Extension of Control room at Museum, Jaipur

Amount

PART- B (Item Rate Basis)

Disposal of rubbish un-wanted material dismanted material, away from site at appropirate place including all lead and lift, loading unloading, transportation labour etc. As per direction of Engineer in charges.

Supply of steel office table having top of 19mm thick laminated particle board of size 5'x2' having frame size 25x25mm square hollow pipe MS Pipe thickness 1.6mm frame size 4'10"x 1'10" x 2'6" (750mm hieght) duly welded, grinding and fine finished, fitted with two no MS box each having three drawers, openable opposite side with locking arangement and handle as per fitting arrangement dully coated with steel primer (two or more coats) and painted with powder coated paint

Supply of chair having frame of 19mm round pipe of (16 gauge) and having seat and back of 18 gauge perforated steel sheet of 16"x16" and 16"x8" (semicircular) respectively and dully painting with powder coating paint . (Size of chair LxBxH= 20"x18"x33")

Providing & fixing Four No. 10 ltr capacity steel bucket and filling of bucket by sand and appropriate size of steel stand for fixing the steel bucket. The stand made by 65x65x 6mm M.S. angles with two or more coats enamale paint including primer coat of all buckets and stand including all material labour T&P and other required accessories. The size & shape of buckets & stand ( Length of 2Nos. vertical poas 1.50Mtr. length each, 2No. horizontal member length 0.90 mtr each and hold fast 2 No. 0.15 mtr each including E/W & dully grouted in CC 1:2:4 ( 2 x 30x30x45 CM ) as per direction of Engineer in charge including painting with primer and postman red colour and letter writting ''FIRE"

P&L Cheqquered plate cover 8mm thick on cable trenches constructed in C/R including cutting fabricating of plates complete by necessary lifting arrangements with 'U' shape hooks of 15cm long (8mm sqm bars) by welding 2 Nos 25 x 3 mm) including priming coat of approved steel primer complete as per direction of Engineer in charges.

E/W in filling of excavated earth except black cotton soil with watering & compaction of spreaded earth in 15-30cm layers levelled & neatly dressed as per requirement of site & direction of E/I, work includes cost of earth with taxes, loading, unloading, transportation, labour, water & T&P etc. complete with all lead & lift.

Gypsum Board partition with Gypsum board 6*14, 12.5 mm Usg Boral, floor channel 50mm ST50 USG Boral, Stud 48mm, 12 ft ST50 USG BORAL, with jointing fiber tape, jointing compound with gypsum screw 25*6 and 38*6 USG Boral all complete as per direction of Engineer-in-charge

Preparing of drawings, structural drawing like Footing, plinth beam,column/strut, lintel, beam/truss, slab/deck slab and other drawings like excavation, shuttering plan, connection drawings, electrification, complete with necessary revisions as required at various stages and providing 3 copies of same as per direction of E/I (Approx plinth area 100 sqm)

P/F OD:0.93M wide corrugated cold form sheets of 0.80mm thick and 50mm rin height decking sheet upto 7.20 m in length manufactured from hot dipped zinc coated high strength steel with minimum 550 Mpa yield strength and minimum zinc coated mass of 275 gm per sqm on both sides of the sheet. The steel confirms to AS 1397 and BSEN 10147:2000 cross corrugation to be provided by cutting out the corrugations and placed at a maximum spacing of 50 cm cenre to centre. The cross corrugations at edge shall be overlaped at least 10 cm from edge. The work is to be done as per direction of E/I including labour, material, T&P complete in all respect

M/s Nemi Construction Co (BID ID -3299466)

M/s Meghaa Enterprises (BID ID -3296777)

M/s Meghaa Enterprises (BID ID -3296777)

M/s Nemi Construction Co (BID ID -3299466)