ADDN/ALTN AND SPL REPAIRS TO BUILDING NO. P-156 (WTC), STATIC TANK AT INS HAMLA AND P-10 AT FSB ERANGAL UNDER GE(NW) BHNADUP.

Amount

Taking down cement plaster of any description in any position including racking out joints making key scrubbing down with water etc. and removal of debris out side MD land.

M&L 15mm thick plastering in CM 1:6, on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed.

M & L for 20mm (15+5) thick rendering in Cm 1:4 using WPC @ 2% by weight of cement on brick work or concrete surfaces; surfaces finished even and smooth with out using extra cement complete all as specified Note : Water proofing compound shall be measured & paid seperately.

Supply only integral water proofing compound.

M &L PCC 1:3:6 type C2 75mm thick as in plinth protection finished even and smooth using extra cement compete all as specified.

S&F II nd class Hard Wood plain, solid straight chawkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, completed as specified and directed.

S&F plain framed pannelled shutters of 2nd class HW 35mm thick with panel of 12mm thick ply wood(BWR Quality) and styles as per IS 1003(part-I) all as specified. ISI marked.

M&L for preparation of new wood and wood based surfaes any description, not otherwise described oer 10cm width or girth one coat of pink primer and application of two coats of synthetic enamel paint on new wooden surfaces.

M&L two coats of synthetic enamel paint over one coat of red oxide primer on new steel surface after necessary preparaton of surface over 10 cm in width or girth complete.

S&F MS flot iron as in hold fast and similar work as specified Gde Fe 410-0 or Fe 310-0.

M&L Pcc (1:2:4) type B1 (20mm graded aggrgate) as in coping, lintel bands , hold fast, PCC benching weathering , slightly rounded or chamfered angles and throating etc.including necessary form work complete as specified and directed.

M&L,18 to 20mm thick pre-polished kota stone slab in single piece in jambs and in double piece in cills or single piece in soffits over and including 15mm thick cement mortar 1:4 backing coat jointed with grey cement slurry mixed with pigment to match the shade of slab and necessary edge moulding before fixing of kota stone complete all as specified and directed.

S&F 4mm thick figured glass/pin headed type ordinary quality fixed in aluminium ventilator all as specified & as directed by EIC.

S & F aluminium grill conforming to DG- 102 of Deco Grill or equivalent , (10mm X 5.2mm) thick of approved design or equivalent as approved by Accepting Officer and fixing with and including 'F/U' channel not less than 1.5mm thick complete all as specified and directed.

Supply & Fixing aluminium anodised XPM Jali, 24 gauge with 1.4mm average width of aperature complete all as specified and directed.

Supply only aluminium anodised XPM Jali, 24 gauge with 1.4mm average width of aperature complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single prelami PVC sheet & edges painted to match with prelaminated sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top& bottom rails. MS frame shall be covered with heat moulded plain dark colour PVC 'C 'Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain dark colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail& bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with suitable PVC sheet beading and joined together with solvent cement, etc fixed to frame complete all as spd and directed.

S&F in repairs vitreous china wash down water closet pan (padestal pattern), white complete including seat cover and connection to trap and to flushing pipe, anti syphonic pipe etc., complete all as specifiedand directed.

M&L Wash basin, Vitreous China white (Flat back) 630 x 450mm including brackets,, pinning in ends of brackets or erecting stand including fixing of waste pipe and pillar type etc ( Suppy of pillar tap and waste pipe shall be measured separately) complete all as specified and directed.

S&F in repairs15mm bore pillar taps, cast copper alloy, with capstain heads, chromium plated fancy type screwed down, high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

M&L waste fitting of 32 mm bore, brass, chromium plated for glazed ware wash basin etc

S&F in repairs 15mm bore stop valves/angle cock fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for unions complete all as specified and directed...

M&L Angle cock, cast copper alloy, with wall Flange, chromium plated for iron pipe or for unions of 15mm bore, make JAQUAR code No. LYR-38053 or equivalent of make KOHLER or MARC as approved by the GE,complete all as specified and directed.

S&F 15mm size PVC connection with PTMT nuts 450mm length complete all as speified and directed.

S/FLow density polyethlene (LDPE) pipe of pressure rating 6 Kgf / Sqcm 32mm dia complete all as specified and directed.

S & F cast iron Nahani trap in floors with grating including jointing to waste pipe of 75mm dia in cement concrete type B1 (1:2:4) fixed in repairs.

M&L PVC valveless, syphonic action type, 10 ltrs cap flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 32mm dia and fixed in repairs complete all as specified and directed.

M&L Stainless steel floor trap, plain with grating removeable & refixable type including jointing with solvent cement 75mm dia of outlet complete all as specified and directed.

S&F 40mm bore high density polythene pipes (HDPE) of pressure rating 6 Kg / cm2 fixed complete to walls, ceiling or in floors etc.

M&L Mirror in repairs fancy type round / square pattern exceeding 0.4 Sqm but not exceeding 0.6 Sqm complete all as specified and directed.

M&L Brass CP fancy type Single Lever Wall Mixer with provision of Hand shower for mixing hot & cold water screwed down for iron pipe of 15mm bore, make JAQUAR : Code FUS-29119 or equivalent of make KOHLER or MARC as approved by the GE, complete all as specified and directed.

S&F 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed for iron pipe or for brass ferrule, Make Jaquar Code No CQT-23037 or equivalent of make KOHLER or MARC as approved by the GE, complete all as specified and directed.

S&F in repair CP Tubular towel rail with hook 20 mm dia 600mm long between flanges of fixed with and including chromium plated brass screws and wooden/plastic screws. complete all as specified and directed.

S&F stainless steel soap dishes approximate size 160mm x 160mm x90mm as complete as specified as directed by Engineer-in-Charge.

M&L Glass Assembly sheet glass consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracked guard and railing 60cm long complete all as specified and directed..

M&L Hat and coat hooks, solid body of aluminium, 175mm to 250mm long and fixed complete all as specified and directed.

S&F chromium plated shower roses 125mm size with or without swivel joint including fixing to steel pipe or union etc.

Taking up or down steel tubing 15mm bore of pipe and connections including cleaning for refixing etc as required complete all as specified and directed..

All as per item above but 20mm bore of pipe complete all as specified and directed..

M&L tubes medium grade galvanised, with all fittings and fixed complete to walls or ceiling or laid in floors 15mm bore dia.

All as per item no 47 here-in-before but 20mm bore dia complete all as specified and directed.

S&F gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed bore of 20 mm in repairs complete all as specified and directed.

M&L Rotational moulded polyethylene water storage tanks (Cylindrical verticval with closed top) hoisted & fixed in position in repairs all as specified of 2000 ltrs capacity complete all as specified and directed..

M&L in repairs Ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete .25mm dia complete all as specified and directed.

M&L Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) 25mm bore dia complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed.

Demolition of cement concrete in ground floor / paving not exceeding 15Cm thick below or above GL unreinforced complete all as specified .

M&L PCC 20mm thick type B0, 1 : 2 : 4 (12.5mm graded aggregate) in sub flooring complete all as specified and directed..

M&L PCC 30mm thick type B0, 1 : 2 : 4 (12.5 mm graded aggregate) in sub flooring complete all as specified and directed..

M&L vitrified ceramic tiles 10mm thick light shade (Square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over and including provision of cement screed bedding layer 20 mm thick in CM 1 : 4 etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

All as above but over and including provision of screed bedding 10mm thick in CM 1 : 3 in vertical surface complete all as specified and directed.

M&L non-skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry over and including provision of bedding layer 15 mm thick in CM 1 : 4 complete all as specified and directed.

M&L glazed ceramic jointless coloured tiles in vertical surface exceeding 0.18 sqm but not exceeding 0.38 sqm set and jointed in neat cement slurry over and including provision of bedding layer 10mm thick in CM 1 : 3 complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (40 mm graded aggregate ) in foundations, filling and mass concrete complete all as specified and directed.

Material and Labour glazed coloured ceramic tiles 300 x 200 x 6mm thick as in dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement including 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed.

M&L for for preparation of new or old plastered surfaces of walls, chajjas, slab projections and applying two coats of 100% anti fungal acrylic emulsion paint in approved shade over a coat of primer including necessary scaffolding complete all as specified and as directed.

M&L for preparation of old plastered surfaces on walls, chajjas, scrapping ,washing down the old surface and applying one coat of 100% anti fungal weather resistant acrylic paint in approved shade and as per manufacturer's instructions including necessary scaffolding complete all as specified and as directed.

M&L for three coats of white wash on newly plastered surfaces including preparation complete all as specified and directed.

M&L for one coat of white wash on old plastered surfaces including preparation complete all as specified and directed.

Chipping, removing carefully loose/damaged concrete incl plastering (total thickness upto 60mm ) from surfaces of RCC members, upto height 15 m above ground level in any location by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land complete all as specified and directed. Note : 1) Hard concrete shall not be removed by force )

M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hr between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)

M&L for Anticorrosive Treatment to Reinforcement using IPNET-RB of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed . Note :- Mode of measurement: superficial area of concrete will be measured.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application complete all as specified and directed.

M&L for providing Polymer Bonding Agent of Make M/s. Krishna Conchem (MONOBOND) OR Fosroc (NITOBOND-SBR) OR equivalent brand of Dr. Fixit,as approved by the GE followed by flexible polymer based putty ( 1cement: 1.2 finesand :20% polymer by weight of cement : water as required ) on cracks after cutting the cracks to a 'V' shaped groove upto 10 mm wide and 10 mm deep in structural RCC members , finished with spatula etc. complete all as specified and directed.

M&L for casting & repairing of excessively damaged distressed RCC members (exceeding 40mm in thikness) with prebatched, prepacked, single component ready to use microconcrete from M/s. Krishna Conchem (Molith MC) or equivalent of Dr. Fixit as approved by GE at any level and at any lead or lift as directed including prefabricated water tight formwork, centering, scaffolding, also including mixing , laying, levelling, finishing, curing etc as per manufacturer's specifications complete all as specified and directed.(Note : Reinforcement only shall be measured and paid separately).

M&L for building up the profile of structural members using polymer modified from M/s Krishna Conchem (Molith PMM) OR Polymer mortar HB of Dr. Fixit, exceeding 20mm thick and not exceeding 40mm thick in two layers each of equal thickness including levelling, profilling etc complete all as specified and directed.

M&L for anchoring & welding reinforcement bar in existing RCC member by providing holes of minimum 10d depth for bars upto 16 mm dia and grouting in position with locfix (fosroc), including drilling of holes, cleaning etc. complete all as specified and directed, Note:-reinforcement will be measured and paid for separately.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed.

Exavating in trenches in Hard / dense soil n. exe 1.5 m wide and n. exe 1.5 m in depth, for foundation etc or for shafts, wells, cess pits, man holes, pier holes etc n exe 10 sq m on plan n exe 1.5 m depth and getting out complete all as specified and directed

Demoltion of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facing, precast concrete articles.

M & L for brick work in sub class 'B' Bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L RCC 1 : 1.5 : 3 type A1 (using 20mm graded stone aggregate) in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as pecified and directed..

S&F Form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work not exceeding 200mm thick( horizontal or sloping) rough finished surface complete all as specified and directed.

M&L form work to edge of concrete RCC slab or RCC band exc 10cm wide but n exc 20 cm wide and fair finished surface complete all as specified and directed.

M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bars

S&F TMT bars 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L 5 mm dia to over upto 10 mm dia in stirrups spacers and binders confirming to TMT bars

M&L rendering 5 mm thick on fair faces of concrete surface of ceiling in CM 1 : 3 and finishing even and smooth without using extra cement complete all as specified and directed..

M & L hard core of broken stone or boulder of guage not exc 63 mm deposited, spread and levelled in layers not exc 15 cm thick watered & rammed to a true surfaces complete all as specified.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregates) 100mm thk. as in sub base,sub floor etc complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-1 (20mm graded agg) as in sub base flooring and similar works finished even & fair without using extra cement.

Chequered cement concrete tile 20CM x 20CM x 25mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over and including cement mortar bedding 20mm thick in CM 1 : 4, 20mm thick complete all as specified and directed.

M&L for PCC 1:4:8 type D2 1:4:8 (40 mm graded aggregate) 75 mm thick, laid in sub base complete.

M&L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes, in CM 1:6 complete all as specified and directed.

M&L WC connector 110 mm PVC SWR for WC complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches bore of pipe 110 mm complete all as specified and directed.

M&L concrete bed to drain pipes including packing under and haunching against the sides in Cement concrete 1 : 4 : 8 type D2 for 110mm dia pipe complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm dia complete all as specified and directed.

S&F PVC (SWR) junction single (single T) with access door bore 110 mm complete all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

M&L of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

Cutting into existing man holes for connecting new drains of 150mm dia pipe and making good two pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 and finished and reforming benching as required complete all as specified and directed.

S&F,structural rolled mild steel Fe 410-00 (Gde E-250) as in roof trusses (frammed), rails and fastenings and heavy bracket framming (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

Refixing and securing iron gate heavy weight of size 10m x 4m approx to the structure with sections mentioned in item no. 101 above through embedding and welding complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified.

M&L Non asbestos fibre cement building boards 4mm thick fixed / inserted to GI frame work complete all as specified and directed.

M&L anodised aluminium snap grid frame work for false ceiling of grid size 605 x 605mm complete all as specified and directed.

M&L Hangers 6 mm dia G I (upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasterners 12.5 mm dia 40 mm long complete all as specified.

M&L weathering boarding, clean sawn, thickness 20mm to 25mm and rebated on thick edge to give 20mm laps and fixed in repairs complete all as specified and directed..

Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged exc 15cm but not exceeding 30cm long of 12mm dia neck bolt complete all as specified and directed.

M&L two coats of oil emulsion distemper to new wood / ceiling surface including preparation complete all as specified and directed..

Labour only for complete removal of existing treatment on walls including washing / rubbing down with water including necessary scaffoldings etc complete all as specified .

M&L for applying 2 coats of white cement based wall care putty on wall, new or old surfaces of any description finished even and smooth complete all as specified and directed.

M&L for two coats of oil bound distemper on newly putty wall surfaces including necessary scaffoldings etc complete all as specified

Taking down chowkhats or frame with shutters (without taking off shutter from the frames) exceeding 1.5 sqm but n exc 4 sqm completed as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutter from the frames not exceeding 1.5 Sq. M each

S&F extruded Powder coated aluminium section as in window, ventilation,door (powder coated 50 micron in blackcolour) with movable, openable or fixed type shutter or any pattern as directed, aluminumsection medium weight of series B or size as directed by the Engr in charge cut to size , jointed toghter including rubber beading and all necessary fitting complete all as specfied and directed (Make: Jindal/Hindalco) Note :- (i) Only aluminum sections measured and paid in this item. (ii) Rate quoted by the contractor shall deemed to be inclusive of all neecssary fittings and fixture such as roller,handle,locks etc (iii) Glass pane and XPM jali measured and paid under supply only rate.

M&L preparing surfaces of wood or wood based materials, any description ends of posts, backs of chowkats, etc and treating with tar or coal tar black paint area tarred exc 0.1 sqm but n exc 0.5 sqm each complete all as specified and directed..

Preparing surfaces of small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats etc area n exsc 0.1 sqm each and treating with tar or coal tar black paint complete all as specified and directed.

M&L Flush shutters 30mm, solid core construction, with partical board core and ply wood face panels, commercial type on both sides covered with decorative face veneer with lippling / frame to match complete all as specified and directed.

S&F 35mm II nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred bends for securing glass etc. size of members of shutters as specified in SSR, Part I, section -8, clause 8.20(a) supplied and fixed to chowkhats.

M&L prelaminated particle board 18/19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancig white lamination, fixed complete all as specified and directed..

M&L prelaminated particle board 12mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancig white lamination, fixed complete all as specified and directed..

S&F Hasp and staple 150mm size, safety type of aluminium with aluminium pin including bolt to hinge plate and fixed with screws complete all as specified.

S&F continuous (piano) hinges mild steel, bright finish or electro-galvanised 40mm width of flaps complete all as specified and directed.

S&F stainless steel butt hinges 100mm size.

S/F 150mm length extruded aluminium alloy handles,fabricated type, anodised.

S&F200 mm length aluminium anodised barrel tower bolt of extruded section.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long.

S&F Aluminium anodised barrel tower bolt of extruded section and fixed 300mm long complete all as specified and directed.

M&L 300mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed complete all as specified and directed..

M&L 150mm long Aluminium alloy body latch, anodised with two levers and fixed complete all as specified and directed..

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring.

M&L 300mm, ordinary rat tail rod pattern springs including roller and roller plate mild steel complete and fixed complete all as specified and directed.

S&F in repairs drapery rod 25mm dia, having corrugated PVC extrusion on eletric resistance welded MS pipe with fancy type 02 Nos brackets for each door/ window etc, complete all as specified and directed Make-Soffio II of Vista or equivalent as approved by the GE.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including similar pattern roof covering complete all as specified and directed.

Dismantling of wrought iron or mild steel work in any description and in any position

M&L rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed

S &F galvalume aluminium zinc coating corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed by Engr-In-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

M&L for 50mm thick Pcc (1:3:6), type C1, using 20mm graded stone aggte as in plinth protection / paving, surfae finished even & smooth without using extra cement complete as specified and directed.

Forming construction Joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick/concrete surfaces in CM 1:4 finished even and fair complete all as specified and directed.

S/F 150mm bore salt glazed stone ware drain pipes laid in trenches and jointed as specfied complete all as specfied and directed.

M&L for concrete in cement concrete 1:3:6 type C2 to bed drain pipes of 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specfied and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n. exc 25cm thick in hard / dense soil complete all as specified and directed.

Demolition of cement concrete un-reinforced not exc 15 cm thick of any description and at any position and removing the debris outside the MD land.

Demolition of Reincorced concrete in any position, manhole covers etc & disposal of subbish off the premises complete all as specified and directed.

M&L precast RCC 1 : 1.5 : 3 type A1 (using 20mm graded stone aggregate) in cover slab and set in CM 1 : 4 including necessary form work.

M&L in repairs PVC(SWR) gully trap 125 / 110mm setting and jointing with solvent cement complete all as specified.

M&L for Providing 4mm thick FRP chajja of approved pattern/shape/size (with sides & front drop etc), colour/pattern as of Mangalore clay tile (the FRP chajjas shall be moulded in gel coat finish, the thickness shall be 4 mm and back patti to be additionally reinforced with core matt, all resins and pigment shall be fully weatherable and UV established, core malt shall be used with GSM for extra thickness, necessary FRP covered metal), chajjas shall be fixed in position with and including 8mm dia and 125mm long split fastener bolts (Shakti or equivalent as approved by the GE) spaced not more than 45cm C/C and also filling the gaps with polysulphide sealant including necessary scaffolding/erection of working platform etc, complete all as specified and directed. Make : M/S Titan Enterprises or Advance FRP or Sintex.

S&F rolled section as in main & cross beam , hip and jack rafter purlins where connected to common rafter and running rails etc complete using Fe-410-0 or Fe-310-0

M & L Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 all as specified and directed.

M&L for Machine pressed precast coloured glazed concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type) any shape and size (as approved by GE) confirming to IS 15658-2006 of 100 mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and sealing the ends using PCC 1:2:4 etc complete.

M & L Sand filling under floors or in foundations including watering and consolidation all as specified and directed.

Removing excavated material, exceeding 1.5 km but not eceeding 10km and depositing where directed outside MD land complete all as specified and directed. in soils out side MD land complete all as specified and directed.

S&F 600mm dia reinforced concrete pipe class NP3 laid and jointed complete with collars all as specified and directed.

M&L Cement concrete ( 1 : 3 : 6 type C-2) bed to drain, bore of pipe 600mm including packing under and haunching agains the sides of pipes after they are laid and tested complete all as specified and directed.

M&L reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate ) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M & L reinforced cement conrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in beams, cantilevers, lintels/DPC over 1.5 m span

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M & L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width type B1 1:2:4 (20mm graded aggregate ) and setting in mortar 1:6, complete

Taking down carefully copper/alumunium point wiring for light, fan, bell, socket or power complete including fittings such as switches, ceiling roses pendents regulators, sockets and tube light fittings etc, removing materials from site or for reuse refixing and making good distrubed surface of wall, floors etc all as specified and directed.

Taking down main switches DBs with sheet metal enclosure 2/4/6/8/12 way SPN/TPN/DBs etc all as specified and directed.

Taking down down ceiling fan/exhaust fan from the position and deposit MES store yard all as specified and directed

M&L for light/fan point wiring complete with 1.5 sqmm PVC insulated unsheathed 1100 volts grade (FRLS) cable stranded copper conductor single core partly concealed in wall through PVC conduit and concealed accessories and partly surface on ceiling, beams and cloumns through casing capimh and accessories of size 20/25mm complete with modular box and plate for fitting mounting switch/sockets regulators with 1.5 sqmm PVC insulated copper conductor earth wire and connected to earth dolly for one light point controlled by one switch complete

All as per item no 167 here-in-before but for one 5 pin socket 5 Amps on same board complete all as specified and directed

All as per item no 167 here-in-before but for one 5 pin socket outlet 05 Amp independent board complete all as specified and directed

All as per item no 167 here-in-before but ceiling/Exhaust fan point controlled by one switch complete all as specified and directed.

All as per item no 167 here-in-beforebut for one bell point controlled by 5 Amps bell Push complete all as specified and directed.

Supply & fixing ceiling rose , surface bakelite 3 terminal complete .

Supply & fixing modular fan regulator,120W- 2 module

Supply & fixing switch modular type 6 Amp single pole one way 230V completed

Supply & fixing socket modular type 6 Amp 2/3 pin single pole one way 230 V complete

Supply & fixing switch modular type 16 Amp single pole one way 230V completed

Supply & fixing socket modular type 16 Amp 2/3 pin single pole one way 230 V complete

Supply & fixing Modular white cover plate with frame 6/8 Module

Supply & fixing Modular white cover plate with frame 3 Module

Supply & fixing modular Metal Flush box 6/8 Module

Supply & fixing modular Metal Flush box 3 Module

Supply and fix in replacement of bell push 6 Amp modular type single pole 230 volts one way complete all as specified and directed.

Supply and fix in replacement of call bell AC, 230 Volts single pole all as specified and directed.

S&F ceiling fan 1200 mm sweep with electroninc fan regulator modular type , 230 Volt, BEE 5 star rating and provisioning of flexible copper cord of size 23/0.0076 of required length from ceiling rose or connector to ceiling fan, complete with dow rod, blades, canopies etc, all as specified and directed.

Supply & fix exhaust fan 300 mm sweep, 900 rpm, 230V complete with louvers, steel body, bolts, nuts, washers, suitably embedded in wall with provisioning of 23/0.0076 flexible three core wire for electrical connections from ceiling rose to fan and cutting of wall suitable size for fixing of exhaust fan all as specified and directed.

Supply and fixing integrated sleek extruded LED indoor wall light 10 watt with driver and preqired complete including 0.5 sqmm 3 core flexible wire connecting from ceiling rose complete all as specified and difected. Make :Luker Cat No. LWL118-2,

Supply and fixing integrated sleek extruded LED indoor indirect light 12 watt with driver and preqired complete including 0.5 sqmm 3 core flexible wire connecting from ceiling rose complete all as specified and difected. Make :Luker Cat No. LWL125-2,

Supply and fixing integrated sleek extruded LED indoor wall light 10 watt with driver and preqired complete including 0.5 sqmm 3 core flexible wire connecting from ceiling rose complete all as specified and difected. Make :Luker Cat No. LWL125-2,

S&F LED tube light fitting integral type 1x10 W, 230V, connector block etc complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including dismantling of unserviceable tube light all as specified and directed. Make : LUKER Cat No LT5M10, Shakti Cat Part No- SZLBMX010.

S&F LED tube light fitting integral type 1x20W, 230V, connector block etc complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. Make : LUKER Cat NoLT5M20, Shakti Cat Part No- SZLBMX020.

Supply and fix in repairs highly efficient high power 24 LED street light fitting with pressure die cast aluminum housing heat resistant toughened glass in bulit fittings etc, with all accesories, pre-wired, also with and including GI steel tube lihht grade 40mm bore bracket of length upto 1.50 metre, bent to shaoe of off set angle upto 45 dgree for fixing street light fittings including necessary MS clamps, nutsm bolts etc all as specified and directed. make Luker Cat No LST-24, IP-66 protection or equivalent from Philips/bajaj/Crompton, as approved by the GE

Supply and fix in repairs sheet metal enclosure powder painted MCCB DB TPN 415 Volts 4 way double door vertical type with 200 Amps rated bus bar din rail neutral link with suitable for MCCB as incomer and concealed in wall all as specified and directed, Make : Standard cat part No-DSDLVDRBA0F004 or equilant Havells,Siemens,L&T.

Supply and fix sheet metal enclosure powder coated for MCB DB SPN 8 way double door type with din rail and bus bar including making good to the disturbed surface matching with the existing complete all as specified and directed.

Supply and fix sheet metal enclosure powder coated for MCB DB SPN 12 way double door type with din rail and bus bar including making good to the disturbed surface matching with the existing complete all as specified and directed.

Supply and fix of MCB SPN 240 Volts 32 Amp breaking capacity 10 KA rating complete all as specified.

Supply and fix of MCB SP 240 Volts 6 to 32 Amps breaking capacity 10 KA rating complete all as specified and directed.

Supply and fix MCCB 415 volts 16 KA three pole 100 Amps fixed type complete all as specified.

Supply and fix MCB 415 volts 16 KA three pole 63 Amps fixed type complete all as specified.

Supply and fix in replacement of Decorative LED Post-Top solar gate light 5 watt made in cast aluminium spigot housing with decorative opal diffuser and IP 65 protection complete and taking down existing unserviceable pot top lantern completeall as specified and directed. Make: Luker Cart part No LGLSOL31.

Supply and fix in replacement of Decorative LED Bolard/Bamboo type 8 watt made in cast aluminium spigot housing with decorative opal diffuser and IP 65 protection complete including cable connection and taking down existing unserviceable light complete all as specified and directed. Make: Havells Cart part No BAMBOOBL8WLED757PSYMTOPC or equivalent Halonix, Shakti(Yellow type)

M&L for reinforced cement conrete 1:2:4, type B-1 (using 20mm graded stone aggregate) for foundations, footings, columns, postd, pillars etc & in aany location, complete all as specified and direccted.

Material and labour for earthing complete with GI earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground lavel) with top edge of the plate not less than 1.5mtr below normal ground lavel connected to GI earth strip 32X6 mm by mean of bolts, nuts, check nuts and washer of brash all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including PCC pit and CI cover fullel with watering pipe, wire mess and copper lugs etc GI protection pipe 40 mm dia medium grade including testing on completion all as specified and directed.

Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces.

M&L for sub main wiring complete two run of size 4.0 sqmm PVC insulated ,unsheathed, heavy duty 1100 volts grade (FRLS) multi-stranded copper conductor cable ,drawn partly in and including PVC casing caping fixed on the surfaces of RCC slab/ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc, also including one run of 2.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multi-stranded copper conductor green colour as continous earth wire connected to common earth dolly and mains, complete all as specified and directed. Note: Two run 4 Sqmm, one run 2.5 sq mm PVC cable and one run of Casing Caping & conduit will be measured as "one unit"length.

M&L for sub main wiring complete two run of size 2.5 sqmm PVC insulated ,unsheathed, heavy duty 1100 volts grade (FRLS) multi-stranded copper conductor cable ,drawn partly in and including PVC casing caping fixed on the surfaces of RCC slab/ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc, also including one run of 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multi-stranded copper conductor green colour as continous earth wire connected to common earth dolly and mains, complete all as specified and directed. Note: Two run 2.5 Sqmm, one run 1.5 sq mm PVC cable and one run of Casing Caping & conduit will be measured as "one unit"length.

Supply & fixing Bulkhead fitting capacity 12 watt with IP 65 protection for external outdoor lightning Make - Luker cat part No LBKOVSL04 or equivalent Havells, Bajaj and Philips all as specified and directed.

Supply and fix highly efficient multi LED flood light 100 watt with pressure die cast aluminium housing, reflector and enclosed with toughened glass, IP65 including taking down old unserviceable MH flood light fittings complete all as specified and directed. Make :-Luker Cart Part No - LFL100 , and equivalent as approved of Bajaj or Crompton.

M/s. Deepak Traders

M/S VISHRANTA CONSTRUCTION