Installation of 1HP Submersible pump near house of Debasish Mukherjee at Hematpur Under Manikkundu GP (Scheme Code. APAS/01/232/198/0005

Labour for boring tubewell of required dia by water jet system through any type of soil strata including hire. And labour charges for boring pipes, scaffolding, tools and plants as necessary and taking cut them and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. 80 mm dia boring etc

Supplying PVC threaded pipe with socket Conforming to ASTMD-1785 schedule -40( approved P.H.E. vendor list) to match with G.I pipes as per IS : 1239 (Part-I), i) 80 mm dia Pipe

supplying 80 mm dia PVC Ribbed Strainer PIPE of approved make with adopter confirming to IS 12818 specification.

Supplying, fitting, fixing Steel Cutter Piece up to 450 mm long with sockets 75 mm dia

Supplying,Supplying, fitting, fixing (M.S. / G.I.) top cap 80 mm dia

Packing the annular space between the outside of the tubewell pipes & Strainers and the bore with per size washed gravel of approved quality having size from 2mm to 5mm or the size approved by the Engineer-in-charge including cost of all materials labour and equipment complete.

Washing and developing tubewell with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangement for testing the yield in gallons per hour with 'V' notch including hire and labor charges for all tools and plants and scaffolding as required comp.in all respect.

Mobilization charges of all machineries / boring set and its accessories belonging to the work site

Supplying at site 1.0 H.P. sub-mersible pump and morter with control panel Board and star delta starter (220 v) (make pluga/KSB/TEXMO/BATLIBOI/COMPTON GREEVS approved brand and 8 stage) in all complete.

32 mm dia "Ashirvad" make standard duty 25kg/pressure Column pipe (with coupler & lock system)

2.5 sq. mm 3core PVC insulated 1.1 KV grade flat submersible Cable (Make- Filolex / Havels)

80 mm dia M.S/G.I. Clamp with necessary nut bolt(heavy)

32 mm dia M.S/G.I. Clamp with necessary nut bolt(heavy)

Supply of G.I. Pipe of Non TATA make 80 mm dia including socket medium quality

Fitting, Fixing Submersible Pump Motor, Main-Switch, Column Pipe etc all complete

supply of G.I. bend 32 mm dia

supply of G.I. L 32x20 mm dia

supply of G.I. Tee 32 mm dia

supply of G.I. nipple(20x100) mm.

supply of G.I short piece of non TATA make (up to 150 mm long) 32 MM dia

supply of solvent cement 250 grm per packet.

supplying fitting fixing 32 mm dia male female adopter (M.S/G.I) OF approved quality

Construction of masonry platform 1.2m X 1.2m with foot rest of size 0.60m X 0.60m with encasing the pedestal base of size 0.75m X 0.75m X 0.45m with cement concrete (1:2:4) over a layer of picked jhama brick flat soling for platform and 12.5cm X 7.5cm brick band on all side 12.5mm thick cement plaster (1:4) with neat cement finish to the exposed surface etc. complete.

Inscription of letter writing as Display Board.

GST and Labour Cess (9% + 9%) + 1%

Please Enable Macros to View BoQ information