REPAIR REPLACEMENT OF TILING SANITARY FITTINGS AND CI PIPE LINES IN CERTAIN BUILDING UNDER CELL NO 1 UNDER GE NW NOFRA COLABA MUMBAI

Amount

Material & labour for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and directed by the Engineer-in-Charge

Material & labour Glazed coloured ceramic tiles on vertical surfaces of size 300 x 200mm x 7mm thick over 10mm thick Screed bed or bedding layer in CM 1:4 for laying tile finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and directed by the Engineer-in-Charge

Material & labour for vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and directed by Engineer-in-Charge

Material & labour for vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm including 10mm thick backing layer of CM 1:4 for laying floor finishes on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and directed by the Engineer-in-Charge

Demolition of brick work built in cement mortar at any position and condition incl removing of demolished material to store.

Material & labour for brick work with subclass 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6.etc complete all as specified and directed. by Engineer-in-Charge.

Material & labour for half brick work in cement mortar (1:4) straight or curved on plan to any radius with locally available Subclass ‘B’ old size best quality bricks all as specified and directed.

Material & labour for 15mm thick Rendering on brick ,concrete surfaces in cement mortar 1:6 finishing even and smooth without using extra cement and similar likes at any height including necessary scaffolding including taking down old plaster complete all as specified and directed. & directed by Engineer-in-Charge.

Material & labour for plastering 10mm thick on concrete surfaces in cement mortar 1:3 finishing even and smooth without using extra cement to RCC ceiling, chhajjas, roof projection,fascia,fins,parapet etc and similar likes at any height including necessary scaffolding, ladder, formork and including taking down cement / lime plaster of any description including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by the Engineer-in-Charge.

Material & labour for preparation of newly plastered or unplastered surfaces and applying two coats of oil bound distemper on wall over a coat of primer all as specified and directed.

Material & labour for preparation of newly plastered surface of ceiling and applying three coats of white wash.

Supply & fix wash hand basin vitreous china white (flat back) of size 550x450mm including pillar cock , CI bracket 15mm dia polythene connection , 32mm dia waste coupling and 32mm dia PVC flexible waste pipe etc. complete all as specified and directed.,including taking down of old wash hand basin and removing to store etc complete all as spcified and directed

Removing and refixing only Vitreous china wash basin white flat back any size complete incl necessary fittings as required complete all as spcified and directed

Supply & fix in repair PVC low level flushing cistern including brackets 10 litre capacity, with inlet ball valve float, handle,flush pipe etc complete all as spcified and directed

Removing and refixing only high or low level flushing cistern (inclusive of brackets),and connection to pipes complete all as spcified and directed

Supply & fix in repairs plastic water closet seat covers closed pattern with flat bottom and cover of MS chromium plated or aluminised hinging device complete all as spcified and directed

Supply & fix in repair 15mm pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as spcified and directed

Supply & fix white vitreous china wash down water closet pan (pedestal pattern) with PVC seat cover including connection to drain pipe and flushing pipe all as specified and directed

Supply & fix vitrous china squatting pan 'Orrisa Pattern' size 580 x 440mm white with integral foot rest including connecting and necessary provision of lime concret complete all as specified and directed by Engineer-in-Charge

Supply & fix PVC cabinet mirror 450X300 mm with 3 mm thick mirror complete all as spcified and directed

Supply & fix Toilet paper holder along with cover of stainless steel suitable for 120mm width and 100mm depth long paper fixed to walls complete all as spcified and directed. Sample approved by GE (CAT No. JAQUAR CAT No. 1151N or Equivalant in HINDWARE / PARRYWARE

Fixing only in repairs PVC cabinet mirror 450X300 mm with 3 mm thick mirror complete all as spcified and directed

Supply & fix decorative corner, 6mm thick glass self round, 300mm size with SS railing 25mm high in bath room, fixed with 'D' type brackets on walls af approved make and pattern complete all as spcified and directed

Supply & fix in repairs stainless steel towel rail 20mm dia D type 60cm long between flanges complete all as spcified and directed

Supply & fix in repair sink with drainage board made of stainless steel 1mm thick kitchen with plugs washers and wastes,including bedding in cement mortar to dwarf wall or including finishing cantilever brackets and connecting union to pipe over all size 915x460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed

Supply & fix PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tubecomplete all as per specification and all as per drawing.

Supply & fix factroy made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for styleand plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plaincolour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification and as per drawing.

Supply & fix hold fasts and similar small articles conforming to Fe 410-0or 310-3.

Supply & fix stainless steel hinges of size 100mm all as specified and directed.

Supply & fix Aluminum anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed

Supply & fix extruded aluminium alloy handle fabricated type anodized 125mm long complete all as specified and directed

Taking down chowkhats or frame with shutters (without taking off shutters from frame) each shutter not exceeding 1.5 Sqm

Material & labour for marble Baroda green 18 to 20 mm thick (table rubbed and polishing) as in skirting/dado/ window cills/ jambs, vertical surface over cement rendering and jointed with grey cement,over and including screed bed of 15mm thick in CM 1:4,including pointing in white cement (1:2)using marble dust with admixture of pigment to match with the shade of marble and making nosing at right angle corner as directed by Engineer-in-Charge

Material & labour for polished granite stone slab 16 to 18mm thick coloured as in cooking platform/door sills , set and jointed with grey cement slurry and pointed in neat white cement slurry mixed with pigment to match the shade of floors, including moulding at front edge or both edges all as specified and as directed by EIC complete. Note : Quality of granite all as approved by GE

Material & labour for 18 to 20 mm thick mirror polished kota stone work as in Partitions/ shelves as in Wardrobs, fixed in cement mortar (1:4) including cutting chasing in walls,bull nosing/ moulding on all exposed edges/sides and pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade of Kota stone complete all as specified and directed

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc.

Material & labour for PCC 1:7:12 with stone aggregate as in lean concrete/filling concrete incl demolition of old concrete complete all as specified and directed

Supply only integral water proofing compound

Supply and fix in repair 100mm dia CI floor trap/ Nahni trap jointed with cement joint and making good to floor.

Supply and fix 75 mm dia Cast iron Nahni trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) & making good all as specified & directed by Engineer-in-Charge

Supply & fix CI soil, waste pipe 100mm dia sand cast iron any length with or without ears with cement joint laid in trenches of in floor.

Supply & fix CI soil waste pipe 75mm dia fixed in cement jointed laid in trenches of in floor complete all as specified and directed.

Supply & fix in repairs 100 mm dia sand cast CI bends 100mm dia long (any radius) with oval access door and jointed with neat cement paste .

Supply & fix in repairs 75 mm dia sand cast CI bends 100mm dia long (any radius) with oval access door and jointed with neat cement paste .

Supply & fix CI branch pieces/connector single 100mm dia in repairs.

Supply & fix CI branch pieces/connector single 75mm dia in repairs.

Supply & fix 40mm dia unplasticised PVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, ceiling or in floors incl necessary clippings etc. as in WHB/ sink waste pipe

Supply & fix in repairs of 32mm dia PVC (flexible) waste pipe of length 900 mm complete complete all as spcified and directed

Supply & fix in repairs of 38mm dia PVC (flexible) waste pipe of length 900 mm complete complete all as spcified and directed

Supply & fix stainless steel grating cover fixed in repairs to suit for 100mm/75mm dia nahani trap fixed with cement complete all as spcified and directed

Taking up & down steel tubing & connections of follwing size complete all as specified and directed.

(a) 20 mm bore

(b) 15 mm bore

Supply & fix GI water tubing medium grade (ISI marked) including with all fittings and fixed to wall /ceilings laid in floor or concealed of follwing size complete all as specified and directed.

(a) 20 mm bore

(b) 15 mm bore

Supply & fix CP brass 125mm size shower rose with rubit cleaning system with shower arm and flange suitable for 15mm bore GI tubing complete all as specified and directed.

Supply & fix in repair Fancy type bib taps brass CP with wall flange suitable for 15mm bore GI tubing with necessary fittings complete all as specified and directed.

Supply & fix in repair Fancy type Brass CP mixer formixing hot & cold water screwed down for iron pipe and fixed 15mm bore GI tubing with necessary fittings complete all as specified and directed.

Supply & fix in repair fancy type CP brass angular stop cock suitable for 15mm bore GI tubing, with necessary fittings complete all as specified and directed.

Supply & fix in repair fancy Concealed stop valve with long shark and adjustable wall flange including union suitable for 15mm bore GI tubing, with necessary fittings complete all as specified and directed.

Supply & fix PVC connection 15mm dia and 45 cm long with 2 Nos PTMT nuts, fixed in repairs complete all as specified and directed. by Engineer-in-Charge.

Supply & fix PVC connection 15mm dia and 60 cm long with 2 Nos PTMT nuts, fixed in repairs complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete on Roofs, floors (other than ground floors),kitchen platforms and similar suspended work (reinforcement cut as required to facilitate demolition).

Material & labour for RCC 1:2:4 type B1 (using 20mm graded aggregate)as in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like including weathering, slightly rounded or chamfered angles and throating any height including necessary scaffolding, ladder & formork etc complete all as specified and directed by Engineer-in-Charge.

Material & labour forTMT bar as in Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming, any height including necessary scaffolding, ladder & formork etc complete all as specified and as directed.

All as per item No 51 above item but 6mm to 8mm dia,

Material & labour for preparation of old plastered or unplastered surfaces and apply one coat of white wash on ceiling all as specified and directed

Material & labour for Washing rubbing down and stopping of old distampered and painted wall surfaces including brooming down or steel wire brushing scrapping down smoke soot, moulds moss and efforescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on wall surfaces all as specified and directed by Engineer-in-Charge

Material & labour for preparation of old plastered surfaces of wall and applying one coat of white wash all as specified and directed by Engineer-in-Charge

Material & labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Dismantling boarding of any description, fixed in any position with nails/screws

Supply & fix for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section(not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as spcified and directed

Supply & fix Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

Material and labour for providding and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as spcified and directed

Material & Labour for applying two coats of interior emulsion paint over a coat of primer over layer of smooth POP/Putty finish punning 3mm thick strictly as per manufacture instruction with smooth roller finish ,complete all as specified and directed. (Note after painting ,cleaning of all floors,glass & furniture by own arrangement). . Make :- (a) Paint : Asain Paint Tractor Emulsion or Berger Bison or equivalant in nerolac. (b) Putty : Berger waterproofing wall putty or Trucore acralyic wall putty or Birala. (c) Primer : Asian or Berger or equivalant in nerolac.

Supply & fix for anodised aluminium snap grid of size 605 x 605 mm frame work for false ceiling as specified and directed by Engineer-in-Charge

Supply & fix for exposed metal frame ceiling with calcium silicate board of silicious and calcareous material reinforced with cellulose fibre of thickness 8mm for fixing in 600mm x 600mm grid (Frame work for ceiling shall be measured and paid separately)

Material & labour for 910mm x 125mm x 14mm thick interlocking engineered wooden flooring of approved colour mounted on 2mm thick resin saturated paper and fixed on levelled floor using adhesive and treated with anti termite chemical as per manufacturers instructions incl removal of old flooring and removal to store and as directed by Engineer-in-Charge Note :- (i) Make- Armstrong, lamiwood pergo or equivalent as approved by GE. (ii) Proper levelling of base shall be done before laying including filling holes with cement or cement plaster in CM 1:3 and the rate quoted for this item shall be deemed to be included in this item

Taking down chowkhats or frames with shutters (without taking off shutters from frames) not exceeding 1.5 Sqm incl removing to store complete all as spcified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from frames) not exceeding 1.5 Sqm incl removing to store complete all as spcified and directed

Material & labour for powder coated Aluminium frame and shutter for sliding windows & ventilators (movable louvers type) with one or more rebates including joining cleats for fixing etc. Rubber gasketting all round the panels/ shutters to fix glass, PVC gasketting in all channels, locking arrangement, (minimum thickness of powder coating 60 micron for windows and ventilators with natutal matt fininsh) complete all as specified and directed. [Note :- (i) Glass to be measured and paid separately under respective of work. (ii) Items shall be paid as per weight of aluminium section. (iii) The quoted rate shall be inclusive of rubber gasket/ PVC gasket, glazing clips, screws etc as required which shall not be measured for arriving the weight. (iv) The rate shall be inclusive of the locking arrangement including complete packing with silicon gel arround contacting surface of aluminium work

Supply & fix 5mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads exceeding 0.5 Sqm in each pane complete all as specified and directed

Supply & fix 4mm thick one side ground or obscured or frosted glass sheet ordinary quality and glazing with oil putty fixed with beads not exceeding 0.5Sqm in each pane complete all as specified and directed

Supply & fix in repairs stainless steel wire cloth (Wire dia 0.36 mm) and average width of aperture 1.40 mm and fixed to aluminium beading and rubber bearing Vent/window complete all as specified and directed. Note :- cost of aluminium beads and neoprene included in relevant item of aluminium window & Ventilators.

SUNRISE CONSTRUCTION CO

DHARICHHAN ENTERPRISE

RAJU AND CO

M/s. MAYUR ENTERPRISES

ASHOK CONSTRUCTION

Shetty Construction Co

BOB ENTERPRISES

Darpan Construction

SN CONSTRUCTION

M/s S.D Construction Co