Repair/replacement of electrical fittings/fixtures, wiring, DBs, fan and geysers at MD accn, BD coy, CTW and FCBRNP at CME, Pune

Amount

Taking down carefully copper/aluminium point wiring (light, fan, bell, socket or power) complete, including fixture and fittings such as switches, Ceiling rose, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. credit for above items should be made as per conditions separately.

M&L for point wiring for light/fan/Bell with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators, etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc for the following :-

One light/bell point controlled by one switch

One fan/exhaust fan point controlled by one switch and regulator

Socket outlet, three pin 5 Amps on the same board

Socket outlet, three pin, 5 Amp, independent

All as per item No.2 above, but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multipin 15 amps socket outlet flush type on independent board.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings :-

One light/bell point controlled by one switch

One fan/exhaust fan point controlled by one switch and regulator

Socket outlet, three pin 5 Amps on the same board

Socket outlet, three pin, 5 Amp, independent

All as per item No.4 above, but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multipin 15 amps socket outlet flush type on independent board.

S & F in replacement switch piano, flush type, single pole one way 5 amps complete all as specified and directed.

S & F in replacement switch piano, flush type, single pole one way 15 amps complete all as specified and directed.

S & F in replacement bell push flush type single pole one way 5 amps complete all as specified and directed.

S & F in replacement socket outlet 2 in 1, 5 pin, 5 amps flush type complete all as specified and directed.

S & F in replacement socket outlet 5 in 1, 5 pin, 15 amps flush type complete all as specified and directed.

S & F in replacement switch socket combination 5 in 1, 5 and 15 Amp flush type complete all as specified and directed.

S & F in replacement ceiling rose, 3 terminal PVC/polycarbonate isolated body, surface bakelite 65 x 50 mm, 3 terminal incl PVC square block complete all as specified and directed.

S & F in replacement lamp holder, PVC/polycarbonate type with back plate suitable for batten fitting incl PVC square block complete all as specified and directed.

S & F in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed.

S & F in replacemnet Call bell ding dong AC, 230 Volts, single pole complete all as specified and directed.

S&F in replacement switch Modular, one way 6 amps, 1 module with suitable plate and cover complete all as specified and directed.

S&F in replacement switch modular one way 16 amps, 1 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F in replacement socket modular 6A, 2/3 pin combined 2 module with suitable plate and cover complete as per exisisting make and model all as specified and directed.

S&F in replacement socket modular 6A/16A, 2/3 pin combined 2 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F in replacement modular fan regulator step type 120W, 2 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F in replacement modular bell push 6 Amps 1 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F in replacement White cover plate with frame 1 module complete as per existing make and model all as specified and directed.

S&F in replacement White cover plate with frame 2 module complete as per existing make and model all as specified and directed.

S&F in replacement White cover plate with frame 3 module complete as per existing make and model all as specified and directed.

S&F in replacement White cover plate with frame 4 module complete as per existing make and model all as specified and directed.

S&F in replacement White cover plate with frame 6 module complete as per existing make and model all as specified and directed.

S&F in replacement White cover plate with frame 8 module complete as per existing make and model all as specified and directed.

S&F Decorative ultra slim with aluminium housing with high lumen output environmental friendly, energy efficient ready to use pack surface and wall mounted LED batten (LED tube light fitting complete 22W) with integrated electronic driver and 02 No PVC square blocks incl taking down old UNSV fitting. Make : Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F Decorative ultra slim with aluminium housing with high lumen output environmental friendly, energy efficient ready to use pack surface and wall mounted LED batten (LED tube light fitting complete 10W) with integrated electronic driver and 02 No PVC square blocks incl taking down old UNSV fitting. Make : Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F new generation energy saving LED Bulk Head fitting 10 Watt made up of Poly carbonate housing with diffuser incl taking down old UNSV fitting.

S&F LED building security light fitting 25 Watt , energy saving and environmental friendly long life LED fitting made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection including suitable size bracket incl taking down old UNSV one.

S&F decorative wall light fitting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base incl LED lamp (cool/warm white) 9 watt incl taking down old UNSV one.

S&F in replacement LED Tubelight (Single Side Connection) LED Rod 20 watt Ultra bright LED polycarbonate Tubelight with very high efficacy suited for installation in existing T4/T8 fitting with G13 lamp holders.

S&F in replacement elegantly designed sleek recessed mounted pressure die ciast aluminium luminaire 18 watt in powder coated white finish in round profile with optimised heat sink for efficient heat dissipation and independent electronic driver complete all as specified and directed.

S&F in replacement elegantly designed sleek recessed mounted pressure die cast aluminium luminaire 10 watt in powder coated white finish in round profile with optimised heat sink for efficient heat dissipation and independent electronic driver complete all as specified and directed.

S&F in replacement IP65 new generation, post-top 35 watt, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source.

Supply and fixing in replacement Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light 30 watt with high power LEDs as light source, suitable for highlighting architectural features or Area Lighting. Also suitable to rough services/installations. (Note:- The contractor is responsible to arrange suitable height of ladder for replacement of fitting)

M&L for sub main wiring with two run of 10 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLSH cable in and including 1100 volt electrical grade PVC Conduit of desired colour not less than1.2 mm thick and 25 mm wide & 10 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one.

All as per item No.38 above, but size 6 Sqmm Four runs and with one run 6.0 sqmm FRLSH copper wire for earth continuity.

All as per item No.38 above, but size 6 Sqmm two runs and with one run 6.0 sqmm FRLSH copper wire for earth continuity.

All as per item No.38 above, but size 4 Sqmm two runs and with one run 4.0 sqmm FRLSH copper wire for earth continuity.

S&F in replacement enclosure, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volt incl taking down old UNSV one.

S&F in replacement MCB distribution board Double door SPN 240 volts 12 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc incl taking down old unserviceable one. .

M & L in replacement MCB distribution board double door 415 volt, TPN 4-way, incl taking down old unserviceable

S&F in replacement MCB distribution board Double door SPN 240 volts 8 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc incl taking down old unserviceable one.

S&F in replacement MCB distribution board double door 240 volts 4 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls incl taking down old unserviceable one.

S&F in replacement load line vertical TPN distribution board 4 way including 1 incommer MCCB of 125 Amps 4 pole double door IP-43 protection, powder coated, IK08 with provision of suitable size bus bar and cable management kit complete all as specified and directed.

S & F in replacement MCB SP 6 to 32 Amps, 230 V AC incl taking down old unserviceable one complete all as specified and directed.

S & F in replacement MCB SPN 40 Amps, 230 V, AC incl taking down old unserviceable one complete all as specified and directed.

S & F in replacement MCB SPN 63 Amps, 230 V, AC incl taking down old unserviceable one complete all as specified and directed.

S & F in replacement MCB TPN 63 Amps, 415 V, AC incl taking down old unserviceable one complete all as specified and directed.

S & F in replacement MCB TPN 100 Amps, 415 V, AC incl taking down old unserviceable one complete all as specified and directed.

Supplying and fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium multistranded conductor of size 10 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circular

All as per item No.53 above, but of size 6 sqmm complete all as specified and directed.

All as per item No.53 above, but of size 4 sqmm complete all as specified and directed.

M&L for earthing complete with GI earth plate electrode 60x60cmx6mm thick burried directly in ground in earth pit not less than 2.25 mtr depth below normal ground level with top edge of the plate vertically to depth of not less than 1.5 mtr below ground level connected to & including GI lead 4 mm dia as earthing lead connecting to equipment by means of GI bolts & nuts etc with provision of charcoal and salt etc all as per electrical plate No-3 of SSR part-I 2009 including RCC cover and MS angle iron frame, watering with GI pipe 20 mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork in any strata and testing on completion etc. complete all as specified and directed by Engineer-in-charge.

M&L in replacement of PVC rectangular boards closed recessed of size 100 x 100 x 50mm complete all as specified and directed.

All as per item No. 57 above, but of size 175 x 100 x 50mm complete all as specified and directed.

All as per item No.57 above, but of size 200 x 150 x 50mm complete all as specified and directed.

All as per item No.57 above, but of size 250 x 200 x 50mm complete all as specified and directed.

M&L in replacement of Hylam White 3 mm Electrical Switch Board Sheet, Finishing Type

M&L in replacement of LED lamp 9 watt complete all as specified and directed.

S&F in replacement surface panel round Slim 18 watt 6500 K complete all as specified and directed.

S & F in replacement MCCB 4 pole 415V 63 Amps 16 kA incl taking down old unserviceable one.

S&F in replacement modular single phase motor starter for AC with green and red button complete all as specified and directed.

S&F in replacement modular 32 Amps DP swtich without fuse complete all as specified and directed.

Repair/checking of storage type water heater (geyser) of any capacity including replacement of required spares such as heating element thermostat, indicator, fusible plug dead weight, hot/cold water hose pipes incl any other repairs work at different locations within the CME all as specified and directed by Engr in charge for the Note : Spare components will be measured and paid separately

Supply only thermostat complete with manually temperture setting knob extra long (11 inches) ISI marked suitable for geysers 25 liters to 50 liters capacity

Supply only thermostat with auto cut-out knob complete at tripping 90 degree (+5%) Temperature of length (7 inches) ISI marked suitable for geysers 25 litres to 50 litres capacity.

Supply only non return valve (NRV) brass of 15mm bore, after dismantling old unserviceable NRV of any size all as specified and directed.

Supply only Hot/Cold water flexible hose pipe 12/16mm dia and 450 to 900mm long heavy duty covered with metal wires heat resistence with both ends PVC hexagonal check nut with washer to fixed on 15mm dia GI pipe all as specified and directed.

Supply only heating element upto 2 KW of any base such as round type, star type, square type suitable for Havells/ Bajaj/ Usha/ Pearls/ Jaquar make geysers as required at site including rubber washers (ISI Marked) complete all as specified and directed.

Taking down loose geysers of any capacity from store/site & installing the same at new location within the CME complete with grouting of bolts & all necessary pipe connections and making good the disturbed wall surfaces all as directed. Note :- spares if required shall be measured and paid separately.

S & F GI tubing (Medium grade) with all fitting and fixed to complete on wall and ceiling or laid in trenches of size 15mm bore incl taking down old unserviceable one all as specified and directed.

M & L for stop valve, cast copper alloy, screw down high pressure, crutch handle screwed both end for iron pipe, fancy type, chromium plated for 15mm bore pipe incl taking down old unserviceable one .

M & L for Bib tap,fancy type, chromium plated for 15mm bore pipe incl taking down old unsv one complete all as specified and directed.

S & F in replacement indicator lamp of geyser 25-50 litres capacity of RED/GREEN colour complete all as specified and directed.

S & F in replacement PVC copper conductor cable 3 core 2.5 sq mm flexible multistranded 1100 V grade unsheathed cable.

M & L in replacement for Metal clad industrial plug top of cap 16 Amps incl taking down old unsv one complete all as specified and directed.

M & L for plug top porcelein 3 pin 15/16A 230 V AC supply incl taking down old unsv one complete all as specified and directed.

Supply and laying in replacement of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for outer dia 16mm complete all as specified and directed

Supply and fix in replacement ball valve suitable for 16mm dia CPVC pipe complete all as specified and directed.

Supply and fix in replacement brass elbow suitable for 16mm dia CPVC pipe complete all as specified and directed.

Supply and fix in replacement brass tee suitable for 16mm dia CPVC pipe complete all as specified and directed.

Supply and fix in replacement brass union suitable for 16mm dia CPVC pipe complete all as specified and directed.

S & F in replacement fan hanging hook any type or size suitable to hang on wooden block, MS bar etc with rubber reel, nuts, bolts, split pin etc suitable for ceiling fan complete all as specified and as directed by Engr-in-Charge.

S & F in replacement down rod made out of GI pipe medium grade 15mm dia incl drilling ,cutting threading & white painting etc for ceiling fans 1200/1400mm sweep all as specified and directed by Engr-in-Charge.

S & F in replacement canopy for ceiling fans upper and bottom (Set of two) complete all as specified and directed.

S&F in replacement capacitor 2.5 mfd for ceiling fan all as specified and as directed by Engr-in-Charge.

Taking down of ceiling fan dismantling blades from fan and deposited to MES store yard for repair and collect repaired/new ceiling from AGE E/M store and hanging the same at site complete all as specified and directed by Engr In Charge.

S&F in replacement LED panel 2 feet x 2 feet size 36 wattt glare free symmetrical including driver and taking down old UNSV one complete all as specified and directed.

Supply and fix in replacement (PRISMATIC) Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base.

Supply and fix in replacement recess mounted LED moveable projector zoom spot light 15 watt using state of the art COB LED chips with accurate ferelectors to provide maximum and optimum light output complete all as specified and directed. Note : Contractor is responsible to arrange ladder for suitable size for fixing of lights in the ceiling and cost for the same includded in the quoted rate of item.

ONKAR ELECTRIC AND GENERAL STORE

ANUSHKA BUILDERS

SHREE VAIBHAV ELECTRICALS

Mahindra Electric Stores