Special Repair to bldg No T-219/5 to 08, T-221/3 to 08 (Total 10 qtrs) of Md Accn at Old Mil Stn and Provn of 82 x Utensilsvracks for Old Md Accn at New Mil Stn under GE Kapurthala

Amount

Taking down cement plaster of any description on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engr-in-Charge.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including wind tie complete all as specified and as directed by Engr-in-Charge.

Dismantling wall and ceiling boards’ fiber, pulp, insulations etc or insulation boards any thickness including cover fillets complete all as specified and as directed by Engr-in-Charge.

M&L for 12 mm thick rendering on brick work or concrete surfaces in cement mortar 1:6 finished even and smooth complete all as specified and as directed by Engr-in-Charge.

M&L for 15 mm thick rendering on brick work or concrete surfaces in cement mortar 1:4 finished even & smooth complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of newly plastered / concrete surfaces of walls and applying two coats of oil bound distemper over a coat of primer over 2mm thick birla white putty complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and as directed by Engr-in-Charge.

S&F Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old treated/decorated surfaces of walls by scraping down smoke soot, moulds, moss and effloreescent salts and trading oil and greasy spots etc including cornices, pilasters etc (Plastered or un plastered surfaces) and applying two coats of white (lime) wash complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of newly plastered/concrete surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old treated/decorated surfaces of walls by scraping down smoke soot, moulds, moss and effloreescent salts and trading oil and greasy spots etc including cornices, pilasters etc (Plastered or un plastered surfaces) and applying two coats of cement base paint complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete in ground floor and paving not exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge.

M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed by Engr-in-Charge.

M&L for providing preacst cement concrete1:2:4 type B-1 as in cover slab of manholes, Septic tank including chamfers, weathering, throating etc. and setting in cement mortar 1: 6 with joints to match complete all as specified and as directed by Engr-in-Charge.

M&L for 50mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection, pavements, path finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for 75 mm thick cement concrete 1:2:4, type B-2, using 20mm graded stone aggregates as in Pavements, flooring finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

Dismantling floor or wall tiles including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-Charge.

M&L for Glazed ceramic coloured tiles (premium quality) of size 300 mm x 200 mm x 7mm thick as on vertical surfaces such as dado/skirting etc laid over and including 10mm thick rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointing in white cement with pigment to match, complete all as specified and as directed by Engr-in-Charge.

M&L for Non skid coloured ceramic tiles joint free (premium quality) 7 to 8mm thick square / rectangular area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed by Engr-in-Charge.

M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.

Taking down chowkhats or frames not exceeding 1.5 sqm each with shutters (without taking off shutters from the frames) and removing complete all as specified and as directed by Engr-in-Charge.

Taking down shutters of any description from chowkats or frames without taking off chowkats or frames exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed by Engr-in-Charge.

M&L for Mild steel conforming to Fe-290, Gde-E-165 framed work as in door frames, chowkhats including necessary cutting, welding, bending, drilling etc, complete all as specified and as directed by Engr-in-Charge.

M&L for 35mm thick IInd class hard wood plain framed factory made paneled shutters with (2 panel) of 9mm BWP commercial ply with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically treated complete all as specified and as directed by Engr-in-Charge.

M&L for Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mm x 25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter:- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3. complete all as specified and as directed by Engr-in-Charge.

All as per description of serial item No 28 here-in-before but comprising of gauged shutters complete all as specified and as directed by Engr-in-Charge.

All as per description of serial item No 28 here-in-before but as in glazed/gauged ventilators complete all as specified and as directed by Engr-in-Charge. Note for item No 29 & 30 :- Glass/wire gauge shall be measured and paid separately.

M&L for galvanized mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or galvanized screws complete all as specified and as directed by Engr-in-Charge.

M&L for galvanized mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or galvanized screws fixed in repair complete all as specified and as directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size quality or description) from wooden or steel frame glazed with putty or fixed with beads complete all as specified and as directed by Engr-in-Charge.

M&L for sheet glass 4mm thick frosted and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane, complete all as specified and as directed by Engr-in-Charge.

S&F Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (a) supplied and fitted to chowkats complete all as specified and as directed by Engr-in-Charge.

M&L for sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane, complete all as specified and as directed by Engr-in-Charge.

M&L for Mild steel butt hinge, 100mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and as directed by Engr-in-Charge.

M&L for Mild Steel 300 mm size ordinary helical door spring including roller plate, complete all as specified and as directed by Engr-in-Charge.

M&L for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 140mm complete all as specified and as directed by Engr-in-Charge.

M&L for Mild steel curtain rods, bright finish/wooden finish 25mm dia heavy duty superior quality with brackets, rings (15 cm c/c), knobs etc as approved by GE complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.

M&L for reparation of old steel surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

M&L for mild steel pressed handles oval type, stove enamelled black 150mm size complete all as specified and as directed by Engr-in-Charge.

S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm long all as specified and directed by Engr-in-Charge.

S&F mild steel sliding door, bolts, plate type, stove enamelled black with bright bolt not less than 12mm bore, length of bolt 250mm complete all as specified and as directed by Engr-in-Charge.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregated as in roof padding kerbs, mud stops, coping, etc edges of concrete rounded or chamfered complete all as specified and as directed by Engr-in-Charge.

Taking up or down steel tubing 15mm bore pipe and removing from the site complete all as specified and as directed by Engr-in-Charge.

M&L for 15mm bore GI tubing medium grade with and including all fittings and cutting, threading both ends to required size, and fixed to walls, ceilings or laid under floors, making good all the disturbed portions complete all as specified and as directed by Engr-in-Charge.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sun shades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth in brick walls complete all as specified and as directed by Engr-in-Charge.

S&F in repair 15mm bore Bib tap Chromium plated fancy type brass high pressure, screwed down, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed by Engr-in-Charge.

S&F in repair 15 mm bore stop valve Chorimum plated fancy type brass high pressure, screwed down, with crutch or butter fly handle, screwed both ends for iron pipe or for union fixed complete all as specified and as directed by Engr-in-Charge.

M&L for PVC connection fibre reinforced 450 mm long, 15mm size with brass check nuts complete all as specified and as directed by Engr-in-Charge.

M&L for 600mm long towel rail PTMT (Min wt 190 gm ) any colour fixed with and including brass chromium plated screws and rawl plug complete all as specified and as directed by Engr-in-Charge.

S&F in repair for CP shower rose brass chromium plated square type of size 125mm with or without swivel joints including fixing to steel pipe or union of 15mm bore complete all as specified and as directed by Engr-in-Charge.

S&F in repair PVC low level flushing cistern 10 litres capacity valve less symphonic action type, white with inlet, ball valve, float and handle including brackets complete all as specified and as directed by Engr-in-Charge.

S&F in repair Grating PTMT 100 mm circular/Rectangular of minimum wt 30 gm and fixing over Nahani trap or floor trap complete all as specified and as directed by Engr-in-Charge.

M&L for salt glazed stone ware drain pipe Grade-A 150mm bore laid in trenches, jointed and tested as per IS-651-1980 complete all as specified and as directed by Engr-in-Charge.

S&F Rotational moulded polyethylene water storage tank three layered (cylindrical vertical with closed top) of capacity 500 Ltrs hoisted and fixed in position all as specified in SSR Part -I including dismantling of existing tank of any description, capacity complete all as specified and as directed by Engr-in-Charge.

S&F in repair Ball brass valves 15 mm bore high pressure with polythene float and fly nuts complete, screwed for iron pipe complete all as specified and as directed by Engr-in-Charge.

S&F in repair Gun-metal, globe or gate valves, 15mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed by Engr-in-Charge.

S&F squatting pan WC Orissa pattern size 580mm x 440mm white with integral foot rest (excluding flushing cistern) with P or S trap including provision of lime concrete bedding including breaking up existing damaged WC seat and connecting flush pipe etc making good to match with existing surfaces complete all as specified and as directed by Engr-in-charge.

M&L for Plain Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, fillings and mass concrete etc, complete all as specified and as directed by Engr-in-charge.

Dismantling water tanks of any size and capacity complete all as specified and directed by Engr-in-Charge.

Cutting into existing manholes for connecting new drains, making good to pipe of any dia and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and as directed by Engr-in-charge.

Dismantling cast iron soil waste or vent pipe any dia, any length with or without ears with fittings, fixed to walls or taking out of trenches complete all as specified and as directed by Engr-in-charge.

S&F cast iron soil waste and vent pipe (sand cast) 100 mm bore any length with or without ears with cement joints laid in trenches or fixed to walls complete all as specified and as directed by Engr-in-charge.

S&F cast iron soil waste and vent pipe (sand cast) 75 mm bore any length with or without ears with cement joints fixed to walls complete all as specified and as directed by Engr-in-charge.

S&F in repair 100mm bore CI branch piece single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed by Engr-in-charge.

S&F stack clamps suitable for 75/100mm bore CI pipes/ 110mm bore PVC pipes made out of 50 x 5mm flat iron and 16mm dia round iron stays including nuts and bolts and securing end of stays to wall or in roof complete all as specified and as directed by Engr-in-charge.

S&F sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste, including bedding in cement mortar on dwarf wall or fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460 mm bowl size 410 mm x 330mm x 160 mm, complete all as specified and as directed by Engr-in-charge.

S&F frame work for snap grid celling of GI perimeter angle 0.7mm thick 25mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre with intermediate main and cross T sections 0.7mm thick having web 25 flanges 35mm each fixed with each other suspended from soffits at approx 900mm C/C with GI cleats with 6mm dia hanger and expension fasteners with and incl rowl plug 12.7mm, as per instructions of section 8 SSR 2020 for snap grid ceiling, the bottom part of T section is powder coated complete all as specified and as directed by Engr-in-charge.

S&F Mild steel framed work as in guard bars/grills, grating etc with end of bars shouldered and/ or riveted or forged in to spikes and similar works including one shop coat of zinc chromate primer complete conforming to Fe-290, Gde E-165 complete all as specified and as directed by Engr-in-charge.

M&L for excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out complete all as specified and as directed by Engr-in-charge.

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by Engr-in-charge.

Removing excavated material to a distance exc. 250 m but not exc 500 m and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and as directed by Engr-in-charge.

M&L for cement concrete (1:3:6) type C2 using 40mm graded crushed stone aggregate as in bed of RCC NP-2 pipe 200mm bore including packing under and haunching against the sides of pipes after laying and testing complete all as specified and as directed by Engr-in-charge.

M&L Reinforced concrete 200 mm dia pipe class NP-2 laid & jointed complete with collars, complete all as specified and as directed by Engr-in-charge.

M&L for Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in surface channel and benching for manholes and haunching around manholes frames including necessary form work and finishing exposed surfaces even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

S&F 40mm dia cupboard knobs of brass duly polished, with nuts, screw and washer of mild steel bright finished complete all as specified and as directed by Engr-in-charge.

M&L for magnetic type catcher fixed with screws to door frame complete all as specified and directed by Engr-in-Charge.

S&F PVC cupboard frame of size 75mm x 40mm with wall thickness of 5mm made out of extruded 5mm thick Plain/Printed/Prelam PVC sheet reinforced with 15mm x 15mm M.S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 2 nos. of 150mm long brackets of 10mm x 10mm M S square tubes. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners complete all as specified and as directed by Engr-in-charge.

S&F factory made PVC cupboard shutter flush type of 25mm thickness consisting of panel of hollow PVC profile of 12mm x12mm inserted all around the hollow profile section and insert one 10mm x 10mm MS tube in the centre of this section and lipped with 10mm thick(5mm x 2) and 12mm wide on stiles and rails using solvent cement the inner panel shall be laminated with 5 mm thick termite proof waterprrof and fire retardent printed PVC sheet using solvent cement on both sides of panel complete all as specified and as directed by Engr-in-charge.

S&F flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-charge.

S&F alumunium hinges for PVC door shutter,cupboards size of hinges in 100mm complete all as specified and as directed by Engr-in-charge.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 150mm complete all as specified and as directed by Engr-in-charge.

S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long complete all as specified and as directed by Engr-in-charge.

S&F Steel plate rack of overall size 900mm x 750mm x 250mm made of stainless steel having thickness 1mm, fixing over 40cm long MS angle of size 25mm x 25mmx 3mm -02 Nos each complete all as specified and as directed by Engr-in-charge.

Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed by Engr-in-Charge.

M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FR) insulated cable in PVC concealed conduit of size 19/20 mm including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :- (a) One light point controlled by one, one way switch

One fan point controlled by one, one way switch

One socket outlet 3 Pin, 5 Amp on independent board

One socket outlet 3 Pin, 5 Amp on same board

M&L for point wiring with 2.5 Sq mm single core multi-stranded copper conductor PVC (FR) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 2.50 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board.

S&F switch piano flush type single pole one way 5 Amp complete all as specified and as directed by Engr-in-Charge.

S&F switch piano flush type single pole one way 15 Amp complete all as specified and as directed by Engr-in-Charge.

S&F socket out let 2 in 1, 3 pin 5 Amp flush type complete all as specified and as directed by Engr-in-Charge.

S&F socket out let 2 in 1, 3 pin 15 Amp flush type complete all as specified and as directed by Engr-in-Charge.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate, isolated body complete all as specified and as directed by Engr-in-Charge.

Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface complete all as specified and as directed by Engr-in-Charge.

Supply, installation, testing and commissioning of 20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and as directed by Engr-in-Charge.

Taking down old unserviceable lamp holder and S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED lamp 09W complete all as specified and as directed by Engr-in-Charge.

Supply and fix LED Bldg security light fitting 35 W housing made out of die cast aluminum alloy with toughed glass, IP 65/66 protection having clamp for mounting on wall working on 240 V AC 50 Hz, 20 watts including fixed on wall with 02 Nos MS clamps and bracket made of 40 mm dia light grade GI pipe bend to shape complete all as specified and as directed by Engr-in-Charge.

Taking down old unsv DB and supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as specified and as directed by Engr-in-Charge.

Taking down unserviceable MCB’s and supply & fix following type/rating MCB’s including necessary connection as under:- (a) S&F of MCB, 10 to 32 Amp, SP, 240 Volt complete all as specified and as directed by Engr-in-Charge.

S&F of MCB, 25 to 32 to Amp, SPN, 240 Volt complete all as specified and as directed by Engr-in-Charge.

M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engr-in-Charge. Note:- Three run of 6.00 Sqmm cable and one run of PVC Conduit shall be measured & paid as one unit.)

S&Fceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engr-in-Charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers cutting of the holes in existing wall and making good the surfaces complete all as specified and as directed by Engr-in-Charge.

Supplying and fixing smart single phase two wire dual source prepaid energy meters BIS 15884 marked in existing meter board / florr panels with pre payment capacity touch keypad based digital having current range 10-60 Amp 240 Volt accuracy class 1.0 alongwith parallel homedisplay split unit with inbuilt load control switchcontaining provision for TOD and RTC, inbuilt feature to sense the DG mode through PLSI, dual source registration wrt grid as well as DG supply and dynamic load allocation facility from grid and DG, capable to define for tariff slabs, happy hours and holiday definition complete all as specified and as directed by Engr-in-Charge.

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 16 Sqmm 2 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and as directed by Engr-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation of poles/ stays/ laying of cables etc and getting out including trimming of sides of trenches complete all as specified and as directed by Engr-in-Charge.

Removing of surplus excavated soil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engr-in-Charge.

M&L for sand cushioning to under ground cable with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable complete all as specified and as directed by Engr-in-Charge.

M&L for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable complete all as specified and as directed by Engr-in-Charge.

M/S Satguru enterprises