CERTAIN MISC BR ITEMS AND COMPREHENSIVE REPAIRS TO CERTAIN OTM MD ACCN IN AF STN UNDER GE AVADI.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing), removing and rubbish of the premisses, complete all as specified and as directed.

Demolition of stones or brick masonry or block walling, built in cement mortar including all quoins, arches etc., but excluding ashlar facing, dressed stone work etc.complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km, all as specified and as directed.

Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness, laid bedded and pointed in any mortar in floors, aprons etc all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any guage, thickness including Nainital or similar pattern roof covering, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation wooden etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets in ceiling, complete all as specified and as directed.

M&L for Non skid light coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, as in skirting etc,confirming to IS: 15622 : 2006 grade B II (a) matt superior finish flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 10 mm thick in CM 1:3 as bedding layer for floor finishes complete all as specified and as directed.

M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar 1:6 (01 cement : 6 coarse sand) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed.

All as per items no 10.00 here in before but as in skirting

M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar 1:6 (01 cement : 6 coarse sand) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed.

All as per Items No 12.00 here in before but as in skirting

M&L for Glazed ceramic, premium quality, coloured/ printed tiles 350mm x 250mm/ 450mm x 350mm x 7 to 8 mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed.

S&F Coloured Glazed tiles 300x200x7mm thick, on walls/vertical etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface complete all as specified and as directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15mm thick screed bed in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing in white cement 1:2 (1 cement : 2 coarse sand)using marble dust with admixture of pigment to match with marble complete all as specified and as directed.

M&L for Machine cut Kota stone slab flooring 20-25 mm thich laid over 20 mm thick cement screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L for 25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone agg ) as in leveling course , finished even & rough complete all as specified and directed.

M&L for 75mm thick cement concrete type D2 1:4:8 using 40 mm graded aggregate as in sub base complete all as specified and as directed.

M&L for 60 mm thick machine pressed precast concrete interlocking paver block factory manufactured (ISI Marked) any shape and size conforming to IS 15658-2006 of M-35 Grade,casted with grey cement and top layer with grey cement & without pigment floor,pavement,etc over and including 50 mm thick sand cushioning complete all as specified and as directed.

Coloured Chequered cement concrete tiles machine pressed of size 25cmx 25cmx 22mm thick with grey cement, set jointed & pointed in neat cement slurry and pointed with coloured cement to match and laid over and including 15mm thick screed bed in cement mortar 1:4 (1 cement : 4 coarse sand) complete all as specified and as directed.

M&L for Plain cement concrete 1:2:4 , B-1 using 20mm graded stone aggregate as, coping, weathering slighting rounded or chamfered angles and throating complete all as specified and as directed.

M & L for 75mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection finishing the exposed surfaces fair and even complete all as specified and as directed.

M & L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, at the junction of plinth protection surfaces complete all as specified and as directed.

M&L, Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less - 150mm thick including neccessary steel form work, Finishing surfaces of concrete road, pavmenet by brooming complete all as specified and directed by Engr-in-Charge.

M&L, Forming Contraction (Dummy) joints 150mm deep x 10mm wide, filled with sealing compound of Grade 'A'. complete all as specified and as directed.

M&L for Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow

M&L for Brick work with old size fly ash bricks, class 7.5, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 (01 cement : 06 coarse sand) complete all as specified and as directed.

M&L Rendering 15 mm thick on fair faces of brick or concrete surfaces in CM 1:4 finished fair and even (external surfaces) complete all as specified and as directed.

M &L Rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement (Internal surfaces) complete all as specified and as directed.

M&L for Rendering cement plaster 10mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on ceiling, surface finished even and smooth without using extra cement, complete all as specified and directed. all as specified.

Preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint finished smooth with sand paper complete all as specified and directed.

M&L for Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for Preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment of old surface of internal surface of walls including brooming down/steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and treading oil and greasy spots and cleaning with water on wall and preparation of surface of walls and applying 3mm thic interior wall care putty and applying and Interior wall textured paint with one coat of primer following by two coat of 100% royal emulsion paint i.e one coat of base coat and oterh is top coat finishing with required desgin as per user with good finishs complete all as specified and as directed Make of paint : Asian paint Royal Play Series or equivalent series of make mention Appx complete all as specified and as directed.

S&F in repair for Mild steel galvanised iron tubings (ISI Marked) 15mm dia medium grade with all fittings & fixtures complete to walls/ ceilings or laid in floors including taking down complete all as specified and as directed.

S&F in repair for Mild steel galvanised iron tubings (ISI Marked) 20mm dia medium grade with all fittings & fixtures complete to walls/ ceilings or laid in floors including taking down complete all as specified and as directed.

S & F in Reapir for 25mm bore Unplasticised PVC pipes including all fittings of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,complete to walls/ ceilings or laid in floors including taking down complete all as specified and as directed.

S & F in repair for 20mm bore Unplasticised PVC pipes including all fittings of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,complete complete to walls/ ceilings or laid in floors including taking down complete all as specified and as directed.

S & F in repair for 15mm bore Unplasticised PVC pipes including all fittings of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,complete acomplete to walls/ ceilings or laid in floors including taking down complete all as specified and as directed.

S&F in repair PVC bib taps PTMT (Symet) 15mm dia (Any Colour) screwed down for iron pipem or for brass ferrule complete all as specified and as directed.

S&F in repairs 15mm dia Pillar tap standard of PTMT any colour screwed for iron pipe (minimum weight 15 mm -110 gm) complete all as specified and as directed.

S&F in repairs 15mm dia stop valve of PTMT any colour screwed for iron pipe and fixed (minimum weight 15 mm -90 gm) complete all as specified and as directed.

S&F in repairs 15mm dia angle valve of PTMT any colour screwed for iron pipe and fixed (minimum weight 15 mm -90 gm) complete all as specified and as directed.

S&F in repairs Swivel shower of PTMT any colour for fixing with 15 mm pipe ( minimum weight 40 gm) complete all as specified and as directed.

S&F in repair for bib taps, cromimum plated cast copper alloy, screwed down, screwed for iron pipe of 15mm bore all as specified or as directed.

S&F in repair 15mm dia chromium plated pillar taps, cast copper alloy with capstan heads screwed down high pressure, with or without lettered 'Hot' of cold with long screed shanks and fly nuts screwed for iron pipe and fixed with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs Brass chromium plated shower rose 125mm size swivel type complete all as specified and as directed.

S&F in repair for Stop valves/ angle valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete all as specified and as directed.

S&F in repair in CP two way bib tap of 15mm dia. screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete all as specified and as directed.

S&F in Repair for 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete, all as specified.

S&F in repair for Gun metal globe or gate valves (ISI-marked), cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union of 20 mm bore and fixed in repairs, complete all as specified and as directed.

S & F in repairs Vitreous china squatting pan of 'Orissa' pattern of size 580x 440mm white with "integral foot rests, complete incl provision of lime concrete bedding complete all as specified and as directed.

S & F in repairs Vitreous china water closet pan (pedestal pattern), white including fixing bolts, plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S & F in repairs PVC valve less flushing cistern syphonic action type, low level, inlet, ball valve, float & handle 10 litre capacity including brackets, flush pipe and all accessories complete all as specified and as directed.

S & F in repairs sinks with drainage board made of stainless steel sheet 1mm thick for kitchen fixed with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair vitreous china wash basin (WHB) , white , flat back , size 550 mm x 400 mm excluding supply of taps, but including waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and flt nuts , flange end embedded in red lead cement and other end fixed , chain and plug and porcelain stopper and brackets including cutting for and pinning in ends of brackets or erecting stand , making connections to waste and supply pipes and complete all as specified and directed

S & F in repair vitreous china urinal bowl (back or corner wall type) type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement complete all as specified and as directed.

S & F in repair 32mm bore PVC waste pipe for sink / wash basin 90cm long complete all as specified and as directed.

S & F in repairs plastic water closet seat cover, black or white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S & F in repairs rotational moulded polyethylene water storage tank ( cylindrical vertical with closed top) hoisted and fixed in position of 500 litres capacity confiring to IS specification and incl Dismantling water tanks and removing to store complete all as specified and as directed.

S & F in repairs rotational moulded polyethylene water storage tank ( cylindrical vertical with closed top) hoisted and fixed in position of 1000 litres capacity confiring to IS specification and incl Dismantling water tanks and removing to store complete all as specified and as directed.

S & F in repairs 25mm bore, ball cock, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and as directed.

S & F in repairs 20mm bore, ball cock, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and as directed.

S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. .

S & F PVC (SWR) pipes in any length with or without ears, with rubber ring joints 75mm dia fixed to walls including taking down existing unserviceable pipescomplete all as specified and as directed.

S & F PVC (SWR) pipes in any length with or without ears, with rubber ring joints 110mm dia fixed to walls including taking down existing unserviceable pipes complete all as specified and as directed.

S & F in repairs PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.

S & F in repairs PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.

S & F in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement of diameter of outlet 75mm dia complete all as specified and directed.

S & F in repairs of 2-in-1 faucet with 1.5m tube and hook complete all as specified and directed.

S & F water storage tank lid fit for any sizes complete all as specified & directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia D type, 60cm long between flanges of cupboard complete all as specified and directed.

S&F toilet cabinet of size 350x450mm PVC body with shelf assembly mirror mounted as shutter etc complete all as specified and directed.(Make : Prayag / COMMANDER)

S&F in repairs Stainless steel plate rack of size 900X800X230mm with screws and necessary fittings incl cutting to hole fixed to wall complete all as specified and directed.

Disconnecting and cleaning of HDPE tank of capacity exc 250 litre and n. exc 500 litres cleaning and removing all scale and dirt from wall and floors by rubbing with brushes, cleaning with caustic soda etc etc complete and finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc and refxing same position to adistance not exceeding 50m and deposting complete all as specified and as directed.

Disconnecting and cleaning of HDPE tank of capacity exc 500 litres and n. exc 1000 litres cleaning and removing all scale and dirt from wall and floors by rubbing with brushes, cleaning with caustic soda etc etc complete and finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc and refixing the same in position to a distance not exceeding 50m and deposting complete all as specified and as directed.

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L, Preparation of new steel surfaces and applying 2 coats of synthetic enamel paint on steel surfaces over 10cm width or girth (not otherwise described) over a coat of red oxide primer complete all as specified and as directed.

Supply and fixing Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall fixed with self tapping screws all as specified and as directed.

Supply and fixing in repairs Pre-painted galvalume aluminium zinc coating GI based ridge with plain steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed.

Supply and fixing in repairs Pre-painted galvalume aluminium zinc coating GI based valley gutters plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa fixed with self tapping screws complete all as specified and directed.

Supply & Fix 06 mm thick plain, multicavity poly carbonate sheet (coloured) in roof covering, fixed with and including aluminium fillets at joints and aluminium angles at the end, fixed with screws and standard fittings, fixtures and accessories complete all as specified and directed.

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with fixed with L-type or J-type or cranked hook bolts in lieu of screw coach screw and washer in roof, wall etc complete all as specified and as directed.

Supply and fix vertical blind with aluminium powder coated channel & PVC runners and fabric blinds fixed to window as per manufacture instruction complete including taking down old vertical blind. complete all as specified and directed.

S&F false ceiling of Non asbestos fibre cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600 mm x 600 mm x 4 mm thick fixed over snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 600mm X 600mm . The aluminium fram work will supported on side wall with the used of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long including necessary removal of existing electrical fittings and re-fixing in position without disturbing existing connected fittings complete all as specified and directed.

SUNLEY CONSTRUCTIONS (BID ID -3291322)

SAMYDOSS CONSTRUCTIONS (BID ID -3291232)

M/s Omm Muruga Enterprises (BID ID -3291079)

Mariammal Constructions (BID ID -3290589)

S K ENTERPRISES (BID ID -3290786)