Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.5 Cr
EMD Value
₹2.3 L
Closing Date
2 Mar 2024, 6:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Public Works Department
EXECUTIVE ENGINEER
BALANCE WORK OF CONSTRUCTION OF NEW PRAVASI MANDIRA AT RATTIHALLI, HAVERI DISTRICT AND SUPPLY OF FURNITURES
PWD/2023-24/BD/WORK_INDENT5848
PWD/2023-24/BD/WORK_INDENT5848
Open
Buildings
Two Tender Document System(Two Cover)
PWD Division Office Haveri
5 documents required · 5 mandatory
Executed in any one year the following minimum quantities of work PCC/RCC 150.00 Cum BBM/SSM/CC Solid Blocks /Similar Masonry Walls 99.00 Cum Steel Fabrication 13.65 Tonne Plastering 1115.40 Sqm Laying of Tiles 330.00 Sqm
To qualify for award of this contract, each Tenderer in his name should have in the last five years 2018-19, 2019-20, 2020-21, 2021-22 & 2022-23. 3.2(b) satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar work such as Building work of value not less than Rs 77.33 Lakhs (usually not less than 50% estimated value of contract)
Availability by owning/ Lease/ Hire basis the following key and critical equipment for this work: For Lease/ Hire basis- relevant documents (commitment agreements etc., shall be scanned and uploaded) As per this note, each tenderer should demonstrate availability of few key equipments / machinery for execution of the work. However as per Govt. circular No.GO-FD/AE/263/EXP12-2022/D: 11-05-2022, this clause for owning key equipments for works costing upto Rs. 3.00 crores is exempted. However it is obligatory for the contractor to use the following machinery for various activities involved in construction as per MORTH Specification 1) Concrete Batch Mix Plant/Rotavator of suitable Specification 1 No. 2) Shuttering materials 250.00 Sqm 3) Plate & Pin Vibrators 2 Nos Each 4) Excavator like JCB/Hitachi 1 No 5) Water tanker 1 No 6) Tippers 2 Nos 7) Construction elevator/Building Hoist/Tower Cranes 1 No 8) Pumping Machinery 1 No
The EMD of Rs.2,32,000/shall be made through e-payment or in Two parts-Part (1) Rs.100000 /- by e-payment Part (2) Rs.132000/- Shall be in the form of Bank Guarantee/FDR, in the prescribed format, obtained from any Nationalized / Scheduled bank in favor of Executive Engineer, PWD, Division, Haveri which should be scanned & uploaded to the e Karnataka Public Procurement Portal while submitting the tender. Original Bank Guarantee /FDR of the part (2) of EMD, shall be delivered to the Executive Engineer, PWD , Division, Haveri, at the time of agreement.
3.3 (b)Each Tenderer should further demonstrate: liquid assets and/or availability of credit facilities of not less than Rs.42.18 lakhs Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc. (Letter of credit should be in prescribed format-2, if not then the tender will not be accepted)
To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. 2018-19, 2019-20, 2020-21, 2021-22 & 2022-23. 3.2 (a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.309.32 Lakhs (Turnover Certificate should be with UDIN Number)
Constitutional and Legal Status of the Tenderer
Principal Place of Business (Full address)
Qualification and experience of the key technical and Management personnel in permanent employment with the Tenderer and those that are proposed to be deployed on this work, if work is awarded
Name and Address Telephone Nos. Fax Nos. and email ID of the Tenderers Bankers
The proposed methodology and program of construction, backed with equipment planning and deployment duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Information on works which are yet to be completed, Information of the works for which Tender Acceptance letters are recieved, Information of the works for which Tenderer has submitted Tender, Information on litigation in which the Tenderer is involved
₹3,870
₹2.3 L
22 Feb 2024
22 Feb 2024
5 Mar 2024
29 Feb 2024
26 Feb 2024
Sub estimate No. 1 Construction of First Floor
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Formwork, Centering & Scaffloding 70% For Columns ---- including cost and conveyance of all materials, loading
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Formwork Centering Scaffloding 60% For Beams and Lintel ---- including cost and conveyance of all materials, loading
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Additionalities for Formwork, Centering & Scaffolding 50% For Roof Slab ---- including cost and conveyance of all materials, loading
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Additionalities for Formwork, Centering & Scaffolding 60% For Sill ---- including cost and conveyance of all materials, loading
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Additionalities for Formwork, Centering & Scaffolding 45% For Chejja ---- including cost and conveyance of all materials, loading
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side ...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete ---- including cost and conveyance of a...
Providing and fixing 35 mm thick one side teak and one side commercial flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal fram...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPEThermo Plastic Elastome and ...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...
Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofi...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slopecompacting, including cost of materials, labour, curi...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...
Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with...
Sub estimate No. 2 Water Supply and Sanitary work
Providing and fixing brass stop cock of approved quality :15 mm nominal bore ---- including cost and conveyance of all materials, loading
Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms ---- including cost and conveyance of all materials, loa...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...
White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers ---- including cost and conveyance of all materials, lo...
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. ---- including cost and conveyance of all materials, loading
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter ---- including cost and conveyance of all materials, loading
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g ---- including cost and conveyance of all materials, loading
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular...
Providing & fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe wit...
Providing & fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe wit...
Providing & fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe wit...
Providing & fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe wit...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :50 mm nominal bore ---- including cost and conveyance of all materials, loading
Providing and fixing unplasticised PVC connection pipe with brass unions :45 cm length 20 mm nominal bore ---- including cost and conveyance of all materials, loading
Providing and placing on terrace, polyethylene water storage tanks as per IS 12701 : 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and ov...
PVC pipes of10 Kg/cm2 for 110mm ---- including cost and conveyance of all materials, loading
PVC pipes of 4 Kg/cm2 for 200mm(4.256)) ---- including cost and conveyance of all materials, loading
Providing PVC-U INDIVIDUAL U.G.D House service connection (which shall be laid from inside the customer property ) which includes: a) Supply of PVC-U pipe (b) providing and fixing of 315 mm dia the PE...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing & fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe wit...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...
Providing and fixing 100 mm sand cast Iron grating for gully trap. ---- including cost and conveyance of all materials, loading
Providing and fixing PTMT grating of approved quality and colour 125 mm nominal dia ---- including cost and conveyance of all materials, loading
PVC pipes of 10 Kg/cm2 for 200mm ---- including cost and conveyance of all materials, loading
Sub estimate No. 3 For Sump tank
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Formwork, Centering & Scaffloding 3% For raft ---- including cost and conveyance of all materials, loading
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Formwork, Centering & Scaffloding 10% For walls ---- including cost and conveyance of all materials, loading
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Formwork, Centering & Scaffloding 50% For slab ---- including cost and conveyance of all materials, loading
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofi...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...
Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...
Providing & fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe wit...
Sub estimate No. 4a For Borewell Drilling
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...
Sub estimate No. 4b For Borewell Pump, Pump house and Electrification
Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. ---- in...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with
hinged front cover, equipped wi...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ---- i...
Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. ---- including cost and conveyance of all materials, loading
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V up to 300mA sensitivity on existing wood/panel board. ---- including cost and conveyance of all materials, loading
Fixing a shunt capacitor of . KVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. ---- including cost and conveyance of...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. ---- including cost and conveyance of all materials, loading
Digging of Pit for providing GI Pipe type Earthing ---- including cost and conveyance of all materials, loading
GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg ---- including cost and conveyance of all materials,...
Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each ---- including cost and conveyance of all materials, loading
Good Quality Salt for grounding purposes packed in 50 Kg gunny bag ---- including cost and conveyance of all materials, loading
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +3%...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable ---- including cost and conveyance of all materials, lo...
Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...
Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...
GI Pipe B - Class as per IS-1239 ---- including cost and conveyance of all materials, loading
Laying the GI Pipe 80 mm to 150 mm dia at Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting with Cuts and Threads wherever necessary complete. ---- includin...
Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable ---- including cost and conveyance of all materials, loading
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter. ---- including cost and conveyance of all materials, loadi...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
RCC hume pipe Circular pump house: Supplying precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 ...
Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,c...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade English and Roman ---- including cost and conveyance of all materials,...
Sub estimate No. 5 For Concrete Road
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rol...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Sub estimate No. 6 For Rainwater Harvesting
Supplying and erection of RCC rings of Well steining of 0.3Mtr depth using M20 grade concrete using clean graded granite or trap or jelly of approved quality 20mm and down size well compacted includin...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and Filling in foundation with granite / trap broken metal 100mm and down size with approved M-Sand including hand packing, ramming, watering including cost of all materials and labour with ...
Supplying and filling Sand ---- including cost and conveyance of all materials, loading
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Additionalities Formwork, Centering & Scaffloding 50% For slab ---- including cost and conveyance of all materials, loading
Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...
Sub estimate No. 7 Furnitures work
Teak wood Square leg Dining table : Of size 6'x3.5' Made out of teak wood leg size 4"x4".Table upper patti 4"x1.25". Top 18mm ply with sunmica or 12mm glass. ---- including cost and conveyance of all ...
Teak wood Dining chair seat & back cushion: (Rose wood model) with curved legs - front legs of size 3"x3" with curve .Rear legs of size 2.5"x1.5" with shape. Seat pattis of size 3"x1.25" with cushion....
Serving Table: Made out of Teak Wood frame with 2"X2" legs and frame patti of size 3"X1.25" andbottom patti of size 2" X 1.25". Closed on all 3 sides with 12mm ply/PLPB and top made out of 8mm ply/PLP...
Wardrobe model : Made out of 18mm OSR PLPB (good quality ) /Ply with lamination.(One side raw prelaminated particle board ) on three sides and bavk of 12mm PLPB Inner design should have drawers in the...
Teak woodTable : of Size 6' x 3' , Leg side 2.5"x2.5" . Table frame to be 4"x1.25" thick pattis. Foot rest to be provide with 2"x1.5"=2 nos.Table top to b elaminated with 1mm thick laminate with teak ...
Conference Table :(Plywood with Laminated Top) Of size Height 2.5’ x Width 2’. Made out of 18mm Plywood for Top and Front. With both side laminated and Front side closed. Inner side shall be provi...
Director Cushion Chair: High back chair with seat and back High quality feather touch Rexine. Armswith cushioning. Chair to have SS base with 5 Caster wheel legs along with Syncro Mechanisum ---- incl...
Coral cushion chair : Medium back chair with adustable arms and tilting mechanism along with ss base with 5 caster wheel legs.Seat and back moulded foam. ---- including cost and conveyance of all mate...
Peacock Chair : (Standard company) Seat, and Back half cushion with Cloth or Rexin. ---- including cost and conveyance of all materials, loading
Teak Wood Alpha Cot : Of size 6.5'x5'. Made out of Teak wood Leg size - 3.5"x3.5", side rullers 4"x2". Head side center height 32" and Bits with curve of 4" height all along the head side, with middle...
Teak Wood Sunrise Cot Single : Of size 6.5'x3'. Made out of Teak wood leg size 2"x3" . Side bars 4"x1.5". Leg side height 18". Head side 33". Head and leg side Teak wood patti. Cot shall be neatly fin...
Bed Side Table: (Small) Teak wood bed side table of size H-18" X D-15" X W-18". Made out of 2"X2" teak wood legs. The side table should have one drawer and one door, made out of 18mm ply onthe front s...
Corner table : of size height 2' width 3' . Made out of MDF/ply with veneer. Front with glass.MDF/ply with veneer. ---- including cost and conveyance of all materials, loading
Teak Wood Mosquito Frame : Of size 6'x6.5'. Made out of two vertical bars on the either side of size 4'x3"x1.5" upper side frame should be made with 2"x1.5" patties on all the 4 sides, such that it ca...
Teak wood Damru sofa set : 1+3+1 with tepaoy and cushion, made out of teak wood front and back legs ---- including cost and conveyance of all materials, loading
Teak wood teapoy : (Latest model) As per Indenters choice. ---- including cost and conveyance of all materials, loading
Dressing table with stool : Teak wood dressing table height 6' and middle 2.5' Table should be 2' height with 3 drawers on one side aqnd door with loack on right side made out of complete teak wood. T...
Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge ---- including cost and conveyance of all materials, loading
Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. ---- including cost and conveyance ...
Providing and supplying King Size 6ft x 6ft Soft PU foam 5 inch thick mattress with better enhanced air circulation & breathability & sleeping comfort of size as per direction of engineer in charge --...
Providing and supplying Single size 6ft x 2.5ft Soft PU foam 5 inch thick mattress of reputed make with better enhanced air circulation & breathability & sleeping comfort of size as per direction of e...
Providing and supplying Pillow Microfibre with deep sleeping comfort of size upto 70cm x 40cm as per direction of engineeer in charge ---- including cost and conveyance of all materials, loading
Providing & supplying 100% Polyester machine wash capable Blanket 80x90inches with calm and light colors as per direction of Engineer in charge of work ---- including cost and conveyance of all materi...
Providing & supplying 100% Polyester machine wash capable Blanket 66x90inches with calm and light colors as per direction of Engineer in charge of work ---- including cost and conveyance of all materi...
Sub estimate No. 8 For Internal Electrification work
Supplying .TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacito...
Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. ---- inc...
Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas...
Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries ---- including cost and conveyance of all ...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone Socket ---- including cost and conveyance of all materials, loa...
Supplying of recess mounting non integral type . LED w luminaire comprising of pressure decast extruded aluminium housing, with spring loaded false ceiling Power LEDs with CCT 6500 degree K, CRI 70%. ...
Supplying and fixing one of 230 V bell or buzzer and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws. ---- including cost and conveyance of all materials, ...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.
16A Three Way 5 Pin Socket ---- including cost and conveyance of all materials, loading
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.
16A Three Pin Top ---- including cost and conveyance of all materials, loading
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip
thickness and resistivity as per IS-3975 50 Sqmm...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff . 35 to 95 Sqmm ---- including cost and conveyance of all materi...
Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable up to 50 Sqmm ---- including cost and conveyance of all materials, loading
Heavy Duty Copper Terminal Long Barrel
50 Sqmm Copper Terminal, Apprx Wt: 26 Gm ---- including cost and conveyance of all materials, loading
HDPE/PLB Pipe 50/42 mm BESCOM Part 3 11kv materials ---- including cost and conveyance of all materials, loading
Providing and fixing perforated 50 mm dia. GI pipes 'A' class in drilled holes for drainage including cost of all materials, machinery, labour, making perforations, providing flap valve and jointing e...
Supplying .litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside Fiber body outside, filled with glass wool bet...
Erection charges for fixing a . litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm b...
Supplying, installation, testing & commissioning of 12V .AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type.
100 AH capacity ---- including cost and conveyan...
Supplying, installation, testing and commissioning of solar hot water heater comprising of high quality Evacuated Glass Tube (EGT) with absorber coating collector of size 58 x 1800 mm. Inner tank Mate...
BESCOM Part 3 11kv materials ---- including cost and conveyance of all materials, loading
Sub estimate No. 9 Diesel Generator
Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO...
Supply, Erection, testing and commissioning of AMF panel suitable for .kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, alumi...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
STAR RATE GO.pdf
Others - Star Rate GO • 0.68 MB
government notification bc loc letter to be issue_221012_101522 (1).pdf
Others - LOC Format • 1.75 MB
formats-1 to 10.xls
Instructions to Tenderers • 0.10 MB
kw4 no 5848.doc
Tender Document • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .