type universal hydraulic door closer of approved brand and manufacture like Godrej/ Amar/Everest as approved by EIC, (along with ISI mark, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws, including cost of materials, labour, T&P etc, as required for proper completion of the work, all complete as per specifications, drawings and as directed by Engineer-in-Charge.

Providing and fixing Vertical venetian blinds of 75/ 100mm width of approved colour & texture/pattern (approved designs printed / plain) including its hardware mechanism of repuated manufacturer such as Vista, Aerolux, MAC or as approved by EIC, all complete with material, fixing, fixing accessories, making holes in concrete / brick wall, making good, wastage, including cost of all materials, labours, T & P, cutting wastages, making provisions for hardware fittings, pattern, design, colour etc. as required for proper completion of the work, all complete as per specifications, drawings and as directed by Engineer-in-Charge. (sample is to be approved before procurement from reputed manufacture)

Providing and laying glazed vitrified tile polished / matt finish of size ( 600 X1200 )mm or as per site requirement of shade, size & of make Kajaria/ Johnsons/ Nitco/ Somany, as approved by EIC, in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc, The tiles must be cut with the zero chipping diamond cutter only, laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily including cost of all labours, materials, scaffolding and T&P etc., all complete at any floor as per specification, drawing and as directed by Engineer in charge. (Note- Prior Sample shall be approved by the EIC).

Providing and fixing tiled false ceiling of approved make Armstrong/ Knauff or as approved by EIC, of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24 x 24 x 0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T sections shall be pre-painted with polyester paint, including cost of all material, labour, cutting, wastages, transportation, cartages, loading, unloading, T&P etc, as required for proper completion of the work, all complete at any height/floor, as per specification, drawing and as directed by Engineer-in-charge. (Note- Prior Sample shall be approved by the EIC).

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by EIC, including cost of all material, labour, cutting, wastages, transportation, cartages, loading, unloading, T&P etc, as required for proper completion of the work, all complete at any height/floor, as per specification, drawing and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge, including cost of all material, labour, cutting, wastages, transportation, cartages, loading, unloading, T&P etc, as required for proper completion of the work, all complete at any height/floor, as per specification, drawing and as directed by Engineer-in-charge.

Providing and applying white cement based putty of make JK/Birla/ Asian / Berger as approved by EIC, of average thickness 01 mm, over the plastered wall surface to prepare the surface even and smooth, including cost of all labours, materials, rubbing, sand papering, finishing the corners, matching with the existing surface, scaffolding, transportation, loading, unloading, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing & applying two or more coats with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives of first quality of approved shade and make like apex ultima of Asian /weather coat long life of Berger / weather shield max of ICI etc including one coat of primer , preparation of surfaces, by brooming down, removal of flakes , oil ,grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing rubbish outside in dustbins removal of all splashes and cleaning glass and joinery,including cost of all labours, materials, rubbing, sand papering, finishing the corners, matching with the existing surface, scaffolding, transportation, loading, unloading, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Providing & applying two coats or more of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved make & shade such as Asian/Berger/ICI as approved by EIC, to walls of any description at any height/depth of required shade and colour all complete to achieve even shade and colourn new/old work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre, including preparation of surface by sand papering, filling holes, cracks with birla putty stopping ,removing oil/smudge marks spreading and removing coverings to doors, windows, floors, fittings to protect from splashes, removing and replacing furniture's, moveable cupboards, chicks, blinds, washing floors, cleaning glass, joinery, leaving the premises clean neat and tidy including disposing rubbish outside in dustbins, cost of all labours, materials, loading, unloading, scaffolding, wastages, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material)

Providing and applying two coats of synthetic enamel paint on wall / wood/ steel surface of any description, any girth at any height with first quality synthetic enamel paint of make Asian / Shalimar / Berger as approved by EIC, of approved tint and shade over a coat of suitable primer for respective surface primer of above brand, including preparing of surface by sand papering, removing oil/ smudge marks, filling, touching, including cost of all labours, materials, scaffolding, transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before precurement of material).

Providing, Fabricating & fixing of Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, welding, cut to shape, bending, fixing in position and applying a priming coat of approved steel primer all complete, MS Roof Truss (framed), purlins, crain, gantries, rails & fasteners and heavy bracket framing beam, Tee, angle, channel, tubular, rectangular, square, flat, (all required sections including distance pieces, cleats, base plates, nut bolts, tie road, foundation bolt etc), including cost of all labour, material, T&P, erection, wastages, transportation, loading, unloading, cartages, etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of 0.56 mm thick alloy of make TATA/ Jindal or as approved by EIC, IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer, including cost of all labours, materials, wastages, scaffolding, sundries, T&P etc, all complete at any height as per specification, drawing and as directed by Engineer in charge. (Cost of truss / frame work shall be paid separately). 0.56 mm, Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width 1092 mm, cover width 1000mm.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of size 300x450 or as required at site & make Kajaria/ Johnsons/ Nitco/ Somany or as approved by EIC, in all colours, shades burgundy, bottle green, black, in skirting, risers of steps and dados, over 12 mm (average) thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade, cost of all labours, materials, scaffolding, curing, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before precurement of material).

Removal of Excavated earth, Lime, moorum, building rubbish lead upto 2.00 Km by mechanical transport including cost of all labour, materials, loading, unloading, T&P, tranportation etc, as required for proper completion of the work, as per specification, drawing and as directed by Engineer-in-charge.

Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc, including cutting, rubbing, curing, and polishing of edges to give high gloss finish, chamfering complete at all levels, joints chamfered in turning point and pointing the joints with white cement (1:2) using marble dust or suitable filler with admixture of pigment to match with shade of granite etc, including cost of all materials, labours, scaffoldings, T & P, grouting, wastages, circular/ oval cutting/ general cutting as per requirement etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before precurement of material)

Providing edge moulding to 18 mm thick granite work counters, Vanities door, window, sill etc., including machine polishing to edge to give high gloss finish cost of all materials, labours, scaffoldings, T&P, wastages, etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing, and as directed by Engineer-in-charge.

Designing, fabricating, testing, installing and fixing in position Curtain wall /wall panelling with aluminium composite panel cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all level, including cost of all labours, materials, scaffolding, loading, unloading, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing, and as directed by Engineer-in-charge.

Surface dressing of uneven surface not exc.15 cm deep, cutting & filling, including cutting of wild growth, jungle, cutting and uprooting of plants/ wild vegetation etc, also removal of surplus earth, wild growths, plants etc as directed by EIC upto lead of 50 m and lift upto1.5m or part there of including cost of all labours, materials, equipments, machineries, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and fixing 50 micron thick (or as per manufacture specification) designer film of make Garware/ Orchid or as approved by EIC of required pattern, self adhesive type fixed on the glasses of doors, windows and partition including cleaning of surface and preparation of surface to receive the film including cutting to required shape and size, laying properly to avoid any air bubble, leaving the suface neat and clean, cost of all material, labour, cutting, wastages, T&P etc, as required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer-in-charge.

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement, including cost of all labours, materials, equipments, machineries, T&P, welding, erection, etc, as required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer-in-charge.

Providing and laying cement concrete- 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) in retaining walls, return walls, flooring, approach, platform, plinth protection, walls (any thickness) including attached plasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, compaction, curing, materials, labour, mechanical/manual mixing, making contraction joints/grooves (if required), wastages, transportation, shuttering, finishing, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and laying brick work half brick thick walls in cement mortar 1:4 ( 1 cement : 4 Coarse sand) with bricks of sub Class ‘A’ with minimum average crushing strength 75 kg/cm² using well burnt locally available bricks, laid straight or curved on plan not exceeding 6.00m, mean radius including placing of reinforcement at every fourth layer, including cost of all labours, materials, scaffolding, necessary cutting of bricks, wastage, straight or curved work, loading, unloading, transportation, curing, raking out joints up to 1 cm depth as the work proceeds, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and laying PVC flooring 02mm thick heavy duty homoeneous, industrial use and flexible non directional, muiti - colour polymer chips, PUR surface protection, homogeneous flooring rolls in width of 02 mtr and continuous length of 20 mtrs laid in floors/ skirtings, surface electrical resistance and in approved design and shade, as per the design of approved make such as adventus series of wonder floor/ Armstrong/ Responsive SPICS RQ brand or as approved by EIC, make conforming to IS Standards in roll form with suitable adhesive of make Fevicol and joints thermo welded to form seam less surface, including removing of existing PVC/ESD/ or any other description flooring and deposited the same as directed lace, cleaning of surface and preparation of surface to receive the floor, filing of minor pits / holes if any with Birlaputty/cement mortar, including cost of all material , labour,cutting wastages, T&P etc, as required for proper completion of the work, all complete at any height/floor, as per specification, drawing and as directed by Engineer-in-charge.

Providing, Fabricating & fixing of Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses, Hot finished welded type tubes etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including cutting, bending, grinding, welding and bolted with special shaped washers etc. complete including cost of all labour, material, T&P, erection, wastages, transportation, loading, unloading, cartages, etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Total (A)

Above