Loading
Loading…
Loading…
Tender Value
₹10.4 L
EMD Value
₹20,900
Closing Date
3 Aug 2026, 12:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
10 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
AFFIDAVIT :- The tenderers shall submit a copy of certificate stating that all their statements/ documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V (attached). Non submission of above certificate by the bidder shall result summarily rejection of his/ their BID. It shall be mandatory incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested / digitally signed by which the / he is qualifying the qualifying criteria mentioned in the tender document. (Ref: GCC April 2022 (updated upto ACS - 11, dtd. 13.03.2026 or latest).
The authority for the acceptance of the tender will rest with the Railway. It shall not be obligatory on the said authority to accept the lowest tender or any other tender and no tenderer(s) shall demand any explanation for the cause of rejection of his/their tender nor the Railway undertake to assign reasons for declining to consider or reject any particular tender or tenders.
If the tenderer(s) deliberately gives/give wrong information in his/their tender or creates/create circumstances for the acceptance of his /their tender, the Railway reserves the right to reject such tender at any stage.
Bidder must be filled properly the format (i.e. Annexure - D) for declaration of association with Railway officers and then upload through E-Tendering duly digitally signed of authorized bidder. Otherwise offer of the firm shall be considered as invalid.
The entire Form Of Tender (FOT, here under Chapter-I, page no. 3 - 10 of this BID) must be uploaded through e - Tendering duly filled and digitally signed. Otherwise offer of the firm shall be considered as invalid.
Valid Electrical Contractor license in the name of the firm issued by State / Central Government must be uploaded through e- Tendering duly digitally signed. Otherwise offer of the firm shall be considered as invalid.
If the firm is a Partnership firm/Joint Venture (JV)/Hindu Undivided family (HUF)/Limited Liability Partnership (LLP) etc., the tenderers shall submit a copy of certificate that has to be given by attorney/authorized signatory/each member of Partnership firm/Joint Venture (JV)/Hindu Undivided family (HUF)/Limited Liability Partnership (LLP) etc. enclosed as Annexure-V/A (attached). Non submission of above certificate by the bidder shall result summarily rejection of his/ their BID.
Scanned copy of valid GST (Goods & Service Tax) Registration Certificate.
Documents in support of following shall be included along with tender document :- i) Copy of Valid Trade License (Digitally Signed). ii) Copy of PAN (Digitally Signed). iii) Copy of Credential if any (Digitally Signed). iv) Copy of Last year IT return (Digitally Signed).
PROVISION OF STREET LIGHT FOR THE ROAD CONNECTED TO CS HWH WITH BENARAS ROAD.
ELS-HWH-10-569-EMU
ELS-HWH-10-569-EMU
Open
Works - General
180 Days
Howrah, West Bengal
₹0
₹20,900
3 Aug 2026
10 Jul 2026
20 Jul 2026
27 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 10,43,428.39 | ||
| — | 12.00 | — | — | ||
| GI Tubular Pole of overall length 3M with single/Double arm bracket with top cover including hinged door in built in Box complete with copper bar / Insulator/Hylam Sheet for cable termination and fuse kit-Kat/MCB. Make : BP Project/ Utkarsh or similar. | — | — | — | 77,136 | |
| — | 12.00 | — | — | ||
| RCC Foundation, erection, testing and commissioning of Pole with construction of cement concrete muffing (Cement : Stone : Sand = 1 : 2 : 4) including earthing of pole with 1 no. 50mm dia heavy gauge GI pipe x 3M long and necessary earth connection by GI strip. | — | — | — | 36,605.28 | |
| — | 24.00 | — | — | ||
| Supply,Fixing ,Connection and commissioning of Street light 60 Watt LED (Type of LED - Surface Mounting Device) luminaire, pressure die cast housing with Ingress Protection - IP66 or higher (LED make: - Nichia, Osram, Seoul, Philips, Lumileds, Avago, Cree ) complete with all accessories. LED Efficacy -Minimum 120 Lumens/watt @ 350mA, Impact Resistance: IK-05 or higher Color temperature: 5700K, Driver Surge Protection minimum 4KV, Life span of LED chip - Greater than 50000 burnings hours with 60 months warranty. | — | — | — | 17,140.08 | |
| — | 24.00 | — | — | ||
| Supply,Fixing ,Connection and commissioning of outdoor luminaries with flood light 300Watt LED ( Type of LED : surface mounting device) luminaries with industrial grade constant current driver (Efficiency : Minimum 85%). Make: Philips/ Holonix/Syska/ Haveles. Life span of LED chip - Greater than 50000 burnings hours with 60 months warranty. | — | — | — | 68,479.68 | |
| — | 600.00 | — | — | ||
| Supply of Cross linked polythelene (XLPE) insulatd , PVC outer sheathed stranded, non -magnetic,standered ,circular aluminium conductor cable of size 4 core ,25 sq.mm with galvanized steel strip aroumoured suitable for rated voltage at 1100 voltts grade and confirmimg to IS 7098 Part-1-1988 with ammendement number 1 and 2 and 3 Reaffirmed 2005. Make: Havells/KEI/Polycab/Gloster. | — | — | — | 1,74,600 | |
| — | 400.00 | — | — | ||
| Trenching and laying of cable under ground by soil cutting through suitable dia HDPE pipe including refiling of trench by exavated soil and make good of surface as its original condition. Make: M/s.Sudhakar /Nagarjuna /Nandi/ Polymers/Narmada /KC polymer . | — | — | — | 62,900 | |
| — | 100.00 | — | — | ||
| Trenching and laying of cable under ground through 100mm dia HDPE pipe by Micro tunneling cable laying method including supply and joint of HDPE pipe: Make M/s. Sudhakar/Nagarjuna/Nandi/ Polymers/Narmada/KC polymer. | — | — | — | 1,42,612 | |
| — | 300.00 | — | — | ||
| Trenching and lying of cable under ground by soil cutting crossing through 100 mm dia GI Pipe (medium Gauge) includig make good of road surfac/track. | — | — | — | 1,45,566 | |
| — | 1.00 | — | — | ||
| LT cubicle type distribution panel board made of 14 swg (2mm) MS sheet duly powder coated comprising with following: a) MCCB , 4P, 160-200, 415 v, 50 HZ, 36A- 02 nos. b) MCCB , 4P, 50-63A, 415 v, 50 HZ, 25KA, - 6 Nos. c) Tinned Copper Busbar (4nos. Bar) each of capacity 300A, 415, 50 Hz: - 1set. | — | — | — | 1,07,750 | |
| — | 1.00 | — | — | ||
| Earthing by two nos. GI pipe 50mm dia x 3M long heavy gauge (Make:Tata/Jindal) including construction of one earth pit along with necessary earth connection from pit by 25mm x 4mm GI flat with GI nuts & bolts. | — | — | — | 2,300.31 | |
| — | 2.00 | — | — | ||
| MS Box of size 1950mm (L) X 575mm (H) X 420mm (W) for lighting arragement for Rolling in/Out examination with 'V' shape top cover of suitavle size.(The box will be made from MS sheet of 2mm thickness 'MS flat of size 30mmX6mm, MS angle of size 25mmX25mm X5mm. Front cover-MS expended materials 2.54 cmX2.54cm suitable hinge.Back Cover-MS Sheet 2mm with 2.54cm dia perfortion ,Fitment of light -Flat of size 30X6mm and Angle of size 50mmX50mmX6mm to be fitted inside the box for fitting of LED light, Paints -Reflection pain to be painted inside the box,PU paint to be painted after propoer treatment of sheet at outside the box) including designe,fabrication and installation of MS Box. | — | — | — | 15,326 | |
| — | 2.00 | — | — | ||
| Outdoor pillar box type control panel board made of 14SWG (2mm) MS sheet duly powder coated comprising with the following. a) MCCB with Thermal-Magnetic Release of breaking capacity 36kA at 415 AC, 50Hz(lcs=100% lcu ) suitable for releasae range 25-32A ,4 pole -1 no. b)Astronomical Timer Switch-2 nos. c) Power Contractor ,3pole ,18A, 415V, 50HZ-2 nos. d) LED indication lamp for 3-Phases for incoming feeders and "ON OFF, TRIP" indication for all incoming and outgoing feeders.-10 nos. Complete with fabrication ,internal wiring by single core copper conductor cable and all other accessories for above panel. | — | — | — | 33,846 | |
| — | 1.00 | — | — | ||
| GST@ 18% on Rs.884261.35 | — | — | — | 1,59,167.04 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
BIDDOC569.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .