REPAIR/REPLACEMENT OF FENCING/ COMPOUND WALL, DRAIN, PATHWAYS, HARDSTANDING AND OTHER MISC B/R WORKS AT HANUMAN TEMPLE AREA, 125 TA BN, 259 FD WK SHOP, ASRI, ARO ETC UNDER AGE B/R (SOUTH) NO.I OF GE (SOUTH) SECUNDERABAD

Amount

Dismantling of mild steel/structural steel work of any description incl door/gates/grills/fencing post etc complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed

Excavation post holes or similar works, each n.exc. 0.5Cum, getting out soft/loose soil. Returning, filling in and ramming earth or broken rubble mixed with earth around, in layers. exc. 25cm and watering and removing surplus soil to a distance not exceeding 50m and making good surfaces. complete all as specified and as directed.

Supply, fabricate and fixing in position angle iron posts for fencing posts and struts including flat iron etc and including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets for securing fencing including all necessary welding , drilling, bolting or riveting (Steel confirming to Fe-290 (Gde E-165)) complete all as specified and as directed.

Supply only galvanised chain link fencing, of any size as complete all as specified and as directed.

Fixing only chain link fening including line wires, any mesh, size type to any type of standards, rails,straining bolts, etc. including provision of binding wire complete all as specified and as directed.

S&F in repairs Galvanized 2 stranded steel barbed wire 2.24 mm dia ,barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standards, rails, straining bolts including securing or tying at the crossing with and provision of Galvanized MS wires or steel pins (Each line of barbed wire to be measured separately) complete all as specified and as directed.

S & F for 10mm dia MS round bar for tighting/securing fencing wire etc,including two coats of synthetic enamel mpaint over a coat of red oxide complete all as specified and as directed.

M & L for Mild steel screw bolts (machine made) with hexagonal or square head one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long diameter of neck in exc 16mm and n.exc 20 mm complete all as specified and as directed.

S&F for Framed work such as grills, gratings, Gate etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders; framed balusters, walk ways, railings; amework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Demolition of Bricks or stone masonry built in cement mortar complete all as specified.

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) as in manholes, septic tank, filter bed, walls, drains etc complete all as specified and as directed.

M&L for walling of squared rubble masonary (Secunderabad type) , recangular coursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry with solid blocks type C1 (1:3:6) (using 20mm graded crushed stone aggregate) set in CM 1:6, exc. 10 cm in width and setting in mortar, complete all as specified and as directed.

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in external surfaces of man holes, septic tank, filter bed etc incl removing of debrie complete all as specified and as directed.

M&L Rendering 15mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces even and smooth without using extra cement as in manholes, septic tank, filter bed out let drain complete all as specified and as directed.

M&L for flush pointing to squared rubble masonry coursed or uncoursed in CM (1:3) complete all as specified and as directed

Demolition of cement concrete (un-reinforced ) in ground floors and pavings not exceeding 15cm thick(below or above ground level ) complete all as specified and as directed.

M&L for cement concrete Type C-2, 1:3:6 (using 40 mm graded crushed stone aggregate) in foundation of post concrete and mass concrete complete all as specified and directed

M&L for Plain cement concrete type C2(1:3:6)( using 40mm graded crushed stone aggregate) as in surface chanels and drains complete all as specified and as directed.

M & L Plain cement concrete type-B1(1:2:4) (using 20mm graded crushed stone aggregate ) as in benching coping etc incl necessary form work.complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and as directed.

M&L for 100mm thick PCC (1:2:4) type B2 (using 20mm graded crushed stone aggregate) as in floor, hard standing including use of formwork and finishing surfaces even and smooth complete all as specified and as directed.

M&L for 150mm thick PCC 1:2:4 (using 20m graded crushed stone aggregate) as in paving/hardstanding including use of necessary form work complete all as specified and as directed.

M&L for forming 12mm thick Expansion joints for150mm thick filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing com pound, Grade ‘A’ complete all as specified and as directed.

S&F TMT bars 10 mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate as in 75mm thick as in sub base complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

S&F for chequered cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigment set jointed and pointed in neat cement slurry laid over and including 20 mm thick screed bed of cement mortor (1:6) in floors complete all as specified and as directed.

M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of old steel surfaces over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of old surfaces of concrete and plastered surface exceeding 10 cm in width or girth and applying one coats of synthetic enamel paint over one coat of primer complete all as specified and directed.

M&L for preparation of newly plastered wall surface and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparation of old surfaces of walls and applying one coat of cement base paint including filling of cracks, holes and including leveling the surface which undulation found with cement putty etc. complete all as specified and as directed.

M&L for preparation of old surfaces of walls and applying two coat of cement base paint including filling of cracks, holes and including levelling the surface wherever undulation found with cement putty etc complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joint slaid in trenches or in floors complete all as specified and as directed.

M/S DIVIJA BUILDERS (BID ID -3399005)

ATUL ENTERPRISES (BID ID -3398756)

NARAYANA CONSTRUCTIONS (BID ID -3399262)

R G NAIDU CIVIL CONTRACTOR AND BUILDERS (BID ID -3406985)

M/s G SATISH REDDY AND CO (BID ID -3398795)

PARDEEP AND CO (BID ID -3399448)

KIRAN CONSTRUCTIONS (BID ID -3407108)

BEEGEE DESIGN SYSTEMS (BID ID -3399020)

harshraj and co (BID ID -3405945)